From: Fiodor Sorex <sorex@softerra.ru> To: sisyphus@lists.altlinux.org Subject: [sisyphus] Ловля 3D на Xorg 7.0 и Radeon 9200 :) Иногда удачно. Date: Sat, 4 Mar 2006 23:18:21 +0300 Message-ID: <200603042318.22507.sorex@softerra.ru> (raw) [-- Attachment #1: Type: text/plain, Size: 1349 bytes --] Добрый день! Уже где-то с полгода периодически вылавливаю поддержку 3D на текущем Сизифе. Так чтобы всегда она была не получается. Появляется только если (пере)обновить иксы, или какую-то часть, причастную к 3D например libdrm. После перезагрузки все слетает. Где смотреть? Подробнее: Вот сейчас сделал: # apt-get install --reinstall kernel-modules-drm-std26-up#2006.02.23-alt1.132622.5 И получил: $ glxinfo name of display: :0.0 display: :0 screen: 0 direct rendering: Yes server glx vendor string: SGI server glx version string: 1.2 Ура! Все игры запускаются как положено. НО! Стоит только перезагрузить компьютер, и получаем: $ glxinfo name of display: :0.0 libGL error: open DRM failed (Operation not permitted) libGL error: reverting to (slow) indirect rendering display: :0 screen: 0 direct rendering: No server glx vendor string: SGI server glx version string: 1.2 Как бы закрепить эффект указанный выше? :) Имеем: kernel-modules-drm-std26-up#2006.02.23-alt1.132622.5 libdrm-2.0-alt3 libmesa-6.4.2-alt1 xorg-x11-extensions-dri-1.0.1-alt12 xorg-x11-dri-ati-6.4.2-alt1 xorg-x11-mesagl-7.0.0-alt9 ядро 2.6.14-std26-up-alt5 xorg.conf в аттаче карта ATI Technologies Inc RV280 [Radeon 9200 SE] В логах ничего значимого. Может что-то ещё посмотреть где-то? -- Федор Сорекс, http://www.linuxrsp.ru http://moscow.lug.ru [-- Attachment #2: xorg.conf --] [-- Type: text/plain, Size: 7117 bytes --] # File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** Section "Files" RgbPath "/usr/share/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. #DontZoom # This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" # Driver "kbd" Driver "kbd" Option "AutoRepeat" "250 30" Option "XkbModel" "pc105" Option "XkbVariant" ",winkeys" ###,,, Option "XkbLayout" "us,ru" ###"us,ru" Option "XkbOptions" "grp:ctrl_shift_toggle" EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" # Option "Device" "/dev/mouse" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "Buttons" "5" Option "ZAxisMapping" "4 5" Option "Resolution" "200" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection Section "Module" # This loads the DBE extension module. Load "dbe" # This loads the Video for Linux module. # Load "v4l" Load "glx" # Load "drm" Load "GLcore" Load "dri" Load "extmod" # Load "fglrx" # Load "glx" # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" #Option "omit xfree86-dga" EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" EndSection Section "DRI" Mode 0666 EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "monitor1" # VendorName "Unknown" # ModelName "Unknown" VendorName "SONY" ModelName "CPD-E230" DisplaySize 328 245 # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 30-85 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 48-170 # This is a set of extended mode timings typically used for laptop, # TV fullscreen mode or DVD fullscreen output. # These are available along with standard mode timings. # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync #ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # 768x576 @ 79 Hz, 50 kHz hsync #ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync #ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 # from asp 7.3 #1024x768 @ 100.0 Hz, 80.2 kHz hsync Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync #800x600 @ 100.0 Hz, 64.0 kHz hsync Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync #640x480 @ 100.0 Hz, 53.0 kHz hsync Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync EndSection # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "Generic VGA" Driver "vga" EndSection Section "Device" Identifier "ATI Radeon" # Identifier "Radeon 9200SE" # Option "no_accel" "no" # Option "no_dri" "no" # Driver "fglrx" VendorName "Unknown" BoardName "Unknown" # Driver "ati" Driver "ati" #-- Driver "ati" # VideoRam 65536 # Clock lines # Uncomment following option if you see a big white block # instead of the cursor! # Option "sw_cursor" Option "AGPMode" "4" Option "DPMS" "on" EndSection # ********************************************************************** # Screen sections # ********************************************************************** Section "Screen" Identifier "screen1" Device "ATI Radeon" Monitor "monitor1" DefaultColorDepth 24 Option "Accel" Subsection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection
next reply other threads:[~2006-03-04 20:18 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2006-03-04 20:18 Fiodor Sorex [this message] 2006-03-04 20:43 ` Konstantin A. Lepikhov 2006-03-06 20:14 ` Fiodor Sorex 2006-03-04 20:46 ` Sergey Vlasov 2006-03-06 20:12 ` Fiodor Sorex 2006-03-09 20:02 ` Fiodor Sorex
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200603042318.22507.sorex@softerra.ru \ --to=sorex@softerra.ru \ --cc=sisyphus@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Sisyphus discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \ sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru public-inbox-index sisyphus Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sisyphus AGPL code for this site: git clone https://public-inbox.org/public-inbox.git