* [sisyphus] Ловля 3D на Xorg 7.0 и Radeon 9200 :) Иногда удачно.
@ 2006-03-04 20:18 Fiodor Sorex
2006-03-04 20:43 ` Konstantin A. Lepikhov
2006-03-04 20:46 ` Sergey Vlasov
0 siblings, 2 replies; 6+ messages in thread
From: Fiodor Sorex @ 2006-03-04 20:18 UTC (permalink / raw)
To: sisyphus
[-- Attachment #1: Type: text/plain, Size: 1349 bytes --]
Добрый день!
Уже где-то с полгода периодически вылавливаю поддержку 3D на текущем
Сизифе. Так чтобы всегда она была не получается.
Появляется только если (пере)обновить иксы, или какую-то часть,
причастную к 3D например libdrm. После перезагрузки все слетает. Где
смотреть?
Подробнее:
Вот сейчас сделал:
# apt-get install --reinstall
kernel-modules-drm-std26-up#2006.02.23-alt1.132622.5
И получил:
$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
Ура! Все игры запускаются как положено.
НО! Стоит только перезагрузить компьютер, и получаем:
$ glxinfo
name of display: :0.0
libGL error: open DRM failed (Operation not permitted)
libGL error: reverting to (slow) indirect rendering
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
Как бы закрепить эффект указанный выше? :)
Имеем:
kernel-modules-drm-std26-up#2006.02.23-alt1.132622.5
libdrm-2.0-alt3
libmesa-6.4.2-alt1
xorg-x11-extensions-dri-1.0.1-alt12
xorg-x11-dri-ati-6.4.2-alt1
xorg-x11-mesagl-7.0.0-alt9
ядро 2.6.14-std26-up-alt5
xorg.conf в аттаче
карта ATI Technologies Inc RV280 [Radeon 9200 SE]
В логах ничего значимого.
Может что-то ещё посмотреть где-то?
--
Федор Сорекс, http://www.linuxrsp.ru
http://moscow.lug.ru
[-- Attachment #2: xorg.conf --]
[-- Type: text/plain, Size: 7117 bytes --]
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
# Driver "kbd"
Driver "kbd"
Option "AutoRepeat" "250 30"
Option "XkbModel" "pc105"
Option "XkbVariant" ",winkeys" ###,,,
Option "XkbLayout" "us,ru"
###"us,ru"
Option "XkbOptions" "grp:ctrl_shift_toggle"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
# Option "Device" "/dev/mouse"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
Option "Resolution" "200"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
# This loads the Video for Linux module.
# Load "v4l"
Load "glx"
# Load "drm"
Load "GLcore"
Load "dri"
Load "extmod"
# Load "fglrx"
# Load "glx"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
Section "DRI"
Mode 0666
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "monitor1"
# VendorName "Unknown"
# ModelName "Unknown"
VendorName "SONY"
ModelName "CPD-E230"
DisplaySize 328 245
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-85
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 48-170
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
#ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
#ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
#ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
# from asp 7.3
#1024x768 @ 100.0 Hz, 80.2 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
#800x600 @ 100.0 Hz, 64.0 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
#640x480 @ 100.0 Hz, 53.0 kHz hsync
Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "ATI Radeon"
# Identifier "Radeon 9200SE"
# Option "no_accel" "no"
# Option "no_dri" "no"
# Driver "fglrx"
VendorName "Unknown"
BoardName "Unknown"
# Driver "ati"
Driver "ati"
#-- Driver "ati"
# VideoRam 65536
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "AGPMode" "4"
Option "DPMS" "on"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "ATI Radeon"
Monitor "monitor1"
DefaultColorDepth 24
Option "Accel"
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [sisyphus] Ловля 3D на Xorg 7.0 и Radeon 9200 :) Иногда удачно.
2006-03-04 20:18 [sisyphus] Ловля 3D на Xorg 7.0 и Radeon 9200 :) Иногда удачно Fiodor Sorex
@ 2006-03-04 20:43 ` Konstantin A. Lepikhov
2006-03-06 20:14 ` Fiodor Sorex
2006-03-04 20:46 ` Sergey Vlasov
1 sibling, 1 reply; 6+ messages in thread
From: Konstantin A. Lepikhov @ 2006-03-04 20:43 UTC (permalink / raw)
To: sisyphus
[-- Attachment #1: Type: text/plain, Size: 631 bytes --]
Hi Fiodor!
Saturday 04, at 11:18:21 PM you wrote:
> Load "glx"
> # Load "drm"
> Load "GLcore"
> Load "dri"
По-логике, правильный вариант такой:
Load "glx"
Load "dri"
- все остальное загрузится само.
Также проверьте, что у вас выдает команда LIBGL_DEBUG=verbose glxinfo
(кажется, эта команда скоро станет синонимом RTFM :)
--
WBR, Konstantin chat with ==>ICQ: 109916175
Lepikhov, speak to ==>JID: lakostis@jabber.org
aka L.A. Kostis write to ==>mailto:lakostis@pisem.net.nospam
...The information is like the bank... (c) EC8OR
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 1495 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [sisyphus] Ловля 3D на Xorg 7.0 и Radeon 9200 :) Иногда удачно.
2006-03-04 20:43 ` Konstantin A. Lepikhov
@ 2006-03-06 20:14 ` Fiodor Sorex
0 siblings, 0 replies; 6+ messages in thread
From: Fiodor Sorex @ 2006-03-06 20:14 UTC (permalink / raw)
To: sisyphus
4 марта 2006 23:43, Konstantin A. Lepikhov пишет:
> Hi Fiodor!
>
> Saturday 04, at 11:18:21 PM you wrote:
> > Load "glx"
> > # Load "drm"
> > Load "GLcore"
> > Load "dri"
>
> По-логике, правильный вариант такой:
> Load "glx"
> Load "dri"
> - все остальное загрузится само.
Так и оставил.
>
> Также проверьте, что у вас выдает команда LIBGL_DEBUG=verbose glxinfo
> (кажется, эта команда скоро станет синонимом RTFM :)
Даже не знал про такое :)
$ LIBGL_DEBUG=verbose glxinfo
name of display: :0.0
libGL: XF86DRIGetClientDriverName: 5.0.3 r200 (screen 0)
libGL: OpenDriver: trying /usr/lib/X11/modules/dri/r200_dri.so
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Permission denied)
drmOpenDevice: open result is -1, (Permission denied)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -13
drmOpenDevice: node name is /dev/dri/card1
drmOpenByBusid: drmOpenMinor returns -1003
drmOpenDevice: node name is /dev/dri/card2
drmOpenByBusid: drmOpenMinor returns -1003
drmOpenDevice: node name is /dev/dri/card3
drmOpenByBusid: drmOpenMinor returns -1003
drmOpenDevice: node name is /dev/dri/card4
drmOpenByBusid: drmOpenMinor returns -1003
....и т.д. до 14...
libGL error: open DRM failed (Operation not permitted)
libGL error: reverting to (slow) indirect rendering
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
Ну теперь вижу почему:
$ ls -la /dev/dri/
итого 0
drwxr-xr-x 2 root root 60 Мар 6 22:58 .
drwxr-xr-x 22 root root 7940 Мар 6 22:58 ..
crw-rw---- 1 root xgrp 226, 0 Мар 6 22:58 card0
--
Федор Сорекс, http://www.linuxrsp.ru
http://moscow.lug.ru
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [sisyphus] Ловля 3D на Xorg 7.0 и Radeon 9200 :) Иногда удачно.
2006-03-04 20:18 [sisyphus] Ловля 3D на Xorg 7.0 и Radeon 9200 :) Иногда удачно Fiodor Sorex
2006-03-04 20:43 ` Konstantin A. Lepikhov
@ 2006-03-04 20:46 ` Sergey Vlasov
2006-03-06 20:12 ` Fiodor Sorex
1 sibling, 1 reply; 6+ messages in thread
From: Sergey Vlasov @ 2006-03-04 20:46 UTC (permalink / raw)
To: sorex, ALT Linux Sisyphus discussion list
[-- Attachment #1: Type: text/plain, Size: 2062 bytes --]
On Sat, Mar 04, 2006 at 11:18:21PM +0300, Fiodor Sorex wrote:
> Уже где-то с полгода периодически вылавливаю поддержку 3D на текущем
> Сизифе. Так чтобы всегда она была не получается.
>
> Появляется только если (пере)обновить иксы, или какую-то часть,
> причастную к 3D например libdrm. После перезагрузки все слетает. Где
> смотреть?
>
> Подробнее:
>
> Вот сейчас сделал:
>
> # apt-get install --reinstall
> kernel-modules-drm-std26-up#2006.02.23-alt1.132622.5
Это само по себе не может дать такой эффект. Возможно, дело в том,
что после этого был выполнен перезапуск X или что-то подобное.
> И получил:
>
> $ glxinfo
> name of display: :0.0
> display: :0 screen: 0
> direct rendering: Yes
> server glx vendor string: SGI
> server glx version string: 1.2
>
> Ура! Все игры запускаются как положено.
>
> НО! Стоит только перезагрузить компьютер, и получаем:
>
> $ glxinfo
> name of display: :0.0
> libGL error: open DRM failed (Operation not permitted)
Что при этом говорит ls -la /dev/dri/ ?
> Section "Module"
>
> # This loads the DBE extension module.
>
> Load "dbe"
>
> # This loads the Video for Linux module.
> # Load "v4l"
>
>
> Load "glx"
> # Load "drm"
> Load "GLcore"
GLcore вроде бы явно грузить не нужно.
> Load "dri"
> Load "extmod"
> # Load "fglrx"
> # Load "glx"
>
>
> # This loads the miscellaneous extensions module, and disables
> # initialisation of the XFree86-DGA extension within that module.
>
> SubSection "extmod"
> #Option "omit xfree86-dga"
> EndSubSection
Это то же самое, что Load "extmod" выше.
>
> # This loads the Type1 and FreeType font modules
>
> Load "type1"
> Load "freetype"
> EndSection
>
>
> Section "DRI"
> Mode 0666
> EndSection
А вот эта секция сейчас, похоже, молча игнорируется - по крайней мере,
у меня при таком же 0666 фактически для /dev/dri/card0 ставятся права
0600, vsu:xgrp. Вероятно, нужно копать в сторону pam_console.
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [sisyphus] Ловля 3D на Xorg 7.0 и Radeon 9200 :) Иногда удачно.
2006-03-04 20:46 ` Sergey Vlasov
@ 2006-03-06 20:12 ` Fiodor Sorex
2006-03-09 20:02 ` Fiodor Sorex
0 siblings, 1 reply; 6+ messages in thread
From: Fiodor Sorex @ 2006-03-06 20:12 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
4 марта 2006 23:46, Sergey Vlasov пишет:
> On Sat, Mar 04, 2006 at 11:18:21PM +0300, Fiodor Sorex wrote:
> > Уже где-то с полгода периодически вылавливаю поддержку 3D на
> > текущем Сизифе. Так чтобы всегда она была не получается.
> >
> > Появляется только если (пере)обновить иксы, или какую-то часть,
> > причастную к 3D например libdrm. После перезагрузки все слетает.
> > Где смотреть?
> >
> > Подробнее:
> >
> > Вот сейчас сделал:
> >
> > # apt-get install --reinstall
> > kernel-modules-drm-std26-up#2006.02.23-alt1.132622.5
>
> Это само по себе не может дать такой эффект. Возможно, дело в том,
> что после этого был выполнен перезапуск X или что-то подобное.
Обычно да, но в тот раз просто запускал/вюключил иксы с другой консоли.
>
> > И получил:
> >
> > $ glxinfo
> > name of display: :0.0
> > display: :0 screen: 0
> > direct rendering: Yes
> > server glx vendor string: SGI
> > server glx version string: 1.2
> >
> > Ура! Все игры запускаются как положено.
> >
> > НО! Стоит только перезагрузить компьютер, и получаем:
> >
> > $ glxinfo
> > name of display: :0.0
> > libGL error: open DRM failed (Operation not permitted)
>
> Что при этом говорит ls -la /dev/dri/ ?
Ага! Вот что:
$ ls -la /dev/dri/
итого 0
drwxr-xr-x 2 root root 60 Мар 6 21:40 .
drwxr-xr-x 22 root root 7940 Мар 6 21:40 ..
crw-rw---- 1 root xgrp 226, 0 Мар 6 21:40 card0
> > Load "GLcore"
>
> GLcore вроде бы явно грузить не нужно.
>
> Это то же самое, что Load "extmod" выше.
убрал
> > Section "DRI"
> > Mode 0666
> > EndSection
>
> А вот эта секция сейчас, похоже, молча игнорируется - по крайней
> мере, у меня при таком же 0666 фактически для /dev/dri/card0 ставятся
> права 0600, vsu:xgrp. Вероятно, нужно копать в сторону pam_console.
Похоже именно оно. Ибо 0660 root:xgrp
А что (где конкретно) смотреть в pam_console?
--
Федор Сорекс, http://www.linuxrsp.ru
http://moscow.lug.ru
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [sisyphus] Ловля 3D на Xorg 7.0 и Radeon 9200 :) Иногда удачно.
2006-03-06 20:12 ` Fiodor Sorex
@ 2006-03-09 20:02 ` Fiodor Sorex
0 siblings, 0 replies; 6+ messages in thread
From: Fiodor Sorex @ 2006-03-09 20:02 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
6 марта 2006 23:12, Fiodor Sorex пишет:
> 4 марта 2006 23:46, Sergey Vlasov пишет:
> > On Sat, Mar 04, 2006 at 11:18:21PM +0300, Fiodor Sorex wrote:
> > > Уже где-то с полгода периодически вылавливаю поддержку 3D на
> > > текущем Сизифе. Так чтобы всегда она была не получается.
> > >
> > > Появляется только если (пере)обновить иксы, или какую-то часть,
> > > причастную к 3D например libdrm. После перезагрузки все слетает.
> > > Где смотреть?
> > >
> > > Подробнее:
> > >
> > > Вот сейчас сделал:
> > >
> > > # apt-get install --reinstall
> > > kernel-modules-drm-std26-up#2006.02.23-alt1.132622.5
...
> > > $ glxinfo
> > > name of display: :0.0
> > > libGL error: open DRM failed (Operation not permitted)
> >
> > Что при этом говорит ls -la /dev/dri/ ?
>
> Ага! Вот что:
>
> $ ls -la /dev/dri/
> итого 0
> drwxr-xr-x 2 root root 60 Мар 6 21:40 .
> drwxr-xr-x 22 root root 7940 Мар 6 21:40 ..
> crw-rw---- 1 root xgrp 226, 0 Мар 6 21:40 card0
...
> > > Section "DRI"
> > > Mode 0666
> > > EndSection
> >
> > А вот эта секция сейчас, похоже, молча игнорируется - по крайней
> > мере, у меня при таком же 0666 фактически для /dev/dri/card0
> > ставятся права 0600, vsu:xgrp. Вероятно, нужно копать в сторону
> > pam_console.
>
> Похоже именно оно. Ибо 0660 root:xgrp
>
> А что (где конкретно) смотреть в pam_console?
Так где же все таки посмотреть?
/etc/security/console.apps/xserver
пусто
в
$ cat /etc/pam.d/xserver
#%PAM-1.0
auth sufficient pam_rootok.so
auth required pam_console.so
account required pam_permit.so
Вообще, система апгрейдилась с 2002 года, так что где-то мог остаться
некий рудимент :)
--
Федор Сорекс, http://www.linuxrsp.ru
http://moscow.lug.ru
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-03-09 20:02 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-03-04 20:18 [sisyphus] Ловля 3D на Xorg 7.0 и Radeon 9200 :) Иногда удачно Fiodor Sorex
2006-03-04 20:43 ` Konstantin A. Lepikhov
2006-03-06 20:14 ` Fiodor Sorex
2006-03-04 20:46 ` Sergey Vlasov
2006-03-06 20:12 ` Fiodor Sorex
2006-03-09 20:02 ` Fiodor Sorex
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git