From: Alex <bee@fbm.msu.ru> To: sisyphus@altlinux.ru Subject: Re: [sisyphus] 2.4.22alt8 и compact Date: Tue, 11 Nov 2003 12:12:16 +0300 Message-ID: <20031111121216.6e404039.bee@fbm.msu.ru> (raw) In-Reply-To: <20031111081930.GA5913@master.mivlgu.local> [-- Attachment #1: Type: text/plain, Size: 983 bytes --] On Tue, 11 Nov 2003 11:19:30 +0300 Sergey Vlasov <vsu@altlinux.ru> wrote: > > Просто у меня несколько компов с intel S845WD-1E. На райд там ничто не встает сразу. > > А в этом ядре как раз модули промайса появились. И они работают!!!! > > А какой конкретно модуль, и какое устройство (lspci -vv)? Да это старая довольно мать. Там FastTrak100 PDC20267 только с модулем pdcraid он не работает. Вернее работает, но не на всех матерях. Видимо дело в прошивках.Которые машины давно покупали - там работает. В более поздних нет. Нормально работает с FastTrak.o с www.promise.com (4_ftsrc-b25.tgz я собирал). Но его не подпихнешь инсталлятору! Вот тока появился в альт > Модули вроде бы были и для alt7 - в alt8 в список поддерживаемых устройств > sata_promise кое-что добавилось. я не видел! Не качал альт7. Только сегодня заметил на www.altlinux.ru модуль promise для ядра в анонсе новых пакетов. там написано что начальный билд и я сделал вывод что тока-тока собрали. Алекс [-- Attachment #2: lspci-vv.txt --] [-- Type: text/plain, Size: 6857 bytes --] 00:00.0 Class 0600: 8086:1a30 (rev 11) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] Capabilities: [e4] #09 [a104] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 00:01.0 Class 0604: 8086:1a31 (rev 11) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: fc800000-fc8fffff Prefetchable memory behind bridge: dc500000-dc5fffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00:1e.0 Class 0604: 8086:244e (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fc900000-feafffff Prefetchable memory behind bridge: dc600000-dc6fffff BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- 00:1f.0 Class 0601: 8086:2440 (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 Class 0101: 8086:244b (rev 05) (prog-if 80 [Master]) Subsystem: 8086:5744 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 4: I/O ports at ffa0 [size=16] 00:1f.2 Class 0c03: 8086:2442 (rev 05) Subsystem: 8086:5744 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at ef40 [size=32] 00:1f.3 Class 0c05: 8086:2443 (rev 05) Subsystem: 8086:5744 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at efa0 [size=16] 00:1f.4 Class 0c03: 8086:2444 (rev 05) Subsystem: 8086:5744 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 10 Region 4: I/O ports at ef80 [size=32] 02:0c.0 Class 0200: 8086:1229 (rev 0d) Subsystem: 8086:301a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at de80 [size=64] Region 2: Memory at fea80000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 02:0d.0 Class 0200: 8086:1229 (rev 0d) Subsystem: 8086:301a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at feafd000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at dd80 [size=64] Region 2: Memory at fea40000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 02:0e.0 Class 0104: 105a:4d30 (rev 02) Subsystem: 8086:5744 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at dff0 [size=8] Region 1: I/O ports at dfe4 [size=4] Region 2: I/O ports at dfa8 [size=8] Region 3: I/O ports at dfe0 [size=4] Region 4: I/O ports at df00 [size=64] Region 5: Memory at feaa0000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [58] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:0f.0 Class 0300: 1002:4752 (rev 27) Subsystem: 8086:5744 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at d800 [size=256] Region 2: Memory at feaff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
prev parent reply other threads:[~2003-11-11 9:12 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2003-11-11 8:11 Alex 2003-11-11 8:19 ` Sergey Vlasov 2003-11-11 9:12 ` Alex [this message]
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20031111121216.6e404039.bee@fbm.msu.ru \ --to=bee@fbm.msu.ru \ --cc=sisyphus@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Sisyphus discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \ sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru public-inbox-index sisyphus Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sisyphus AGPL code for this site: git clone https://public-inbox.org/public-inbox.git