[sisyphus] ATI Radeon 9600 :(

ALT Linux Sisyphus discussions
 help / color / mirror / Atom feed

* [sisyphus] ATI Radeon 9600 :(
@ 2003-11-17 17:41 Vitaly Lipatov
  2003-11-17 18:03 ` Korshunov Ilya
  2003-11-17 18:06 ` Sergey Vlasov
  0 siblings, 2 replies; 7+ messages in thread
From: Vitaly Lipatov @ 2003-11-17 17:41 UTC (permalink / raw)
  To: sisyphus

Видеокарта ATI Radeon 9600
Сизиф последний. Не работает 3D.
Ну, драйвер radeon в XFree вообще о такой карте не знает, а fglrx
вот что выдаёт:
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 3.2.8
(II) fglrx(0):     Date: Sep 21 2003
(II) fglrx(0):     Desc: ATI Fire GL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.4.22-std-up-alt8
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xd5020000
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENOMEM"
(EE) fglrx(0): cannot init AGP

Вывод lspci -n:
02:00.0 Class 0300: 1002:4150
02:00.1 Class 0380: 1002:4170
Вывод lspci:
02:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4150
02:00.1 Display controller: ATI Technologies Inc: Unknown device 4170

Работает, но без 3D.
Вдобавок если переключаешься в текстовый режим и обратно, сбивается палитра,
вместо чёрного появляются различные радужные цвета. Лечится перезапуском иксов или запуском reflect,
как связано, не знаю.

Что же делать-то?

-- 
Lav
Виталий Липатов
Санкт-Петербург
GNU! ALT Linux Team! LaTeX! LyX!

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [sisyphus] ATI Radeon 9600 :(
  2003-11-17 17:41 [sisyphus] ATI Radeon 9600 :( Vitaly Lipatov
@ 2003-11-17 18:03 ` Korshunov Ilya
  2003-11-17 23:31   ` Vitaly Lipatov
  2003-11-17 18:06 ` Sergey Vlasov
  1 sibling, 1 reply; 7+ messages in thread
From: Korshunov Ilya @ 2003-11-17 18:03 UTC (permalink / raw)
  To: sisyphus

В сообщении от Понедельник 17 Ноябрь 2003 20:41 Vitaly Lipatov написал(a):
> Видеокарта ATI Radeon 9600
> Сизиф последний. Не работает 3D.
> Ну, драйвер radeon в XFree вообще о такой карте не знает, а fglrx
> вот что выдаёт:

Запускалась нормально ? Или были пляски с бубном ? Свою никак не можем 
запустить в приницпе, про 3D речи пока нет :D

-- 
Best Regards
Korshunov Ilya



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [sisyphus] ATI Radeon 9600 :(
  2003-11-17 18:03 ` Korshunov Ilya
@ 2003-11-17 23:31   ` Vitaly Lipatov
  0 siblings, 0 replies; 7+ messages in thread
From: Vitaly Lipatov @ 2003-11-17 23:31 UTC (permalink / raw)
  To: sisyphus

On 17 Ноябрь 2003 21:03, Korshunov Ilya wrote:
> В сообщении от Понедельник 17 Ноябрь 2003 20:41 Vitaly Lipatov 
написал(a):
> > Видеокарта ATI Radeon 9600
> > Сизиф последний. Не работает 3D.
> > Ну, драйвер radeon в XFree вообще о такой карте не знает, а
> > fglrx вот что выдаёт:
>
> Запускалась нормально ? Или были пляски с бубном ? Свою никак
без проблем, но только с драйвером от ATI (fglrx)
> не можем запустить в приницпе, про 3D речи пока нет :D

-- 
Виталий Липатов, Санкт-Петербург, www.etersoft.ru


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [sisyphus] ATI Radeon 9600 :(
  2003-11-17 17:41 [sisyphus] ATI Radeon 9600 :( Vitaly Lipatov
  2003-11-17 18:03 ` Korshunov Ilya
@ 2003-11-17 18:06 ` Sergey Vlasov
  2003-11-17 23:34   ` Vitaly Lipatov
  1 sibling, 1 reply; 7+ messages in thread
From: Sergey Vlasov @ 2003-11-17 18:06 UTC (permalink / raw)
  To: sisyphus

[-- Attachment #1: Type: text/plain, Size: 1785 bytes --]

On Mon, Nov 17, 2003 at 08:41:15PM +0300, Vitaly Lipatov wrote:
> Видеокарта ATI Radeon 9600
> Сизиф последний. Не работает 3D.
> Ну, драйвер radeon в XFree вообще о такой карте не знает, а fglrx
> вот что выдаёт:
> (II) fglrx(0): DRIScreenInit done
> (II) fglrx(0): Kernel Module Version Information:
> (II) fglrx(0):     Name: fglrx
> (II) fglrx(0):     Version: 3.2.8
> (II) fglrx(0):     Date: Sep 21 2003
> (II) fglrx(0):     Desc: ATI Fire GL DRM kernel module
> (II) fglrx(0): Kernel Module version matches driver.
> (II) fglrx(0): Kernel Module Build Time Information:
> (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.4.22-std-up-alt8
> (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
> (II) fglrx(0):     Build-Kernel __SMP__:            no
> (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
> (II) fglrx(0): [drm] register handle = 0xd5020000
> (EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENOMEM"
> (EE) fglrx(0): cannot init AGP

Тут, возможно, проблема не в видеокарте, а в чипсете материнской платы
(возможно, для него нет поддержки AGP, или она сделана с ошибками - такое
уже наблюдалось).  Покажите полный вывод lspci -vvx.

> Вывод lspci -n:
> 02:00.0 Class 0300: 1002:4150
> 02:00.1 Class 0380: 1002:4170
> Вывод lspci:
> 02:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4150
> 02:00.1 Display controller: ATI Technologies Inc: Unknown device 4170
> 
> Работает, но без 3D.
> Вдобавок если переключаешься в текстовый режим и обратно, сбивается палитра,
> вместо чёрного появляются различные радужные цвета. Лечится перезапуском иксов или запуском reflect,
> как связано, не знаю.

Это в fglrx уже давно :(

На самом деле вроде бы для восстановления достаточно запустить любую
программу, использующую OpenGL.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [sisyphus] ATI Radeon 9600 :(
  2003-11-17 18:06 ` Sergey Vlasov
@ 2003-11-17 23:34   ` Vitaly Lipatov
  2003-11-18  8:30     ` Sergey Vlasov
  2003-11-18 17:06     ` Sergey Vlasov
  0 siblings, 2 replies; 7+ messages in thread
From: Vitaly Lipatov @ 2003-11-17 23:34 UTC (permalink / raw)
  To: sisyphus

[-- Attachment #1: Type: text/plain, Size: 1822 bytes --]

On 17 Ноябрь 2003 21:06, Sergey Vlasov wrote:
> On Mon, Nov 17, 2003 at 08:41:15PM +0300, Vitaly Lipatov wrote:
> > Видеокарта ATI Radeon 9600
> > Сизиф последний. Не работает 3D.
> > Ну, драйвер radeon в XFree вообще о такой карте не знает, а
> > fglrx вот что выдаёт:
> > (II) fglrx(0): DRIScreenInit done
> > (II) fglrx(0): Kernel Module Version Information:
> > (II) fglrx(0):     Name: fglrx
> > (II) fglrx(0):     Version: 3.2.8
> > (II) fglrx(0):     Date: Sep 21 2003
> > (II) fglrx(0):     Desc: ATI Fire GL DRM kernel module
> > (II) fglrx(0): Kernel Module version matches driver.
> > (II) fglrx(0): Kernel Module Build Time Information:
> > (II) fglrx(0):     Build-Kernel UTS_RELEASE:       
> > 2.4.22-std-up-alt8 (II) fglrx(0):     Build-Kernel
> > MODVERSIONS:        yes (II) fglrx(0):     Build-Kernel
> > __SMP__:            no (II) fglrx(0):     Build-Kernel
> > PAGE_SIZE:          0x1000 (II) fglrx(0): [drm] register
> > handle = 0xd5020000
> > (EE) fglrx(0): [agp] unable to acquire AGP, error
> > "xf86_ENOMEM" (EE) fglrx(0): cannot init AGP
>
> Тут, возможно, проблема не в видеокарте, а в чипсете
> материнской платы (возможно, для него нет поддержки AGP, или
> она сделана с ошибками - такое уже наблюдалось).  Покажите
> полный вывод lspci -vvx.
ну зачем же вам такой длинный вывод? :) Приложен
Да, конечно же забыл сказать, что у меня nVidia nForce2

> > > > Вдобавок если переключаешься в текстовый режим и обратно,
> > сбивается палитра, вместо чёрного появляются различные
> > радужные цвета. Лечится перезапуском иксов или запуском
> > reflect, как связано, не знаю.
>
> Это в fglrx уже давно :(
>
> На самом деле вроде бы для восстановления достаточно запустить
> любую программу, использующую OpenGL.
Нет, вот gears не помогает :)

-- 
Виталий Липатов, Санкт-Петербург, www.etersoft.ru

[-- Attachment #2: lspci.out --]
[-- Type: text/plain, Size: 16626 bytes --]

00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
	Capabilities: <available only to root>
00: de 10 e0 01 06 00 b0 00 c1 00 00 06 00 00 80 00
10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00

00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
	Subsystem: Unknown device 1695:1000
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: de 10 eb 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 00 10
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00

00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
	Subsystem: Unknown device 1695:1000
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: de 10 ee 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 00 10
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00

00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
	Subsystem: Unknown device 1695:1000
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: de 10 ed 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 00 10
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
	Subsystem: Unknown device 1695:1000
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: de 10 ec 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 00 10
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00

00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
	Subsystem: Unknown device 1695:1000
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: de 10 ef 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 00 10
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00

00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3)
	Subsystem: Unknown device 1695:1000
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: <available only to root>
00: de 10 60 00 0f 00 b0 00 a3 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 00 10
30: 00 00 00 00 48 00 00 00 00 00 00 00 00 00 00 00

00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
	Subsystem: Unknown device 1695:1000
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 0
	Region 0: I/O ports at e800 [size=32]
	Capabilities: <available only to root>
00: de 10 64 00 01 00 b0 00 a2 00 05 0c 00 00 80 00
10: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 00 10
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 03 01

00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI])
	Subsystem: Unknown device 1695:1000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at d7001000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <available only to root>
00: de 10 67 00 07 00 b0 00 a3 10 03 0c 00 00 80 00
10: 00 10 00 d7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 00 10
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01

00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI])
	Subsystem: Unknown device 1695:1000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at d7002000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <available only to root>
00: de 10 67 00 07 00 b0 00 a3 10 03 0c 00 00 80 00
10: 00 20 00 d7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 00 10
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 03 01

00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 20 [EHCI])
	Subsystem: Unknown device 1695:1000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin C routed to IRQ 5
	Region 0: Memory at d7003000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <available only to root>
00: de 10 68 00 06 00 b0 00 a3 20 03 0c 00 00 80 00
10: 00 30 00 d7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 00 10
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 03 03 01

00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
	Subsystem: Unknown device 1695:1000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at d7004000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at ec00 [size=8]
	Capabilities: <available only to root>
00: de 10 66 00 07 00 b0 00 a1 00 00 02 00 00 00 00
10: 00 40 00 d7 01 ec 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 00 10
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 14

00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000a000-0000cfff
	Memory behind bridge: d6000000-d6ffffff
	Prefetchable memory behind bridge: d4000000-d4ffffff
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00: de 10 6c 00 07 01 a0 00 a3 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 a0 c0 80 22
20: 00 d6 f0 d6 00 d4 f0 d4 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00

00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
	Subsystem: Unknown device 1695:1000
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Region 4: I/O ports at f000 [size=16]
	Capabilities: <available only to root>
00: de 10 65 00 05 00 b0 00 a2 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 95 16 00 10
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01

00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: d5000000-d5ffffff
	Prefetchable memory behind bridge: b0000000-cfffffff
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00: de 10 e8 01 07 01 20 02 c1 00 04 06 00 20 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 d0 d0 20 22
20: 00 d5 f0 d5 00 b0 f0 cf 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 00

01:06.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
	Subsystem: Creative Labs CT4832 SBLive! Value
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at a000 [size=32]
	Capabilities: <available only to root>
00: 02 11 02 00 05 00 90 02 08 00 01 04 00 20 80 00
10: 01 a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 27 80
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 02 14

01:06.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 08)
	Subsystem: Creative Labs Gameport Joystick
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Region 0: I/O ports at a400 [size=8]
	Capabilities: <available only to root>
00: 02 11 02 70 05 00 90 02 08 00 80 09 00 20 80 00
10: 01 a4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 20 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00

01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
	Subsystem: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at a800 [size=32]
00: ec 10 29 80 03 00 00 02 00 00 00 02 00 00 00 00
10: 01 a8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 29 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00

01:09.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
	Subsystem: Adaptec AHA-2904/Integrated AIC-7850
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (1000ns min, 1000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at ac00 [disabled] [size=256]
	Region 1: Memory at d6080000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <available only to root>
00: 04 90 78 50 06 00 90 02 03 00 00 01 08 20 00 00
10: 01 ac 00 00 00 00 08 d6 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 04 90 50 78
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 04 04

01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
	Subsystem: Avermedia Technologies Inc AVerTV WDM Video Capture
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (4000ns min, 10000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at d4000000 (32-bit, prefetchable) [size=4K]
	Capabilities: <available only to root>
00: 9e 10 6e 03 06 00 90 02 11 00 00 04 00 20 80 00
10: 08 00 00 d4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 61 14 04 00
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 10 28

01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
	Subsystem: Avermedia Technologies Inc AVerTV WDM Audio Capture
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (1000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at d4001000 (32-bit, prefetchable) [size=4K]
	Capabilities: <available only to root>
00: 9e 10 78 08 06 00 90 02 11 00 80 04 00 20 80 00
10: 08 10 00 d4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 61 14 04 00
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 04 ff

01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
	Subsystem: Unknown device 1695:9001
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at b000 [size=256]
	Region 1: Memory at d6082000 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: <available only to root>
00: ec 10 39 81 07 00 90 02 10 00 00 02 00 20 00 00
10: 01 b0 00 00 00 20 08 d6 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 01 90
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 20 40

01:0d.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 61) (prog-if 10 [OHCI])
	Subsystem: Unknown device 1695:9015
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (3000ns min, 6000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d6083000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <available only to root>
00: c1 11 11 58 06 00 90 02 61 10 00 0c 08 20 00 00
10: 00 30 08 d6 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 95 16 15 90
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 0c 18

02:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4150 (prog-if 00 [VGA])
	Subsystem: PC Partner Limited: Unknown device 7c20
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 255 (2000ns min), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at b0000000 (32-bit, prefetchable) [size=256M]
	Region 1: I/O ports at d000 [size=256]
	Region 2: Memory at d5020000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: <available only to root>
00: 02 10 50 41 07 00 b0 02 00 00 00 03 08 ff 80 00
10: 08 00 00 b0 01 d0 00 00 00 00 02 d5 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 20 7c
30: 00 00 00 00 58 00 00 00 00 00 00 00 0b 01 08 00

02:00.1 Display controller: ATI Technologies Inc: Unknown device 4170
	Subsystem: PC Partner Limited: Unknown device 7c21
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Region 0: Memory at c0000000 (32-bit, prefetchable) [disabled] [size=256M]
	Region 1: Memory at d5030000 (32-bit, non-prefetchable) [disabled] [size=64K]
	Capabilities: <available only to root>
00: 02 10 70 41 00 00 b0 02 00 00 80 03 08 20 00 00
10: 08 00 00 c0 00 00 03 d5 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 21 7c
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [sisyphus] ATI Radeon 9600 :(
  2003-11-17 23:34   ` Vitaly Lipatov
@ 2003-11-18  8:30     ` Sergey Vlasov
  2003-11-18 17:06     ` Sergey Vlasov
  1 sibling, 0 replies; 7+ messages in thread
From: Sergey Vlasov @ 2003-11-18  8:30 UTC (permalink / raw)
  To: sisyphus

[-- Attachment #1: Type: text/plain, Size: 2127 bytes --]

On Tue, Nov 18, 2003 at 02:34:29AM +0300, Vitaly Lipatov wrote:
> On 17 Ноябрь 2003 21:06, Sergey Vlasov wrote:
> > On Mon, Nov 17, 2003 at 08:41:15PM +0300, Vitaly Lipatov wrote:
> > > Видеокарта ATI Radeon 9600
> > > Сизиф последний. Не работает 3D.
> > > Ну, драйвер radeon в XFree вообще о такой карте не знает, а
> > > fglrx вот что выдаёт:
> > > (II) fglrx(0): DRIScreenInit done
> > > (II) fglrx(0): Kernel Module Version Information:
> > > (II) fglrx(0):     Name: fglrx
> > > (II) fglrx(0):     Version: 3.2.8
> > > (II) fglrx(0):     Date: Sep 21 2003
> > > (II) fglrx(0):     Desc: ATI Fire GL DRM kernel module
> > > (II) fglrx(0): Kernel Module version matches driver.
> > > (II) fglrx(0): Kernel Module Build Time Information:
> > > (II) fglrx(0):     Build-Kernel UTS_RELEASE:       
> > > 2.4.22-std-up-alt8 (II) fglrx(0):     Build-Kernel
> > > MODVERSIONS:        yes (II) fglrx(0):     Build-Kernel
> > > __SMP__:            no (II) fglrx(0):     Build-Kernel
> > > PAGE_SIZE:          0x1000 (II) fglrx(0): [drm] register
> > > handle = 0xd5020000
> > > (EE) fglrx(0): [agp] unable to acquire AGP, error
> > > "xf86_ENOMEM" (EE) fglrx(0): cannot init AGP
> >
> > Тут, возможно, проблема не в видеокарте, а в чипсете
> > материнской платы (возможно, для него нет поддержки AGP, или
> > она сделана с ошибками - такое уже наблюдалось).  Покажите
> > полный вывод lspci -vvx.
> ну зачем же вам такой длинный вывод? :) Приложен

Да, действительно длинный (зачем же столько PCI-устройств из одного
чипа делать :) ).  Хотя в случае борьбы с i875P именно весь вывод и
понадобился.

> Да, конечно же забыл сказать, что у меня nVidia nForce2

Неудивительно, что оно с видеокартой от ATI работать не хочет :)

Хотя вроде бы поддержка этого чипсета в fglrx есть (там встроенный
кусок из agpgart), но, похоже, опять сделана криво.  Можно попробовать
это поправить - похоже, там та же ошибка, что и для VIA KT400 в режиме
AGP 2.0.

А пока попробуйте написать в XF86Config-4 в секцию "Device":

    Option "UseInternalAGPGART" "no"

При этом будет использоваться поддержка AGP из модуля agpgart, а не
встроенная в fglrx.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [sisyphus] ATI Radeon 9600 :(
  2003-11-17 23:34   ` Vitaly Lipatov
  2003-11-18  8:30     ` Sergey Vlasov
@ 2003-11-18 17:06     ` Sergey Vlasov
  1 sibling, 0 replies; 7+ messages in thread
From: Sergey Vlasov @ 2003-11-18 17:06 UTC (permalink / raw)
  To: sisyphus

[-- Attachment #1: Type: text/plain, Size: 1760 bytes --]

On Tue, Nov 18, 2003 at 02:34:29AM +0300, Vitaly Lipatov wrote:
> On 17 Ноябрь 2003 21:06, Sergey Vlasov wrote:
> > On Mon, Nov 17, 2003 at 08:41:15PM +0300, Vitaly Lipatov wrote:
> > > Видеокарта ATI Radeon 9600
> > > Сизиф последний. Не работает 3D.
> > > Ну, драйвер radeon в XFree вообще о такой карте не знает, а
> > > fglrx вот что выдаёт:
> > > (II) fglrx(0): DRIScreenInit done
> > > (II) fglrx(0): Kernel Module Version Information:
> > > (II) fglrx(0):     Name: fglrx
> > > (II) fglrx(0):     Version: 3.2.8
> > > (II) fglrx(0):     Date: Sep 21 2003
> > > (II) fglrx(0):     Desc: ATI Fire GL DRM kernel module
> > > (II) fglrx(0): Kernel Module version matches driver.
> > > (II) fglrx(0): Kernel Module Build Time Information:
> > > (II) fglrx(0):     Build-Kernel UTS_RELEASE:       
> > > 2.4.22-std-up-alt8 (II) fglrx(0):     Build-Kernel
> > > MODVERSIONS:        yes (II) fglrx(0):     Build-Kernel
> > > __SMP__:            no (II) fglrx(0):     Build-Kernel
> > > PAGE_SIZE:          0x1000 (II) fglrx(0): [drm] register
> > > handle = 0xd5020000
> > > (EE) fglrx(0): [agp] unable to acquire AGP, error
> > > "xf86_ENOMEM" (EE) fglrx(0): cannot init AGP
> >
> > Тут, возможно, проблема не в видеокарте, а в чипсете
> > материнской платы (возможно, для него нет поддержки AGP, или
> > она сделана с ошибками - такое уже наблюдалось).  Покажите
> > полный вывод lspci -vvx.
> ну зачем же вам такой длинный вывод? :) Приложен
> Да, конечно же забыл сказать, что у меня nVidia nForce2

К очередному идущему в Сизиф ядру 2.4.22-std-*-alt10 будет собран модуль
fglrx с патчем, предположительно исправляющим работу с nForce.  Для
ускорения тестирования могу лично кинуть сборку для alt8.

PS: Виталий, адрес на etersoft.ru недоступен - NXDOMAIN.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2003-11-18 17:06 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-11-17 17:41 [sisyphus] ATI Radeon 9600 :( Vitaly Lipatov
2003-11-17 18:03 ` Korshunov Ilya
2003-11-17 23:31   ` Vitaly Lipatov
2003-11-17 18:06 ` Sergey Vlasov
2003-11-17 23:34   ` Vitaly Lipatov
2003-11-18  8:30     ` Sergey Vlasov
2003-11-18 17:06     ` Sergey Vlasov

ALT Linux Sisyphus discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
		sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
	public-inbox-index sisyphus

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.sisyphus


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git