ALT Linux Sisyphus discussions
 help / color / mirror / Atom feed
From: Nick Fedchik <nick@fedchik.org.ua>
To: sisyphus@altlinux.ru
Subject: Re: [sisyphus] installer-20030910.iso
Date: Thu, 11 Sep 2003 17:48:46 +0300
Message-ID: <200309111748.46094.nick@fedchik.org.ua> (raw)
In-Reply-To: <200309111733.07556.nick@fedchik.org.ua>

[-- Attachment #1: Type: text/plain, Size: 631 bytes --]

On Thursday 11 September 2003 17:33, Nick Fedchik wrote:
> Ща попробую.
Попробовал. Врубил overburning и начал выжигать...
Хорошо всё же что RW... ;)
В общем - абламайскис... :(
...
99%: 215 of 217 MB written (fifo 100%) [buf 100%] 4.1x.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
...
/usr/bin/cdrecord: fifo had 3596 puts and 3552 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 3514 times full, min fill was 84%.
Burn failed.
:(
Ну чуть-чуть не хватило - пару метров бы поменьше... :)
Детальки в аттачнутом логе, если кому интересно...

-- 
Best Regareds, Nick Fedchik
http://www.fedchik.org.ua/

[-- Attachment #2: cdrw-installer.log --]
[-- Type: text/x-log, Size: 3453 bytes --]

Directory '/var/tmp/' has 10869 MB available.
Checking recording device.
scsidev: '00,00,00'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Driver options:
burnfree	Prepare writer to use BURN-Free technology
noburnfree	Disable using BURN-Free technology
Cdrecord 2.0 (i586-alt-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'help'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : '_NEC    '
Identifikation : 'CD-RW NR-9300A  '
Revision       : '2.12'
Device seems to be: Generic mmc CD-RW.
Driver for the current drive is present and valid.
Starting burn process.
scsidev: '00,00,00'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Cdrecord 2.0 (i586-alt-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : '_NEC    '
Identifikation : 'CD-RW NR-9300A  '
Revision       : '2.12'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1226752 = 1198 KB
FIFO size      : 4194304 = 4096 KB
/usr/bin/cdrecord: WARNING: Data may not fit on current disk.
/usr/bin/cdrecord: Notice: Overburning active. Trying to write more than the official disk capacity.
Track 01: data   217 MB
Total size:      250 MB (24:46.10) = 111458 sectors
Lout start:      250 MB (24:48/08) = 111458 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in:  -11635 (97:26/65)
ATIP start of lead out: 110100 (24:30/00)
1T speed low:  4 1T speed high: 10
2T speed low:  4 2T speed high:  0 (reserved val  6)
power mult factor: 1 5
recommended erase/write power: 3
A1 values: 24 1A BC
A2 values: 26 B2 26
Disk type:    Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 110100 Blocks current: 110100 Blocks remaining: -1358
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Burning Track Track 01, percent done:
99%: 215 of 217 MB written (fifo 100%) [buf 100%] 4.1x.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 01 AE 01 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s
write track data: error after 225445888 bytes
Writing  time:  376.360s
Average write speed   4.0x.
Min drive buffer fill was 100%
Fixating...
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Fixating time:   62.925s
/usr/bin/cdrecord: fifo had 3596 puts and 3552 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 3514 times full, min fill was 84%.
Burn failed.
Failed to create Data CD.


CD Bake Oven. Чтв Сен 11 2003.

  reply	other threads:[~2003-09-11 14:48 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-09-11 14:19 Nick Fedchik
2003-09-11 14:21 ` Leonid B. Sysoletin
2003-09-11 14:32   ` Anton Farygin
2003-09-11 14:38     ` Nick Fedchik
2003-09-12  0:46       ` nikodim
2003-09-12  2:06       ` Re[2]: " Evgeny Yugov
2003-09-12  7:38         ` Nick Fedchik
2003-09-12 14:58           ` Anton Farygin
2003-09-15  3:06             ` Alexander Kirey
2003-09-11 14:33   ` Nick Fedchik
2003-09-11 14:48     ` Nick Fedchik [this message]
2003-09-11 14:53       ` Led
2003-09-11 14:57         ` [sisyphus] installer-20030910.iso Alexey Tourbin
2003-09-11 15:03           ` Nick Fedchik
2003-09-11 15:04           ` Led

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200309111748.46094.nick@fedchik.org.ua \
    --to=nick@fedchik.org.ua \
    --cc=sisyphus@altlinux.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

ALT Linux Sisyphus discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
		sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
	public-inbox-index sisyphus

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.sisyphus


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git