* [sisyphus] Спасайте! "побаловался" с Auto RAID recover...
@ 2003-11-27 13:17 Evgeny Yugov
2003-11-27 13:41 ` [sisyphus] " Michael Shigorin
2003-11-27 14:58 ` [sisyphus] " Epiphanov Sergei
0 siblings, 2 replies; 8+ messages in thread
From: Evgeny Yugov @ 2003-11-27 13:17 UTC (permalink / raw)
To: All
[-- Attachment #1: Type: text/plain, Size: 600 bytes --]
Здравствуйте All,
И "запортил" винт с оригиналом...
проблема в том что не перемонтируется корневой раздел,
"mount -o remount,rw" не помогает, пишет:
[root@bug0 /]# mount -o remount,rw /
mount: / not mounted already, or bad option
Система работает но / не монтируется в RW отсюда много ругани... :o(
в аттаче dmesg.
Может кто натолкнет на мысли?
Срочно нужно, если что ICQUIN 3251825. :o(
--
With Best regards,
Evgeny Yugov,
MTS, programmer of Advanced Technologies Departament.
Registered Linux User #316667
mailto:yugov@scs-900.ru
Origin: Утром пить хочется от водки, а голова болит от скалки.
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 15677 bytes --]
bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2799.3602 MHz.
..... host bus clock speed is 133.3027 MHz.
cpu: 0, clocks: 1333027, slice: 666513
CPU0<T0:1333024,T1:666496,D:15,S:666513,C:1333027>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20031002
PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=6
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI-0888: *** Info: There are no GPE blocks defined in the FADT
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:0f.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI1] (00:01)
PCI: Probing PCI hardware (bus 01)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Root Bridge [PCI2] (00:04)
PCI: Probing PCI hardware (bus 04)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 7 *10 11 15)
ACPI: PCI Interrupt Link [IN16] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN17] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN18] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN19] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN20] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN21] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 *7 10 11 15)
ACPI: PCI Interrupt Link [IN23] (IRQs 4 *5 7 10 11 15)
ACPI: PCI Interrupt Link [IN24] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN25] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN26] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN27] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN28] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN29] (IRQs 4 5 7 10 11 *15)
ACPI: PCI Interrupt Link [IN30] (IRQs 4 5 7 10 *11 15)
ACPI: PCI Interrupt Link [IN31] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN32] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN33] (IRQs 4 5 7 10 11 15)
ACPI: PCI Interrupt Link [IN34] (IRQs 4 5 7 10 11 15)
PCI: Probing PCI hardware
IOAPIC[1]: Set PCI routing entry (3-7 -> 0xa9 -> IRQ 23 Mode:1 Active:1)
00:00:05[A] -> 3-7 -> IRQ 23
IOAPIC[1]: Set PCI routing entry (3-6 -> 0xb1 -> IRQ 22 Mode:1 Active:1)
00:00:05[B] -> 3-6 -> IRQ 22
ACPI: Unable to set IRQ for PCI Interrupt Link [IUSB] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off
IOAPIC[1]: Set PCI routing entry (3-15 -> 0xb9 -> IRQ 31 Mode:1 Active:1)
00:00:04[A] -> 3-15 -> IRQ 31
IOAPIC[1]: Set PCI routing entry (3-14 -> 0xc1 -> IRQ 30 Mode:1 Active:1)
00:01:02[A] -> 3-14 -> IRQ 30
IOAPIC[1]: Set PCI routing entry (3-12 -> 0xc9 -> IRQ 28 Mode:1 Active:1)
00:01:01[A] -> 3-12 -> IRQ 28
IOAPIC[1]: Set PCI routing entry (3-11 -> 0xd1 -> IRQ 27 Mode:1 Active:1)
00:01:01[B] -> 3-11 -> IRQ 27
Pin 3-12 already programmed
Pin 3-11 already programmed
IOAPIC[1]: Set PCI routing entry (3-13 -> 0xd9 -> IRQ 29 Mode:1 Active:1)
00:04:02[A] -> 3-13 -> IRQ 29
IOAPIC[1]: Set PCI routing entry (3-10 -> 0xe1 -> IRQ 26 Mode:1 Active:1)
00:04:01[A] -> 3-10 -> IRQ 26
IOAPIC[1]: Set PCI routing entry (3-9 -> 0xe9 -> IRQ 25 Mode:1 Active:1)
00:04:01[B] -> 3-9 -> IRQ 25
Pin 3-10 already programmed
Pin 3-9 already programmed
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 16.
number of IO-APIC #3 registers: 16.
number of IO-APIC #4 registers: 16.
number of IO-APIC #5 registers: 16.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 03000000
....... : arbitration: 03
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 001 01 1 1 0 1 0 1 1 B1
07 001 01 1 1 0 1 0 1 1 A9
08 000 00 1 0 0 0 0 0 0 00
09 001 01 1 1 0 1 0 1 1 E9
0a 001 01 1 1 0 1 0 1 1 E1
0b 001 01 1 1 0 1 0 1 1 D1
0c 001 01 1 1 0 1 0 1 1 C9
0d 001 01 1 1 0 1 0 1 1 D9
0e 001 01 1 1 0 1 0 1 1 C1
0f 001 01 1 1 0 1 0 1 1 B9
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 04000000
....... : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IO APIC #5......
.... register #00: 05000000
....... : physical APIC id: 05
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 05000000
....... : arbitration: 05
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ22 -> 1:6
IRQ23 -> 1:7
IRQ25 -> 1:9
IRQ26 -> 1:10
IRQ27 -> 1:11
IRQ28 -> 1:12
IRQ29 -> 1:13
IRQ30 -> 1:14
IRQ31 -> 1:15
.................................... done.
ACPI: Unable to set IRQ for PCI Interrupt Link [IUSB] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off
PCI: No IRQ known for interrupt pin A of device 00:0f.2
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
PCI: Device 00:00 not found by BIOS
PCI: Device 00:01 not found by BIOS
PCI: Device 00:02 not found by BIOS
PCI: Device 00:78 not found by BIOS
PCI: Device 00:7b not found by BIOS
PCI: Device 00:88 not found by BIOS
PCI: Device 00:8a not found by BIOS
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller at PCI slot 00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
SvrWks CSB5: simplex device: DMA forced
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio
SvrWks CSB5: simplex device: DMA forced
ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio
hda: CRN-8245B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 184k freed
VFS: Mounted root (romfs filesystem) readonly.
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
HP CISS Driver (v 2.4.47)
cciss: Device 0xb178 has been found at bus 0 dev 4 func 0
blocks= 71122560 block_size= 512
heads= 255, sectors= 32, cylinders= 8716 RAID 1(0+1)
blk: queue c02ed9e0, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Partition check:
cciss/c0d0: p1 p2 < p5 p6 p7 p8 p9 p10 >
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 132k freed
Executing init=/sbin/init
Adding Swap: 767016k swap-space (priority -1)
EXT3-fs: cannot change data mode on remount
Real Time Clock Driver v1.10e
Broadcom Gigabit Ethernet Driver bcm5700 with Broadcom NIC Extension (NICE) ver. 6.2.11 (05/16/03)
divert: allocating divert_blk for eth0
eth0: HP NC7781 Gigabit Server Adapter found at mem f7ef0000, IRQ 30, node addr 000bcd83880b
eth0: Broadcom BCM5703 Integrated Copper transceiver found
eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, NAPI ON
divert: allocating divert_blk for eth1
eth1: HP NC7781 Gigabit Server Adapter found at mem f7ff0000, IRQ 29, node addr 000bcd8387ee
eth1: Broadcom BCM5703 Integrated Copper transceiver found
eth1: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, NAPI ON
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
ACPI: Processor [CPU4] (supports C1)
ACPI: Processor [CPU5] (supports C1)
ACPI: Processor [CPU6] (supports C1)
ACPI: Processor [CPU7] (supports C1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,8), internal journal
EXT3-fs: mounted filesystem with journal data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,9), internal journal
EXT3-fs: mounted filesystem with journal data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,10), internal journal
EXT3-fs: mounted filesystem with journal data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,6), internal journal
EXT3-fs: mounted filesystem with journal data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,7), internal journal
EXT3-fs: mounted filesystem with journal data mode.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ACPI: Unable to set IRQ for PCI Interrupt Link [IUSB] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off
PCI: No IRQ known for interrupt pin A of device 00:0f.2
usb-ohci.c: USB OHCI at membase 0xf8912000, IRQ 10
usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
parport_pc: irq specified without base address. Use 'io=' to specify one
inserting floppy driver for 2.4.22-std-up-alt10
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
bcm5700: eth0 NIC Link is UP, 100 Mbps full duplex
bcm5700: eth1 NIC Link is UP, 100 Mbps full duplex
EXT3-fs: cannot change data mode on remount
EXT3-fs: cannot change data mode on remount
EXT3-fs: cannot change data mode on remount
EXT3-fs: cannot change data mode on remount
^ permalink raw reply [flat|nested] 8+ messages in thread
* [sisyphus] Re: Спасайте! "побаловался" с Auto RAID recover...
2003-11-27 13:17 [sisyphus] Спасайте! "побаловался" с Auto RAID recover Evgeny Yugov
@ 2003-11-27 13:41 ` Michael Shigorin
2003-11-27 13:44 ` Evgeny Yugov
2003-11-27 14:58 ` [sisyphus] " Epiphanov Sergei
1 sibling, 1 reply; 8+ messages in thread
From: Michael Shigorin @ 2003-11-27 13:41 UTC (permalink / raw)
To: All
On Thu, Nov 27, 2003 at 07:17:42PM +0600, Evgeny Yugov wrote:
> проблема в том что не перемонтируется корневой раздел,
> "mount -o remount,rw" не помогает, пишет:
> [root@bug0 /]# mount -o remount,rw /
> mount: / not mounted already, or bad option
грузимся с rescue?
какое ядро?
какие fs?
много ли на / уникаьлной информации, помимо /etc ?
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [sisyphus] Re: Спасайте! "побаловался" с Auto RAID recover...
2003-11-27 13:41 ` [sisyphus] " Michael Shigorin
@ 2003-11-27 13:44 ` Evgeny Yugov
2003-11-27 14:41 ` Re[2]: " Evgeny Yugov
0 siblings, 1 reply; 8+ messages in thread
From: Evgeny Yugov @ 2003-11-27 13:44 UTC (permalink / raw)
To: Michael Shigorin
Здравствуйте Michael,
Thursday, November 27, 2003, 7:41:14 PM, you wrote:
MS> On Thu, Nov 27, 2003 at 07:17:42PM +0600, Evgeny Yugov wrote:
>> проблема в том что не перемонтируется корневой раздел,
>> "mount -o remount,rw" не помогает, пишет:
>> [root@bug0 /]# mount -o remount,rw /
>> mount: / not mounted already, or bad option
MS> грузимся с rescue?
Могем
MS> какое ядро?
2.4.22-10(и 8)
MS> какие fs?
ext3 + data=ordered
MS> много ли на / уникаьлной информации, помимо /etc ?
/dev/cciss/c0d0p5 / ext3 defaults,data=journal 1 1
/dev/cciss/c0d0p8 /home ext3 defaults,data=journal 1 2
/dev/cciss/c0d0p9 /opt ext3 defaults,data=journal 1 2
/dev/cciss/c0d0p10 /tmp ext3 defaults,data=journal 1 2
/dev/cciss/c0d0p6 /usr ext3 defaults,data=journal 1 2
/dev/cciss/c0d0p7 /var ext3 defaults,data=journal 1 2
В общем не особо я думаю... тем более что "/" читать могу
--
With Best regards,
Evgeny Yugov,
MTS, programmer of Advanced Technologies Departament.
Registered Linux User #316667
mailto:yugov@scs-900.ru
Origin: Не так страшен русский танк, как его пьяный экипаж.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re[2]: [sisyphus] Re: Спасайте! "побаловался" с Auto RAID recover...
2003-11-27 13:44 ` Evgeny Yugov
@ 2003-11-27 14:41 ` Evgeny Yugov
0 siblings, 0 replies; 8+ messages in thread
From: Evgeny Yugov @ 2003-11-27 14:41 UTC (permalink / raw)
To: Evgeny Yugov, sisyphus
Здравствуйте Evgeny,
Проблема решена, происхождение -- нет.
--
With Best regards,
Evgeny Yugov,
MTS, programmer of Advanced Technologies Departament.
Registered Linux User #316667
mailto:yugov@scs-900.ru
Origin: Кто с мячом к нам придет с тем в футбол и поиграем.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [sisyphus] Спасайте! "побаловался" с Auto RAID recover...
2003-11-27 13:17 [sisyphus] Спасайте! "побаловался" с Auto RAID recover Evgeny Yugov
2003-11-27 13:41 ` [sisyphus] " Michael Shigorin
@ 2003-11-27 14:58 ` Epiphanov Sergei
2003-11-28 8:57 ` Re[2]: " Evgeny Yugov
1 sibling, 1 reply; 8+ messages in thread
From: Epiphanov Sergei @ 2003-11-27 14:58 UTC (permalink / raw)
To: Evgeny Yugov, sisyphus
В сообщении от 27 Ноябрь 2003 16:17 Evgeny Yugov написал:
> Здравствуйте All,
>
> И "запортил" винт с оригиналом...
> проблема в том что не перемонтируется корневой раздел,
> "mount -o remount,rw" не помогает, пишет:
> [root@bug0 /]# mount -o remount,rw /
> mount: / not mounted already, or bad option
>
> Система работает но / не монтируется в RW отсюда много ругани... :o(
> в аттаче dmesg.
Кстати, в таких случаях с mount может помочь
mount -n /dev/.. / -o remount,rw
--
С уважением, Епифанов Сергей
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re[2]: [sisyphus] Спасайте! "побаловался" с Auto RAID recover...
2003-11-27 14:58 ` [sisyphus] " Epiphanov Sergei
@ 2003-11-28 8:57 ` Evgeny Yugov
2003-11-28 9:06 ` Sergey Vlasov
0 siblings, 1 reply; 8+ messages in thread
From: Evgeny Yugov @ 2003-11-28 8:57 UTC (permalink / raw)
To: Epiphanov Sergei
Здравствуйте Epiphanov,
Thursday, November 27, 2003, 8:58:18 PM, you wrote:
ES> В сообщении от 27 Ноябрь 2003 16:17 Evgeny Yugov написал:
>> Здравствуйте All,
>>
>> И "запортил" винт с оригиналом...
>> проблема в том что не перемонтируется корневой раздел,
>> "mount -o remount,rw" не помогает, пишет:
>> [root@bug0 /]# mount -o remount,rw /
>> mount: / not mounted already, or bad option
>>
>> Система работает но / не монтируется в RW отсюда много ругани... :o(
>> в аттаче dmesg.
ES> Кстати, в таких случаях с mount может помочь
ES> mount -n /dev/.. / -o remount,rw
Все вылечилось "rootflag=data=journal"
--
With Best regards,
Evgeny Yugov,
MTS, programmer of Advanced Technologies Departament.
Registered Linux User #316667
mailto:yugov@scs-900.ru
Origin: Если хотите рассмешить Бога - расскажите ему о своих планах.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [sisyphus] Спасайте! "побаловался" с Auto RAID recover...
2003-11-28 8:57 ` Re[2]: " Evgeny Yugov
@ 2003-11-28 9:06 ` Sergey Vlasov
2003-11-28 9:09 ` Evgeny Yugov
0 siblings, 1 reply; 8+ messages in thread
From: Sergey Vlasov @ 2003-11-28 9:06 UTC (permalink / raw)
To: sisyphus
[-- Attachment #1: Type: text/plain, Size: 1048 bytes --]
On Fri, Nov 28, 2003 at 02:57:32PM +0600, Evgeny Yugov wrote:
> Здравствуйте Epiphanov,
>
> Thursday, November 27, 2003, 8:58:18 PM, you wrote:
>
> ES> В сообщении от 27 Ноябрь 2003 16:17 Evgeny Yugov написал:
> >> Здравствуйте All,
> >>
> >> И "запортил" винт с оригиналом...
> >> проблема в том что не перемонтируется корневой раздел,
> >> "mount -o remount,rw" не помогает, пишет:
> >> [root@bug0 /]# mount -o remount,rw /
> >> mount: / not mounted already, or bad option
> >>
> >> Система работает но / не монтируется в RW отсюда много ругани... :o(
> >> в аттаче dmesg.
>
> ES> Кстати, в таких случаях с mount может помочь
> ES> mount -n /dev/.. / -o remount,rw
> Все вылечилось "rootflag=data=journal"
Точнее, "rootflags=data=journal" (не надо засорять архивы опечатками :) )
Через параметр ядра rootflags=... указываются опции монтирования для
корневой файловой системы (просто указать их в fstab недостаточно).
ext3 отлавливает попытки изменения опций data=XXX при remount и
отказывается выполнять перемонтирование с руганью в dmesg.
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* [sisyphus] Спасайте! "побаловался" с Auto RAID recover...
2003-11-28 9:06 ` Sergey Vlasov
@ 2003-11-28 9:09 ` Evgeny Yugov
0 siblings, 0 replies; 8+ messages in thread
From: Evgeny Yugov @ 2003-11-28 9:09 UTC (permalink / raw)
To: Sergey Vlasov
Здравствуйте Sergey,
>> ES> Кстати, в таких случаях с mount может помочь
>> ES> mount -n /dev/.. / -o remount,rw
>> Все вылечилось "rootflag=data=journal"
SV> Точнее, "rootflags=data=journal" (не надо засорять архивы опечатками :) )
Виноват, конечно же ...flags :o/
SV> Через параметр ядра rootflags=... указываются опции монтирования для
SV> корневой файловой системы (просто указать их в fstab недостаточно).
SV> ext3 отлавливает попытки изменения опций data=XXX при remount и
SV> отказывается выполнять перемонтирование с руганью в dmesg.
--
With Best regards,
Evgeny Yugov,
MTS, programmer of Advanced Technologies Departament.
Registered Linux User #316667
mailto:yugov@scs-900.ru
Origin: Если вам долго не звонят родственники или друзья, значит у них все хорошо.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2003-11-28 9:09 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-11-27 13:17 [sisyphus] Спасайте! "побаловался" с Auto RAID recover Evgeny Yugov
2003-11-27 13:41 ` [sisyphus] " Michael Shigorin
2003-11-27 13:44 ` Evgeny Yugov
2003-11-27 14:41 ` Re[2]: " Evgeny Yugov
2003-11-27 14:58 ` [sisyphus] " Epiphanov Sergei
2003-11-28 8:57 ` Re[2]: " Evgeny Yugov
2003-11-28 9:06 ` Sergey Vlasov
2003-11-28 9:09 ` Evgeny Yugov
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git