[sisyphus] Запись CD

[Alex <bee@fbm.msu.ru>]

Здравствуйте!

Не работает ни одна программа для записи сиди. Читает и стирает rw нормально
система - практически сизиф

cdrecord-2.01-alt4a37
xcdroast-0.98alpha15-alt5
cdrdao-1.1.9-alt0.8
cdrtools-control-1.1-alt1.1

ядро 2.6.10-std26-up-alt2

вот, к примеру, лог xcdroast:

Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORD dev= "0,0,0" gracetime=2 fs=4096k -v
driveropts=burnfree  speed=10 -eject -multi -pad -waiti tsize=649s -

cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.5.31
cdrecord: Warning: Linux kernel version is 2.6.10
cdrecord: Enabling compatibility hack!
SCSI buffer size: 64512
Cdrecord-Clone 2.01a37 (i586-alt-linux-gnu) Copyright (C) 1995-2004 JЖrg Schilling
TOC Type: 3 = CD-ROM XA mode 2
Waiting for data on stdin...
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   :
Vendor_info    : 'TEAC    '
Identifikation : 'CD-W552E        '
Revision       : '1.05'
Device seems to be: Generic mmc CD-RW.
Current: 0x000A
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1951488 = 1905 KB
FIFO size      : 4194304 = 4096 KB
cdrecord: Warning: Linux kernel version is 2.6.10
Track 01: data     1 MB         padsize:   30 KB
cdrecord: Enabling compatibility hack!
Total size:        1 MB (00:08.88) = 666 sectors
cdrecord: Warning: Linux kernel version is 2.6.10
Lout start:        1 MB (00:10/66) = 666 sectors
cdrecord: Enabling compatibility hack!
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in:  -11077 (97:34/23)
ATIP start of lead out: 359849 (79:59/74)
1T speed low:  4 1T speed high: 10
2T speed low:  2 2T speed high: 10
power mult factor: 2 6
recommended erase/write power: 5
A1 values: 24 2C DC
A2 values: 14 A4 4A
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 359183
Starting to write CD/DVD at speed 10 in real TAO mode for multi session.
Waiting for reader process to fill input buffer ...
input buffer ready.
BURN-Free is ON.
Performing OPC...
Starting new track at sector: 0
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru
0x0 Sense flags: Blk 0 (valid) 
cmd finished after 29.995s timeout 40s
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.

write track data: error after 0 bytes
Writing  time:   47.970s
Average write speed   0.2x.
Fixating...
Fixating time:   34.878s
BURN-Free was never needed.
cdrecord: fifo had 21 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.