* [sisyphus] migration to raid
@ 2007-02-01 12:24 Alexander Volkov
2007-02-01 19:13 ` Grigory Batalov
` (2 more replies)
0 siblings, 3 replies; 22+ messages in thread
From: Alexander Volkov @ 2007-02-01 12:24 UTC (permalink / raw)
To: sisyphus
Hi!
Попал в засаду при попытке переезда на degraided raid. Need help.
Исходные данные:
sata установка C3.0 и ядро 2.6.16-wks26-up-alt8, в initrd добавлены модули
для ide и raid.
На другой машине взят один ide диск от зеркала, подмонтирован, на него
скопирована требуемая инсталляция при остановленном udevd, поправлены
lilo.conf,fstab.
И вот тут начинаются грабли.
При попытке выполнить лило, если в конфиге указано устройство md0:
lilo -r /mnt/disk
lilo: Fatal: Sorry, don't know how to handle device 0xfd03
(судя по рассылкам, такое недавно получил mike@ в новом инсталере)
если же указать в конфиге устройство /dev/hda и корень на hda5, то:
lilo -r /mnt/disk
/proc/devices: fopen failed: No such file or directory
lilo: Fatal: Trying to map files from unnamed device 0x0000 (NFS ?)
Куда же бедному крестьянину податься?
Это козни evms?
--
Regards, Alexander
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-01 12:24 [sisyphus] migration to raid Alexander Volkov
@ 2007-02-01 19:13 ` Grigory Batalov
2007-02-02 6:27 ` Alexander Volkov
2007-02-01 22:40 ` Michael Shigorin
2007-02-02 9:43 ` Alexander Volkov
2 siblings, 1 reply; 22+ messages in thread
From: Grigory Batalov @ 2007-02-01 19:13 UTC (permalink / raw)
To: sisyphus
On Thu, 1 Feb 2007 15:24:32 +0300, Alexander Volkov wrote:
> Попал в засаду при попытке переезда на degraided raid. Need help.
> Исходные данные:
> sata установка C3.0 и ядро 2.6.16-wks26-up-alt8, в initrd добавлены модули
> для ide и raid.
> На другой машине взят один ide диск от зеркала, подмонтирован, на него
> скопирована требуемая инсталляция при остановленном udevd, поправлены
> lilo.conf,fstab.
> И вот тут начинаются грабли.
> При попытке выполнить лило, если в конфиге указано устройство md0:
> lilo -r /mnt/disk
> lilo: Fatal: Sorry, don't know how to handle device 0xfd03
> (судя по рассылкам, такое недавно получил mike@ в новом инсталере)
>
> если же указать в конфиге устройство /dev/hda и корень на hda5, то:
> lilo -r /mnt/disk
> /proc/devices: fopen failed: No such file or directory
> lilo: Fatal: Trying to map files from unnamed device 0x0000 (NFS ?)
>
> Куда же бедному крестьянину податься?
>
> Это козни evms?
А Вы загрузились с /dev/hda* или c /dev/md* ?
Что пишет mount?
--
Grigory Batalov,
ALT Linux Team
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-01 19:13 ` Grigory Batalov
@ 2007-02-02 6:27 ` Alexander Volkov
0 siblings, 0 replies; 22+ messages in thread
From: Alexander Volkov @ 2007-02-02 6:27 UTC (permalink / raw)
To: sisyphus
On 2007-02-01 22:13:53 +0300, Grigory Batalov wrote:
GB> On Thu, 1 Feb 2007 15:24:32 +0300, Alexander Volkov wrote:
GB> А Вы загрузились с /dev/hda* или c /dev/md* ?
загружаться я всё ещё могу только с sda
GB> Что пишет mount?
/dev/sda7 on / type ext3 (rw)
proc on /proc type proc (rw,gid=19)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
udev on /dev type tmpfs (rw,size=5m)
/dev/pts on /dev/pts type none (rw)
shmfs on /dev/shm type tmpfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
192.168.2.99:/home/news on /home/news type nfs
(rw,rsize=8192,wsize=8192,addr=192.168.2.99)
/dev/md0 on /mnt/disk type ext3 (rw)
--
Regards, Alexander
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-01 12:24 [sisyphus] migration to raid Alexander Volkov
2007-02-01 19:13 ` Grigory Batalov
@ 2007-02-01 22:40 ` Michael Shigorin
2007-02-02 6:34 ` Alexander Volkov
2007-02-02 9:43 ` Alexander Volkov
2 siblings, 1 reply; 22+ messages in thread
From: Michael Shigorin @ 2007-02-01 22:40 UTC (permalink / raw)
To: sisyphus
On Thu, Feb 01, 2007 at 03:24:32PM +0300, Alexander Volkov wrote:
> Попал в засаду при попытке переезда на degraided raid. Need help.
root raid1 site:opennet.ru
http://www.opennet.ru/base/sys/root_soft_raid.txt.html
(спасибо abr@)
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-01 22:40 ` Michael Shigorin
@ 2007-02-02 6:34 ` Alexander Volkov
0 siblings, 0 replies; 22+ messages in thread
From: Alexander Volkov @ 2007-02-02 6:34 UTC (permalink / raw)
To: sisyphus
On 2007-02-02 00:40:30 +0200, Michael Shigorin wrote:
MS> On Thu, Feb 01, 2007 at 03:24:32PM +0300, Alexander Volkov wrote:
MS> > Попал в засаду при попытке переезда на degraided raid. Need help.
MS> root raid1 site:opennet.ru
MS> http://www.opennet.ru/base/sys/root_soft_raid.txt.html
MS> (спасибо abr@)
Эээ... mike, я такие переезды на 2.4 делал уже даже и не 2-3 раза..., а
можно сказать, регулярно ;)
Засада возникла именно на 2.6 (и гугл сказал, что бывает такая бяка...) и
нашей пакетной базе.
Единственное, что наталкивает на кое-какие мысли, это отсутствие
/etc/raidtab - кто то недавно тоже про это писАл...
Ща пойду мучить котенка (он в соседнем здании) дальше...
--
Regards, Alexander
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-01 12:24 [sisyphus] migration to raid Alexander Volkov
2007-02-01 19:13 ` Grigory Batalov
2007-02-01 22:40 ` Michael Shigorin
@ 2007-02-02 9:43 ` Alexander Volkov
2007-02-02 14:38 ` Alexander Volkov
` (2 more replies)
2 siblings, 3 replies; 22+ messages in thread
From: Alexander Volkov @ 2007-02-02 9:43 UTC (permalink / raw)
To: sisyphus
On 2007-02-01 15:24:32 +0300, Alexander Volkov wrote:
AV> Hi!
AV> Попал в засаду при попытке переезда на degraided raid. Need help.
AV> Куда же бедному крестьянину податься?
AV> Это козни evms?
Так, забил пока на сразу переехать. пытаюсь запуститься с / на raid.
Оставил пока в lilo.conf boot=/dev/sda
root=/dev/md0
fstab поправил
initrd перегенерил, ребутаюсь -
md: ругань про personality 1
после чего md останавливается и panic с невозможностью загрузиться с 9,0
при это мона загрузиться, указав root=/dev/hda5 (раздел с половинкой
рейда), оно при этом не запускает raid, но падает в single, где уже руками
грю
/lib/mkinitrd/busybox raidautorun /dev/md0
mount /dev/md0 -o remount,rw
telinit 3
и получаю загруженную систему...
ткните мож носом в initrd, что там не хватает?
--
Regards, Alexander
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-02 9:43 ` Alexander Volkov
@ 2007-02-02 14:38 ` Alexander Volkov
2007-02-02 14:46 ` Anton Gorlov
2007-02-02 15:55 ` Dmitry V. Levin
2007-02-02 19:07 ` Grigory Batalov
2007-02-04 16:24 ` Aleksey Avdeev
2 siblings, 2 replies; 22+ messages in thread
From: Alexander Volkov @ 2007-02-02 14:38 UTC (permalink / raw)
To: sisyphus
On 2007-02-02 12:43:42 +0300, Alexander Volkov wrote:
AV> On 2007-02-01 15:24:32 +0300, Alexander Volkov wrote:
AV> AV> Hi!
AV> AV> Попал в засаду при попытке переезда на degraided raid. Need help.
AV> AV> Куда же бедному крестьянину податься?
AV> AV> Это козни evms?
AV> Так, забил пока на сразу переехать. пытаюсь запуститься с / на raid.
AV> Оставил пока в lilo.conf boot=/dev/sda
AV> root=/dev/md0
AV> fstab поправил
AV> initrd перегенерил, ребутаюсь -
AV> md: ругань про personality 1
AV> после чего md останавливается и panic с невозможностью загрузиться с 9,0
AV> при это мона загрузиться, указав root=/dev/hda5 (раздел с половинкой
AV> рейда), оно при этом не запускает raid, но падает в single, где уже руками
AV> грю
AV> /lib/mkinitrd/busybox raidautorun /dev/md0
AV> mount /dev/md0 -o remount,rw
AV> telinit 3
AV> и получаю загруженную систему...
AV> ткните мож носом в initrd, что там не хватает?
В общем, засада нынче переезжать на raid, а на degraded так и вообще
невозможно из-за lilo.
Пока не закончится синхронизация - lilo не может установить загрузчик.
Я таки переехал с помощью такой-то матери, но последовательность действий
навряд воспроизведу - тыкался во всё подряд...
--
Regards, Alexander
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-02 14:38 ` Alexander Volkov
@ 2007-02-02 14:46 ` Anton Gorlov
2007-02-02 15:48 ` Alexander Volkov
2007-02-02 15:55 ` Dmitry V. Levin
1 sibling, 1 reply; 22+ messages in thread
From: Anton Gorlov @ 2007-02-02 14:46 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
Alexander Volkov пишет:
> Я таки переехал с помощью такой-то матери, но последовательность действий
> навряд воспроизведу - тыкался во всё подряд...
Неужели лило на столько разломана???
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-02 14:46 ` Anton Gorlov
@ 2007-02-02 15:48 ` Alexander Volkov
0 siblings, 0 replies; 22+ messages in thread
From: Alexander Volkov @ 2007-02-02 15:48 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
On 2007-02-02 17:46:07 +0300, Anton Gorlov wrote:
AG> Alexander Volkov пишет:
AG> > Я таки переехал с помощью такой-то матери, но последовательность действий
AG> > навряд воспроизведу - тыкался во всё подряд...
AG> Неужели лило на столько разломана???
Навряд это только лило - тут ещё udev с evms и devmapper увязаны...
--
Regards, Alexander
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-02 14:38 ` Alexander Volkov
2007-02-02 14:46 ` Anton Gorlov
@ 2007-02-02 15:55 ` Dmitry V. Levin
2007-02-02 16:01 ` Alexander Volkov
1 sibling, 1 reply; 22+ messages in thread
From: Dmitry V. Levin @ 2007-02-02 15:55 UTC (permalink / raw)
To: ALT Linux Sisyphus mailing list
[-- Attachment #1: Type: text/plain, Size: 289 bytes --]
On Fri, Feb 02, 2007 at 05:38:11PM +0300, Alexander Volkov wrote:
[...]
> В общем, засада нынче переезжать на raid, а на degraded так и вообще
> невозможно из-за lilo.
> Пока не закончится синхронизация - lilo не может установить загрузчик.
Fixed in lilo-22.7.3-alt4
--
ldv
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-02 15:55 ` Dmitry V. Levin
@ 2007-02-02 16:01 ` Alexander Volkov
2007-02-03 23:56 ` Andrew Kornilov
0 siblings, 1 reply; 22+ messages in thread
From: Alexander Volkov @ 2007-02-02 16:01 UTC (permalink / raw)
To: ALT Linux Sisyphus mailing list
On 2007-02-02 18:55:53 +0300, Dmitry V. Levin wrote:
DVL> On Fri, Feb 02, 2007 at 05:38:11PM +0300, Alexander Volkov wrote:
DVL> [...]
DVL> > В общем, засада нынче переезжать на raid, а на degraded так и вообще
DVL> > невозможно из-за lilo.
DVL> > Пока не закончится синхронизация - lilo не может установить загрузчик.
DVL> Fixed in lilo-22.7.3-alt4
Respect, проверю как обсизифлю какую-ть машинку :)
--
Regards, Alexander
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-02 16:01 ` Alexander Volkov
@ 2007-02-03 23:56 ` Andrew Kornilov
2007-02-04 8:18 ` Sergey Vlasov
0 siblings, 1 reply; 22+ messages in thread
From: Andrew Kornilov @ 2007-02-03 23:56 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
Alexander Volkov wrote:
> DVL> > В общем, засада нынче переезжать на raid, а на degraded так и вообще
> DVL> > невозможно из-за lilo.
> DVL> > Пока не закончится синхронизация - lilo не может установить загрузчик.
>
> DVL> Fixed in lilo-22.7.3-alt4
> Respect, проверю как обсизифлю какую-ть машинку :)
>
Вот это не поможет? Сам когда-то долбался с lilo (вместе с vsu@ и всеми
остальными на #altlinux, даже баг вроде бы какой-то повесил), потом
плюнул и по совету Алексея Морозова легко и непринужденно стал
использовать grub:
http://wiki.sisyphus.ru/admin/CreateMdRAID1onLiveSystem
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-03 23:56 ` Andrew Kornilov
@ 2007-02-04 8:18 ` Sergey Vlasov
2007-02-04 10:43 ` Dmitry V. Levin
0 siblings, 1 reply; 22+ messages in thread
From: Sergey Vlasov @ 2007-02-04 8:18 UTC (permalink / raw)
To: sisyphus
[-- Attachment #1: Type: text/plain, Size: 971 bytes --]
On Sun, Feb 04, 2007 at 01:56:05AM +0200, Andrew Kornilov wrote:
> Alexander Volkov wrote:
> > DVL> > В общем, засада нынче переезжать на raid, а на degraded так и вообще
> > DVL> > невозможно из-за lilo.
> > DVL> > Пока не закончится синхронизация - lilo не может установить загрузчик.
> >
> > DVL> Fixed in lilo-22.7.3-alt4
> > Respect, проверю как обсизифлю какую-ть машинку :)
> >
> Вот это не поможет? Сам когда-то долбался с lilo (вместе с vsu@ и всеми
> остальными на #altlinux, даже баг вроде бы какой-то повесил), потом
> плюнул и по совету Алексея Морозова легко и непринужденно стал
> использовать grub:
> http://wiki.sisyphus.ru/admin/CreateMdRAID1onLiveSystem
| mdadm -Cv /dev/md1 --level=1 --raid-devices=2 missing /dev/sdb1
Вот такой вариант как раз и не работает - проблема в том, что missing
указан первым, а с какой-то версии lilo такая конфигурация перестала
обрабатываться нормально (именно это и исправлялось в 22.7.3-alt4).
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-04 8:18 ` Sergey Vlasov
@ 2007-02-04 10:43 ` Dmitry V. Levin
0 siblings, 0 replies; 22+ messages in thread
From: Dmitry V. Levin @ 2007-02-04 10:43 UTC (permalink / raw)
To: ALT Linux Sisyphus mailing list
[-- Attachment #1: Type: text/plain, Size: 1232 bytes --]
On Sun, Feb 04, 2007 at 11:18:39AM +0300, Sergey Vlasov wrote:
> On Sun, Feb 04, 2007 at 01:56:05AM +0200, Andrew Kornilov wrote:
> > Alexander Volkov wrote:
> > > DVL> > В общем, засада нынче переезжать на raid, а на degraded так и вообще
> > > DVL> > невозможно из-за lilo.
> > > DVL> > Пока не закончится синхронизация - lilo не может установить загрузчик.
> > >
> > > DVL> Fixed in lilo-22.7.3-alt4
> > > Respect, проверю как обсизифлю какую-ть машинку :)
> > >
> > Вот это не поможет? Сам когда-то долбался с lilo (вместе с vsu@ и всеми
> > остальными на #altlinux, даже баг вроде бы какой-то повесил), потом
> > плюнул и по совету Алексея Морозова легко и непринужденно стал
> > использовать grub:
> > http://wiki.sisyphus.ru/admin/CreateMdRAID1onLiveSystem
>
> | mdadm -Cv /dev/md1 --level=1 --raid-devices=2 missing /dev/sdb1
>
> Вот такой вариант как раз и не работает - проблема в том, что missing
> указан первым, а с какой-то версии lilo
С версии 22.7
> такая конфигурация перестала
> обрабатываться нормально (именно это и исправлялось в 22.7.3-alt4).
В качестве workaround'а, если сложно обновить пакет lilo, достаточно
поменять местами параметры missing и /dev/sdb1.
--
ldv
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-02 9:43 ` Alexander Volkov
2007-02-02 14:38 ` Alexander Volkov
@ 2007-02-02 19:07 ` Grigory Batalov
2007-02-04 16:24 ` Aleksey Avdeev
2 siblings, 0 replies; 22+ messages in thread
From: Grigory Batalov @ 2007-02-02 19:07 UTC (permalink / raw)
To: sisyphus
On Fri, 2 Feb 2007 12:43:42 +0300, Alexander Volkov wrote:
> AV> Попал в засаду при попытке переезда на degraided raid. Need help.
> AV> Куда же бедному крестьянину податься?
>
> AV> Это козни evms?
> Так, забил пока на сразу переехать. пытаюсь запуститься с / на raid.
> Оставил пока в lilo.conf boot=/dev/sda
> root=/dev/md0
> fstab поправил
> initrd перегенерил, ребутаюсь -
> md: ругань про personality 1
Это оттого, что raid1.ko в initrd не попал.
mkinitrd --with=raid1 ...
> после чего md останавливается и panic с невозможностью загрузиться с 9,0
> при это мона загрузиться, указав root=/dev/hda5 (раздел с половинкой
> рейда), оно при этом не запускает raid, но падает в single, где уже руками
> грю
> /lib/mkinitrd/busybox raidautorun /dev/md0
> mount /dev/md0 -o remount,rw
> telinit 3
> и получаю загруженную систему...
> ткните мож носом в initrd, что там не хватает?
--
Grigory Batalov,
ALT Linux Team
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-02 9:43 ` Alexander Volkov
2007-02-02 14:38 ` Alexander Volkov
2007-02-02 19:07 ` Grigory Batalov
@ 2007-02-04 16:24 ` Aleksey Avdeev
2007-02-04 18:04 ` Sergey Vlasov
2 siblings, 1 reply; 22+ messages in thread
From: Aleksey Avdeev @ 2007-02-04 16:24 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
[-- Attachment #1: Type: text/plain, Size: 1047 bytes --]
Alexander Volkov пишет:
> On 2007-02-01 15:24:32 +0300, Alexander Volkov wrote:
> AV> Hi!
> AV> Попал в засаду при попытке переезда на degraided raid. Need help.
> AV> Куда же бедному крестьянину податься?
>
> AV> Это козни evms?
> Так, забил пока на сразу переехать. пытаюсь запуститься с / на raid.
> Оставил пока в lilo.conf boot=/dev/sda
> root=/dev/md0
> fstab поправил
> initrd перегенерил, ребутаюсь -
> md: ругань про personality 1
> после чего md останавливается и panic с невозможностью загрузиться с 9,0
> при это мона загрузиться, указав root=/dev/hda5 (раздел с половинкой
> рейда), оно при этом не запускает raid, но падает в single, где уже руками
> грю
> /lib/mkinitrd/busybox raidautorun /dev/md0
> mount /dev/md0 -o remount,rw
> telinit 3
> и получаю загруженную систему...
> ткните мож носом в initrd, что там не хватает?
/dev/md0 создавалось с помощью evms или mdadm?
PS: У меня нормально стартовали только /dev/md* созданные mdadm`ом,
созданные evms -- нет.
--
С уважением. Алексей.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 548 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-04 16:24 ` Aleksey Avdeev
@ 2007-02-04 18:04 ` Sergey Vlasov
2007-02-04 19:06 ` Aleksey Avdeev
0 siblings, 1 reply; 22+ messages in thread
From: Sergey Vlasov @ 2007-02-04 18:04 UTC (permalink / raw)
To: sisyphus
[-- Attachment #1: Type: text/plain, Size: 533 bytes --]
On Sun, Feb 04, 2007 at 07:24:18PM +0300, Aleksey Avdeev wrote:
> /dev/md0 создавалось с помощью evms или mdadm?
>
> PS: У меня нормально стартовали только /dev/md* созданные mdadm`ом,
> созданные evms -- нет.
Какую версию суперблока md использует evms? Была информация, что там
по умолчанию используется что-то из 1.x, в то время как автозапуск md
средствами ядра (используемый в текущих версиях mkinitrd) поддерживает
только суперблоки версии 0.90. Кстати, в lilo поддержки новых
форматов суперблоков md тоже нет.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-04 18:04 ` Sergey Vlasov
@ 2007-02-04 19:06 ` Aleksey Avdeev
2007-02-04 20:15 ` Sergey Vlasov
0 siblings, 1 reply; 22+ messages in thread
From: Aleksey Avdeev @ 2007-02-04 19:06 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
[-- Attachment #1: Type: text/plain, Size: 818 bytes --]
Sergey Vlasov пишет:
> On Sun, Feb 04, 2007 at 07:24:18PM +0300, Aleksey Avdeev wrote:
>
>> /dev/md0 создавалось с помощью evms или mdadm?
>>
>>PS: У меня нормально стартовали только /dev/md* созданные mdadm`ом,
>>созданные evms -- нет.
>
>
> Какую версию суперблока md использует evms? Была информация, что там
> по умолчанию используется что-то из 1.x, в то время как автозапуск md
> средствами ядра (используемый в текущих версиях mkinitrd) поддерживает
> только суперблоки версии 0.90. Кстати, в lilo поддержки новых
> форматов суперблоков md тоже нет.
Не знаю: переключатель, для использования версии 1 там есть... Но я не
заметил отличия в результатах, при смене его состояния (может плохо
смотрел: все те разы, когда этим занимался -- в запаре был).
--
С уважением. Алексей.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 548 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-04 19:06 ` Aleksey Avdeev
@ 2007-02-04 20:15 ` Sergey Vlasov
2007-02-04 20:34 ` Aleksey Avdeev
2007-02-04 22:11 ` Konstantin A. Lepikhov
0 siblings, 2 replies; 22+ messages in thread
From: Sergey Vlasov @ 2007-02-04 20:15 UTC (permalink / raw)
To: sisyphus
[-- Attachment #1: Type: text/plain, Size: 853 bytes --]
On Sun, Feb 04, 2007 at 10:06:41PM +0300, Aleksey Avdeev wrote:
> > Какую версию суперблока md использует evms? Была информация, что там
> > по умолчанию используется что-то из 1.x, в то время как автозапуск md
> > средствами ядра (используемый в текущих версиях mkinitrd) поддерживает
> > только суперблоки версии 0.90. Кстати, в lilo поддержки новых
> > форматов суперблоков md тоже нет.
>
> Не знаю: переключатель, для использования версии 1 там есть... Но я не
> заметил отличия в результатах, при смене его состояния (может плохо
> смотрел: все те разы, когда этим занимался -- в запаре был).
Можно посмотреть, кроме всего прочего, с помощью:
/lib/udev/vol_id --export /dev/sdX
(указывать компонент массива, а не /dev/mdX).
Получится что-то вроде:
ID_FS_USAGE=raid
ID_FS_TYPE=linux_raid_member
ID_FS_VERSION=0.90.1
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-04 20:15 ` Sergey Vlasov
@ 2007-02-04 20:34 ` Aleksey Avdeev
2007-02-04 22:11 ` Konstantin A. Lepikhov
1 sibling, 0 replies; 22+ messages in thread
From: Aleksey Avdeev @ 2007-02-04 20:34 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
[-- Attachment #1: Type: text/plain, Size: 1296 bytes --]
Sergey Vlasov пишет:
> On Sun, Feb 04, 2007 at 10:06:41PM +0300, Aleksey Avdeev wrote:
>
>>>Какую версию суперблока md использует evms? Была информация, что там
>>>по умолчанию используется что-то из 1.x, в то время как автозапуск md
>>>средствами ядра (используемый в текущих версиях mkinitrd) поддерживает
>>>только суперблоки версии 0.90. Кстати, в lilo поддержки новых
>>>форматов суперблоков md тоже нет.
>>
>> Не знаю: переключатель, для использования версии 1 там есть... Но я не
>>заметил отличия в результатах, при смене его состояния (может плохо
>>смотрел: все те разы, когда этим занимался -- в запаре был).
>
>
> Можно посмотреть, кроме всего прочего, с помощью:
>
> /lib/udev/vol_id --export /dev/sdX
>
> (указывать компонент массива, а не /dev/mdX).
>
> Получится что-то вроде:
>
> ID_FS_USAGE=raid
> ID_FS_TYPE=linux_raid_member
> ID_FS_VERSION=0.90.1
Для системы с /dev/mdX, созданным через mdadm.
$ sudo -H /lib/udev/vol_id /dev/hdc5
ID_FS_USAGE=raid
ID_FS_TYPE=linux_raid_member
ID_FS_VERSION=0.90.0
ID_FS_UUID=2d457cba-802b-1bca-fe16-4fd3aaf6d7fc
ID_FS_LABEL=
ID_FS_LABEL_SAFE=
Систем, с /dev/mdX созданным через evms. в наличии у меня нет (будет
возможность экспериментов -- проверю).
--
С уважением. Алексей.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 548 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-04 20:15 ` Sergey Vlasov
2007-02-04 20:34 ` Aleksey Avdeev
@ 2007-02-04 22:11 ` Konstantin A. Lepikhov
2007-02-04 22:52 ` Aleksey Avdeev
1 sibling, 1 reply; 22+ messages in thread
From: Konstantin A. Lepikhov @ 2007-02-04 22:11 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
Hi Sergey!
Sunday 04, at 11:15:14 PM you wrote:
> On Sun, Feb 04, 2007 at 10:06:41PM +0300, Aleksey Avdeev wrote:
> > > Какую версию суперблока md использует evms? Была информация, что там
> > > по умолчанию используется что-то из 1.x, в то время как автозапуск md
> > > средствами ядра (используемый в текущих версиях mkinitrd) поддерживает
> > > только суперблоки версии 0.90. Кстати, в lilo поддержки новых
> > > форматов суперблоков md тоже нет.
> >
> > Не знаю: переключатель, для использования версии 1 там есть... Но я не
> > заметил отличия в результатах, при смене его состояния (может плохо
> > смотрел: все те разы, когда этим занимался -- в запаре был).
>
> Можно посмотреть, кроме всего прочего, с помощью:
>
> /lib/udev/vol_id --export /dev/sdX
>
> (указывать компонент массива, а не /dev/mdX).
>
> Получится что-то вроде:
>
> ID_FS_USAGE=raid
> ID_FS_TYPE=linux_raid_member
> ID_FS_VERSION=0.90.1
[root@lks ~]# /lib/udev/vol_id --export /dev/sda5
ID_FS_USAGE=raid
ID_FS_TYPE=linux_raid_member
ID_FS_VERSION=0.90.0
ID_FS_UUID=xxxxxx
ID_FS_LABEL=
ID_FS_LABEL_SAFE=
md создан средствами evms.
--
WBR et al.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [sisyphus] migration to raid
2007-02-04 22:11 ` Konstantin A. Lepikhov
@ 2007-02-04 22:52 ` Aleksey Avdeev
0 siblings, 0 replies; 22+ messages in thread
From: Aleksey Avdeev @ 2007-02-04 22:52 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
[-- Attachment #1: Type: text/plain, Size: 1283 bytes --]
Konstantin A. Lepikhov пишет:
> Hi Sergey!
>
> Sunday 04, at 11:15:14 PM you wrote:
>
>
>>On Sun, Feb 04, 2007 at 10:06:41PM +0300, Aleksey Avdeev wrote:
>>
>>>>Какую версию суперблока md использует evms? Была информация, что там
>>>>по умолчанию используется что-то из 1.x, в то время как автозапуск md
>>>>средствами ядра (используемый в текущих версиях mkinitrd) поддерживает
>>>>только суперблоки версии 0.90. Кстати, в lilo поддержки новых
>>>>форматов суперблоков md тоже нет.
>>>
>>> Не знаю: переключатель, для использования версии 1 там есть... Но я не
>>>заметил отличия в результатах, при смене его состояния (может плохо
>>>смотрел: все те разы, когда этим занимался -- в запаре был).
>>
>>Можно посмотреть, кроме всего прочего, с помощью:
>>
>> /lib/udev/vol_id --export /dev/sdX
>>
>>(указывать компонент массива, а не /dev/mdX).
>>
>>Получится что-то вроде:
>>
>>ID_FS_USAGE=raid
>>ID_FS_TYPE=linux_raid_member
>>ID_FS_VERSION=0.90.1
>
>
> [root@lks ~]# /lib/udev/vol_id --export /dev/sda5
> ID_FS_USAGE=raid
> ID_FS_TYPE=linux_raid_member
> ID_FS_VERSION=0.90.0
> ID_FS_UUID=xxxxxx
> ID_FS_LABEL=
> ID_FS_LABEL_SAFE=
>
> md создан средствами evms.
Тогда -- ни фига не понимаю...
--
С уважением. Алексей.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 548 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2007-02-04 22:52 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-01 12:24 [sisyphus] migration to raid Alexander Volkov
2007-02-01 19:13 ` Grigory Batalov
2007-02-02 6:27 ` Alexander Volkov
2007-02-01 22:40 ` Michael Shigorin
2007-02-02 6:34 ` Alexander Volkov
2007-02-02 9:43 ` Alexander Volkov
2007-02-02 14:38 ` Alexander Volkov
2007-02-02 14:46 ` Anton Gorlov
2007-02-02 15:48 ` Alexander Volkov
2007-02-02 15:55 ` Dmitry V. Levin
2007-02-02 16:01 ` Alexander Volkov
2007-02-03 23:56 ` Andrew Kornilov
2007-02-04 8:18 ` Sergey Vlasov
2007-02-04 10:43 ` Dmitry V. Levin
2007-02-02 19:07 ` Grigory Batalov
2007-02-04 16:24 ` Aleksey Avdeev
2007-02-04 18:04 ` Sergey Vlasov
2007-02-04 19:06 ` Aleksey Avdeev
2007-02-04 20:15 ` Sergey Vlasov
2007-02-04 20:34 ` Aleksey Avdeev
2007-02-04 22:11 ` Konstantin A. Lepikhov
2007-02-04 22:52 ` Aleksey Avdeev
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git