From: "Girar awaiter (serjigva)" <girar-builder@altlinux.org>
To: Sergey Gvozdetskiy <serjigva@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org,
girar-builder-sisyphus@altlinux.org
Subject: [#358942] [test-only] FAILED task-a11y-orca.git=0.1-alt1
Date: Thu, 3 Oct 2024 16:27:10 +0000
Message-ID: <girar.task.358942.1.1@gyle.mskdc.altlinux.org> (raw)
https://git.altlinux.org/tasks/358942/logs/events.1.1.log
subtask name aarch64 i586 ppc64le x86_64
#100 task-a11y-orca 33 23 39 23
2024-Oct-03 16:23:32 :: test-only task #358942 for sisyphus started by serjigva:
#100 build 0.1-alt1 from /people/serjigva/packages/task-a11y-orca.git fetched at 2024-Oct-03 16:23:30
2024-Oct-03 16:23:34 :: [x86_64] #100 task-a11y-orca.git 0.1-alt1: build start
2024-Oct-03 16:23:34 :: [i586] #100 task-a11y-orca.git 0.1-alt1: build start
2024-Oct-03 16:23:34 :: [ppc64le] #100 task-a11y-orca.git 0.1-alt1: build start
2024-Oct-03 16:23:34 :: [aarch64] #100 task-a11y-orca.git 0.1-alt1: build start
2024-Oct-03 16:23:57 :: [i586] #100 task-a11y-orca.git 0.1-alt1: build OK
2024-Oct-03 16:23:57 :: [x86_64] #100 task-a11y-orca.git 0.1-alt1: build OK
2024-Oct-03 16:24:07 :: [aarch64] #100 task-a11y-orca.git 0.1-alt1: build OK
2024-Oct-03 16:24:13 :: [ppc64le] #100 task-a11y-orca.git 0.1-alt1: build OK
2024-Oct-03 16:24:23 :: #100: task-a11y-orca.git 0.1-alt1: build check OK
2024-Oct-03 16:24:25 :: build check OK
2024-Oct-03 16:24:26 :: noarch check OK
2024-Oct-03 16:24:28 :: plan: src +1 -0 =19881, noarch +1 -0 =20638
2024-Oct-03 16:24:58 :: patched apt indices
2024-Oct-03 16:25:09 :: created next repo
2024-Oct-03 16:25:18 :: duplicate provides check OK
2024-Oct-03 16:25:56 :: dependencies check OK
x86_64: task-a11y-orca=0.1-alt1 install failed:
Speech Dispatcher configuration tool
Do you want to setup a completely new configuration? [yes] :
>Do you want to create/setup a 'user' or 'system' configuration? [user] :
>Warning: You must be root or under sudo to do this.
Configuring system settings for Speech Dispatcher
Default output module [espeak-ng] :
>The value you have chosen is not among the suggested values.
You have chosen 'rhvoice'.
The suggested values are ['espeak-ng', 'espeak', 'festival', 'flite', 'ivona', 'pico', 'espeak-ng-mbrola-generic', 'espeak-mbrola-generic', 'swift-generic', 'epos-generic', 'dtk-generic', 'ibmtts', 'cicero', 'kali', 'mary-generic', 'baratinoo']
Do you want to correct your answer? [yes] :
>Default language (two/three-letter iso language code like "en" or "cs", possibly with a region qualification.) [en-US] :
>Default audio output method [pulse] :
>Default speech rate (on the scale of -100..100, 0 is default, 50 is faster, -50 is slower) [0] :
>Default speech pitch (on the scale of -100..100, 0 is default, 50 is higher, -50 is lower) [0] :
>Default speech pitch range (on the scale of -100..100, 0 is default, 50 is higher, -50 is lower) [0] :
>Traceback (most recent call last):
File "/usr/bin/spd-conf", line 26, in <module>
sys.exit(speechd_config.main())
^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 834, in main
configure.complete_config()
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 749, in complete_config
self.configure_basic_settings(type='system')
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 666, in configure_basic_settings
self.options_substitute(configfile,
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 542, in options_substitute
for line in fileinput.input(configfile, inplace=True, backup=".bak"):
File "/usr/lib64/python3.12/fileinput.py", line 251, in __next__
line = self._readline()
^^^^^^^^^^^^^^^^
File "/usr/lib64/python3.12/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 4912: ordinal not in range(128)
error: %prein(task-a11y-orca-0.1-alt1.noarch) scriptlet failed, exit status 1
error: task-a11y-orca-0.1-alt1.noarch: install failed
hsh-install: Packages installation failed.
2024-Oct-03 16:26:37 :: [x86_64] #100 task-a11y-orca: install check FAILED
2024-Oct-03 16:26:37 :: [x86_64] requesting cancellation of task processing
i586: task-a11y-orca=0.1-alt1 install failed:
Speech Dispatcher configuration tool
Do you want to setup a completely new configuration? [yes] :
>Do you want to create/setup a 'user' or 'system' configuration? [user] :
>Warning: You must be root or under sudo to do this.
Configuring system settings for Speech Dispatcher
Default output module [espeak-ng] :
>The value you have chosen is not among the suggested values.
You have chosen 'rhvoice'.
The suggested values are ['espeak-ng', 'espeak', 'festival', 'flite', 'ivona', 'pico', 'espeak-ng-mbrola-generic', 'espeak-mbrola-generic', 'swift-generic', 'epos-generic', 'dtk-generic', 'ibmtts', 'cicero', 'kali', 'mary-generic', 'baratinoo']
Do you want to correct your answer? [yes] :
>Default language (two/three-letter iso language code like "en" or "cs", possibly with a region qualification.) [en-US] :
>Default audio output method [pulse] :
>Default speech rate (on the scale of -100..100, 0 is default, 50 is faster, -50 is slower) [0] :
>Default speech pitch (on the scale of -100..100, 0 is default, 50 is higher, -50 is lower) [0] :
>Default speech pitch range (on the scale of -100..100, 0 is default, 50 is higher, -50 is lower) [0] :
>Traceback (most recent call last):
File "/usr/bin/spd-conf", line 26, in <module>
sys.exit(speechd_config.main())
^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 834, in main
configure.complete_config()
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 749, in complete_config
self.configure_basic_settings(type='system')
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 666, in configure_basic_settings
self.options_substitute(configfile,
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 542, in options_substitute
for line in fileinput.input(configfile, inplace=True, backup=".bak"):
File "/usr/lib/python3.12/fileinput.py", line 251, in __next__
line = self._readline()
^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 4912: ordinal not in range(128)
error: %prein(task-a11y-orca-0.1-alt1.noarch) scriptlet failed, exit status 1
error: task-a11y-orca-0.1-alt1.noarch: install failed
hsh-install: Packages installation failed.
2024-Oct-03 16:26:41 :: [i586] #100 task-a11y-orca: install check FAILED
aarch64: task-a11y-orca=0.1-alt1 install failed:
Speech Dispatcher configuration tool
Do you want to setup a completely new configuration? [yes] :
>Do you want to create/setup a 'user' or 'system' configuration? [user] :
>Warning: You must be root or under sudo to do this.
Configuring system settings for Speech Dispatcher
Default output module [espeak-ng] :
>The value you have chosen is not among the suggested values.
You have chosen 'rhvoice'.
The suggested values are ['espeak-ng', 'espeak', 'festival', 'flite', 'ivona', 'pico', 'espeak-ng-mbrola-generic', 'espeak-mbrola-generic', 'swift-generic', 'epos-generic', 'dtk-generic', 'ibmtts', 'cicero', 'kali', 'mary-generic', 'baratinoo']
Do you want to correct your answer? [yes] :
>Default language (two/three-letter iso language code like "en" or "cs", possibly with a region qualification.) [en-US] :
>Default audio output method [pulse] :
>Default speech rate (on the scale of -100..100, 0 is default, 50 is faster, -50 is slower) [0] :
>Default speech pitch (on the scale of -100..100, 0 is default, 50 is higher, -50 is lower) [0] :
>Default speech pitch range (on the scale of -100..100, 0 is default, 50 is higher, -50 is lower) [0] :
>Traceback (most recent call last):
File "/usr/bin/spd-conf", line 26, in <module>
sys.exit(speechd_config.main())
^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 834, in main
configure.complete_config()
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 749, in complete_config
self.configure_basic_settings(type='system')
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 666, in configure_basic_settings
self.options_substitute(configfile,
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 542, in options_substitute
for line in fileinput.input(configfile, inplace=True, backup=".bak"):
File "/usr/lib64/python3.12/fileinput.py", line 251, in __next__
line = self._readline()
^^^^^^^^^^^^^^^^
File "/usr/lib64/python3.12/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 4912: ordinal not in range(128)
error: %prein(task-a11y-orca-0.1-alt1.noarch) scriptlet failed, exit status 1
error: task-a11y-orca-0.1-alt1.noarch: install failed
hsh-install: Packages installation failed.
2024-Oct-03 16:26:57 :: [aarch64] #100 task-a11y-orca: install check FAILED
ppc64le: task-a11y-orca=0.1-alt1 install failed:
Speech Dispatcher configuration tool
Do you want to setup a completely new configuration? [yes] :
>Do you want to create/setup a 'user' or 'system' configuration? [user] :
>Warning: You must be root or under sudo to do this.
Configuring system settings for Speech Dispatcher
Default output module [espeak-ng] :
>The value you have chosen is not among the suggested values.
You have chosen 'rhvoice'.
The suggested values are ['espeak-ng', 'espeak', 'festival', 'flite', 'ivona', 'pico', 'espeak-ng-mbrola-generic', 'espeak-mbrola-generic', 'swift-generic', 'epos-generic', 'dtk-generic', 'ibmtts', 'cicero', 'kali', 'mary-generic', 'baratinoo']
Do you want to correct your answer? [yes] :
>Default language (two/three-letter iso language code like "en" or "cs", possibly with a region qualification.) [en-US] :
>Default audio output method [pulse] :
>Default speech rate (on the scale of -100..100, 0 is default, 50 is faster, -50 is slower) [0] :
>Default speech pitch (on the scale of -100..100, 0 is default, 50 is higher, -50 is lower) [0] :
>Default speech pitch range (on the scale of -100..100, 0 is default, 50 is higher, -50 is lower) [0] :
>Traceback (most recent call last):
File "/usr/bin/spd-conf", line 26, in <module>
sys.exit(speechd_config.main())
^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 834, in main
configure.complete_config()
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 749, in complete_config
self.configure_basic_settings(type='system')
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 666, in configure_basic_settings
self.options_substitute(configfile,
File "/usr/lib/python3/site-packages/speechd_config/config.py", line 542, in options_substitute
for line in fileinput.input(configfile, inplace=True, backup=".bak"):
File "/usr/lib64/python3.12/fileinput.py", line 251, in __next__
line = self._readline()
^^^^^^^^^^^^^^^^
File "/usr/lib64/python3.12/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 4912: ordinal not in range(128)
error: %prein(task-a11y-orca-0.1-alt1.noarch) scriptlet failed, exit status 1
error: task-a11y-orca-0.1-alt1.noarch: install failed
hsh-install: Packages installation failed.
2024-Oct-03 16:27:09 :: [ppc64le] #100 task-a11y-orca: install check FAILED
2024-Oct-03 16:26:38 :: [x86_64] install check FAILED
2024-Oct-03 16:26:41 :: [i586] install check FAILED
2024-Oct-03 16:26:57 :: [aarch64] install check FAILED
2024-Oct-03 16:27:10 :: [ppc64le] install check FAILED
2024-Oct-03 16:27:10 :: task #358942 for sisyphus FAILED
reply other threads:[~2024-10-03 16:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=girar.task.358942.1.1@gyle.mskdc.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=devel@lists.altlinux.org \
--cc=girar-builder-sisyphus@altlinux.org \
--cc=serjigva@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git