* [#355560] [test-only] FAILED rpm-build-vm.git=1.70-alt1
@ 2024-08-19 16:40 Girar awaiter (vt)
2024-08-19 18:38 ` [#355560] TESTED (try 2) rpm-build-vm.git=1.70-alt1 Girar awaiter (vt)
2024-08-19 18:40 ` [#355560] DONE (try 3) rpm-build-vm.git=1.70-alt1 Girar pender (vt)
0 siblings, 2 replies; 3+ messages in thread
From: Girar awaiter (vt) @ 2024-08-19 16:40 UTC (permalink / raw)
To: Vitaly Chikunov; +Cc: sisyphus-incominger, girar-builder-sisyphus
https://git.altlinux.org/tasks/355560/logs/events.1.1.log
subtask name aarch64 i586 ppc64le x86_64
#100 rpm-build-vm 48 38 56 37
2024-Aug-19 16:33:12 :: test-only task #355560 for sisyphus started by vt:
#100 build 1.70-alt1 from /people/vt/packages/rpm-build-vm.git fetched at 2024-Aug-19 16:33:10
2024-Aug-19 16:33:14 :: [i586] #100 rpm-build-vm.git 1.70-alt1: build start
2024-Aug-19 16:33:15 :: [aarch64] #100 rpm-build-vm.git 1.70-alt1: build start
2024-Aug-19 16:33:15 :: [x86_64] #100 rpm-build-vm.git 1.70-alt1: build start
2024-Aug-19 16:33:15 :: [ppc64le] #100 rpm-build-vm.git 1.70-alt1: build start
2024-Aug-19 16:33:52 :: [x86_64] #100 rpm-build-vm.git 1.70-alt1: build OK
2024-Aug-19 16:33:52 :: [i586] #100 rpm-build-vm.git 1.70-alt1: build OK
2024-Aug-19 16:34:03 :: [aarch64] #100 rpm-build-vm.git 1.70-alt1: build OK
2024-Aug-19 16:34:11 :: [ppc64le] #100 rpm-build-vm.git 1.70-alt1: build OK
2024-Aug-19 16:34:34 :: #100: rpm-build-vm.git 1.70-alt1: build check OK
2024-Aug-19 16:34:36 :: build check OK
2024-Aug-19 16:34:41 :: noarch check OK
2024-Aug-19 16:34:43 :: plan: src +1 -1 =19743, aarch64 +3 -3 =33663, i586 +3 -3 =33068, noarch +2 -2 =20547, ppc64le +3 -3 =32429, x86_64 +3 -3 =34530
#100 rpm-build-vm 1.69-alt1 -> 1.70-alt1
Mon Aug 19 2024 Vitaly Chikunov <vt@altlinux> 1.70-alt1
- In Sisyphus bring latest kernel instead of un-def.
2024-Aug-19 16:35:29 :: patched apt indices
2024-Aug-19 16:35:41 :: created next repo
2024-Aug-19 16:35:51 :: duplicate provides check OK
2024-Aug-19 16:36:31 :: dependencies check OK
nm: /tmp/yYTnhkeVwR/wsoZGabZjf: no symbols
nm: /tmp/BEXCEjTJ42/CoUaHeoEmN: no symbols
nm: /tmp/2jtLSgPP8c/U3wiTkTPad: no symbols
nm: /tmp/hTJInE50p6/oQQ8niVG1B: no symbols
2024-Aug-19 16:36:56 :: [x86_64 i586 aarch64 ppc64le] ELF symbols check OK
2024-Aug-19 16:37:22 :: [x86_64] #100 rpm-build-vm: install check OK
2024-Aug-19 16:37:22 :: [i586] #100 rpm-build-vm: install check OK
2024-Aug-19 16:37:35 :: [aarch64] #100 rpm-build-vm: install check OK
2024-Aug-19 16:37:38 :: [ppc64le] #100 rpm-build-vm: install check OK
i586: rpm-build-vm-checkinstall=1.70-alt1 install failed:
<13>Aug 19 16:37:43 rpmi: rpm-build-vm-checkinstall-1.70-alt1 sisyphus+355560.100.1.1 1724085228 installed
+ ls -l /dev/kvm
crw-rw-rw- 1 root root 10, 232 Aug 19 16:37 /dev/kvm
+ set
+ grep '^LD_'
LD_LIBRARY_PATH=/usr/lib/libfakeroot:/usr/lib64/libfakeroot:/usr/lib32/libfakeroot
LD_PRELOAD=libfakeroot.so
+ find /boot
+ /usr/lib/rpm/posttrans-filetriggers /tmp/filelist
Creating regular file /tmp/vm-ext4.img
find: '/.out': Permission denied
find: '/.host': Permission denied
vm-ext4.img: clean, 12617/104832 files, 154846/418686 blocks
+ rm /tmp/filelist
+ kvm-ok
KVM is available.
+ timeout 300 vm-run --heredoc
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.6OsrKzXsqB no_timer_check'
++ uname -a
Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:13:23 UTC 2024 i686 GNU/Linux
++ echo root '(date)' '(date)'
root (date) (date)
1.33user 1.58system 0:01.95elapsed 149%CPU (0avgtext+0avgdata 176688maxresident)k
0inputs+0outputs (0major+12624minor)pagefaults 0swaps
+ ulimit -v 67108864
+ timeout 60 vm-run date
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.X25X1Kdvbf no_timer_check'
++ date
Mon Aug 19 16:37:50 UTC 2024
1.31user 1.63system 0:01.99elapsed 148%CPU (0avgtext+0avgdata 165000maxresident)k
0inputs+0outputs (0major+14160minor)pagefaults 0swaps
+ ulimit -v 33554432
+ timeout 60 vm-run date
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.yjjmQij749 no_timer_check'
++ date
Mon Aug 19 16:37:53 UTC 2024
1.35user 1.63system 0:01.95elapsed 152%CPU (0avgtext+0avgdata 159340maxresident)k
0inputs+0outputs (0major+14351minor)pagefaults 0swaps
+ ulimit -v 16777216
+ timeout 60 vm-run date
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.uZSFCv4pu1 no_timer_check'
++ date
Mon Aug 19 16:37:55 UTC 2024
1.30user 1.49system 0:01.91elapsed 145%CPU (0avgtext+0avgdata 161020maxresident)k
0inputs+0outputs (0major+14413minor)pagefaults 0swaps
+ ulimit -v 8388608
+ timeout 60 vm-run --maxcpu=8 date
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.i84SORWIKZ no_timer_check'
++ date
Mon Aug 19 16:37:57 UTC 2024
1.34user 1.69system 0:02.03elapsed 149%CPU (0avgtext+0avgdata 160692maxresident)k
0inputs+0outputs (0major+14486minor)pagefaults 0swaps
+ ulimit -v 4194304
+ timeout 60 vm-run --maxcpu=2 date
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=2 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.ZfcGlNiGAA no_timer_check'
++ date
Mon Aug 19 16:37:59 UTC 2024
1.26user 1.22system 0:01.89elapsed 131%CPU (0avgtext+0avgdata 140140maxresident)k
0inputs+0outputs (0major+14803minor)pagefaults 0swaps
+ timeout 300 vm-run --kvm=cond 'date; date'
+ time qemu-system-i386 -enable-kvm -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.76exK5k7Y8 no_timer_check'
++ date
Mon Aug 19 16:38:01 UTC 2024
++ date
Mon Aug 19 16:38:01 UTC 2024
1.35user 1.73system 0:02.05elapsed 150%CPU (0avgtext+0avgdata 163084maxresident)k
0inputs+0outputs (0major+14930minor)pagefaults 0swaps
+ timeout 300 vm-run --kvm=cond echo '(date)' '$USER'
+ time qemu-system-i386 -enable-kvm -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.crXZThBOLt no_timer_check'
++ echo '(date)' '$USER'
(date) $USER
1.35user 1.76system 0:02.04elapsed 151%CPU (0avgtext+0avgdata 163256maxresident)k
0inputs+0outputs (0major+14414minor)pagefaults 0swaps
+ type -p busybox
/bin/busybox
+ timeout 300 vm-run --initrd --append=rddebug 'uname -a; exit 7'
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -device virtio-serial-pci -device virtserialport,chardev=ec,name=exitcode -chardev file,id=ec,path=/tmp/vm.zRetyPOJcc.ret -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 RDSCRIPT=/tmp/vm.zRetyPOJcc rddebug no_timer_check'
init: vm-run initrd
init: mount proc to /proc
init: insmod 'netfs.ko'
[ 0.254251] netfs: FS-Cache loaded
init: insmod '9pnet.ko'
[ 0.259257] 9pnet: Installing 9P2000 support
init: insmod '9p.ko'
[ 0.263212] 9p: Installing v9fs 9p2000 file system support
init: insmod 'virtio_ring.ko'
init: insmod 'virtio.ko'
init: insmod '9pnet_virtio.ko'
init: insmod 'virtio_console.ko'
init: insmod 'virtio_pci_modern_dev.ko'
init: insmod 'virtio_pci_legacy_dev.ko'
init: insmod 'virtio_pci.ko'
[ 0.291329] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[ 0.324922] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.336846] ACPI: \_SB_.LNKD: Enabled at IRQ 11
init: mount devtmpfs to dev
init: mount sysfs to /sys
init: found exitcode virtio-port: vport0p1 (iter=0)
init: found /dev/vport0p1 device (iter=0)
init: run rdscript=/tmp/vm.zRetyPOJcc
init: exec 'toybox': No such file or directory
init: try /bin/busybox [sh]
+ uname -a
Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:13:23 UTC 2024 i686 GNU/Linux
+ exit 7
init: rdscript exited with status 7
init: wrote exitcode=7 into /dev/vport0p1
[ 0.346364] ACPI: PM: Preparing to enter system sleep state S5
[ 0.347218] reboot: Power down
0.99user 0.16system 0:01.12elapsed 103%CPU (0avgtext+0avgdata 156612maxresident)k
0inputs+0outputs (0major+15365minor)pagefaults 0swaps
+ test 7 -eq 7
+ timeout --preserve-status 300 vm-run 'true; false; true'
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.kzm7FmTyJr no_timer_check'
++ true
++ false
1.32user 1.58system 0:01.95elapsed 149%CPU (0avgtext+0avgdata 161060maxresident)k
0inputs+0outputs (0major+14717minor)pagefaults 0swaps
+ timeout 300 vm-run --mem=max free -g
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.3Mo29J75sZ no_timer_check'
++ free -g
total used free shared buff/cache available
Mem: 1 0 1 0 0 1
Swap: 0 0 0
1.32user 1.56system 0:01.97elapsed 146%CPU (0avgtext+0avgdata 160524maxresident)k
0inputs+0outputs (0major+14545minor)pagefaults 0swaps
+ timeout 300 vm-run --cpu=max lscpu
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=32 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.8odvFp7Zgx no_timer_check'
++ lscpu
Architecture: i686
CPU op-mode(s): 32-bit
Address sizes: 36 bits physical, 0 bits virtual
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Vendor ID: AuthenticAMD
BIOS Vendor ID: QEMU
Model name: AMD EPYC 7543 32-Core Processor
BIOS Model name: pc-i440fx-9.0 CPU @ 2.0GHz
BIOS CPU family: 1
CPU family: 25
Model: 1
Thread(s) per core: 1
Core(s) per socket: 8
Socket(s): 1
Stepping: 1
BogoMIPS: 5600.00
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge m
ca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall
nx mmxext fxsr_opt pdpe1gb rdtscp rep_good cpuid extd
_apicid tsc_known_freq pni pclmulqdq ssse3 fma cx16 ss
e4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes
xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy c
r8_legacy abm sse4a misalignsse 3dnowprefetch osvw per
fctr_core ssbd ibrs ibpb stibp vmmcall fsgsbase tsc_ad
just bmi1 avx2 smep bmi2 invpcid rdseed adx smap clflu
shopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves clzer
o xsaveerptr wbnoinvd arat umip pku vaes vpclmulqdq rd
pid arch_capabilities
Virtualization features:
Hypervisor vendor: KVM
Virtualization type: full
Caches (sum of all):
L1d: 512 KiB (8 instances)
L1i: 512 KiB (8 instances)
L2: 4 MiB (8 instances)
L3: 128 MiB (8 instances)
Vulnerabilities:
Gather data sampling: Not affected
Itlb multihit: Not affected
L1tf: Not affected
Mds: Not affected
Meltdown: Not affected
Mmio stale data: Not affected
Reg file data sampling: Not affected
Retbleed: Not affected
Spec rstack overflow: Vulnerable
Spec store bypass: Vulnerable
Spectre v1: Vulnerable: __user pointer sanitization and usercopy b
arriers only; no swapgs barriers
Spectre v2: Vulnerable; IBPB: disabled; STIBP: disabled; PBRSB-eIB
RS: Not affected; BHI: Not affected
Srbds: Not affected
Tsx async abort: Not affected
1.44user 1.78system 0:02.14elapsed 150%CPU (0avgtext+0avgdata 162364maxresident)k
0inputs+0outputs (0major+15025minor)pagefaults 0swaps
+ df -h /tmp
Filesystem Size Used Avail Use% Mounted on
- 64G 1.3G 63G 2% /
+ timeout 300 vm-run --tmp=max df -h /tmp
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -drive file=/tmp/vm-tmpfs.qcow2 -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.Iz0vOQKvxj no_timer_check'
++ df -h /tmp
Filesystem Size Used Avail Use% Mounted on
tmpfs 32G 4.0K 32G 1% /tmp
1.41user 1.84system 0:02.05elapsed 157%CPU (0avgtext+0avgdata 187468maxresident)k
0inputs+0outputs (0major+13450minor)pagefaults 0swaps
+ rm /tmp/vm-tmpfs.qcow2
+ timeout 300 vm-run --verbose --overlay=ext4 uname -a
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.YvEg8NYVIf VERBOSE OVERLAY=ext4 no_timer_check'
- mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
- mount -t sysfs -o nosuid,noexec,nodev sys /sys
- mount -t tmpfs -o size=100% tmpfs /tmp
- mount -t tmpfs tmpfs /var/log
- mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
- mount -t configfs configfs /sys/kernel/config
- mount -t debugfs debugfs /sys/kernel/debug
- mount -t securityfs securityfs /sys/kernel/security
- mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
- mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
- ip link set dev lo up
- modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
- modprobe virtio-rng
- truncate -s 11M /usr/src/ext4.0.img
- /sbin/mkfs.ext4 -q /usr/src/ext4.0.img
- mount -v -t ext4 -o loop /usr/src/ext4.0.img /mnt/0
mount: /dev/loop0 mounted on /mnt/0.
- modprobe overlay
- mount -v -t overlay -olowerdir=/usr/src,upperdir=/mnt/0/upper,workdir=/mnt/0/work overlay /usr/src
mount: overlay mounted on /usr/src.
++ uname -a
Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:13:23 UTC 2024 i686 GNU/Linux
1.45user 2.03system 0:02.16elapsed 161%CPU (0avgtext+0avgdata 168680maxresident)k
0inputs+0outputs (0major+14457minor)pagefaults 0swaps
+ rmdir /mnt/0
+ rm /usr/src/ext4.0.img
+ timeout 300 vm-run --rootfs --verbose df
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/block/virtio_blk.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -drive file=/tmp/vm-ext4.img,format=raw,if=virtio -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.mQJ6hDAjCh VERBOSE no_timer_check root=UUID=e1b8dde4-b9b3-424f-a2d6-794d65387ac5'
- mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
- mount -t sysfs -o nosuid,noexec,nodev sys /sys
- mount -t 9p -o 9p2000.L,trans=virtio,access=any,msize=262144 virtio-9p:/ /mnt/9p
- mount --bind /mnt/9p/usr/src /usr/src
- mount -t tmpfs -o size=100% tmpfs /tmp
- mount -t tmpfs tmpfs /var/log
- mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
- mount -t configfs configfs /sys/kernel/config
- mount -t debugfs debugfs /sys/kernel/debug
- mount -t securityfs securityfs /sys/kernel/security
- mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
- mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
- ip link set dev lo up
- modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
- modprobe virtio-rng
++ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/vda 1610720 555364 1038972 35% /
tmpfs 1024368 4 1024364 1% /run
virtio-9p:/ 67108860 1274112 65834748 2% /mnt/9p
tmpfs 2048740 0 2048740 0% /tmp
tmpfs 1024368 0 1024368 0% /var/log
devtmpfs 1023368 0 1023368 0% /dev
tmpfs 1024 0 1024 0% /dev/shm
1.08user 0.23system 0:01.39elapsed 94%CPU (0avgtext+0avgdata 173888maxresident)k
0inputs+0outputs (0major+15785minor)pagefaults 0swaps
+ rm /tmp/vm-ext4.img
+ timeout 300 vm-run --hvc --no-quiet 'dmesg -r | grep -F "printk: console [hvc0] enabled"'
+ time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -device virtio-serial-pci -device virtconsole,chardev=con -chardev stdio,mux=on,signal=off,id=con -mon chardev=con -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=hvc0 mitigations=off nokaslr panic=-1 SCRIPT=/tmp/vm.vs491RXulH no_timer_check'
[ 0.291676] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.301691] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[ 1.045866] SCSI subsystem initialized
[ 1.069414] scsi host0: ata_piix
[ 1.069644] scsi host1: ata_piix
[ 1.069707] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14 lpm-pol 0
[ 1.069773] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15 lpm-pol 0
++ grep -F 'printk: console [hvc0] enabled'
++ dmesg -r
[ 1.532926] ACPI: PM: Preparing to enter system sleep state S5
[ 1.533063] reboot: Power down
1.38user 2.20system 0:02.32elapsed 154%CPU (0avgtext+0avgdata 163720maxresident)k
0inputs+0outputs (0major+15763minor)pagefaults 0swaps
error: %post(rpm-build-vm-checkinstall-1.70-alt1.noarch) scriptlet failed, exit status 1
error: rpm-build-vm-checkinstall-1.70-alt1.noarch: install failed
hsh-install: Packages installation failed.
2024-Aug-19 16:38:22 :: [i586] #100 rpm-build-vm-checkinstall: install check FAILED
2024-Aug-19 16:38:22 :: [i586] requesting cancellation of task processing
2024-Aug-19 16:38:22 :: [i586] #100 rpm-build-vm-createimage: install check CANCELLED
x86_64: rpm-build-vm-checkinstall=1.70-alt1 install failed:
<13>Aug 19 16:37:42 rpmi: rpm-build-vm-checkinstall-1.70-alt1 sisyphus+355560.100.1.1 1724085228 installed
+ ls -l /dev/kvm
crw-rw-rw- 1 root root 10, 232 Aug 19 16:37 /dev/kvm
+ set
+ grep '^LD_'
LD_LIBRARY_PATH=/usr/lib64/libfakeroot:/usr/lib64/libfakeroot:/usr/lib32/libfakeroot
LD_PRELOAD=libfakeroot.so
+ find /boot
+ /usr/lib/rpm/posttrans-filetriggers /tmp/filelist
Creating regular file /tmp/vm-ext4.img
find: '/.out': Permission denied
find: '/.host': Permission denied
vm-ext4.img: clean, 12812/144000 files, 214298/575667 blocks
+ rm /tmp/filelist
+ kvm-ok
+ timeout 300 vm-run --heredoc
KVM is available.
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496412 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.fH6i3SKuyN no_timer_check'
++ uname -a
Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:13:25 UTC 2024 x86_64 GNU/Linux
++ echo root '(date)' '(date)'
root (date) (date)
3.12user 4.02system 0:04.01elapsed 177%CPU (0avgtext+0avgdata 8536184maxresident)k
0inputs+0outputs (0major+30090minor)pagefaults 0swaps
+ ulimit -v 67108864
+ timeout 60 vm-run date
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 62464 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.WV20sCxF5H no_timer_check'
++ date
Mon Aug 19 16:37:53 UTC 2024
2.29user 3.15system 0:02.65elapsed 205%CPU (0avgtext+0avgdata 1439160maxresident)k
0inputs+0outputs (0major+12659minor)pagefaults 0swaps
+ ulimit -v 33554432
+ timeout 60 vm-run date
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 29696 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.fGgVm5ue5E no_timer_check'
++ date
Mon Aug 19 16:37:56 UTC 2024
2.32user 3.35system 0:02.60elapsed 218%CPU (0avgtext+0avgdata 850632maxresident)k
0inputs+0outputs (0major+11616minor)pagefaults 0swaps
+ ulimit -v 16777216
+ timeout 60 vm-run date
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 13312 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.6sqJXIoYbl no_timer_check'
++ date
Mon Aug 19 16:37:59 UTC 2024
2.26user 3.36system 0:02.58elapsed 217%CPU (0avgtext+0avgdata 568656maxresident)k
0inputs+0outputs (0major+11950minor)pagefaults 0swaps
+ ulimit -v 8388608
+ timeout 60 vm-run --maxcpu=8 date
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=8 -m 7040 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.2TZEZI3J7u no_timer_check'
++ date
Mon Aug 19 16:38:01 UTC 2024
1.65user 1.55system 0:02.28elapsed 140%CPU (0avgtext+0avgdata 388136maxresident)k
0inputs+0outputs (0major+11429minor)pagefaults 0swaps
+ ulimit -v 4194304
+ timeout 60 vm-run --maxcpu=2 date
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=2 -m 3424 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.ttA6p9tVvk no_timer_check'
++ date
Mon Aug 19 16:38:04 UTC 2024
1.57user 1.28system 0:02.19elapsed 130%CPU (0avgtext+0avgdata 217052maxresident)k
0inputs+0outputs (0major+9896minor)pagefaults 0swaps
+ timeout 300 vm-run --kvm=cond 'date; date'
+ time qemu-system-x86_64 -enable-kvm -smp cores=32 -m 496604 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.NuvY8gb553 no_timer_check'
++ date
Mon Aug 19 16:38:07 UTC 2024
++ date
Mon Aug 19 16:38:07 UTC 2024
3.06user 3.77system 0:03.91elapsed 174%CPU (0avgtext+0avgdata 8558636maxresident)k
0inputs+0outputs (0major+27565minor)pagefaults 0swaps
+ timeout 300 vm-run --kvm=cond echo '(date)' '$USER'
+ time qemu-system-x86_64 -enable-kvm -smp cores=32 -m 496512 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.X8BxwNlILH no_timer_check'
++ echo '(date)' '$USER'
(date) $USER
3.18user 3.73system 0:03.95elapsed 174%CPU (0avgtext+0avgdata 8548728maxresident)k
0inputs+0outputs (0major+26639minor)pagefaults 0swaps
+ type -p busybox
/bin/busybox
+ timeout 300 vm-run --initrd --append=rddebug 'uname -a; exit 7'
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496797 -serial mon:stdio -device virtio-serial-pci -device virtserialport,chardev=ec,name=exitcode -chardev file,id=ec,path=/tmp/vm.Nq6ENYeupL.ret -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 RDSCRIPT=/tmp/vm.Nq6ENYeupL rddebug no_timer_check'
init: vm-run initrd
init: mount proc to /proc
init: insmod 'netfs.ko'
[ 1.956028] netfs: FS-Cache loaded
init: insmod '9pnet.ko'
[ 1.972082] 9pnet: Installing 9P2000 support
init: insmod '9p.ko'
[ 1.975394] 9p: Installing v9fs 9p2000 file system support
init: insmod 'virtio_ring.ko'
init: insmod 'virtio.ko'
init: insmod '9pnet_virtio.ko'
init: insmod 'virtio_console.ko'
init: insmod 'virtio_pci_modern_dev.ko'
init: insmod 'virtio_pci_legacy_dev.ko'
init: insmod 'virtio_pci.ko'
[ 2.002365] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[ 2.025662] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 2.036139] ACPI: \_SB_.LNKD: Enabled at IRQ 11
init: mount devtmpfs to dev
init: mount sysfs to /sys
init: found exitcode virtio-port: vport0p1 (iter=0)
init: found /dev/vport0p1 device (iter=0)
init: run rdscript=/tmp/vm.Nq6ENYeupL
init: exec 'toybox': No such file or directory
init: try /bin/busybox [sh]
+ uname -a
Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:13:25 UTC 2024 x86_64 GNU/Linux
+ exit 7
init: rdscript exited with status 7
init: wrote exitcode=7 into /dev/vport0p1
[ 2.049593] ACPI: PM: Preparing to enter system sleep state S5
[ 2.050782] reboot: Power down
2.74user 2.00system 0:03.13elapsed 151%CPU (0avgtext+0avgdata 8528652maxresident)k
0inputs+0outputs (0major+28711minor)pagefaults 0swaps
+ test 7 -eq 7
+ timeout --preserve-status 300 vm-run 'true; false; true'
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496681 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.TA25QXjJvI no_timer_check'
++ true
++ false
3.01user 3.80system 0:03.88elapsed 175%CPU (0avgtext+0avgdata 8547040maxresident)k
0inputs+0outputs (0major+27037minor)pagefaults 0swaps
+ timeout 300 vm-run --mem=max free -g
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496558 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.0MkN3FuYQv no_timer_check'
++ free -g
total used free shared buff/cache available
Mem: 477 3 476 0 0 473
Swap: 0 0 0
3.11user 3.82system 0:04.00elapsed 173%CPU (0avgtext+0avgdata 8540324maxresident)k
0inputs+0outputs (0major+27159minor)pagefaults 0swaps
+ timeout 300 vm-run --cpu=max lscpu
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496870 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.WyDPo3DrQx no_timer_check'
++ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 40 bits physical, 48 bits virtual
Byte Order: Little Endian
CPU(s): 32
On-line CPU(s) list: 0-31
Vendor ID: AuthenticAMD
BIOS Vendor ID: QEMU
Model name: QEMU Virtual CPU version 2.5+
BIOS Model name: pc-i440fx-9.0 CPU @ 2.0GHz
BIOS CPU family: 1
CPU family: 15
Model: 107
Thread(s) per core: 1
Core(s) per socket: 32
Socket(s): 1
Stepping: 1
BogoMIPS: 5599.99
Flags: fpu de pse tsc msr pae mce cx8 apic sep mtrr pge mca c
mov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx
lm rep_good nopl cpuid extd_apicid tsc_known_freq pni
cx16 x2apic hypervisor lahf_lm cmp_legacy 3dnowprefetc
h vmmcall
Virtualization features:
Hypervisor vendor: KVM
Virtualization type: full
Caches (sum of all):
L1d: 2 MiB (32 instances)
L1i: 2 MiB (32 instances)
L2: 16 MiB (32 instances)
L3: 512 MiB (32 instances)
NUMA:
NUMA node(s): 1
NUMA node0 CPU(s): 0-31
Vulnerabilities:
Gather data sampling: Not affected
Itlb multihit: Not affected
L1tf: Not affected
Mds: Not affected
Meltdown: Not affected
Mmio stale data: Not affected
Reg file data sampling: Not affected
Retbleed: Not affected
Spec rstack overflow: Not affected
Spec store bypass: Not affected
Spectre v1: Vulnerable: __user pointer sanitization and usercopy b
arriers only; no swapgs barriers
Spectre v2: Vulnerable; STIBP: disabled; PBRSB-eIBRS: Not affected
; BHI: Not affected
Srbds: Not affected
Tsx async abort: Not affected
3.22user 3.90system 0:03.98elapsed 179%CPU (0avgtext+0avgdata 8560980maxresident)k
0inputs+0outputs (0major+26691minor)pagefaults 0swaps
+ df -h /tmp
Filesystem Size Used Avail Use% Mounted on
- 64G 1.7G 63G 3% /
+ timeout 300 vm-run --tmp=max df -h /tmp
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496759 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -drive file=/tmp/vm-tmpfs.qcow2 -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.SeSD1DvTtX no_timer_check'
++ df -h /tmp
Filesystem Size Used Avail Use% Mounted on
tmpfs 63G 4.0K 63G 1% /tmp
3.13user 4.10system 0:04.07elapsed 177%CPU (0avgtext+0avgdata 8601492maxresident)k
0inputs+0outputs (0major+30850minor)pagefaults 0swaps
+ rm /tmp/vm-tmpfs.qcow2
+ timeout 300 vm-run --verbose --overlay=ext4 uname -a
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496340 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.lnm7M5oI1w VERBOSE OVERLAY=ext4 no_timer_check'
- mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
- mount -t sysfs -o nosuid,noexec,nodev sys /sys
- mount -t tmpfs -o size=100% tmpfs /tmp
- mount -t tmpfs tmpfs /var/log
- mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
- mount -t configfs configfs /sys/kernel/config
- mount -t debugfs debugfs /sys/kernel/debug
- mount -t securityfs securityfs /sys/kernel/security
- mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
- mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
- ip link set dev lo up
- modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
- modprobe virtio-rng
- truncate -s 11M /usr/src/ext4.0.img
- /sbin/mkfs.ext4 -q /usr/src/ext4.0.img
- mount -v -t ext4 -o loop /usr/src/ext4.0.img /mnt/0
mount: /dev/loop0 mounted on /mnt/0.
- modprobe overlay
- mount -v -t overlay -olowerdir=/usr/src,upperdir=/mnt/0/upper,workdir=/mnt/0/work overlay /usr/src
mount: overlay mounted on /usr/src.
++ uname -a
Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:13:25 UTC 2024 x86_64 GNU/Linux
3.26user 4.37system 0:04.13elapsed 184%CPU (0avgtext+0avgdata 8556568maxresident)k
0inputs+0outputs (0major+26524minor)pagefaults 0swaps
+ rmdir /mnt/0
+ rm /usr/src/ext4.0.img
+ timeout 300 vm-run --rootfs --verbose df
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/block/virtio_blk.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496053 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -drive file=/tmp/vm-ext4.img,format=raw,if=virtio -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.yyCT9qyIrp VERBOSE no_timer_check root=UUID=0e1db91a-09b5-48ba-a44a-8ff193586fec'
- mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
- mount -t sysfs -o nosuid,noexec,nodev sys /sys
- mount -t 9p -o 9p2000.L,trans=virtio,access=any,msize=262144 virtio-9p:/ /mnt/9p
- mount --bind /mnt/9p/usr/src /usr/src
- mount -t tmpfs -o size=100% tmpfs /tmp
- mount -t tmpfs tmpfs /var/log
- mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
- mount -t configfs configfs /sys/kernel/config
- mount -t debugfs debugfs /sys/kernel/debug
- mount -t securityfs securityfs /sys/kernel/security
- mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
- mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
- ip link set dev lo up
- modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
- modprobe virtio-rng
++ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/vda 2194196 748724 1429088 35% /
tmpfs 249852960 4 249852956 1% /run
virtio-9p:/ 67108860 1685124 65423736 3% /mnt/9p
tmpfs 499705920 0 499705920 0% /tmp
tmpfs 249852960 0 249852960 0% /var/log
devtmpfs 249849108 0 249849108 0% /dev
tmpfs 1024 0 1024 0% /dev/shm
3.07user 2.60system 0:03.52elapsed 161%CPU (0avgtext+0avgdata 8575876maxresident)k
0inputs+0outputs (0major+31737minor)pagefaults 0swaps
+ rm /tmp/vm-ext4.img
+ timeout 300 vm-run --hvc --no-quiet 'dmesg -r | grep -F "printk: console [hvc0] enabled"'
+ time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496583 -device virtio-serial-pci -device virtconsole,chardev=con -chardev stdio,mux=on,signal=off,id=con -mon chardev=con -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=hvc0 mitigations=off nokaslr panic=-1 SCRIPT=/tmp/vm.YSWYl2xXl0 no_timer_check'
[ 1.962484] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 1.972644] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[ 2.626428] SCSI subsystem initialized
[ 2.661493] scsi host0: ata_piix
[ 2.661687] scsi host1: ata_piix
[ 2.661759] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14 lpm-pol 0
[ 2.661845] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15 lpm-pol 0
[ 2.934465] random: crng init done
++ dmesg -r
++ grep -F 'printk: console [hvc0] enabled'
[ 3.084333] ACPI: PM: Preparing to enter system sleep state S5
[ 3.084513] reboot: Power down
3.07user 4.27system 0:04.14elapsed 177%CPU (0avgtext+0avgdata 8553032maxresident)k
0inputs+0outputs (0major+28147minor)pagefaults 0swaps
error: %post(rpm-build-vm-checkinstall-1.70-alt1.noarch) scriptlet failed, exit status 1
error: rpm-build-vm-checkinstall-1.70-alt1.noarch: install failed
hsh-install: Packages installation failed.
2024-Aug-19 16:38:45 :: [x86_64] #100 rpm-build-vm-checkinstall: install check FAILED
aarch64: rpm-build-vm-checkinstall=1.70-alt1 install failed:
<13>Aug 19 16:38:05 rpmi: rpm-build-vm-checkinstall-1.70-alt1 sisyphus+355560.100.1.1 1724085228 installed
+ ls -l /dev/kvm
crw-rw-rw- 1 root root 10, 232 Aug 19 16:38 /dev/kvm
+ set
+ grep '^LD_'
LD_LIBRARY_PATH=/usr/lib64/libfakeroot:/usr/lib64/libfakeroot:/usr/lib32/libfakeroot
LD_PRELOAD=libfakeroot.so
+ find /boot
+ /usr/lib/rpm/posttrans-filetriggers /tmp/filelist
Creating regular file /tmp/vm-ext4.img
find: '/.out': Permission denied
find: '/.host': Permission denied
vm-ext4.img: clean, 13127/162240 files, 193359/648231 blocks
+ rm /tmp/filelist
+ kvm-ok
KVM is available.
+ timeout 300 vm-run --heredoc
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.H5rTUs1gmp'
++ uname -a
Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:15:46 UTC 2024 aarch64 GNU/Linux
++ echo root '(date)' '(date)'
root (date) (date)
0.89user 1.78system 0:01.48elapsed 180%CPU (0avgtext+0avgdata 351224maxresident)k
0inputs+0outputs (0major+8754minor)pagefaults 0swaps
+ ulimit -v 67108864
+ timeout 60 vm-run date
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.U6QWlx6n3F'
++ date
Mon Aug 19 16:38:14 UTC 2024
0.90user 1.81system 0:01.47elapsed 183%CPU (0avgtext+0avgdata 353276maxresident)k
0inputs+0outputs (0major+9268minor)pagefaults 0swaps
+ ulimit -v 33554432
+ timeout 60 vm-run date
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.O5cxRVHhu9'
++ date
Mon Aug 19 16:38:16 UTC 2024
0.90user 1.76system 0:01.47elapsed 180%CPU (0avgtext+0avgdata 355328maxresident)k
0inputs+0outputs (0major+8758minor)pagefaults 0swaps
+ ulimit -v 16777216
+ timeout 60 vm-run date
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.SQCsSu5M9M'
++ date
Mon Aug 19 16:38:17 UTC 2024
0.87user 1.66system 0:01.44elapsed 176%CPU (0avgtext+0avgdata 359392maxresident)k
0inputs+0outputs (0major+8752minor)pagefaults 0swaps
+ ulimit -v 8388608
+ timeout 60 vm-run --maxcpu=8 date
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.8kwvEyz7DO'
++ date
Mon Aug 19 16:38:19 UTC 2024
0.88user 1.71system 0:01.46elapsed 178%CPU (0avgtext+0avgdata 355272maxresident)k
0inputs+0outputs (0major+10277minor)pagefaults 0swaps
+ ulimit -v 4194304
+ timeout 60 vm-run --maxcpu=2 date
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=2 -m 3424 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.JufT2UDg7r'
++ date
Mon Aug 19 16:38:21 UTC 2024
0.83user 1.31system 0:01.23elapsed 174%CPU (0avgtext+0avgdata 312256maxresident)k
0inputs+0outputs (0major+8253minor)pagefaults 0swaps
+ timeout 300 vm-run --kvm=cond 'date; date'
+ time qemu-system-aarch64 -enable-kvm -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.RfhUskFvsl'
++ date
Mon Aug 19 16:38:22 UTC 2024
++ date
Mon Aug 19 16:38:22 UTC 2024
0.89user 1.88system 0:01.48elapsed 187%CPU (0avgtext+0avgdata 359400maxresident)k
0inputs+0outputs (0major+8753minor)pagefaults 0swaps
+ timeout 300 vm-run --kvm=cond echo '(date)' '$USER'
+ time qemu-system-aarch64 -enable-kvm -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.nvG57GyNJR'
++ echo '(date)' '$USER'
(date) $USER
0.87user 1.69system 0:01.44elapsed 177%CPU (0avgtext+0avgdata 359404maxresident)k
0inputs+0outputs (0major+8754minor)pagefaults 0swaps
+ type -p busybox
/bin/busybox
+ timeout 300 vm-run --initrd --append=rddebug 'uname -a; exit 7'
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -device virtio-serial-pci -device virtserialport,chardev=ec,name=exitcode -chardev file,id=ec,path=/tmp/vm.JK31y4YTX9.ret -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 RDSCRIPT=/tmp/vm.JK31y4YTX9 rddebug'
init: vm-run initrd
init: mount proc to /proc
init: insmod 'netfs.ko'
[ 0.301119] netfs: FS-Cache loaded
init: insmod '9pnet.ko'
[ 0.305238] 9pnet: Installing 9P2000 support
init: insmod '9p.ko'
[ 0.308294] 9p: Installing v9fs 9p2000 file system support
init: insmod 'virtio_ring.ko'
init: insmod 'virtio.ko'
init: insmod '9pnet_virtio.ko'
init: insmod 'virtio_console.ko'
init: insmod 'virtio_pci_modern_dev.ko'
init: insmod 'virtio_pci_legacy_dev.ko'
init: insmod 'virtio_pci.ko'
[ 0.319551] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)
[ 0.349374] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003)
[ 0.353173] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003)
init: mount devtmpfs to dev
init: mount sysfs to /sys
init: found exitcode virtio-port: vport0p1 (iter=0)
init: found /dev/vport0p1 device (iter=0)
init: run rdscript=/tmp/vm.JK31y4YTX9
init: exec 'toybox': No such file or directory
init: try /bin/busybox [sh]
+ uname -a
Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:15:46 UTC 2024 aarch64 GNU/Linux
+ exit 7
init: rdscript exited with status 7
init: wrote exitcode=7 into /dev/vport0p1
[ 0.365792] reboot: Power down
0.45user 0.40system 0:00.79elapsed 107%CPU (0avgtext+0avgdata 348136maxresident)k
0inputs+0outputs (0major+9958minor)pagefaults 0swaps
+ test 7 -eq 7
+ timeout --preserve-status 300 vm-run 'true; false; true'
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.TZ0RZHwDsi'
++ true
++ false
0.89user 1.79system 0:01.47elapsed 181%CPU (0avgtext+0avgdata 357348maxresident)k
0inputs+0outputs (0major+8753minor)pagefaults 0swaps
+ timeout 300 vm-run --mem=max free -g
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 273532 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.Y3znGgxLMl'
++ free -g
total used free shared buff/cache available
Mem: 262 1 262 0 0 260
Swap: 0 0 0
2.22user 7.77system 0:08.59elapsed 116%CPU (0avgtext+0avgdata 5459948maxresident)k
0inputs+0outputs (0major+18196minor)pagefaults 0swaps
+ timeout 300 vm-run --cpu=max lscpu
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=24 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.vPzFFdVpDi'
++ lscpu
Architecture: aarch64
CPU op-mode(s): 64-bit
Byte Order: Little Endian
CPU(s): 24
On-line CPU(s) list: 0-23
Vendor ID: HiSilicon
Model name: Kunpeng-920
Model: 0
Thread(s) per core: 1
Core(s) per cluster: 24
Socket(s): -
Cluster(s): 1
Stepping: 0x1
BogoMIPS: 200.00
Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fph
p asimdhp cpuid asimdrdm jscvt fcma dcpop asimddp asim
dfhm
NUMA:
NUMA node(s): 1
NUMA node0 CPU(s): 0-23
Vulnerabilities:
Gather data sampling: Not affected
Itlb multihit: Not affected
L1tf: Not affected
Mds: Not affected
Meltdown: Not affected
Mmio stale data: Not affected
Reg file data sampling: Not affected
Retbleed: Not affected
Spec rstack overflow: Not affected
Spec store bypass: Vulnerable
Spectre v1: Mitigation; __user pointer sanitization
Spectre v2: Not affected
Srbds: Not affected
Tsx async abort: Not affected
1.00user 2.57system 0:02.06elapsed 173%CPU (0avgtext+0avgdata 399632maxresident)k
0inputs+0outputs (0major+10156minor)pagefaults 0swaps
+ df -h /tmp
Filesystem Size Used Avail Use% Mounted on
- 64G 1.7G 63G 3% /
+ timeout 300 vm-run --tmp=max df -h /tmp
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -drive file=/tmp/vm-tmpfs.qcow2 -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.1Y03hbCEcR'
++ df -h /tmp
Filesystem Size Used Avail Use% Mounted on
tmpfs 63G 4.0K 63G 1% /tmp
0.95user 2.01system 0:01.61elapsed 183%CPU (0avgtext+0avgdata 407096maxresident)k
0inputs+0outputs (0major+9735minor)pagefaults 0swaps
+ rm /tmp/vm-tmpfs.qcow2
+ timeout 300 vm-run --verbose --overlay=ext4 uname -a
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.7289VLGTXX VERBOSE OVERLAY=ext4'
- mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
- mount -t sysfs -o nosuid,noexec,nodev sys /sys
- mount -t tmpfs -o size=100% tmpfs /tmp
- mount -t tmpfs tmpfs /var/log
- mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
- mount -t configfs configfs /sys/kernel/config
- mount -t debugfs debugfs /sys/kernel/debug
- mount -t securityfs securityfs /sys/kernel/security
- mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
- mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
- ip link set dev lo up
- modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
- modprobe virtio-rng
- truncate -s 11M /usr/src/ext4.0.img
- /sbin/mkfs.ext4 -q /usr/src/ext4.0.img
- mount -v -t ext4 -o loop /usr/src/ext4.0.img /mnt/0
mount: /dev/loop0 mounted on /mnt/0.
- modprobe overlay
- mount -v -t overlay -olowerdir=/usr/src,upperdir=/mnt/0/upper,workdir=/mnt/0/work overlay /usr/src
mount: overlay mounted on /usr/src.
++ uname -a
Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:15:46 UTC 2024 aarch64 GNU/Linux
1.04user 2.29system 0:01.70elapsed 194%CPU (0avgtext+0avgdata 359388maxresident)k
0inputs+0outputs (0major+8760minor)pagefaults 0swaps
+ rmdir /mnt/0
+ rm /usr/src/ext4.0.img
+ timeout 300 vm-run --rootfs --verbose df
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/block/virtio_blk.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -drive file=/tmp/vm-ext4.img,format=raw,if=virtio -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.yjWtTojiFL VERBOSE root=UUID=3cc6b73a-3fbf-4917-bce1-eae134b1eea7'
- mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
- mount -t sysfs -o nosuid,noexec,nodev sys /sys
- mount -t 9p -o 9p2000.L,trans=virtio,access=any,msize=262144 virtio-9p:/ /mnt/9p
- mount --bind /mnt/9p/usr/src /usr/src
- mount -t tmpfs -o size=100% tmpfs /tmp
- mount -t tmpfs tmpfs /var/log
- mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
- mount -t configfs configfs /sys/kernel/config
- mount -t debugfs debugfs /sys/kernel/debug
- mount -t securityfs securityfs /sys/kernel/security
- mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
- mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
- ip link set dev lo up
- modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
- modprobe virtio-rng
++ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/vda 2479036 659552 1803100 27% /
tmpfs 2005744 4 2005740 1% /run
virtio-9p:/ 67108860 1689912 65418948 3% /mnt/9p
tmpfs 4011492 0 4011492 0% /tmp
tmpfs 2005744 0 2005744 0% /var/log
devtmpfs 1870572 0 1870572 0% /dev
tmpfs 1024 0 1024 0% /dev/shm
0.57user 0.48system 0:00.91elapsed 115%CPU (0avgtext+0avgdata 380432maxresident)k
0inputs+0outputs (0major+9194minor)pagefaults 0swaps
+ rm /tmp/vm-ext4.img
+ timeout 300 vm-run --hvc --no-quiet 'dmesg -r | grep -F "printk: console [hvc0] enabled"'
+ time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -device virtio-serial-pci -device virtconsole,chardev=con -chardev stdio,mux=on,signal=off,id=con -mon chardev=con -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=hvc0 mitigations=off nokaslr panic=-1 SCRIPT=/tmp/vm.N0Vc5O5d7c'
[ 1.120398] SCSI subsystem initialized
++ dmesg -r
++ grep -F 'printk: console [hvc0] enabled'
[ 1.441572] reboot: Power down
0.93user 2.74system 0:01.87elapsed 197%CPU (0avgtext+0avgdata 366496maxresident)k
0inputs+0outputs (0major+9689minor)pagefaults 0swaps
error: %post(rpm-build-vm-checkinstall-1.70-alt1.noarch) scriptlet failed, exit status 1
error: rpm-build-vm-checkinstall-1.70-alt1.noarch: install failed
hsh-install: Packages installation failed.
2024-Aug-19 16:38:45 :: [aarch64] #100 rpm-build-vm-checkinstall: install check FAILED
2024-Aug-19 16:38:45 :: [x86_64] #100 rpm-build-vm-createimage: install check CANCELLED
2024-Aug-19 16:38:45 :: [aarch64] #100 rpm-build-vm-createimage: install check CANCELLED
ppc64le: rpm-build-vm-checkinstall=1.70-alt1 install failed:
<13>Aug 19 16:38:12 rpmi: rpm-build-vm-checkinstall-1.70-alt1 sisyphus+355560.100.1.1 1724085228 installed
+ ls -l /dev/kvm
crw-rw-rw- 1 root root 10, 232 Aug 19 16:38 /dev/kvm
+ set
+ grep '^LD_'
LD_LIBRARY_PATH=/usr/lib64/libfakeroot:/usr/lib64/libfakeroot:/usr/lib32/libfakeroot
LD_PRELOAD=libfakeroot.so
+ find /boot
+ /usr/lib/rpm/posttrans-filetriggers /tmp/filelist
Creating regular file /tmp/vm-ext4.img
find: '/.out': Permission denied
find: '/.host': Permission denied
vm-ext4.img: clean, 11779/202400 files, 192140/808128 blocks
+ rm /tmp/filelist
+ kvm-ok
KVM is available.
+ timeout 300 vm-run --heredoc
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.wBaKdkpR1W'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.wBaKdkpR1W
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 0000000800000000
rmo_top : 0000000030000000
ram_top : 0000000800000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1++ uname -a
Linux (none) 6.10.6-6.10-alt1 #1 SMP Mon Aug 19 06:14:13 UTC 2024 ppc64le GNU/Linux
++ echo root '(date)' '(date)'
root (date) (date)
5.33user 1.00system 0:06.01elapsed 105%CPU (0avgtext+0avgdata 501952maxresident)k
0inputs+0outputs (0major+2273minor)pagefaults 0swaps
+ ulimit -v 67108864
+ timeout 60 vm-run date
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.dFNkdQ9QeB'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.dFNkdQ9QeB
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 0000000800000000
rmo_top : 0000000030000000
ram_top : 0000000800000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1++ date
Mon Aug 19 16:38:29 UTC 2024
5.32user 1.07system 0:06.06elapsed 105%CPU (0avgtext+0avgdata 485568maxresident)k
0inputs+0outputs (0major+2271minor)pagefaults 0swaps
+ ulimit -v 33554432
+ timeout 60 vm-run date
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 31488 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.vbL1HoaPdJ'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.vbL1HoaPdJ
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 00000007b0000000
rmo_top : 0000000030000000
ram_top : 00000007b0000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1++ date
Mon Aug 19 16:38:35 UTC 2024
5.34user 0.98system 0:06.01elapsed 105%CPU (0avgtext+0avgdata 485504maxresident)k
0inputs+0outputs (0major+2271minor)pagefaults 0swaps
+ ulimit -v 16777216
+ timeout 60 vm-run date
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 15104 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.eUXJuvdAxi'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.eUXJuvdAxi
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 00000003b0000000
rmo_top : 0000000030000000
ram_top : 00000003b0000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1++ date
Mon Aug 19 16:38:42 UTC 2024
5.11user 0.87system 0:05.63elapsed 106%CPU (0avgtext+0avgdata 465472maxresident)k
0inputs+0outputs (0major+2220minor)pagefaults 0swaps
+ ulimit -v 8388608
+ timeout 60 vm-run --maxcpu=8 date
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 6912 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.LDY1eFaB18'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.LDY1eFaB18
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 00000001b0000000
rmo_top : 0000000030000000
ram_top : 00000001b0000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1++ date
Mon Aug 19 16:38:48 UTC 2024
4.98user 0.78system 0:05.44elapsed 106%CPU (0avgtext+0avgdata 433472maxresident)k
0inputs+0outputs (0major+2223minor)pagefaults 0swaps
+ ulimit -v 4194304
+ timeout 60 vm-run --maxcpu=2 date
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=2 -m 3328 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.vZEvA978ei'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.vZEvA978ei
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 00000000d0000000
rmo_top : 0000000030000000
ram_top : 00000000d0000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1++ date
Mon Aug 19 16:38:53 UTC 2024
4.62user 0.79system 0:05.06elapsed 106%CPU (0avgtext+0avgdata 316224maxresident)k
0inputs+0outputs (0major+2179minor)pagefaults 0swaps
+ timeout 300 vm-run --kvm=cond 'date; date'
+ time qemu-system-ppc64 -enable-kvm -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.EueXYB8BNs'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.EueXYB8BNs
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 0000000800000000
rmo_top : 0000000030000000
ram_top : 0000000800000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1++ date
Mon Aug 19 16:38:59 UTC 2024
++ date
Mon Aug 19 16:38:59 UTC 2024
5.27user 1.00system 0:05.93elapsed 105%CPU (0avgtext+0avgdata 501824maxresident)k
0inputs+0outputs (0major+2306minor)pagefaults 0swaps
+ timeout 300 vm-run --kvm=cond echo '(date)' '$USER'
+ time qemu-system-ppc64 -enable-kvm -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.VFDkTKNCeW'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.VFDkTKNCeW
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 0000000800000000
rmo_top : 0000000030000000
ram_top : 0000000800000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1++ echo '(date)' '$USER'
(date) $USER
5.27user 0.97system 0:05.91elapsed 105%CPU (0avgtext+0avgdata 484160maxresident)k
0inputs+0outputs (0major+2286minor)pagefaults 0swaps
+ type -p busybox
/bin/busybox
+ timeout 300 vm-run --initrd --append=rddebug 'uname -a; exit 7'
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -device virtio-serial-pci -device virtserialport,chardev=ec,name=exitcode -chardev file,id=ec,path=/tmp/vm.srBeDykHdX.ret -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 RDSCRIPT=/tmp/vm.srBeDykHdX rddebug'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1003 virtio [ serial ]
00 0800 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@1
00 1000 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 RDSCRIPT=/tmp/vm.srBeDykHdX rddebug
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002b70000
alloc_top : 0000000030000000
alloc_top_hi : 0000000800000000
rmo_top : 0000000030000000
ram_top : 0000000800000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002b80000 -> 0x0000000002b80b26
Device tree struct 0x0000000002b90000 -> 0x0000000002ba0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1init: vm-run initrd
init: mount proc to /proc
init: insmod 'netfs.ko'
[ 0.243493] netfs: FS-Cache loaded
init: insmod '9pnet.ko'
[ 0.248524] 9pnet: Installing 9P2000 support
init: insmod '9p.ko'
[ 0.251572] 9p: Installing v9fs 9p2000 file system support
init: insmod 'virtio_ring.ko'
init: insmod 'virtio.ko'
init: insmod '9pnet_virtio.ko'
init: insmod 'virtio_console.ko'
init: insmod 'virtio_pci_modern_dev.ko'
init: insmod 'virtio_pci_legacy_dev.ko'
init: insmod 'virtio_pci.ko'
[ 0.261924] virtio-pci 0000:00:00.0: enabling device (0100 -> 0103)
[ 0.262939] virtio-pci 0000:00:00.0: ibm,query-pe-dma-windows(2026) 0 8000000 20000000 returned 0, lb=2000000000 ps=107 wn=1
[ 0.263274] virtio-pci 0000:00:00.0: ibm,create-pe-dma-window(2027) 0 8000000 20000000 18 23 returned 0 (liobn = 0x80000001 starting addr = 8000000 0)
[ 0.308777] virtio-pci 0000:00:02.0: enabling device (0100 -> 0103)
[ 0.310937] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
init: mount devtmpfs to dev
init: mount sysfs to /sys
init: found exitcode virtio-port: vport0p1 (iter=0)
init: found /dev/vport0p1 device (iter=0)
init: run rdscript=/tmp/vm.srBeDykHdX
init: exec 'toybox': No such file or directory
init: try /bin/busybox [sh]
+ uname -a
Linux (none) 6.10.6-6.10-alt1 #1 SMP Mon Aug 19 06:14:13 UTC 2024 ppc64le GNU/Linux
+ exit 7
init: rdscript exited with status 7
init: wrote exitcode=7 into /dev/vport0p1
[ 0.320275] reboot: Power down
4.49user 0.41system 0:04.86elapsed 101%CPU (0avgtext+0avgdata 458368maxresident)k
0inputs+0outputs (0major+2335minor)pagefaults 0swaps
+ test 7 -eq 7
+ timeout --preserve-status 300 vm-run 'true; false; true'
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.BLsJJcjCMI'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.BLsJJcjCMI
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 0000000800000000
rmo_top : 0000000030000000
ram_top : 0000000800000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1++ true
++ false
5.26user 0.97system 0:05.89elapsed 105%CPU (0avgtext+0avgdata 451328maxresident)k
0inputs+0outputs (0major+2252minor)pagefaults 0swaps
+ timeout 300 vm-run --mem=max free -g
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 487168 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.TyyN3zPH6y'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.TyyN3zPH6y
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 00000076f0000000
rmo_top : 0000000030000000
ram_top : 00000076f0000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1++ free -g
total used free shared buff/cache available
Mem: 475 1 474 0 0 473
Swap: 0 0 0
12.08user 4.58system 0:16.36elapsed 101%CPU (0avgtext+0avgdata 1161536maxresident)k
0inputs+0outputs (0major+3143minor)pagefaults 0swaps
+ timeout 300 vm-run --cpu=max lscpu
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=43 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.5ceVJKvBS0'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.5ceVJKvBS0
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 0000000800000000
rmo_top : 0000000030000000
ram_top : 0000000800000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1++ lscpu
Architecture: ppc64le
Byte Order: Little Endian
CPU(s): 43
On-line CPU(s) list: 0-42
Model name: POWER8 (architected), altivec supported
Model: 2.0 (pvr 004d 0200)
Thread(s) per core: 1
Core(s) per socket: 43
Socket(s): 1
Virtualization features:
Hypervisor vendor: KVM
Virtualization type: para
Caches (sum of all):
L1d: 1.3 MiB (43 instances)
L1i: 1.3 MiB (43 instances)
NUMA:
NUMA node(s): 1
NUMA node0 CPU(s): 0-42
Vulnerabilities:
Gather data sampling: Not affected
Itlb multihit: Not affected
L1tf: Vulnerable
Mds: Not affected
Meltdown: Vulnerable
Mmio stale data: Not affected
Reg file data sampling: Not affected
Retbleed: Not affected
Spec rstack overflow: Not affected
Spec store bypass: Vulnerable
Spectre v1: Vulnerable
Spectre v2: Vulnerable
Srbds: Not affected
Tsx async abort: Not affected
6.67user 1.16system 0:07.05elapsed 111%CPU (0avgtext+0avgdata 711680maxresident)k
0inputs+0outputs (0major+2455minor)pagefaults 0swaps
+ df -h /tmp
Filesystem Size Used Avail Use% Mounted on
- 64G 1.8G 63G 3% /
+ timeout 300 vm-run --tmp=max df -h /tmp
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -drive file=/tmp/vm-tmpfs.qcow2 -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.cxtZ9sNDx4'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
Populating /vdevice/v-scsi@71000002
SCSI: Looking for devices
8000000000000000 DISK : "QEMU QEMU HARDDISK 2.5+"
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.cxtZ9sNDx4
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 0000000800000000
rmo_top : 0000000030000000
ram_top : 0000000800000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b3b
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1++ df -h /tmp
Filesystem Size Used Avail Use% Mounted on
tmpfs 32G 64K 32G 1% /tmp
5.96user 1.04system 0:06.67elapsed 105%CPU (0avgtext+0avgdata 470400maxresident)k
0inputs+0outputs (0major+2342minor)pagefaults 0swaps
+ rm /tmp/vm-tmpfs.qcow2
+ timeout 300 vm-run --verbose --overlay=ext4 uname -a
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.VYCbm2ioFv VERBOSE OVERLAY=ext4'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.VYCbm2ioFv VERBOSE OVERLAY=ext4
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 0000000800000000
rmo_top : 0000000030000000
ram_top : 0000000800000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1- mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
- mount -t sysfs -o nosuid,noexec,nodev sys /sys
- mount -t tmpfs -o size=100% tmpfs /tmp
- mount -t tmpfs tmpfs /var/log
- mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
- mount -t configfs configfs /sys/kernel/config
- mount -t debugfs debugfs /sys/kernel/debug
- mount -t securityfs securityfs /sys/kernel/security
- mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
- mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
- ip link set dev lo up
- modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
- modprobe virtio-rng
- truncate -s 11M /usr/src/ext4.0.img
- /sbin/mkfs.ext4 -q /usr/src/ext4.0.img
- mount -v -t ext4 -o loop /usr/src/ext4.0.img /mnt/0
mount: /dev/loop0 mounted on /mnt/0.
- modprobe overlay
- mount -v -t overlay -olowerdir=/usr/src,upperdir=/mnt/0/upper,workdir=/mnt/0/work overlay /usr/src
mount: overlay mounted on /usr/src.
++ uname -a
Linux (none) 6.10.6-6.10-alt1 #1 SMP Mon Aug 19 06:14:13 UTC 2024 ppc64le GNU/Linux
5.64user 1.34system 0:06.55elapsed 106%CPU (0avgtext+0avgdata 501824maxresident)k
0inputs+0outputs (0major+2272minor)pagefaults 0swaps
+ rmdir /mnt/0
+ rm /usr/src/ext4.0.img
+ timeout 300 vm-run --rootfs --verbose df
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/block/virtio_blk.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -drive file=/tmp/vm-ext4.img,format=raw,if=virtio -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.8Cm8vaD3sL VERBOSE root=UUID=862e2917-0eab-4d7f-a74c-7b93e59ab384'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF^[[0m^[[?25l **********************************************************************
^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:48
FW Version = git-3a259df2449fc4a4
Press "s" to enter Open Firmware.\r
\r
^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
C05A0\rPopulating /pci@800000020000000
00 0000 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@0
00 0800 (D) : 1af4 1005 legacy-device*
00 1000 (D) : 1af4 1001 virtio [ block ]
C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
C0890\rC08A0\rC08A8\rC08B0\rScanning USB
C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes)
C08FF\r
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.8Cm8vaD3sL VERBOSE root=UUID=862e2917-0eab-4d7f-a74c-7b93e59ab384
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 0000000800000000
rmo_top : 0000000030000000
ram_top : 0000000800000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b24
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
\rLinux ppc64le
#1 SMP Mon Aug 1- mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
- mount -t sysfs -o nosuid,noexec,nodev sys /sys
- mount -t 9p -o 9p2000.L,trans=virtio,access=any,msize=262144 virtio-9p:/ /mnt/9p
- mount --bind /mnt/9p/usr/src /usr/src
- mount -t tmpfs -o size=100% tmpfs /tmp
- mount -t tmpfs tmpfs /var/log
- mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
- mount -t configfs configfs /sys/kernel/config
- mount -t debugfs debugfs /sys/kernel/debug
- mount -t securityfs securityfs /sys/kernel/security
- mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
- mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
- ip link set dev lo up
- modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
- modprobe virtio-rng
++ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/vda 3106672 642724 2447564 21% /
tmpfs 16716224 64 16716160 1% /run
virtio-9p:/ 67108800 1884672 65224128 3% /mnt/9p
tmpfs 33432512 0 33432512 0% /tmp
tmpfs 16716224 0 16716224 0% /var/log
devtmpfs 16712832 0 16712832 0% /dev
tmpfs 1024 0 1024 0% /dev/shm
4.69user 0.47system 0:05.05elapsed 102%CPU (0avgtext+0avgdata 521344maxresident)k
0inputs+0outputs (0major+2353minor)pagefaults 0swaps
+ rm /tmp/vm-ext4.img
+ timeout 300 vm-run --hvc --no-quiet 'dmesg -r | grep -F "printk: console [hvc0] enabled"'
+ time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -device virtio-serial-pci -device virtconsole,chardev=con -chardev stdio,mux=on,signal=off,id=con -mon chardev=con -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr panic=-1 SCRIPT=/tmp/vm.b1USezNnCf'
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
SLOF **********************************************************************
^[[0m^[[?25l^[[1mQEMU Starting
^[[0m Build Date = Sep 18 2023 18:57:51
FW Version = git-3a259df2449fc4a4
\0\0\0Press 's' to enter Open Firmware.
Populating /vdevice methods
Populating /vdevice/nvram@71000000
Populating /pci@800000020000000
00 0000 (D) : 1af4 1003 virtio [ serial ]
00 0800 (D) : 1af4 1009 virtio [ network ]
Populating /pci@800000020000000/virtio-9p@1
00 1000 (D) : 1af4 1005 legacy-device*
No NVRAM common partition, re-initializing...
Scanning USB
No console specified using vsterm
Detected RAM kernel at 400000 (25702d0 bytes)
Welcome to Open Firmware
Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /pci@800000020000000/communication-controller@0
Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
Detected machine type: 0000000000000101
command line: console=hvc0 mitigations=off nokaslr panic=-1 SCRIPT=/tmp/vm.b1USezNnCf
Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
Can't open directory /proc/device-tree/cpus/
done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000002a80000
alloc_top : 0000000030000000
alloc_top_hi : 0000000800000000
rmo_top : 0000000030000000
ram_top : 0000000800000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a90000 -> 0x0000000002a90b13
Device tree struct 0x0000000002aa0000 -> 0x0000000002ab0000
[ 1.441893] SCSI subsystem initialized
++ dmesg -r
++ grep -F 'printk: console [hvc0] enabled'
[ 1.985792] reboot: Power down
5.56user 1.75system 0:06.64elapsed 110%CPU (0avgtext+0avgdata 489344maxresident)k
0inputs+0outputs (0major+2344minor)pagefaults 0swaps
error: %post(rpm-build-vm-checkinstall-1.70-alt1.noarch) scriptlet failed, exit status 1
error: rpm-build-vm-checkinstall-1.70-alt1.noarch: install failed
hsh-install: Packages installation failed.
2024-Aug-19 16:40:09 :: [ppc64le] #100 rpm-build-vm-checkinstall: install check FAILED
2024-Aug-19 16:40:09 :: [ppc64le] #100 rpm-build-vm-createimage: install check CANCELLED
2024-Aug-19 16:38:23 :: [i586] install check FAILED
2024-Aug-19 16:38:46 :: [x86_64] install check FAILED
2024-Aug-19 16:38:46 :: [aarch64] install check FAILED
2024-Aug-19 16:40:09 :: [ppc64le] install check FAILED
2024-Aug-19 16:40:10 :: task #355560 for sisyphus FAILED
^ permalink raw reply [flat|nested] 3+ messages in thread* [#355560] TESTED (try 2) rpm-build-vm.git=1.70-alt1
2024-08-19 16:40 [#355560] [test-only] FAILED rpm-build-vm.git=1.70-alt1 Girar awaiter (vt)
@ 2024-08-19 18:38 ` Girar awaiter (vt)
2024-08-19 18:40 ` [#355560] DONE (try 3) rpm-build-vm.git=1.70-alt1 Girar pender (vt)
1 sibling, 0 replies; 3+ messages in thread
From: Girar awaiter (vt) @ 2024-08-19 18:38 UTC (permalink / raw)
To: Vitaly Chikunov; +Cc: sisyphus-incominger, girar-builder-sisyphus
https://git.altlinux.org/tasks/355560/logs/events.2.1.log
subtask name aarch64 i586 ppc64le x86_64
#200 rpm-build-vm 49 37 58 37
2024-Aug-19 18:28:44 :: test-only task #355560 for sisyphus resumed by vt:
#100 removed
#200 build 1.70-alt1 from /people/vt/packages/rpm-build-vm.git fetched at 2024-Aug-19 18:28:42
2024-Aug-19 18:28:46 :: [aarch64] #200 rpm-build-vm.git 1.70-alt1: build start
2024-Aug-19 18:28:46 :: [ppc64le] #200 rpm-build-vm.git 1.70-alt1: build start
2024-Aug-19 18:28:46 :: [x86_64] #200 rpm-build-vm.git 1.70-alt1: build start
2024-Aug-19 18:28:46 :: [i586] #200 rpm-build-vm.git 1.70-alt1: build start
2024-Aug-19 18:29:23 :: [x86_64] #200 rpm-build-vm.git 1.70-alt1: build OK
2024-Aug-19 18:29:23 :: [i586] #200 rpm-build-vm.git 1.70-alt1: build OK
2024-Aug-19 18:29:35 :: [aarch64] #200 rpm-build-vm.git 1.70-alt1: build OK
2024-Aug-19 18:29:44 :: [ppc64le] #200 rpm-build-vm.git 1.70-alt1: build OK
2024-Aug-19 18:30:06 :: #200: rpm-build-vm.git 1.70-alt1: build check OK
2024-Aug-19 18:30:09 :: build check OK
2024-Aug-19 18:30:14 :: noarch check OK
2024-Aug-19 18:30:16 :: plan: src +1 -1 =19753, aarch64 +3 -3 =33683, i586 +3 -3 =33080, noarch +2 -2 =20547, ppc64le +3 -3 =32445, x86_64 +3 -3 =34550
#200 rpm-build-vm 1.69-alt1 -> 1.70-alt1
Mon Aug 19 2024 Vitaly Chikunov <vt@altlinux> 1.70-alt1
- In Sisyphus bring latest kernel instead of un-def.
2024-Aug-19 18:30:59 :: patched apt indices
2024-Aug-19 18:31:10 :: created next repo
2024-Aug-19 18:31:19 :: duplicate provides check OK
2024-Aug-19 18:31:57 :: dependencies check OK
nm: /tmp/1H2UYx2UM2/HlMvceMao1: no symbols
nm: /tmp/y1lP7roPUd/kzF5x5Qmp7: no symbols
nm: /tmp/jXb22fvoi3/SOUxldnLLC: no symbols
nm: /tmp/5RhmJWisz6/okv5gA_kxM: no symbols
2024-Aug-19 18:32:24 :: [x86_64 i586 aarch64 ppc64le] ELF symbols check OK
2024-Aug-19 18:32:49 :: [i586] #200 rpm-build-vm: install check OK
2024-Aug-19 18:32:49 :: [x86_64] #200 rpm-build-vm: install check OK
2024-Aug-19 18:33:03 :: [aarch64] #200 rpm-build-vm: install check OK
2024-Aug-19 18:33:06 :: [ppc64le] #200 rpm-build-vm: install check OK
2024-Aug-19 18:33:59 :: [i586] #200 rpm-build-vm-checkinstall: install check OK
i586: rpm-build-vm-createimage=1.70-alt1 post-install unowned files:
/tmp/vm-ext4.img
2024-Aug-19 18:34:20 :: [i586] #200 rpm-build-vm-createimage: install check OK
2024-Aug-19 18:34:20 :: [x86_64] #200 rpm-build-vm-checkinstall: install check OK
2024-Aug-19 18:34:32 :: [i586] #200 rpm-build-vm-run: install check OK
x86_64: rpm-build-vm-createimage=1.70-alt1 post-install unowned files:
/tmp/vm-ext4.img
2024-Aug-19 18:34:41 :: [x86_64] #200 rpm-build-vm-createimage: install check OK
2024-Aug-19 18:34:44 :: [i586] #200 rpm-build-vm-run-debuginfo: install check OK
2024-Aug-19 18:34:48 :: [aarch64] #200 rpm-build-vm-checkinstall: install check OK
2024-Aug-19 18:34:52 :: [x86_64] #200 rpm-build-vm-run: install check OK
2024-Aug-19 18:35:04 :: [x86_64] #200 rpm-build-vm-run-debuginfo: install check OK
aarch64: rpm-build-vm-createimage=1.70-alt1 post-install unowned files:
/tmp/vm-ext4.img
2024-Aug-19 18:35:19 :: [aarch64] #200 rpm-build-vm-createimage: install check OK
2024-Aug-19 18:35:37 :: [aarch64] #200 rpm-build-vm-run: install check OK
2024-Aug-19 18:35:55 :: [aarch64] #200 rpm-build-vm-run-debuginfo: install check OK
2024-Aug-19 18:36:10 :: [ppc64le] #200 rpm-build-vm-checkinstall: install check OK
ppc64le: rpm-build-vm-createimage=1.70-alt1 post-install unowned files:
/tmp/vm-ext4.img
2024-Aug-19 18:36:44 :: [ppc64le] #200 rpm-build-vm-createimage: install check OK
2024-Aug-19 18:37:04 :: [ppc64le] #200 rpm-build-vm-run: install check OK
2024-Aug-19 18:37:25 :: [ppc64le] #200 rpm-build-vm-run-debuginfo: install check OK
2024-Aug-19 18:37:44 :: [x86_64-i586] generated apt indices
2024-Aug-19 18:37:44 :: [x86_64-i586] created next repo
2024-Aug-19 18:37:54 :: [x86_64-i586] dependencies check OK
2024-Aug-19 18:37:56 :: gears inheritance check OK
2024-Aug-19 18:37:56 :: srpm inheritance check OK
girar-check-perms: access to rpm-build-vm ALLOWED for vt: project leader
check-subtask-perms: #200: rpm-build-vm: allowed for vt
2024-Aug-19 18:37:57 :: acl check OK
2024-Aug-19 18:38:19 :: created contents_index files
2024-Aug-19 18:38:28 :: created hash files: aarch64 i586 noarch ppc64le src x86_64
2024-Aug-19 18:38:31 :: task #355560 for sisyphus TESTED
^ permalink raw reply [flat|nested] 3+ messages in thread
* [#355560] DONE (try 3) rpm-build-vm.git=1.70-alt1
2024-08-19 16:40 [#355560] [test-only] FAILED rpm-build-vm.git=1.70-alt1 Girar awaiter (vt)
2024-08-19 18:38 ` [#355560] TESTED (try 2) rpm-build-vm.git=1.70-alt1 Girar awaiter (vt)
@ 2024-08-19 18:40 ` Girar pender (vt)
1 sibling, 0 replies; 3+ messages in thread
From: Girar pender (vt) @ 2024-08-19 18:40 UTC (permalink / raw)
To: Vitaly Chikunov; +Cc: sisyphus-incominger, girar-builder-sisyphus
https://git.altlinux.org/tasks/archive/done/_347/355560/logs/events.3.1.log
2024-Aug-19 18:39:56 :: task #355560 for sisyphus resumed by vt:
girar-check-perms: access to rpm-build-vm ALLOWED for vt: project leader
check-subtask-perms: #200: rpm-build-vm: allowed for vt
2024-Aug-19 18:39:56 :: task is ready for commit
2024-Aug-19 18:40:02 :: repo clone OK
2024-Aug-19 18:40:02 :: packages update OK
2024-Aug-19 18:40:17 :: [x86_64 i586 aarch64 ppc64le noarch] update OK
2024-Aug-19 18:40:17 :: repo update OK
2024-Aug-19 18:40:33 :: repo save OK
2024-Aug-19 18:40:33 :: src index update OK
2024-Aug-19 18:40:34 :: updated /gears/r/rpm-build-vm.git branch `sisyphus'
2024-Aug-19 18:40:40 :: gears update OK
2024-Aug-19 18:40:40 :: task #355560 for sisyphus DONE
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-08-19 18:40 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-08-19 16:40 [#355560] [test-only] FAILED rpm-build-vm.git=1.70-alt1 Girar awaiter (vt)
2024-08-19 18:38 ` [#355560] TESTED (try 2) rpm-build-vm.git=1.70-alt1 Girar awaiter (vt)
2024-08-19 18:40 ` [#355560] DONE (try 3) rpm-build-vm.git=1.70-alt1 Girar pender (vt)
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git