* [sisyphus] Re: [Comm] Конфиг xorg.conf для RADEON 9600 @ 2005-06-21 10:01 ` Slava Dubrovskiy 2005-06-21 10:13 ` Epiphanov Sergei 2005-06-21 10:19 ` Sergey V Turchin 0 siblings, 2 replies; 6+ messages in thread From: Slava Dubrovskiy @ 2005-06-21 10:01 UTC (permalink / raw) To: Sisyphus [-- Attachment #1: Type: text/plain, Size: 2261 bytes --] Alex Yustasov пишет: >>Вот поменял видеокарту с nvidia 440 на RADEON 9600. >> >>В xorg.conf поменял драйвер на fglrx. Но 3D не работает. Тут вроде >>недавно обсуждали эту проблему, но я что-то не могу найти все в сумме. >>Вроде и setgl делал и ничего не помогает. Подскажите, что еще необходимо >>сделать, чтобы карточка заработала на 100%? >> >> > >setgl показывает свои действия. Посмотрите, все ли есть, что он написал. >Мне вчера пришлось руками делать ссылку libGL.so.1, хотя setgl сказал, что >все сделал. >И это лучше в сизиф. > > Что-то setgl вообще ничего не показывает. Совершенно молчит. Ссылка /usr/X11R6/lib/modules/extensions/libglx.so указывает на nvidia. Исправил руками: libglx.so -> /usr/X11R6/lib/fglrx/libGL.so.1 Правильно? И в xorg.conf убрал полный путь к Load "glx" (см. приложенный конфиг) При этом в логе видно: (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so (EE) LoadModule: Module glx does not have a glxModuleData data object. (II) UnloadModule: "glx" (II) Unloading /usr/X11R6/lib/modules/extensions/libglx.so (EE) Failed to load module "glx" (invalid module, 0) # grep WW Xorg.0.log (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found (WW) fglrx(0): board is an unknown third party board, chipset is supported (WW) (2048x1536,Samsung SyncMaster 757NF) mode clock 266.95MHz exceeds DDC maximum 250MHz (WW) fglrx(0): Cannot read colourmap from VGA. Will restore with default (WW) fglrx(0): *********************************************** (WW) fglrx(0): * DRI initialization failed! * (WW) fglrx(0): * (maybe driver kernel module missing or bad) * (WW) fglrx(0): * 2D acceleraton available (MMIO) * (WW) fglrx(0): * no 3D acceleration available * (WW) fglrx(0): ********************************************* * (WW) fglrx(0): Failed to set up write-combining range (0xe8000000,0x8000000) (WW) fglrx(0): Option "AGPMode" is not used В modules.conf прописал (согласно фак) alias char-major-10-134 fglrx Но при просмотре загруженных модулей, fglrx не загружен. Вопрос: Что не правильно и как получить 3D? -- С уважением, Дубровский Вячеслав. [-- Attachment #2: xorg.conf --] [-- Type: text/plain, Size: 3270 bytes --] Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:-1" EndSection Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. #DontZoom # This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail EndSection Section "InputDevice" Identifier "Keyboard1" Driver "kbd" Option "AutoRepeat" "250 30" Option "XkbModel" "pc105" Option "XkbLayout" "us,ru" Option "XkbVariant" ",winkeys" Option "XkbOptions" "grp:ctrl_shift_toggle" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" EndSection Section "Module" Load "dbe" Load "glx" # libglx.a Load "dri" # libdri.a SubSection "extmod" #Option "omit xfree86-dga" EndSubSection Load "type1" Load "freetype" EndSection Section "DRI" Mode 0666 EndSection Section "Monitor" Identifier "Samsung SyncMaster 757NF" VendorName "Samsung" ModelName "Unknown" HorizSync 30-96 VertRefresh 50-160 ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 EndSection Section "Device" Identifier "Generic VGA" Driver "vga" EndSection Section "Device" Identifier "RAREON 9600" VendorName "Unknown" BoardName "MSI" Driver "fglrx" # Clock lines # Uncomment following option if you see a big white block # instead of the cursor! # Option "sw_cursor" Option "AGPMode" "4" Option "DPMS" "on" #Option "NoDDC" EndSection Section "Screen" Identifier "screen1" Device "RAREON 9600" Monitor "Samsung SyncMaster 757NF" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1024x768" "800x600" "640x400" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [sisyphus] Re: [Comm] Конфиг xorg.conf для RADEON 9600 2005-06-21 10:01 ` [sisyphus] Re: [Comm] Конфиг xorg.conf для RADEON 9600 Slava Dubrovskiy @ 2005-06-21 10:13 ` Epiphanov Sergei 2005-06-21 10:19 ` Slava Dubrovskiy 2005-06-21 10:19 ` Sergey V Turchin 1 sibling, 1 reply; 6+ messages in thread From: Epiphanov Sergei @ 2005-06-21 10:13 UTC (permalink / raw) To: slava, ALT Linux Sisyphus discussion list В сообщении от 21 Июнь 2005 14:01 Slava Dubrovskiy написал: > Alex Yustasov пишет: > >>Вот поменял видеокарту с nvidia 440 на RADEON 9600. > >> > >>В xorg.conf поменял драйвер на fglrx. Но 3D не работает. Тут вроде > >>недавно обсуждали эту проблему, но я что-то не могу найти все в сумме. > >>Вроде и setgl делал и ничего не помогает. Подскажите, что еще необходимо > >>сделать, чтобы карточка заработала на 100%? > > > >setgl показывает свои действия. Посмотрите, все ли есть, что он написал. > >Мне вчера пришлось руками делать ссылку libGL.so.1, хотя setgl сказал, > > что все сделал. > >И это лучше в сизиф. > > Что-то setgl вообще ничего не показывает. Совершенно молчит Есть /dev/shm в списке примонтированных ресурсов? Стоят ли fglrx_glx, fglrx-tools и kernel-modules-fglrx-...? Как у Вас в конфигурационном файле написано (что за чем): Module "dri" Module "glx" или Module "glx" Module "dri" У меня во втором случае ускорение не работало. -- С уважением, Епифанов Сергей ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [sisyphus] Re: [Comm] Конфиг xorg.conf для RADEON 9600 2005-06-21 10:13 ` Epiphanov Sergei @ 2005-06-21 10:19 ` Slava Dubrovskiy 0 siblings, 0 replies; 6+ messages in thread From: Slava Dubrovskiy @ 2005-06-21 10:19 UTC (permalink / raw) Cc: ALT Linux Sisyphus discussion list Epiphanov Sergei пишет: >>>>Вот поменял видеокарту с nvidia 440 на RADEON 9600. >>>> >>>>В xorg.conf поменял драйвер на fglrx. Но 3D не работает. Тут вроде >>>>недавно обсуждали эту проблему, но я что-то не могу найти все в сумме. >>>>Вроде и setgl делал и ничего не помогает. Подскажите, что еще необходимо >>>>сделать, чтобы карточка заработала на 100%? >>>> >>>> >>>setgl показывает свои действия. Посмотрите, все ли есть, что он написал. >>>Мне вчера пришлось руками делать ссылку libGL.so.1, хотя setgl сказал, >>>что все сделал. >>>И это лучше в сизиф. >>> >>> >>Что-то setgl вообще ничего не показывает. Совершенно молчит >> >> > >Есть /dev/shm в списке примонтированных ресурсов? Стоят ли fglrx_glx, >fglrx-tools и kernel-modules-fglrx-...? > $ mount | grep tmpfs udev on /dev type tmpfs (rw,size=5m) shmfs on /dev/shm type tmpfs (rw) $sudo rpm -qa | grep fglrx fglrx_glx-8.12.10-alt3 fglrx-tools-8.12.10-alt3 kernel-modules-fglrx-std26-up-1.0.8.12.10-alt1.10 > Как у Вас в конфигурационном файле >написано (что за чем): > >Module "dri" >Module "glx" > >или > >Module "glx" >Module "dri" > >У меня во втором случае ускорение не работало. > И так и так пробовал. Без результата. :-( -- С уважением, Дубровский Вячеслав. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [sisyphus] Re: [Comm] Конфиг xorg.conf для RADEON 9600 2005-06-21 10:01 ` [sisyphus] Re: [Comm] Конфиг xorg.conf для RADEON 9600 Slava Dubrovskiy 2005-06-21 10:13 ` Epiphanov Sergei @ 2005-06-21 10:19 ` Sergey V Turchin 2005-06-21 10:26 ` [sisyphus] Re: [Comm] йНМТХЦ xorg.conf ДКЪ " Slava Dubrovskiy 1 sibling, 1 reply; 6+ messages in thread From: Sergey V Turchin @ 2005-06-21 10:19 UTC (permalink / raw) To: slava, ALT Linux Sisyphus discussion list [-- Attachment #1: Type: text/plain, Size: 590 bytes --] В сообщении от Вторник 21 Июнь 2005 14:01 Slava Dubrovskiy написал(a): [...] > Что-то setgl вообще ничего не показывает. Совершенно молчит. > Ссылка /usr/X11R6/lib/modules/extensions/libglx.so указывает на > nvidia. Исправил руками: libglx.so -> > /usr/X11R6/lib/fglrx/libGL.so.1 Правильно? И в xorg.conf убрал > полный путь к Load "glx" (см. приложенный конфиг) Удалите /usr/X11R6/lib/modules/extensions/libglx.so вообще. Его больше не существует. [...] -- Regards, Sergey, ALT Linux Team, http://www.altlinux.ru http://stinkfoot.org:11371/pks/lookup?op=get&search=0x1C2A3F08 [-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [sisyphus] Re: [Comm] йНМТХЦ xorg.conf ДКЪ RADEON 9600 2005-06-21 10:19 ` Sergey V Turchin @ 2005-06-21 10:26 ` Slava Dubrovskiy 2005-06-21 10:46 ` Epiphanov Sergei 0 siblings, 1 reply; 6+ messages in thread From: Slava Dubrovskiy @ 2005-06-21 10:26 UTC (permalink / raw) To: Sisyphus Sergey V Turchin пишет: >>Что-то setgl вообще ничего не показывает. Совершенно молчит. >>Ссылка /usr/X11R6/lib/modules/extensions/libglx.so указывает на >>nvidia. Исправил руками: libglx.so -> >>/usr/X11R6/lib/fglrx/libGL.so.1 Правильно? И в xorg.conf убрал >>полный путь к Load "glx" (см. приложенный конфиг) >> >> >Удалите /usr/X11R6/lib/modules/extensions/libglx.so вообще. >Его больше не существует. > > А как правильно? На что должна ссылаться ссылка /usr/X11R6/lib/modules/extensions/libglx.a ? Похоже не правильно настроены ссылки и /usr/X11R6/lib/fglrx/libGL.so.1 не используется. Как сделать вручную? -- С уважением, Дубровский Вячеслав. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [sisyphus] Re: [Comm] йНМТХЦ xorg.conf ДКЪ RADEON 9600 2005-06-21 10:26 ` [sisyphus] Re: [Comm] йНМТХЦ xorg.conf ДКЪ " Slava Dubrovskiy @ 2005-06-21 10:46 ` Epiphanov Sergei 0 siblings, 0 replies; 6+ messages in thread From: Epiphanov Sergei @ 2005-06-21 10:46 UTC (permalink / raw) To: slava, ALT Linux Sisyphus discussion list В сообщении от 21 Июнь 2005 14:26 Slava Dubrovskiy написал: > А как правильно? На что должна ссылаться ссылка > /usr/X11R6/lib/modules/extensions/libglx.a ? > Похоже не правильно настроены ссылки и /usr/X11R6/lib/fglrx/libGL.so.1 > не используется. Как сделать вручную? Есть файл /usr/X11R6/lib/drv.d/fglrx. Запустите его и после него выполните ldconfig -- С уважением, Епифанов Сергей ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2005-06-21 10:46 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2005-06-21 10:01 ` [sisyphus] Re: [Comm] Конфиг xorg.conf для RADEON 9600 Slava Dubrovskiy 2005-06-21 10:13 ` Epiphanov Sergei 2005-06-21 10:19 ` Slava Dubrovskiy 2005-06-21 10:19 ` Sergey V Turchin 2005-06-21 10:26 ` [sisyphus] Re: [Comm] йНМТХЦ xorg.conf ДКЪ " Slava Dubrovskiy 2005-06-21 10:46 ` Epiphanov Sergei
ALT Linux Sisyphus discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \ sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru public-inbox-index sisyphus Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sisyphus AGPL code for this site: git clone https://public-inbox.org/public-inbox.git