* [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :(
@ 2007-07-31 8:35 Gleb Kulikov
2007-07-31 8:46 ` Шишков Евгений
` (2 more replies)
0 siblings, 3 replies; 22+ messages in thread
From: Gleb Kulikov @ 2007-07-31 8:35 UTC (permalink / raw)
To: ALT Linux Community, sisyphus
Джентельмены,
я правильно понимаю, что ни 4, ни тем более, 3, инсталлировать на ноут ASUS
X50VSeries, не получится?
жёсткий диск отображается (меню биос - настройки жёсткого диска) на 3 мастер,
на 1-ом мастере, DVD.
инталлятор, жёсткого диска не видит.
Нет доступа к жёсткому диску, и при загрузке в лайв-сиди.
--
Салют, /GLeb
UIN: 15341920
jabber://gleb@asd.iao.ru
sip://2387245@sipnet.ru (telephony)
skype://gleb_kulikov.tomsk (telephony)
sip://20000204@sip.pctel.ru (telephony)
netmail: 2:5005/78
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-07-31 8:35 [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( Gleb Kulikov @ 2007-07-31 8:46 ` Шишков Евгений 2007-07-31 13:01 ` Gleb Kulikov 2007-08-01 6:50 ` [sisyphus] [Comm] desktop/server 4 OR compact3 " Aleksey Novodvorsky 2007-08-01 8:05 ` Aleksey Novodvorsky 2 siblings, 1 reply; 22+ messages in thread From: Шишков Евгений @ 2007-07-31 8:46 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list Gleb Kulikov пишет: > Джентельмены, > > я правильно понимаю, что ни 4, ни тем более, 3, инсталлировать на ноут ASUS > X50VSeries, не получится? > > жёсткий диск отображается (меню биос - настройки жёсткого диска) на 3 мастер, > на 1-ом мастере, DVD. > > инталлятор, жёсткого диска не видит. > Нет доступа к жёсткому диску, и при загрузке в лайв-сиди. > Ну Вы распишите немного про него. Точная модель (а не Series)? Что за чипсет? ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-07-31 8:46 ` Шишков Евгений @ 2007-07-31 13:01 ` Gleb Kulikov 2007-08-01 5:03 ` Шишков Евгений ` (3 more replies) 0 siblings, 4 replies; 22+ messages in thread From: Gleb Kulikov @ 2007-07-31 13:01 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list В сообщении от Вторник 31 июля 2007 Шишков Евгений написал: > Gleb Kulikov пишет: > > Джентельмены, > > > > я правильно понимаю, что ни 4, ни тем более, 3, инсталлировать на ноут > > ASUS X50VSeries, не получится? > > > > жёсткий диск отображается (меню биос - настройки жёсткого диска) на 3 > > мастер, на 1-ом мастере, DVD. > > > > инталлятор, жёсткого диска не видит. > > Нет доступа к жёсткому диску, и при загрузке в лайв-сиди. > > Ну Вы распишите немного про него. > Точная модель (а не Series)? > Что за чипсет? Популярнейшие машинки бюджетной серии. Собственно, у нас на работе мужик принёс, и опс... пролёт. Кстати, звук не работает тоже (нет микшера, хотя модули альзы встают), набортная видеокамера, также себя никак не проявляет. модель X50V MB Ver. : F5V ID:2C 76N0AS066825 CheckNumber6519 CPU Inel T2130 00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0671 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller 01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 718a 02:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c (rev 01) Linux version 2.6.18-std-smp-alt6 (builder@hint1.office.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Sun Apr 29 00:41:18 MSD 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) BIOS-e820: 000000003ffbe000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 262064 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32688 pages, LIFO batch:7 DMI present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f8db0 ACPI: RSDT (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0000 ACPI: FADT (v002 040207 FACP0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0200 ACPI: MADT (v001 040207 APIC0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0390 ACPI: MCFG (v001 040207 OEMMCFG 0x20070402 MSFT 0x00000097) @ 0x3ffb03f0 ACPI: SLIC (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0430 ACPI: WDRT (v001 040207 OEMWDRT 0x20070402 MSFT 0x00000097) @ 0x3ffb05b0 ACPI: BOOT (v001 040207 BOOT0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0600 ACPI: OEMB (v001 040207 OEMB0939 0x20070402 MSFT 0x00000097) @ 0x3ffbe040 ACPI: DSDT (v001 A0714 A0714002 0x00000002 INTL 0x20051117) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000) Detected 1866.276 MHz processor. Built 1 zonelists. Total pages: 262064 Kernel command line: BOOT_IMAGE=alt0/vmlinuz vga=0x314 lang=ru automatic=method:cdrom initrd=alt0/full.cz live fastboot stagename=live mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1031660k/1048256k available (1585k kernel code, 15944k reserved, 640k data, 192k init, 130752k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3734.39 BogoMIPS (lpj=7468787) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code checking if image is initramfs... it is Freeing initrd memory: 3753k freed ACPI: Core revision 20060707 ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist. CPU0: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3732.57 BogoMIPS (lpj=7465147) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c Total of 2 processors activated (7466.96 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=434 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: a000-afff MEM window: fa900000-fa9fffff PREFETCH window: aff00000-bfefffff PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: faa00000-faafffff PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: b000-cfff MEM window: fab00000-feafffff PREFETCH window: bff00000-dfefffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag value 0xc0 read from CMOS RAM was invalid Simple Boot Flag at 0xff set to 0x1 audit: initializing netlink socket (disabled) audit(1185912994.772:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie02] vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 3750k, total 16384k vesafb: mode is 800x600x16, linelength=1600, pages=16 vesafb: protected mode interface info at c000:aac2 vesafb: pmi: set display start = c00cab4a, set palette = c00cac06 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 150058 bytes,<6>...found (800x600, 27802 bytes, v3). Console: switching to colour frame buffer device 97x34 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 192k freed Executing init=/init input: AT Translated Set 2 keyboard as /class/input/input0 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:03.3[C] -> GSI 22 (level, low) -> IRQ 201 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:03.3: irq 201, io mem 0xfebfd000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb 1-8: new high speed USB device using ehci_hcd and address 3 usb 1-8: configuration #1 chosen from 1 choice ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 209 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.0: irq 209, io mem 0xfebff000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 217 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.1: irq 217, io mem 0xfebfe000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected usb 3-2: new low speed USB device using ohci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Logitech Logitech USB Optical Mouse as /class/input/input1 input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:03.1-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 1 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS968 ATA 133 (2nd gen) controller ide0: BM-DMA at 0xffe0-0xffe7, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Probing IDE interface ide1... usbcore: registered new driver libusual Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning Vendor: Generic- Model: xD/SDMMC/MS/Pro Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 usb-storage: device scan complete ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A loop: loaded (max 8 devices) squashfs: version 3.2 (2007/01/02) Phillip Lougher Real Time Clock Driver v1.12ac input: PC Speaker as /class/input/input2 sd 0:0:0:0: Attached scsi removable disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 ts: Compaq touchscreen protocol output Linux agpgart interface v0.101 (c) Dave Jones ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:00:0d.0: Try the "8139too" driver instead. wlan: 0.8.4.2 (0.9.3.1) 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 225 eth0: RealTek RTL8139 at 0xf8822c00, 00:1b:fc:48:37:09, IRQ 225 eth0: Identified 8139 chip type 'RTL-8100B/8139D' ath_pci: 0.9.4.5 (0.9.3.1) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:02:00.0 to 64 ath_rate_sample: 1.2 (0.9.3.1) wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 10.0 phy 6.1 radio 10.2 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 wifi0: Atheros 5424/2424: mem=0xfaaf0000, irq=233 ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:0f.0 to 64 input: SynPS/2 Synaptics TouchPad as /class/input/input3 hda_codec: Unknown model for ALC861, trying auto-probe from BIOS... Registering unionfs 1.4 unionfs: debugging is not enabled device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes. [fglrx] module loaded - fglrx 8.36.5 [Apr 17 2007] on minor 0 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 233 [fglrx] total GART = 130023424 [fglrx] free GART = 114032640 [fglrx] max single GART = 114032640 [fglrx] total LFB = 66977792 [fglrx] free LFB = 52588544 [fglrx] max single LFB = 52588544 [fglrx] total Inv = 0 [fglrx] free Inv = 0 [fglrx] max single Inv = 0 [fglrx] total TIM = 0 ACPI: AC Adapter [AC0] (on-line) QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard KQEMU installed, max_locked_mem=517936kB. bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 150058 bytes,<6>...found (800x600, 27802 bytes, v3). bootsplash: status on console 1 changed to on hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 usb 1-1: new high speed USB device using ehci_hcd and address 4 usb 1-1: configuration #1 chosen from 1 choice scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning Vendor: USB Model: FLASH DISK Rev: 2.00 Type: Direct-Access ANSI SCSI revision: 02 ready SCSI device sdb: 256000 512-byte hdwr sectors (131 MB) sdb: Write Protect is off sdb: Mode Sense: 03 00 00 00 sdb: assuming drive cache: write through SCSI device sdb: 256000 512-byte hdwr sectors (131 MB) sdb: Write Protect is off sdb: Mode Sense: 03 00 00 00 sdb: assuming drive cache: write through sdb: sdb1 sdb2 sd 1:0:0:0: Attached scsi removable disk sdb sd 1:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete EXT2-fs warning: mounting fs with errors, running e2fsck is recommended EXT2-fs error (device sdb2): ext2_check_page: bad entry in directory #2: unaligned directory entry - offset=0, inode=4294967295, rec_len=65535, name_len=255 EXT2-fs error (device sdb2): ext2_readdir: bad page in #2 -- Салют, /GLeb UIN: 15341920 jabber://gleb@asd.iao.ru sip://2387245@sipnet.ru (telephony) skype://gleb_kulikov.tomsk (telephony) sip://20000204@sip.pctel.ru (telephony) netmail: 2:5005/78 ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-07-31 13:01 ` Gleb Kulikov @ 2007-08-01 5:03 ` Шишков Евгений 2007-08-01 5:42 ` Gleb Kulikov 2007-08-01 5:44 ` Gleb Kulikov 2007-08-13 10:58 ` Хихин Руслан ` (2 subsequent siblings) 3 siblings, 2 replies; 22+ messages in thread From: Шишков Евгений @ 2007-08-01 5:03 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list Gleb Kulikov пишет: > Кстати, звук не работает тоже (нет микшера, хотя модули альзы встают), > набортная видеокамера, также себя никак не проявляет. > > модель X50V > MB Ver. : F5V ID:2C > 76N0AS066825 > CheckNumber6519 > > CPU Inel T2130 > > 00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0671 > 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] > (rev 01) > 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) > 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller > (rev 0f) > 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller > (rev 0f) > 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller > 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE > mode (rev 03) > 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller > 01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 718a > 02:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c > (rev 01) >SIS5513: SiS968 ATA 133 (2nd gen) controller > ide0: BM-DMA at 0xffe0-0xffe7, BIOS settings: hda:DMA, hdb:DMA > Probing IDE interface ide0... >hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) >Uniform CD-ROM driver Revision: 3.20 СD нашёл. А винта нету. Есть ссылка вот такая: http://lists.altlinux.ru/pipermail/community/2001-January/003036.html Что-то подобное обсуждали. А до этого какая операционка стояла? И был ли виден винт? Ноут не разбирали? А то может и CD и HDD как Primary Master? ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-01 5:03 ` Шишков Евгений @ 2007-08-01 5:42 ` Gleb Kulikov 2007-08-01 5:44 ` Gleb Kulikov 1 sibling, 0 replies; 22+ messages in thread From: Gleb Kulikov @ 2007-08-01 5:42 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list В сообщении от Среда 01 августа 2007 Шишков Евгений написал: > СD нашёл. а то :) > А винта нету. вот именно. > А до этого какая операционка стояла? И был ли виден винт? конечно. виста хоум. > Ноут не разбирали? А то может и CD и HDD как Primary Master? нет, новьё. винт, похоже, САТА, эмулируется как 3-ий мастер. PS: самое обидное, довольно древняя win xp встаёт, как влитая. Не на сата, на эмуляцию. Неужели нет способа сказать линю, вставать на эмулируемый IDE? -- Салют, /GLeb UIN: 15341920 jabber://gleb@asd.iao.ru sip://2387245@sipnet.ru (telephony) skype://gleb_kulikov.tomsk (telephony) sip://20000204@sip.pctel.ru (telephony) netmail: 2:5005/78 ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-01 5:03 ` Шишков Евгений 2007-08-01 5:42 ` Gleb Kulikov @ 2007-08-01 5:44 ` Gleb Kulikov 2007-08-01 6:36 ` Шишков Евгений 1 sibling, 1 reply; 22+ messages in thread From: Gleb Kulikov @ 2007-08-01 5:44 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list В сообщении от Среда 01 августа 2007 Шишков Евгений написал: > А винта нету. ЗЫ: машинка (модель), судя по магазинам, сверхпопулярная. Обидно, что свежевышедший дистрибутив не может встать на неё хотя бы в усечённом варианте. -- Салют, /GLeb UIN: 15341920 jabber://gleb@asd.iao.ru sip://2387245@sipnet.ru (telephony) skype://gleb_kulikov.tomsk (telephony) sip://20000204@sip.pctel.ru (telephony) netmail: 2:5005/78 ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-01 5:44 ` Gleb Kulikov @ 2007-08-01 6:36 ` Шишков Евгений 2007-08-01 7:51 ` Gleb Kulikov 0 siblings, 1 reply; 22+ messages in thread From: Шишков Евгений @ 2007-08-01 6:36 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list Gleb Kulikov пишет: > В сообщении от Среда 01 августа 2007 Шишков Евгений написал: > >> А винта нету. > > ЗЫ: машинка (модель), судя по магазинам, сверхпопулярная. Обидно, что > свежевышедший дистрибутив не может встать на неё хотя бы в усечённом > варианте. > А зайдите в BIOS и посмотрите настройки на предмет AHCI. Надо выключить. ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-01 6:36 ` Шишков Евгений @ 2007-08-01 7:51 ` Gleb Kulikov 0 siblings, 0 replies; 22+ messages in thread From: Gleb Kulikov @ 2007-08-01 7:51 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list В сообщении от Среда 01 августа 2007 Шишков Евгений написал: > А зайдите в BIOS и посмотрите настройки на предмет AHCI. > Надо выключить. Этих настроек нет. -- Салют, /GLeb UIN: 15341920 jabber://gleb@asd.iao.ru sip://2387245@sipnet.ru (telephony) skype://gleb_kulikov.tomsk (telephony) sip://20000204@sip.pctel.ru (telephony) netmail: 2:5005/78 ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-07-31 13:01 ` Gleb Kulikov 2007-08-01 5:03 ` Шишков Евгений @ 2007-08-13 10:58 ` Хихин Руслан 2007-08-14 3:30 ` Gleb Kulikov 2008-04-22 3:54 ` [sisyphus] desktop/server 4 " Gleb Kulikov 2008-04-22 11:19 ` Gleb Kulikov 3 siblings, 1 reply; 22+ messages in thread From: Хихин Руслан @ 2007-08-13 10:58 UTC (permalink / raw) To: sisyphus [-- Attachment #1: Type: text/plain, Size: 1323 bytes --] Здравствуйте Gleb Kulikov В сообщении от 31 июля 2007 Gleb Kulikov написал(a): > 00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device > 0671 > > 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI > bridge > > 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL > Media IO] > > (rev 01) > > 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] > (rev 01) Смотрю на http://pci-ids.ucw.cz/iii/?i=1039 и пытаюсь разобраться что у вас за устройства :) Я так понимаю, что диски и разделы видны. но почему-то : >SIS5513: not 100% native mode: will probe irqs later >SIS5513: SiS968 ATA 133 (2nd gen) controller .... >SCSI device sdb: 256000 512-byte hdwr sectors (131 MB) >sdb: Write Protect is off >sdb: assuming drive cache: write through > sdb: sdb1 sdb2 >sd 1:0:0:0: Attached scsi removable disk sdb >sd 1:0:0:0: Attached scsi generic sg1 type 0 >usb-storage: device scan complete >EXT2-fs warning: mounting fs with errors, running e2fsck is recommended >EXT2-fs error (device sdb2): ext2_check_page: bad entry in directory >#2: >unaligned directory entry - offset=0, inode=4294967295, rec_len=65535, >name_len=255 >EXT2-fs error (device sdb2): ext2_readdir: bad page in #2 -- С уважением Хихин Руслан [-- Attachment #2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-13 10:58 ` Хихин Руслан @ 2007-08-14 3:30 ` Gleb Kulikov 2007-08-14 5:28 ` Хихин Руслан 2007-08-14 9:39 ` Konstantin A. Lepikhov 0 siblings, 2 replies; 22+ messages in thread From: Gleb Kulikov @ 2007-08-14 3:30 UTC (permalink / raw) To: hihin, ALT Linux Sisyphus discussion list В сообщении от Понедельник 13 августа 2007 Хихин Руслан написал: > и пытаюсь разобраться что у вас за устройства :) > > Я так понимаю, что диски и разделы видны. но почему-то : Не альтом! Это вывод, сделанный из-под Мандривы. > >SIS5513: not 100% native mode: will probe irqs later > >SIS5513: SiS968 ATA 133 (2nd gen) controller Тем не менее, работает. Из Мандривы :( PS: Справедливости ради, пробовались Федора, Сабайон и Кноппикс (диски от "Линукс-формата"). С этим оборудованием справилась только Мандрива. -- Салют, /GLeb UIN: 15341920 jabber://gleb@asd.iao.ru sip://2387245@sipnet.ru (telephony) skype://gleb_kulikov.tomsk (telephony) sip://20000204@sip.pctel.ru (telephony) netmail: 2:5005/78 ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-14 3:30 ` Gleb Kulikov @ 2007-08-14 5:28 ` Хихин Руслан 2007-08-14 9:39 ` Konstantin A. Lepikhov 1 sibling, 0 replies; 22+ messages in thread From: Хихин Руслан @ 2007-08-14 5:28 UTC (permalink / raw) To: sisyphus [-- Attachment #1: Type: text/plain, Size: 838 bytes --] Здравствуйте Gleb Kulikov В сообщении от 14 августа 2007 Gleb Kulikov написал(a): > В сообщении от Понедельник 13 августа 2007 Хихин Руслан написал: > > и пытаюсь разобраться что у вас за устройства :) > > > > > > > > Я так понимаю, что диски и разделы видны. но почему-то : > > Не альтом! Это вывод, сделанный из-под Мандривы. > > > >SIS5513: not 100% native mode: will probe irqs later > > > > > >SIS5513: SiS968 ATA 133 (2nd gen) controller > > Тем не менее, работает. Из Мандривы :( > > > > PS: Справедливости ради, пробовались Федора, Сабайон и Кноппикс > (диски от > > "Линукс-формата"). С этим оборудованием справилась только Мандрива. А интересно посмотреть dmesg под Альтом, хотя "ядерщикам" и так всё прозрачно. Я-бы повесил багу с dmesg и lsmod под Alt и под Мандривой. -- С уважением Хихин Руслан [-- Attachment #2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-14 3:30 ` Gleb Kulikov 2007-08-14 5:28 ` Хихин Руслан @ 2007-08-14 9:39 ` Konstantin A. Lepikhov 1 sibling, 0 replies; 22+ messages in thread From: Konstantin A. Lepikhov @ 2007-08-14 9:39 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list Gleb Kulikov пишет: > В сообщении от Понедельник 13 августа 2007 Хихин Руслан написал: >> и пытаюсь разобраться что у вас за устройства :) >> >> Я так понимаю, что диски и разделы видны. но почему-то : > > Не альтом! Это вывод, сделанный из-под Мандривы. > >>> SIS5513: not 100% native mode: will probe irqs later >>> SIS5513: SiS968 ATA 133 (2nd gen) controller > > Тем не менее, работает. Из Мандривы :( > > PS: Справедливости ради, пробовались Федора, Сабайон и Кноппикс (диски от > "Линукс-формата"). С этим оборудованием справилась только Мандрива. > ясно. попробую добавить поддержку этого недо-sata контроллера в наше ядро. ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] desktop/server 4 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-07-31 13:01 ` Gleb Kulikov 2007-08-01 5:03 ` Шишков Евгений 2007-08-13 10:58 ` Хихин Руслан @ 2008-04-22 3:54 ` Gleb Kulikov 2008-04-22 11:19 ` Gleb Kulikov 3 siblings, 0 replies; 22+ messages in thread From: Gleb Kulikov @ 2008-04-22 3:54 UTC (permalink / raw) To: sisyphus, ALT Linux Community general discussions, hardware В сообщении от Вторник 31 июля 2007 Gleb Kulikov написал: Коллеги, я так понимаю, ничего не изменилось? Ни 4.0.1, ни 4.0.2, ни 4.0.3 -- жёсткого диска "не видят". Мандрива (ещё 2007) -- работает без проблем. > В сообщении от Вторник 31 июля 2007 Шишков Евгений написал: > > Gleb Kulikov пишет: > > > Джентельмены, > > > > > > я правильно понимаю, что ни 4, ни тем более, 3, инсталлировать на ноут > > > ASUS X50VSeries, не получится? > > > > > > жёсткий диск отображается (меню биос - настройки жёсткого диска) на 3 > > > мастер, на 1-ом мастере, DVD. > > > > > > инталлятор, жёсткого диска не видит. > > > Нет доступа к жёсткому диску, и при загрузке в лайв-сиди. > > > > Ну Вы распишите немного про него. > > Точная модель (а не Series)? > > Что за чипсет? > > Популярнейшие машинки бюджетной серии. Собственно, у нас на работе мужик > принёс, и опс... пролёт. > > Кстати, звук не работает тоже (нет микшера, хотя модули альзы встают), > набортная видеокамера, также себя никак не проявляет. > > модель X50V > MB Ver. : F5V ID:2C > 76N0AS066825 > CheckNumber6519 > > CPU Inel T2130 > > 00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0671 > 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media > IO] (rev 01) > 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) > 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller > (rev 0f) > 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller > (rev 0f) > 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller > 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / > IDE mode (rev 03) > 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio > Controller 01:00.0 VGA compatible controller: ATI Technologies Inc Unknown > device 718a 02:00.0 Ethernet controller: Atheros Communications, Inc. > Unknown device 001c (rev 01) > > Linux version 2.6.18-std-smp-alt6 (builder@hint1.office.altlinux.org) (gcc > version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Sun Apr 29 > 00:41:18 MSD 2007 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) > BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) > BIOS-e820: 000000003ffbe000 - 0000000040000000 (ACPI NVS) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) > 127MB HIGHMEM available. > 896MB LOWMEM available. > On node 0 totalpages: 262064 > DMA zone: 4096 pages, LIFO batch:0 > Normal zone: 225280 pages, LIFO batch:31 > HighMem zone: 32688 pages, LIFO batch:7 > DMI present. > ACPI: RSDP (v000 ACPIAM ) @ 0x000f8db0 > ACPI: RSDT (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0000 > ACPI: FADT (v002 040207 FACP0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0200 > ACPI: MADT (v001 040207 APIC0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0390 > ACPI: MCFG (v001 040207 OEMMCFG 0x20070402 MSFT 0x00000097) @ 0x3ffb03f0 > ACPI: SLIC (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0430 > ACPI: WDRT (v001 040207 OEMWDRT 0x20070402 MSFT 0x00000097) @ 0x3ffb05b0 > ACPI: BOOT (v001 040207 BOOT0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0600 > ACPI: OEMB (v001 040207 OEMB0939 0x20070402 MSFT 0x00000097) @ 0x3ffbe040 > ACPI: DSDT (v001 A0714 A0714002 0x00000002 INTL 0x20051117) @ 0x00000000 > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 6:14 APIC version 20 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 6:14 APIC version 20 > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000) > Detected 1866.276 MHz processor. > Built 1 zonelists. Total pages: 262064 > Kernel command line: BOOT_IMAGE=alt0/vmlinuz vga=0x314 lang=ru > automatic=method:cdrom initrd=alt0/full.cz live fastboot stagename=live > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Console: colour dummy device 80x25 > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 1031660k/1048256k available (1585k kernel code, 15944k reserved, > 640k data, 192k init, 130752k highmem) > Checking if this processor honours the WP bit even in supervisor mode... > Ok. Calibrating delay using timer specific routine.. 3734.39 BogoMIPS > (lpj=7468787) > Security Framework v1.0.0 initialized > Capability LSM initialized > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c189 00000000 00000000 > CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c189 00000000 00000000 > monitor/mwait feature present. > using mwait in idle threads. > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c189 > 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Compat vDSO mapped to ffffe000. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > checking if image is initramfs... it is > Freeing initrd memory: 3753k freed > ACPI: Core revision 20060707 > ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist. > CPU0: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c > SMP alternatives: switching to SMP code > Booting processor 1/1 eip 3000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3732.57 BogoMIPS > (lpj=7465147) > CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c189 00000000 00000000 > CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c189 00000000 00000000 > monitor/mwait feature present. > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c189 > 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#1. > CPU1: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c > Total of 2 processors activated (7466.96 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > ..MP-BIOS bug: 8254 timer not connected to IO-APIC > ...trying to set up timer (IRQ0) through the 8259A ... failed. > ...trying to set up timer as Virtual Wire IRQ... works. > checking TSC synchronization across 2 CPUs: passed. > Brought up 2 CPUs > migration_cost=434 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved > PCI: Not using MMCONFIG. > PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 > PCI: Using configuration type 1 > Setting up standard PCI resources > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:01:00.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode. > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 11 devices > PnPBIOS: Disabled by ACPI PNP > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > report PCI: Bridge: 0000:00:01.0 > IO window: a000-afff > MEM window: fa900000-fa9fffff > PREFETCH window: aff00000-bfefffff > PCI: Bridge: 0000:00:06.0 > IO window: disabled. > MEM window: faa00000-faafffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:07.0 > IO window: b000-cfff > MEM window: fab00000-feafffff > PREFETCH window: bff00000-dfefffff > PCI: Setting latency timer of device 0000:00:01.0 to 64 > PCI: Setting latency timer of device 0000:00:06.0 to 64 > PCI: Setting latency timer of device 0000:00:07.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > Simple Boot Flag value 0xc0 read from CMOS RAM was invalid > Simple Boot Flag at 0xff set to 0x1 > audit: initializing netlink socket (disabled) > audit(1185912994.772:1): initialized > highmem bounce pool size: 64 pages > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:01.0:pcie00] > PCI: Setting latency timer of device 0000:00:06.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:06.0:pcie00] > PCI: Setting latency timer of device 0000:00:07.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:07.0:pcie00] > Allocate Port Service[0000:00:07.0:pcie02] > vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 3750k, total > 16384k > vesafb: mode is 800x600x16, linelength=1600, pages=16 > vesafb: protected mode interface info at c000:aac2 > vesafb: pmi: set display start = c00cab4a, set palette = c00cac06 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size > 150058 bytes,<6>...found (800x600, 27802 bytes, v3). > Console: switching to colour frame buffer device 97x34 > fb0: VESA VGA frame buffer device > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 > i8042.c: Detected active multiplexing controller, rev 1.1. > serio: i8042 AUX0 port at 0x60,0x64 irq 12 > serio: i8042 AUX1 port at 0x60,0x64 irq 12 > serio: i8042 AUX2 port at 0x60,0x64 irq 12 > serio: i8042 AUX3 port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > mice: PS/2 mouse device common for all mice > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: bitmap version 4.39 > TCP bic registered > NET: Registered protocol family 1 > Using IPI No-Shortcut mode > ACPI: (supports S0 S1 S3 S4 S5) > Time: tsc clocksource has been installed. > Freeing unused kernel memory: 192k freed > Executing init=/init > input: AT Translated Set 2 keyboard as /class/input/input0 > usbcore: registered new driver usbfs > usbcore: registered new driver hub > ACPI: PCI Interrupt 0000:00:03.3[C] -> GSI 22 (level, low) -> IRQ 201 > ehci_hcd 0000:00:03.3: EHCI Host Controller > ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:03.3: irq 201, io mem 0xfebfd000 > ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > usb 1-8: new high speed USB device using ehci_hcd and address 3 > usb 1-8: configuration #1 chosen from 1 choice > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) > ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 209 > ohci_hcd 0000:00:03.0: OHCI Host Controller > ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:03.0: irq 209, io mem 0xfebff000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 4 ports detected > ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 217 > ohci_hcd 0000:00:03.1: OHCI Host Controller > ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 > ohci_hcd 0000:00:03.1: irq 217, io mem 0xfebfe000 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 4 ports detected > usb 3-2: new low speed USB device using ohci_hcd and address 2 > usb 3-2: configuration #1 chosen from 1 choice > usbcore: registered new driver hiddev > input: Logitech Logitech USB Optical Mouse as /class/input/input1 > input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on > usb-0000:00:03.1-2 > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > SCSI subsystem initialized > SIS5513: IDE controller at PCI slot 0000:00:02.5 > SIS5513: chipset revision 1 > SIS5513: not 100% native mode: will probe irqs later > SIS5513: SiS968 ATA 133 (2nd gen) controller > ide0: BM-DMA at 0xffe0-0xffe7, BIOS settings: hda:DMA, hdb:DMA > Probing IDE interface ide0... > hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > Probing IDE interface ide1... > usbcore: registered new driver libusual > Initializing USB Mass Storage driver... > scsi0 : SCSI emulation for USB Mass Storage devices > usbcore: registered new driver usb-storage > USB Mass Storage support registered. > usb-storage: device found at 3 > usb-storage: waiting for device to settle before scanning > Vendor: Generic- Model: xD/SDMMC/MS/Pro Rev: 1.00 > Type: Direct-Access ANSI SCSI revision: 00 > usb-storage: device scan complete > ISO 9660 Extensions: Microsoft Joliet Level 3 > ISO 9660 Extensions: RRIP_1991A > loop: loaded (max 8 devices) > squashfs: version 3.2 (2007/01/02) Phillip Lougher > Real Time Clock Driver v1.12ac > input: PC Speaker as /class/input/input2 > sd 0:0:0:0: Attached scsi removable disk sda > sd 0:0:0:0: Attached scsi generic sg0 type 0 > ts: Compaq touchscreen protocol output > Linux agpgart interface v0.101 (c) Dave Jones > ath_hal: module license 'Proprietary' taints kernel. > ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) > 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible > chip > 8139cp 0000:00:0d.0: Try the "8139too" driver instead. > wlan: 0.8.4.2 (0.9.3.1) > 8139too Fast Ethernet driver 0.9.27 > ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 225 > eth0: RealTek RTL8139 at 0xf8822c00, 00:1b:fc:48:37:09, IRQ 225 > eth0: Identified 8139 chip type 'RTL-8100B/8139D' > ath_pci: 0.9.4.5 (0.9.3.1) > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 233 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > ath_rate_sample: 1.2 (0.9.3.1) > wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps > 24Mbps 36Mbps 48Mbps 54Mbps > wifi0: H/W encryption support: WEP AES AES_CCM TKIP > wifi0: mac 10.0 phy 6.1 radio 10.2 > wifi0: Use hw queue 1 for WME_AC_BE traffic > wifi0: Use hw queue 0 for WME_AC_BK traffic > wifi0: Use hw queue 2 for WME_AC_VI traffic > wifi0: Use hw queue 3 for WME_AC_VO traffic > wifi0: Use hw queue 8 for CAB traffic > wifi0: Use hw queue 9 for beacons > Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 > wifi0: Atheros 5424/2424: mem=0xfaaf0000, irq=233 > ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:0f.0 to 64 > input: SynPS/2 Synaptics TouchPad as /class/input/input3 > hda_codec: Unknown model for ALC861, trying auto-probe from BIOS... > Registering unionfs 1.4 > unionfs: debugging is not enabled > device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: > dm-devel@redhat.com > [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes. > [fglrx] module loaded - fglrx 8.36.5 [Apr 17 2007] on minor 0 > ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 233 > [fglrx] total GART = 130023424 > [fglrx] free GART = 114032640 > [fglrx] max single GART = 114032640 > [fglrx] total LFB = 66977792 > [fglrx] free LFB = 52588544 > [fglrx] max single LFB = 52588544 > [fglrx] total Inv = 0 > [fglrx] free Inv = 0 > [fglrx] max single Inv = 0 > [fglrx] total TIM = 0 > ACPI: AC Adapter [AC0] (on-line) > QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice > Bellard KQEMU installed, max_locked_mem=517936kB. > bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size > 150058 bytes,<6>...found (800x600, 27802 bytes, v3). > bootsplash: status on console 1 changed to on > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > usb 1-1: new high speed USB device using ehci_hcd and address 4 > usb 1-1: configuration #1 chosen from 1 choice > scsi1 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 4 > usb-storage: waiting for device to settle before scanning > Vendor: USB Model: FLASH DISK Rev: 2.00 > Type: Direct-Access ANSI SCSI revision: 02 > ready > SCSI device sdb: 256000 512-byte hdwr sectors (131 MB) > sdb: Write Protect is off > sdb: Mode Sense: 03 00 00 00 > sdb: assuming drive cache: write through > SCSI device sdb: 256000 512-byte hdwr sectors (131 MB) > sdb: Write Protect is off > sdb: Mode Sense: 03 00 00 00 > sdb: assuming drive cache: write through > sdb: sdb1 sdb2 > sd 1:0:0:0: Attached scsi removable disk sdb > sd 1:0:0:0: Attached scsi generic sg1 type 0 > usb-storage: device scan complete > EXT2-fs warning: mounting fs with errors, running e2fsck is recommended > EXT2-fs error (device sdb2): ext2_check_page: bad entry in directory #2: > unaligned directory entry - offset=0, inode=4294967295, rec_len=65535, > name_len=255 > EXT2-fs error (device sdb2): ext2_readdir: bad page in #2 > Я так понимаю, что диски и разделы видны. но почему-то : Не альтом! Это вывод, сделанный из-под Мандривы. > >SIS5513: not 100% native mode: will probe irqs later > >SIS5513: SiS968 ATA 133 (2nd gen) controller Хихин Руслан: >А интересно посмотреть dmesg под Альтом, хотя "ядерщикам" и так всё >прозрачно. >Я-бы повесил багу с dmesg и lsmod под Alt и под Мандривой. Лепихов: >ясно. попробую добавить поддержку этого недо-sata контроллера в наше ядро. -- Салют, /GLeb UIN: 15341920 jabber://gleb@asd.iao.ru sip://2387245@sipnet.ru (telephony) skype://gleb_kulikov.tomsk (telephony) sip://20000204@sip.pctel.ru (telephony) netmail: 2:5005/78 ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] desktop/server 4 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-07-31 13:01 ` Gleb Kulikov ` (2 preceding siblings ...) 2008-04-22 3:54 ` [sisyphus] desktop/server 4 " Gleb Kulikov @ 2008-04-22 11:19 ` Gleb Kulikov 3 siblings, 0 replies; 22+ messages in thread From: Gleb Kulikov @ 2008-04-22 11:19 UTC (permalink / raw) To: sisyphus, ALT Linux Community general discussions, hardware В сообщении от Вторник 31 июля 2007 Gleb Kulikov написал: Коллеги, я так понимаю, ничего не изменилось? Ни 4.0.1, ни 4.0.2, ни 4.0.3 -- жёсткого диска "не видят". Мандрива (ещё 2007) -- работает без проблем. > В сообщении от Вторник 31 июля 2007 Шишков Евгений написал: > > Gleb Kulikov пишет: > > > Джентельмены, > > > > > > я правильно понимаю, что ни 4, ни тем более, 3, инсталлировать на ноут > > > ASUS X50VSeries, не получится? > > > > > > жёсткий диск отображается (меню биос - настройки жёсткого диска) на 3 > > > мастер, на 1-ом мастере, DVD. > > > > > > инталлятор, жёсткого диска не видит. > > > Нет доступа к жёсткому диску, и при загрузке в лайв-сиди. > > > > Ну Вы распишите немного про него. > > Точная модель (а не Series)? > > Что за чипсет? > > Популярнейшие машинки бюджетной серии. Собственно, у нас на работе мужик > принёс, и опс... пролёт. > > Кстати, звук не работает тоже (нет микшера, хотя модули альзы встают), > набортная видеокамера, также себя никак не проявляет. > > модель X50V > MB Ver. : F5V ID:2C > 76N0AS066825 > CheckNumber6519 > > CPU Inel T2130 > > 00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0671 > 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media > IO] (rev 01) > 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) > 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller > (rev 0f) > 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller > (rev 0f) > 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller > 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / > IDE mode (rev 03) > 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio > Controller 01:00.0 VGA compatible controller: ATI Technologies Inc Unknown > device 718a 02:00.0 Ethernet controller: Atheros Communications, Inc. > Unknown device 001c (rev 01) > > Linux version 2.6.18-std-smp-alt6 (builder@hint1.office.altlinux.org) (gcc > version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Sun Apr 29 > 00:41:18 MSD 2007 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) > BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) > BIOS-e820: 000000003ffbe000 - 0000000040000000 (ACPI NVS) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) > 127MB HIGHMEM available. > 896MB LOWMEM available. > On node 0 totalpages: 262064 > DMA zone: 4096 pages, LIFO batch:0 > Normal zone: 225280 pages, LIFO batch:31 > HighMem zone: 32688 pages, LIFO batch:7 > DMI present. > ACPI: RSDP (v000 ACPIAM ) @ 0x000f8db0 > ACPI: RSDT (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0000 > ACPI: FADT (v002 040207 FACP0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0200 > ACPI: MADT (v001 040207 APIC0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0390 > ACPI: MCFG (v001 040207 OEMMCFG 0x20070402 MSFT 0x00000097) @ 0x3ffb03f0 > ACPI: SLIC (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0430 > ACPI: WDRT (v001 040207 OEMWDRT 0x20070402 MSFT 0x00000097) @ 0x3ffb05b0 > ACPI: BOOT (v001 040207 BOOT0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0600 > ACPI: OEMB (v001 040207 OEMB0939 0x20070402 MSFT 0x00000097) @ 0x3ffbe040 > ACPI: DSDT (v001 A0714 A0714002 0x00000002 INTL 0x20051117) @ 0x00000000 > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 6:14 APIC version 20 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 6:14 APIC version 20 > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000) > Detected 1866.276 MHz processor. > Built 1 zonelists. Total pages: 262064 > Kernel command line: BOOT_IMAGE=alt0/vmlinuz vga=0x314 lang=ru > automatic=method:cdrom initrd=alt0/full.cz live fastboot stagename=live > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Console: colour dummy device 80x25 > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 1031660k/1048256k available (1585k kernel code, 15944k reserved, > 640k data, 192k init, 130752k highmem) > Checking if this processor honours the WP bit even in supervisor mode... > Ok. Calibrating delay using timer specific routine.. 3734.39 BogoMIPS > (lpj=7468787) > Security Framework v1.0.0 initialized > Capability LSM initialized > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c189 00000000 00000000 > CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c189 00000000 00000000 > monitor/mwait feature present. > using mwait in idle threads. > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c189 > 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Compat vDSO mapped to ffffe000. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > checking if image is initramfs... it is > Freeing initrd memory: 3753k freed > ACPI: Core revision 20060707 > ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist. > CPU0: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c > SMP alternatives: switching to SMP code > Booting processor 1/1 eip 3000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3732.57 BogoMIPS > (lpj=7465147) > CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c189 00000000 00000000 > CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c189 00000000 00000000 > monitor/mwait feature present. > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c189 > 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#1. > CPU1: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c > Total of 2 processors activated (7466.96 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > ..MP-BIOS bug: 8254 timer not connected to IO-APIC > ...trying to set up timer (IRQ0) through the 8259A ... failed. > ...trying to set up timer as Virtual Wire IRQ... works. > checking TSC synchronization across 2 CPUs: passed. > Brought up 2 CPUs > migration_cost=434 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved > PCI: Not using MMCONFIG. > PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 > PCI: Using configuration type 1 > Setting up standard PCI resources > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:01:00.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode. > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 11 devices > PnPBIOS: Disabled by ACPI PNP > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > report PCI: Bridge: 0000:00:01.0 > IO window: a000-afff > MEM window: fa900000-fa9fffff > PREFETCH window: aff00000-bfefffff > PCI: Bridge: 0000:00:06.0 > IO window: disabled. > MEM window: faa00000-faafffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:07.0 > IO window: b000-cfff > MEM window: fab00000-feafffff > PREFETCH window: bff00000-dfefffff > PCI: Setting latency timer of device 0000:00:01.0 to 64 > PCI: Setting latency timer of device 0000:00:06.0 to 64 > PCI: Setting latency timer of device 0000:00:07.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > Simple Boot Flag value 0xc0 read from CMOS RAM was invalid > Simple Boot Flag at 0xff set to 0x1 > audit: initializing netlink socket (disabled) > audit(1185912994.772:1): initialized > highmem bounce pool size: 64 pages > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:01.0:pcie00] > PCI: Setting latency timer of device 0000:00:06.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:06.0:pcie00] > PCI: Setting latency timer of device 0000:00:07.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:07.0:pcie00] > Allocate Port Service[0000:00:07.0:pcie02] > vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 3750k, total > 16384k > vesafb: mode is 800x600x16, linelength=1600, pages=16 > vesafb: protected mode interface info at c000:aac2 > vesafb: pmi: set display start = c00cab4a, set palette = c00cac06 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size > 150058 bytes,<6>...found (800x600, 27802 bytes, v3). > Console: switching to colour frame buffer device 97x34 > fb0: VESA VGA frame buffer device > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 > i8042.c: Detected active multiplexing controller, rev 1.1. > serio: i8042 AUX0 port at 0x60,0x64 irq 12 > serio: i8042 AUX1 port at 0x60,0x64 irq 12 > serio: i8042 AUX2 port at 0x60,0x64 irq 12 > serio: i8042 AUX3 port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > mice: PS/2 mouse device common for all mice > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: bitmap version 4.39 > TCP bic registered > NET: Registered protocol family 1 > Using IPI No-Shortcut mode > ACPI: (supports S0 S1 S3 S4 S5) > Time: tsc clocksource has been installed. > Freeing unused kernel memory: 192k freed > Executing init=/init > input: AT Translated Set 2 keyboard as /class/input/input0 > usbcore: registered new driver usbfs > usbcore: registered new driver hub > ACPI: PCI Interrupt 0000:00:03.3[C] -> GSI 22 (level, low) -> IRQ 201 > ehci_hcd 0000:00:03.3: EHCI Host Controller > ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:03.3: irq 201, io mem 0xfebfd000 > ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > usb 1-8: new high speed USB device using ehci_hcd and address 3 > usb 1-8: configuration #1 chosen from 1 choice > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) > ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 209 > ohci_hcd 0000:00:03.0: OHCI Host Controller > ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:03.0: irq 209, io mem 0xfebff000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 4 ports detected > ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 217 > ohci_hcd 0000:00:03.1: OHCI Host Controller > ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 > ohci_hcd 0000:00:03.1: irq 217, io mem 0xfebfe000 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 4 ports detected > usb 3-2: new low speed USB device using ohci_hcd and address 2 > usb 3-2: configuration #1 chosen from 1 choice > usbcore: registered new driver hiddev > input: Logitech Logitech USB Optical Mouse as /class/input/input1 > input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on > usb-0000:00:03.1-2 > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > SCSI subsystem initialized > SIS5513: IDE controller at PCI slot 0000:00:02.5 > SIS5513: chipset revision 1 > SIS5513: not 100% native mode: will probe irqs later > SIS5513: SiS968 ATA 133 (2nd gen) controller > ide0: BM-DMA at 0xffe0-0xffe7, BIOS settings: hda:DMA, hdb:DMA > Probing IDE interface ide0... > hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > Probing IDE interface ide1... > usbcore: registered new driver libusual > Initializing USB Mass Storage driver... > scsi0 : SCSI emulation for USB Mass Storage devices > usbcore: registered new driver usb-storage > USB Mass Storage support registered. > usb-storage: device found at 3 > usb-storage: waiting for device to settle before scanning > Vendor: Generic- Model: xD/SDMMC/MS/Pro Rev: 1.00 > Type: Direct-Access ANSI SCSI revision: 00 > usb-storage: device scan complete > ISO 9660 Extensions: Microsoft Joliet Level 3 > ISO 9660 Extensions: RRIP_1991A > loop: loaded (max 8 devices) > squashfs: version 3.2 (2007/01/02) Phillip Lougher > Real Time Clock Driver v1.12ac > input: PC Speaker as /class/input/input2 > sd 0:0:0:0: Attached scsi removable disk sda > sd 0:0:0:0: Attached scsi generic sg0 type 0 > ts: Compaq touchscreen protocol output > Linux agpgart interface v0.101 (c) Dave Jones > ath_hal: module license 'Proprietary' taints kernel. > ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) > 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible > chip > 8139cp 0000:00:0d.0: Try the "8139too" driver instead. > wlan: 0.8.4.2 (0.9.3.1) > 8139too Fast Ethernet driver 0.9.27 > ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 225 > eth0: RealTek RTL8139 at 0xf8822c00, 00:1b:fc:48:37:09, IRQ 225 > eth0: Identified 8139 chip type 'RTL-8100B/8139D' > ath_pci: 0.9.4.5 (0.9.3.1) > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 233 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > ath_rate_sample: 1.2 (0.9.3.1) > wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps > 24Mbps 36Mbps 48Mbps 54Mbps > wifi0: H/W encryption support: WEP AES AES_CCM TKIP > wifi0: mac 10.0 phy 6.1 radio 10.2 > wifi0: Use hw queue 1 for WME_AC_BE traffic > wifi0: Use hw queue 0 for WME_AC_BK traffic > wifi0: Use hw queue 2 for WME_AC_VI traffic > wifi0: Use hw queue 3 for WME_AC_VO traffic > wifi0: Use hw queue 8 for CAB traffic > wifi0: Use hw queue 9 for beacons > Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 > wifi0: Atheros 5424/2424: mem=0xfaaf0000, irq=233 > ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:0f.0 to 64 > input: SynPS/2 Synaptics TouchPad as /class/input/input3 > hda_codec: Unknown model for ALC861, trying auto-probe from BIOS... > Registering unionfs 1.4 > unionfs: debugging is not enabled > device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: > dm-devel@redhat.com > [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes. > [fglrx] module loaded - fglrx 8.36.5 [Apr 17 2007] on minor 0 > ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 233 > [fglrx] total GART = 130023424 > [fglrx] free GART = 114032640 > [fglrx] max single GART = 114032640 > [fglrx] total LFB = 66977792 > [fglrx] free LFB = 52588544 > [fglrx] max single LFB = 52588544 > [fglrx] total Inv = 0 > [fglrx] free Inv = 0 > [fglrx] max single Inv = 0 > [fglrx] total TIM = 0 > ACPI: AC Adapter [AC0] (on-line) > QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice > Bellard KQEMU installed, max_locked_mem=517936kB. > bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size > 150058 bytes,<6>...found (800x600, 27802 bytes, v3). > bootsplash: status on console 1 changed to on > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > hda_codec: num_steps = 0 for NID=0x8 > usb 1-1: new high speed USB device using ehci_hcd and address 4 > usb 1-1: configuration #1 chosen from 1 choice > scsi1 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 4 > usb-storage: waiting for device to settle before scanning > Vendor: USB Model: FLASH DISK Rev: 2.00 > Type: Direct-Access ANSI SCSI revision: 02 > ready > SCSI device sdb: 256000 512-byte hdwr sectors (131 MB) > sdb: Write Protect is off > sdb: Mode Sense: 03 00 00 00 > sdb: assuming drive cache: write through > SCSI device sdb: 256000 512-byte hdwr sectors (131 MB) > sdb: Write Protect is off > sdb: Mode Sense: 03 00 00 00 > sdb: assuming drive cache: write through > sdb: sdb1 sdb2 > sd 1:0:0:0: Attached scsi removable disk sdb > sd 1:0:0:0: Attached scsi generic sg1 type 0 > usb-storage: device scan complete > EXT2-fs warning: mounting fs with errors, running e2fsck is recommended > EXT2-fs error (device sdb2): ext2_check_page: bad entry in directory #2: > unaligned directory entry - offset=0, inode=4294967295, rec_len=65535, > name_len=255 > EXT2-fs error (device sdb2): ext2_readdir: bad page in #2 > Я так понимаю, что диски и разделы видны. но почему-то : Не альтом! Это вывод, сделанный из-под Мандривы. > >SIS5513: not 100% native mode: will probe irqs later > >SIS5513: SiS968 ATA 133 (2nd gen) controller Хихин Руслан: >А интересно посмотреть dmesg под Альтом, хотя "ядерщикам" и так всё >прозрачно. >Я-бы повесил багу с dmesg и lsmod под Alt и под Мандривой. Лепихов: >ясно. попробую добавить поддержку этого недо-sata контроллера в наше ядро. -- Салют, /GLeb UIN: 15341920 jabber://gleb@asd.iao.ru sip://2387245@sipnet.ru (telephony) skype://gleb_kulikov.tomsk (telephony) sip://20000204@sip.pctel.ru (telephony) netmail: 2:5005/78 ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] [Comm] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-07-31 8:35 [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( Gleb Kulikov 2007-07-31 8:46 ` Шишков Евгений @ 2007-08-01 6:50 ` Aleksey Novodvorsky 2007-08-01 8:05 ` Aleksey Novodvorsky 2 siblings, 0 replies; 22+ messages in thread From: Aleksey Novodvorsky @ 2007-08-01 6:50 UTC (permalink / raw) To: ALT Linux Community; +Cc: sisyphus Пожалуйста, повесьте багу. Rgrds, Алексей On 7/31/07, Gleb Kulikov <glebus@asd.iao.ru> wrote: > Джентельмены, > > я правильно понимаю, что ни 4, ни тем более, 3, инсталлировать на ноут ASUS > X50VSeries, не получится? > > жёсткий диск отображается (меню биос - настройки жёсткого диска) на 3 мастер, > на 1-ом мастере, DVD. > > инталлятор, жёсткого диска не видит. > Нет доступа к жёсткому диску, и при загрузке в лайв-сиди. > > -- > Салют, /GLeb > > UIN: 15341920 > jabber://gleb@asd.iao.ru > sip://2387245@sipnet.ru (telephony) > skype://gleb_kulikov.tomsk (telephony) > sip://20000204@sip.pctel.ru (telephony) > netmail: 2:5005/78 > _______________________________________________ > Community mailing list > Community@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/community ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] [Comm] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-07-31 8:35 [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( Gleb Kulikov 2007-07-31 8:46 ` Шишков Евгений 2007-08-01 6:50 ` [sisyphus] [Comm] desktop/server 4 OR compact3 " Aleksey Novodvorsky @ 2007-08-01 8:05 ` Aleksey Novodvorsky 2007-08-01 8:43 ` Gleb Kulikov 2 siblings, 1 reply; 22+ messages in thread From: Aleksey Novodvorsky @ 2007-08-01 8:05 UTC (permalink / raw) To: ALT Linux Community; +Cc: sisyphus On 7/31/07, Gleb Kulikov <glebus@asd.iao.ru> wrote: > Джентельмены, > > я правильно понимаю, что ни 4, ни тем более, 3, инсталлировать на ноут ASUS > X50VSeries, не получится? Если он у кого-то есть в msk и можно занести в наш офис, -- сообщите, пощупаем. Rgrds, Алексей ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] [Comm] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-01 8:05 ` Aleksey Novodvorsky @ 2007-08-01 8:43 ` Gleb Kulikov 2007-08-01 8:58 ` Aleksey Novodvorsky 0 siblings, 1 reply; 22+ messages in thread From: Gleb Kulikov @ 2007-08-01 8:43 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list В сообщении от Среда 01 августа 2007 Aleksey Novodvorsky написал: > Если он у кого-то есть в msk и можно занести в наш офис, -- сообщите, > пощупаем. я в Томске -- Салют, /GLeb UIN: 15341920 jabber://gleb@asd.iao.ru sip://2387245@sipnet.ru (telephony) skype://gleb_kulikov.tomsk (telephony) sip://20000204@sip.pctel.ru (telephony) netmail: 2:5005/78 ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] [Comm] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-01 8:43 ` Gleb Kulikov @ 2007-08-01 8:58 ` Aleksey Novodvorsky 2007-08-01 14:44 ` Gleb Kulikov 0 siblings, 1 reply; 22+ messages in thread From: Aleksey Novodvorsky @ 2007-08-01 8:58 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list On 8/1/07, Gleb Kulikov <glebus@asd.iao.ru> wrote: > В сообщении от Среда 01 августа 2007 Aleksey Novodvorsky написал: > > > Если он у кого-то есть в msk и можно занести в наш офис, -- сообщите, > > пощупаем. > > я в Томске я знаю. Rgrds, Алексей ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] [Comm] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-01 8:58 ` Aleksey Novodvorsky @ 2007-08-01 14:44 ` Gleb Kulikov 2007-08-01 21:02 ` Aleksey Novodvorsky 0 siblings, 1 reply; 22+ messages in thread From: Gleb Kulikov @ 2007-08-01 14:44 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list В сообщении от Среда 01 августа 2007 Aleksey Novodvorsky написал: > On 8/1/07, Gleb Kulikov <glebus@asd.iao.ru> wrote: > > В сообщении от Среда 01 августа 2007 Aleksey Novodvorsky написал: > > > Если он у кого-то есть в msk и можно занести в наш офис, -- сообщите, > > > пощупаем. Диски увидела Мандрива 2007 (что не помешало ей зависнуть на подгрузке HAL/ALSы. пришлось закомментировать загрузку/выгрузку модулей в modules. uname -a: Linux localhost 2.6.17-5mdv #1 SMP Wed Sep 13 14:32:31 EDT 2006 i686 Genuine Intel(R) CPU T2130 @ 1.86GHz GNU/Linux +++++++++++++++++++ lsmod: Module Size Used by nls_iso8859_1 4800 1 nls_cp437 6464 1 vfat 11104 1 fat 46876 1 vfat nfsd 216248 17 ipv6 237120 16 exportfs 5536 1 nfsd lockd 56360 2 nfsd nfs_acl 3776 1 nfsd sunrpc 137532 12 nfsd,lockd,nfs_acl 8139too 22880 0 mii 5664 1 8139too af_packet 17960 0 video 13924 0 thermal 11240 0 fan 4036 0 container 3968 0 button 5808 0 battery 8260 0 ac 4292 0 ide_cd 35776 0 binfmt_misc 9800 1 loop 15400 0 nls_utf8 2624 1 ntfs 266940 1 xfs 573880 2 sg 30776 0 dm_mod 49944 0 cpufreq_ondemand 6956 0 cpufreq_conservative 6952 0 cpufreq_powersave 2400 0 freq_table 4800 0 processor 21448 1 thermal asus_acpi 10324 0 nvram 8104 0 usbmouse 5280 0 usbhid 49024 0 usb_storage 88452 2 ehci_hcd 29160 0 ohci_hcd 19012 0 usbcore 113472 6 usbmouse,usbhid,usb_storage,ehci_hcd,ohci_hcd tsdev 7040 0 evdev 8864 1 joydev 8928 0 ext3 124936 1 jbd 51028 1 ext3 sd_mod 18368 9 sata_sis 6852 5 libata 60620 1 sata_sis scsi_mod 118376 4 sg,usb_storage,sd_mod,libata ++++++++++++++++++++++++++ modules: # /etc/modules: kernel modules to load at boot time. # # This file should contain the names of kernel modules that are # to be loaded at boot time, one per line. Comments begin with # a `#', and everything on the line after them are ignored. nvram evdev asus_acpi ++++++++++++++++++++++++++++++++ modprobe.preload: # /etc/modprobe.preload: kernel modules to load at boot time. # # This file should contain the names of kernel modules that are # to be loaded at boot time, one per line. Comments begin with # a `#', and everything on the line after them are ignored. # this file is for module-init-tools (kernel 2.5 and above) ONLY # for old kernel use /etc/modules nvram evdev asus_acpi +++++++++++++++++++++++++++++++++++++++++++++ lspci: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0671 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] Unknown device 0968 (rev 01) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:05.0 IDE interface: Silicon Integrated Systems [SiS] Unknown device 1183 (rev 03) 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Unknown device 7502 01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 718a 02:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c (rev 01) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ dmesg: Linux version 2.6.17-5mdv (rtp@octopus.mandriva.com) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-3mdk)) #1 SMP Wed Sep 13 14:32:31 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) BIOS-e820: 000000003ffbe000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 895MB LOWMEM available. On node 0 totalpages: 262064 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225279 pages, LIFO batch:31 HighMem zone: 32689 pages, LIFO batch:7 DMI present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f8db0 ACPI: RSDT (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0000 ACPI: FADT (v002 040207 FACP0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0200 ACPI: MADT (v001 040207 APIC0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0390 ACPI: MCFG (v001 040207 OEMMCFG 0x20070402 MSFT 0x00000097) @ 0x3ffb03f0 ACPI: SLIC (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0430 ACPI: WDRT (v001 040207 OEMWDRT 0x20070402 MSFT 0x00000097) @ 0x3ffb05b0 ACPI: BOOT (v001 040207 BOOT0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0600 ACPI: OEMB (v001 040207 OEMB0939 0x20070402 MSFT 0x00000097) @ 0x3ffbe040 ACPI: DSDT (v001 A0714 A0714002 0x00000002 INTL 0x20051117) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=linux root=805 splash=silent bootsplash: silent mode. mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1866.405 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1033376k/1048256k available (2426k kernel code, 13592k reserved, 756k data, 244k init, 130756k highmem, 0k BadRAM) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3761.84 BogoMIPS (lpj=7523692) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code checking if image is initramfs... it is Freeing initrd memory: 640k freed ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. CPU0: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3732.58 BogoMIPS (lpj=7465176) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c Total of 2 processors activated (7494.43 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=8000 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices PnPBIOS: Disabled PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: a000-afff MEM window: fa900000-fa9fffff PREFETCH window: aff00000-bfefffff PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: faa00000-faafffff PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: b000-cfff MEM window: fab00000-feafffff PREFETCH window: bff00000-dfefffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag value 0xc0 read from CMOS RAM was invalid Simple Boot Flag at 0xff set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1186006968.576:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:01.0 to 64 pcie_portdrv_probe->Dev[0004:1039] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:06.0 to 64 pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] PCI: Setting latency timer of device 0000:00:07.0 to 64 pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie02] vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 6144k, total 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at c000:aac2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 221104 bytes,<6>...found (1024x768, 221056 bytes, v3). Console: switching to colour frame buffer device 119x41 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 1 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS968 ATA 133 (2nd gen) controller ide0: BM-DMA at 0xffe0-0xffe7, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Starting balanced_irq Using IPI No-Shortcut mode ACPI wakeup devices: PCI0 USB USB2 HDA P0P6 P0P7 EUSB MAC S184 PWRB SLPB ACPI: (supports S0 S1 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 244k freed SCSI subsystem initialized libata version 1.20 loaded. sata_sis 0000:00:05.0: version 0.5-rtp ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 sata_sis 0000:00:05.0: Detected SiS182/1182/1183 chipset ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 16 ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 16 input: AT Translated Set 2 keyboard as /class/input/input0 ata1: SATA link up <unknown> Gbps (SStatus 3) ata1: dev 0 cfg 49:0f00 82:746b 83:7f69 84:6163 85:7469 86:3c49 87:6163 88:003f ata1: dev 0 ATA-7, max UDMA/100, 234441648 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sis ata2: SATA link down (SStatus 0) scsi1 : sata_sis Vendor: ATA Model: Hitachi HTS54161 Rev: SBDO Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda:<6>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 input: SynPS/2 Synaptics TouchPad as /class/input/input1 sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: Attached scsi disk sda kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ts: Compaq touchscreen protocol output usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 17, io mem 0xfebff000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.1: irq 18, io mem 0xfebfe000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:03.3[C] -> GSI 22 (level, low) -> IRQ 19 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:03.3: irq 19, io mem 0xfebfd000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 8 ports detected usb 3-8: new high speed USB device using ehci_hcd and address 3 usb 3-8: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... usb 2-2: new low speed USB device using ohci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new driver hiddev input: Logitech Logitech USB Optical Mouse as /class/input/input2 input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:03.1-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver Non-volatile memory driver v1.2 Asus Laptop ACPI Extras version 0.29 no string returned by INIT trying default values, supply the developers with your DSDT ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU2] (supports 8 throttling states) ACPI Error (exoparg2-0397): Index value (0FFFFFFFB) beyond package end (A) [20060127] ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU1._PSS] (Node f797b1e0), AE_AML_PACKAGE_LIMIT ACPI Error (exoparg2-0397): Index value (0FFFFFFFB) beyond package end (A) [20060127] ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU2._PSS] (Node f797bbc0), AE_AML_PACKAGE_LIMIT device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com EXT3 FS on sda5, internal journal Vendor: Generic- Model: xD/SDMMC/MS/Pro Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:0: Attached scsi removable disk sdb usb-storage: device scan complete sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: Attached scsi generic sg1 type 0 Adding 524244k swap on /dev/sda8. Priority:-1 extents:1 across:524244k SGI XFS with ACLs, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sda7 Ending clean XFS mount for filesystem: sda7 NTFS driver 2.1.27 [Flags: R/O DEBUG MODULE]. NTFS volume version 3.1. XFS mounting filesystem sda6 Ending clean XFS mount for filesystem: sda6 loop: loaded (max 8 devices, max 1 partitions per device) hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 221104 bytes,<6>...found (1024x768, 221056 bytes, v3). bootsplash: status on console 0 changed to on ACPI: AC Adapter [AC0] (on-line) Netfilter messages via NETLINK v0.30. ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] Using specific hotkey driver ip_conntrack version 2.4 (8189 buckets, 65512 max) - 224 bytes per conntrack ACPI: Thermal Zone [THRM] (56 C) ACPI: Video Device [VGA_P0P1] (multi-head: yes rom: no post: no) Removing netfilter NETLINK layer. NET: Registered protocol family 17 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 16 eth0: RealTek RTL8139 at 0xf91b6c00, 00:1b:fc:48:37:09, IRQ 16 eth0: Identified 8139 chip type 'RTL-8100B/8139D' eth0: link down NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 19271 bytes, v3). bootsplash: status on console 0 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 19271 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 19271 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 19271 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 19271 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 19271 bytes, v3). bootsplash: status on console 5 changed to on usb 3-1: new high speed USB device using ehci_hcd and address 4 usb 3-1: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning Vendor: USB Model: FLASH DISK Rev: 2.00 Type: Direct-Access ANSI SCSI revision: 02 ready SCSI device sdc: 256000 512-byte hdwr sectors (131 MB) sdc: Write Protect is off sdc: Mode Sense: 03 00 00 00 sdc: assuming drive cache: write through SCSI device sdc: 256000 512-byte hdwr sectors (131 MB) sdc: Write Protect is off sdc: Mode Sense: 03 00 00 00 sdc: assuming drive cache: write through sdc: sdc1 sdc2 sd 3:0:0:0: Attached scsi removable disk sdc sd 3:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete EXT2-fs warning: mounting fs with errors, running e2fsck is recommended EXT2-fs error (device sdc2): ext2_check_page: bad entry in directory #2: unaligned directory entry - offset=0, inode=4294967295, rec_len=65535, name_len=255 EXT2-fs error (device sdc2): ext2_readdir: bad page in #2 EXT2-fs error (device sdc2): ext2_readdir: bad page in #2 -- Салют, /GLeb UIN: 15341920 jabber://gleb@asd.iao.ru sip://2387245@sipnet.ru (telephony) skype://gleb_kulikov.tomsk (telephony) sip://20000204@sip.pctel.ru (telephony) netmail: 2:5005/78 ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] [Comm] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-01 14:44 ` Gleb Kulikov @ 2007-08-01 21:02 ` Aleksey Novodvorsky 2007-08-02 6:45 ` Gleb Kulikov 2007-08-13 9:33 ` Gleb Kulikov 0 siblings, 2 replies; 22+ messages in thread From: Aleksey Novodvorsky @ 2007-08-01 21:02 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list Глеб, спасибо! Попробуем исправить. Rgrds, Алексей On 8/1/07, Gleb Kulikov <glebus@asd.iao.ru> wrote: > В сообщении от Среда 01 августа 2007 Aleksey Novodvorsky написал: > > On 8/1/07, Gleb Kulikov <glebus@asd.iao.ru> wrote: > > > В сообщении от Среда 01 августа 2007 Aleksey Novodvorsky написал: > > > > > Если он у кого-то есть в msk и можно занести в наш офис, -- сообщите, > > > > пощупаем. > > Диски увидела Мандрива 2007 (что не помешало ей зависнуть на подгрузке > HAL/ALSы. пришлось закомментировать загрузку/выгрузку модулей в modules. > > uname -a: > > Linux localhost 2.6.17-5mdv #1 SMP Wed Sep 13 14:32:31 EDT 2006 i686 Genuine > Intel(R) CPU T2130 @ 1.86GHz GNU/Linux > > +++++++++++++++++++ > > lsmod: > > Module Size Used by > nls_iso8859_1 4800 1 > nls_cp437 6464 1 > vfat 11104 1 > fat 46876 1 vfat > nfsd 216248 17 > ipv6 237120 16 > exportfs 5536 1 nfsd > lockd 56360 2 nfsd > nfs_acl 3776 1 nfsd > sunrpc 137532 12 nfsd,lockd,nfs_acl > 8139too 22880 0 > mii 5664 1 8139too > af_packet 17960 0 > video 13924 0 > thermal 11240 0 > fan 4036 0 > container 3968 0 > button 5808 0 > battery 8260 0 > ac 4292 0 > ide_cd 35776 0 > binfmt_misc 9800 1 > loop 15400 0 > nls_utf8 2624 1 > ntfs 266940 1 > xfs 573880 2 > sg 30776 0 > dm_mod 49944 0 > cpufreq_ondemand 6956 0 > cpufreq_conservative 6952 0 > cpufreq_powersave 2400 0 > freq_table 4800 0 > processor 21448 1 thermal > asus_acpi 10324 0 > nvram 8104 0 > usbmouse 5280 0 > usbhid 49024 0 > usb_storage 88452 2 > ehci_hcd 29160 0 > ohci_hcd 19012 0 > usbcore 113472 6 usbmouse,usbhid,usb_storage,ehci_hcd,ohci_hcd > tsdev 7040 0 > evdev 8864 1 > joydev 8928 0 > ext3 124936 1 > jbd 51028 1 ext3 > sd_mod 18368 9 > sata_sis 6852 5 > libata 60620 1 sata_sis > scsi_mod 118376 4 sg,usb_storage,sd_mod,libata > > ++++++++++++++++++++++++++ > > modules: > > # /etc/modules: kernel modules to load at boot time. > # > # This file should contain the names of kernel modules that are > # to be loaded at boot time, one per line. Comments begin with > # a `#', and everything on the line after them are ignored. > > nvram > evdev > asus_acpi > > ++++++++++++++++++++++++++++++++ > > modprobe.preload: > > # /etc/modprobe.preload: kernel modules to load at boot time. > # > # This file should contain the names of kernel modules that are > # to be loaded at boot time, one per line. Comments begin with > # a `#', and everything on the line after them are ignored. > # this file is for module-init-tools (kernel 2.5 and above) ONLY > # for old kernel use /etc/modules > > nvram > evdev > asus_acpi > > +++++++++++++++++++++++++++++++++++++++++++++ > lspci: > > 00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0671 > 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] Unknown device 0968 (rev > 01) > 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) > 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller > (rev 0f) > 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller > (rev 0f) > 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller > 00:05.0 IDE interface: Silicon Integrated Systems [SiS] Unknown device 1183 > (rev 03) > 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Unknown device 7502 > 01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 718a > 02:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c > (rev 01) > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > dmesg: > > Linux version 2.6.17-5mdv (rtp@octopus.mandriva.com) (gcc version 4.1.1 > 20060724 (prerelease) (4.1.1-3mdk)) #1 SMP Wed Sep 13 14:32:31 EDT 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) > BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) > BIOS-e820: 000000003ffbe000 - 0000000040000000 (ACPI NVS) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) > 127MB HIGHMEM available. > 895MB LOWMEM available. > On node 0 totalpages: 262064 > DMA zone: 4096 pages, LIFO batch:0 > Normal zone: 225279 pages, LIFO batch:31 > HighMem zone: 32689 pages, LIFO batch:7 > DMI present. > ACPI: RSDP (v000 ACPIAM ) @ 0x000f8db0 > ACPI: RSDT (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0000 > ACPI: FADT (v002 040207 FACP0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0200 > ACPI: MADT (v001 040207 APIC0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0390 > ACPI: MCFG (v001 040207 OEMMCFG 0x20070402 MSFT 0x00000097) @ 0x3ffb03f0 > ACPI: SLIC (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0430 > ACPI: WDRT (v001 040207 OEMWDRT 0x20070402 MSFT 0x00000097) @ 0x3ffb05b0 > ACPI: BOOT (v001 040207 BOOT0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0600 > ACPI: OEMB (v001 040207 OEMB0939 0x20070402 MSFT 0x00000097) @ 0x3ffbe040 > ACPI: DSDT (v001 A0714 A0714002 0x00000002 INTL 0x20051117) @ 0x00000000 > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 6:14 APIC version 20 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 6:14 APIC version 20 > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000) > Built 1 zonelists > Kernel command line: auto BOOT_IMAGE=linux root=805 splash=silent > bootsplash: silent mode. > mapped APIC to ffffe000 (fee00000) > mapped IOAPIC to ffffd000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Detected 1866.405 MHz processor. > Using pmtmr for high-res timesource > Console: colour dummy device 80x25 > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 1033376k/1048256k available (2426k kernel code, 13592k reserved, 756k > data, 244k init, 130756k highmem, 0k BadRAM) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay using timer specific routine.. 3761.84 BogoMIPS > (lpj=7523692) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c189 00000000 00000000 > CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 > 00000000 00000000 > monitor/mwait feature present. > using mwait in idle threads. > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c189 > 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > checking if image is initramfs... it is > Freeing initrd memory: 640k freed > ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. > CPU0: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c > SMP alternatives: switching to SMP code > Booting processor 1/1 eip 3000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3732.58 BogoMIPS > (lpj=7465176) > CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c189 00000000 00000000 > CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 > 00000000 00000000 > monitor/mwait feature present. > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c189 > 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#1. > CPU1: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c > Total of 2 processors activated (7494.43 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > ..MP-BIOS bug: 8254 timer not connected to IO-APIC > ...trying to set up timer (IRQ0) through the 8259A ... failed. > ...trying to set up timer as Virtual Wire IRQ... works. > checking TSC synchronization across 2 CPUs: passed. > Brought up 2 CPUs > migration_cost=8000 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved > PCI: Not using MMCONFIG. > PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 > Setting up standard PCI resources > ACPI: Subsystem revision 20060127 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:01:00.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode. > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 11 devices > PnPBIOS: Disabled > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > PCI: Bridge: 0000:00:01.0 > IO window: a000-afff > MEM window: fa900000-fa9fffff > PREFETCH window: aff00000-bfefffff > PCI: Bridge: 0000:00:06.0 > IO window: disabled. > MEM window: faa00000-faafffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:07.0 > IO window: b000-cfff > MEM window: fab00000-feafffff > PREFETCH window: bff00000-dfefffff > PCI: Setting latency timer of device 0000:00:01.0 to 64 > PCI: Setting latency timer of device 0000:00:06.0 to 64 > PCI: Setting latency timer of device 0000:00:07.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > Simple Boot Flag value 0xc0 read from CMOS RAM was invalid > Simple Boot Flag at 0xff set to 0x1 > apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) > apm: disabled - APM is not SMP safe. > audit: initializing netlink socket (disabled) > audit(1186006968.576:1): initialized > highmem bounce pool size: 64 pages > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > PCI: Setting latency timer of device 0000:00:01.0 to 64 > pcie_portdrv_probe->Dev[0004:1039] has invalid IRQ. Check vendor BIOS > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:01.0:pcie00] > PCI: Setting latency timer of device 0000:00:06.0 to 64 > pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:06.0:pcie00] > PCI: Setting latency timer of device 0000:00:07.0 to 64 > pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:07.0:pcie00] > Allocate Port Service[0000:00:07.0:pcie02] > vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 6144k, total > 16384k > vesafb: mode is 1024x768x16, linelength=2048, pages=9 > vesafb: protected mode interface info at c000:aac2 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 221104 > bytes,<6>...found (1024x768, 221056 bytes, v3). > Console: switching to colour frame buffer device 119x41 > fb0: VESA VGA frame buffer device > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Real Time Clock Driver v1.12ac > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > SIS5513: IDE controller at PCI slot 0000:00:02.5 > SIS5513: chipset revision 1 > SIS5513: not 100% native mode: will probe irqs later > SIS5513: SiS968 ATA 133 (2nd gen) controller > ide0: BM-DMA at 0xffe0-0xffe7, BIOS settings: hda:DMA, hdb:DMA > Probing IDE interface ide0... > hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 > i8042.c: Detected active multiplexing controller, rev 1.1. > serio: i8042 AUX0 port at 0x60,0x64 irq 12 > serio: i8042 AUX1 port at 0x60,0x64 irq 12 > serio: i8042 AUX2 port at 0x60,0x64 irq 12 > serio: i8042 AUX3 port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > mice: PS/2 mouse device common for all mice > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: bitmap version 4.39 > TCP bic registered > NET: Registered protocol family 1 > Starting balanced_irq > Using IPI No-Shortcut mode > ACPI wakeup devices: > PCI0 USB USB2 HDA P0P6 P0P7 EUSB MAC S184 PWRB SLPB > ACPI: (supports S0 S1 S3 S4 S5) > BIOS EDD facility v0.16 2004-Jun-25, 1 devices found > Freeing unused kernel memory: 244k freed > SCSI subsystem initialized > libata version 1.20 loaded. > sata_sis 0000:00:05.0: version 0.5-rtp > ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 > sata_sis 0000:00:05.0: Detected SiS182/1182/1183 chipset > ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 16 > ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 16 > input: AT Translated Set 2 keyboard as /class/input/input0 > ata1: SATA link up <unknown> Gbps (SStatus 3) > ata1: dev 0 cfg 49:0f00 82:746b 83:7f69 84:6163 85:7469 86:3c49 87:6163 > 88:003f > ata1: dev 0 ATA-7, max UDMA/100, 234441648 sectors: LBA48 > ata1: dev 0 configured for UDMA/100 > scsi0 : sata_sis > ata2: SATA link down (SStatus 0) > scsi1 : sata_sis > Vendor: ATA Model: Hitachi HTS54161 Rev: SBDO > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > sda:<6>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: > 0xa04713/0x10008 > input: SynPS/2 Synaptics TouchPad as /class/input/input1 > sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > > sd 0:0:0:0: Attached scsi disk sda > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > ts: Compaq touchscreen protocol output > usbcore: registered new driver usbfs > usbcore: registered new driver hub > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) > ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17 > ohci_hcd 0000:00:03.0: OHCI Host Controller > ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 > ohci_hcd 0000:00:03.0: irq 17, io mem 0xfebff000 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 4 ports detected > ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18 > ohci_hcd 0000:00:03.1: OHCI Host Controller > ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:03.1: irq 18, io mem 0xfebfe000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 4 ports detected > ACPI: PCI Interrupt 0000:00:03.3[C] -> GSI 22 (level, low) -> IRQ 19 > ehci_hcd 0000:00:03.3: EHCI Host Controller > ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3 > ehci_hcd 0000:00:03.3: irq 19, io mem 0xfebfd000 > ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 8 ports detected > usb 3-8: new high speed USB device using ehci_hcd and address 3 > usb 3-8: configuration #1 chosen from 1 choice > Initializing USB Mass Storage driver... > usb 2-2: new low speed USB device using ohci_hcd and address 2 > usb 2-2: configuration #1 chosen from 1 choice > scsi2 : SCSI emulation for USB Mass Storage devices > usbcore: registered new driver usb-storage > USB Mass Storage support registered. > usb-storage: device found at 3 > usb-storage: waiting for device to settle before scanning > usbcore: registered new driver hiddev > input: Logitech Logitech USB Optical Mouse as /class/input/input2 > input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on > usb-0000:00:03.1-2 > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > usbcore: registered new driver usbmouse > drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver > Non-volatile memory driver v1.2 > Asus Laptop ACPI Extras version 0.29 > no string returned by INIT > trying default values, supply the developers with your DSDT > ACPI: CPU0 (power states: C1[C1] C2[C2]) > ACPI: Processor [CPU1] (supports 8 throttling states) > ACPI: CPU1 (power states: C1[C1] C2[C2]) > ACPI: Processor [CPU2] (supports 8 throttling states) > ACPI Error (exoparg2-0397): Index value (0FFFFFFFB) beyond package end (A) > [20060127] > ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU1._PSS] > (Node f797b1e0), AE_AML_PACKAGE_LIMIT > ACPI Error (exoparg2-0397): Index value (0FFFFFFFB) beyond package end (A) > [20060127] > ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU2._PSS] > (Node f797bbc0), AE_AML_PACKAGE_LIMIT > device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com > EXT3 FS on sda5, internal journal > Vendor: Generic- Model: xD/SDMMC/MS/Pro Rev: 1.00 > Type: Direct-Access ANSI SCSI revision: 00 > sd 2:0:0:0: Attached scsi removable disk sdb > usb-storage: device scan complete > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sd 2:0:0:0: Attached scsi generic sg1 type 0 > Adding 524244k swap on /dev/sda8. Priority:-1 extents:1 across:524244k > SGI XFS with ACLs, large block numbers, no debug enabled > SGI XFS Quota Management subsystem > XFS mounting filesystem sda7 > Ending clean XFS mount for filesystem: sda7 > NTFS driver 2.1.27 [Flags: R/O DEBUG MODULE]. > NTFS volume version 3.1. > XFS mounting filesystem sda6 > Ending clean XFS mount for filesystem: sda6 > loop: loaded (max 8 devices, max 1 partitions per device) > hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 221104 > bytes,<6>...found (1024x768, 221056 bytes, v3). > bootsplash: status on console 0 changed to on > ACPI: AC Adapter [AC0] (on-line) > Netfilter messages via NETLINK v0.30. > ACPI: Battery Slot [BAT0] (battery present) > ACPI: Power Button (FF) [PWRF] > ACPI: Lid Switch [LID] > ACPI: Power Button (CM) [PWRB] > ACPI: Sleep Button (CM) [SLPB] > Using specific hotkey driver > ip_conntrack version 2.4 (8189 buckets, 65512 max) - 224 bytes per conntrack > ACPI: Thermal Zone [THRM] (56 C) > ACPI: Video Device [VGA_P0P1] (multi-head: yes rom: no post: no) > Removing netfilter NETLINK layer. > NET: Registered protocol family 17 > 8139too Fast Ethernet driver 0.9.27 > ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 16 > eth0: RealTek RTL8139 at 0xf91b6c00, 00:1b:fc:48:37:09, IRQ 16 > eth0: Identified 8139 chip type 'RTL-8100B/8139D' > eth0: link down > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ADDRCONF(NETDEV_UP): eth0: link is not ready > IPv6 over IPv4 tunneling driver > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory > NFSD: starting 90-second grace period > bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, > 19271 bytes, v3). > bootsplash: status on console 0 changed to on > bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, > 19271 bytes, v3). > bootsplash: status on console 1 changed to on > bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, > 19271 bytes, v3). > bootsplash: status on console 2 changed to on > bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, > 19271 bytes, v3). > bootsplash: status on console 3 changed to on > bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, > 19271 bytes, v3). > bootsplash: status on console 4 changed to on > bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, > 19271 bytes, v3). > bootsplash: status on console 5 changed to on > usb 3-1: new high speed USB device using ehci_hcd and address 4 > usb 3-1: configuration #1 chosen from 1 choice > scsi3 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 4 > usb-storage: waiting for device to settle before scanning > Vendor: USB Model: FLASH DISK Rev: 2.00 > Type: Direct-Access ANSI SCSI revision: 02 > ready > SCSI device sdc: 256000 512-byte hdwr sectors (131 MB) > sdc: Write Protect is off > sdc: Mode Sense: 03 00 00 00 > sdc: assuming drive cache: write through > SCSI device sdc: 256000 512-byte hdwr sectors (131 MB) > sdc: Write Protect is off > sdc: Mode Sense: 03 00 00 00 > sdc: assuming drive cache: write through > sdc: sdc1 sdc2 > sd 3:0:0:0: Attached scsi removable disk sdc > sd 3:0:0:0: Attached scsi generic sg2 type 0 > usb-storage: device scan complete > EXT2-fs warning: mounting fs with errors, running e2fsck is recommended > EXT2-fs error (device sdc2): ext2_check_page: bad entry in directory #2: > unaligned directory entry - offset=0, inode=4294967295, rec_len=65535, > name_len=255 > EXT2-fs error (device sdc2): ext2_readdir: bad page in #2 > EXT2-fs error (device sdc2): ext2_readdir: bad page in #2 > > > -- > Салют, /GLeb > > UIN: 15341920 > jabber://gleb@asd.iao.ru > sip://2387245@sipnet.ru (telephony) > skype://gleb_kulikov.tomsk (telephony) > sip://20000204@sip.pctel.ru (telephony) > netmail: 2:5005/78 > _______________________________________________ > Sisyphus mailing list > Sisyphus@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/sisyphus ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] [Comm] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-01 21:02 ` Aleksey Novodvorsky @ 2007-08-02 6:45 ` Gleb Kulikov 2007-08-13 9:33 ` Gleb Kulikov 1 sibling, 0 replies; 22+ messages in thread From: Gleb Kulikov @ 2007-08-02 6:45 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list В сообщении от Четверг 02 августа 2007 Aleksey Novodvorsky написал: > Глеб, спасибо! > Попробуем исправить. ждём беты :) -- Салют, /GLeb UIN: 15341920 jabber://gleb@asd.iao.ru sip://2387245@sipnet.ru (telephony) skype://gleb_kulikov.tomsk (telephony) sip://20000204@sip.pctel.ru (telephony) netmail: 2:5005/78 ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] [Comm] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( 2007-08-01 21:02 ` Aleksey Novodvorsky 2007-08-02 6:45 ` Gleb Kulikov @ 2007-08-13 9:33 ` Gleb Kulikov 1 sibling, 0 replies; 22+ messages in thread From: Gleb Kulikov @ 2007-08-13 9:33 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list В сообщении от Четверг 02 августа 2007 Aleksey Novodvorsky написал: > Глеб, спасибо! > Попробуем исправить. Добрый день, RC1 по-прежнему, в упор не видит дисковую подсистему. -- Салют, /GLeb UIN: 15341920 jabber://gleb@asd.iao.ru sip://2387245@sipnet.ru (telephony) skype://gleb_kulikov.tomsk (telephony) sip://20000204@sip.pctel.ru (telephony) netmail: 2:5005/78 ^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2008-04-22 11:19 UTC | newest] Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2007-07-31 8:35 [sisyphus] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :( Gleb Kulikov 2007-07-31 8:46 ` Шишков Евгений 2007-07-31 13:01 ` Gleb Kulikov 2007-08-01 5:03 ` Шишков Евгений 2007-08-01 5:42 ` Gleb Kulikov 2007-08-01 5:44 ` Gleb Kulikov 2007-08-01 6:36 ` Шишков Евгений 2007-08-01 7:51 ` Gleb Kulikov 2007-08-13 10:58 ` Хихин Руслан 2007-08-14 3:30 ` Gleb Kulikov 2007-08-14 5:28 ` Хихин Руслан 2007-08-14 9:39 ` Konstantin A. Lepikhov 2008-04-22 3:54 ` [sisyphus] desktop/server 4 " Gleb Kulikov 2008-04-22 11:19 ` Gleb Kulikov 2007-08-01 6:50 ` [sisyphus] [Comm] desktop/server 4 OR compact3 " Aleksey Novodvorsky 2007-08-01 8:05 ` Aleksey Novodvorsky 2007-08-01 8:43 ` Gleb Kulikov 2007-08-01 8:58 ` Aleksey Novodvorsky 2007-08-01 14:44 ` Gleb Kulikov 2007-08-01 21:02 ` Aleksey Novodvorsky 2007-08-02 6:45 ` Gleb Kulikov 2007-08-13 9:33 ` Gleb Kulikov
ALT Linux Sisyphus discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \ sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru public-inbox-index sisyphus Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sisyphus AGPL code for this site: git clone https://public-inbox.org/public-inbox.git