ALT Linux Girar Builder robot reports
 help / color / mirror / Atom feed
* [#355560] [test-only] FAILED rpm-build-vm.git=1.70-alt1
@ 2024-08-19 16:40 Girar awaiter (vt)
  2024-08-19 18:38 ` [#355560] TESTED (try 2) rpm-build-vm.git=1.70-alt1 Girar awaiter (vt)
  2024-08-19 18:40 ` [#355560] DONE (try 3) rpm-build-vm.git=1.70-alt1 Girar pender (vt)
  0 siblings, 2 replies; 3+ messages in thread
From: Girar awaiter (vt) @ 2024-08-19 16:40 UTC (permalink / raw)
  To: Vitaly Chikunov; +Cc: sisyphus-incominger, girar-builder-sisyphus

https://git.altlinux.org/tasks/355560/logs/events.1.1.log

subtask  name          aarch64  i586  ppc64le  x86_64
   #100  rpm-build-vm       48    38       56      37

2024-Aug-19 16:33:12 :: test-only task #355560 for sisyphus started by vt:
#100 build 1.70-alt1 from /people/vt/packages/rpm-build-vm.git fetched at 2024-Aug-19 16:33:10
2024-Aug-19 16:33:14 :: [i586] #100 rpm-build-vm.git 1.70-alt1: build start
2024-Aug-19 16:33:15 :: [aarch64] #100 rpm-build-vm.git 1.70-alt1: build start
2024-Aug-19 16:33:15 :: [x86_64] #100 rpm-build-vm.git 1.70-alt1: build start
2024-Aug-19 16:33:15 :: [ppc64le] #100 rpm-build-vm.git 1.70-alt1: build start
2024-Aug-19 16:33:52 :: [x86_64] #100 rpm-build-vm.git 1.70-alt1: build OK
2024-Aug-19 16:33:52 :: [i586] #100 rpm-build-vm.git 1.70-alt1: build OK
2024-Aug-19 16:34:03 :: [aarch64] #100 rpm-build-vm.git 1.70-alt1: build OK
2024-Aug-19 16:34:11 :: [ppc64le] #100 rpm-build-vm.git 1.70-alt1: build OK
2024-Aug-19 16:34:34 :: #100: rpm-build-vm.git 1.70-alt1: build check OK
2024-Aug-19 16:34:36 :: build check OK
2024-Aug-19 16:34:41 :: noarch check OK
2024-Aug-19 16:34:43 :: plan: src +1 -1 =19743, aarch64 +3 -3 =33663, i586 +3 -3 =33068, noarch +2 -2 =20547, ppc64le +3 -3 =32429, x86_64 +3 -3 =34530
#100 rpm-build-vm 1.69-alt1 -> 1.70-alt1
 Mon Aug 19 2024 Vitaly Chikunov <vt@altlinux> 1.70-alt1
 - In Sisyphus bring latest kernel instead of un-def.
2024-Aug-19 16:35:29 :: patched apt indices
2024-Aug-19 16:35:41 :: created next repo
2024-Aug-19 16:35:51 :: duplicate provides check OK
2024-Aug-19 16:36:31 :: dependencies check OK
nm: /tmp/yYTnhkeVwR/wsoZGabZjf: no symbols
nm: /tmp/BEXCEjTJ42/CoUaHeoEmN: no symbols
nm: /tmp/2jtLSgPP8c/U3wiTkTPad: no symbols
nm: /tmp/hTJInE50p6/oQQ8niVG1B: no symbols
2024-Aug-19 16:36:56 :: [x86_64 i586 aarch64 ppc64le] ELF symbols check OK
2024-Aug-19 16:37:22 :: [x86_64] #100 rpm-build-vm: install check OK
2024-Aug-19 16:37:22 :: [i586] #100 rpm-build-vm: install check OK
2024-Aug-19 16:37:35 :: [aarch64] #100 rpm-build-vm: install check OK
2024-Aug-19 16:37:38 :: [ppc64le] #100 rpm-build-vm: install check OK
	i586: rpm-build-vm-checkinstall=1.70-alt1 install failed:
 <13>Aug 19 16:37:43 rpmi: rpm-build-vm-checkinstall-1.70-alt1 sisyphus+355560.100.1.1 1724085228 installed

 + ls -l /dev/kvm
 crw-rw-rw- 1 root root 10, 232 Aug 19 16:37 /dev/kvm

 + set

 + grep '^LD_'
 LD_LIBRARY_PATH=/usr/lib/libfakeroot:/usr/lib64/libfakeroot:/usr/lib32/libfakeroot
 LD_PRELOAD=libfakeroot.so

 + find /boot

 + /usr/lib/rpm/posttrans-filetriggers /tmp/filelist
 Creating regular file /tmp/vm-ext4.img
 find: '/.out': Permission denied
 find: '/.host': Permission denied
 vm-ext4.img: clean, 12617/104832 files, 154846/418686 blocks

 + rm /tmp/filelist

 + kvm-ok
 KVM is available.

 + timeout 300 vm-run --heredoc
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.6OsrKzXsqB no_timer_check'
 ++ uname -a
 Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:13:23 UTC 2024 i686 GNU/Linux
 ++ echo root '(date)' '(date)'
 root (date) (date)
 1.33user 1.58system 0:01.95elapsed 149%CPU (0avgtext+0avgdata 176688maxresident)k
 0inputs+0outputs (0major+12624minor)pagefaults 0swaps

 + ulimit -v 67108864

 + timeout 60 vm-run date
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.X25X1Kdvbf no_timer_check'
 ++ date
 Mon Aug 19 16:37:50 UTC 2024
 1.31user 1.63system 0:01.99elapsed 148%CPU (0avgtext+0avgdata 165000maxresident)k
 0inputs+0outputs (0major+14160minor)pagefaults 0swaps

 + ulimit -v 33554432

 + timeout 60 vm-run date
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.yjjmQij749 no_timer_check'
 ++ date
 Mon Aug 19 16:37:53 UTC 2024
 1.35user 1.63system 0:01.95elapsed 152%CPU (0avgtext+0avgdata 159340maxresident)k
 0inputs+0outputs (0major+14351minor)pagefaults 0swaps

 + ulimit -v 16777216

 + timeout 60 vm-run date
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.uZSFCv4pu1 no_timer_check'
 ++ date
 Mon Aug 19 16:37:55 UTC 2024
 1.30user 1.49system 0:01.91elapsed 145%CPU (0avgtext+0avgdata 161020maxresident)k
 0inputs+0outputs (0major+14413minor)pagefaults 0swaps

 + ulimit -v 8388608

 + timeout 60 vm-run --maxcpu=8 date
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.i84SORWIKZ no_timer_check'
 ++ date
 Mon Aug 19 16:37:57 UTC 2024
 1.34user 1.69system 0:02.03elapsed 149%CPU (0avgtext+0avgdata 160692maxresident)k
 0inputs+0outputs (0major+14486minor)pagefaults 0swaps

 + ulimit -v 4194304

 + timeout 60 vm-run --maxcpu=2 date
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=2 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.ZfcGlNiGAA no_timer_check'
 ++ date
 Mon Aug 19 16:37:59 UTC 2024
 1.26user 1.22system 0:01.89elapsed 131%CPU (0avgtext+0avgdata 140140maxresident)k
 0inputs+0outputs (0major+14803minor)pagefaults 0swaps

 + timeout 300 vm-run --kvm=cond 'date; date'
 + time qemu-system-i386 -enable-kvm -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.76exK5k7Y8 no_timer_check'
 ++ date
 Mon Aug 19 16:38:01 UTC 2024
 ++ date
 Mon Aug 19 16:38:01 UTC 2024
 1.35user 1.73system 0:02.05elapsed 150%CPU (0avgtext+0avgdata 163084maxresident)k
 0inputs+0outputs (0major+14930minor)pagefaults 0swaps

 + timeout 300 vm-run --kvm=cond echo '(date)' '$USER'
 + time qemu-system-i386 -enable-kvm -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.crXZThBOLt no_timer_check'
 ++ echo '(date)' '$USER'
 (date) $USER
 1.35user 1.76system 0:02.04elapsed 151%CPU (0avgtext+0avgdata 163256maxresident)k
 0inputs+0outputs (0major+14414minor)pagefaults 0swaps

 + type -p busybox
 /bin/busybox

 + timeout 300 vm-run --initrd --append=rddebug 'uname -a; exit 7'
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -device virtio-serial-pci -device virtserialport,chardev=ec,name=exitcode -chardev file,id=ec,path=/tmp/vm.zRetyPOJcc.ret -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 RDSCRIPT=/tmp/vm.zRetyPOJcc rddebug no_timer_check'
 init: vm-run initrd
 init: mount proc to /proc
 init: insmod 'netfs.ko'
 [    0.254251] netfs: FS-Cache loaded
 init: insmod '9pnet.ko'
 [    0.259257] 9pnet: Installing 9P2000 support
 init: insmod '9p.ko'
 [    0.263212] 9p: Installing v9fs 9p2000 file system support
 init: insmod 'virtio_ring.ko'
 init: insmod 'virtio.ko'
 init: insmod '9pnet_virtio.ko'
 init: insmod 'virtio_console.ko'
 init: insmod 'virtio_pci_modern_dev.ko'
 init: insmod 'virtio_pci_legacy_dev.ko'
 init: insmod 'virtio_pci.ko'
 [    0.291329] ACPI: \_SB_.LNKB: Enabled at IRQ 10
 [    0.324922] ACPI: \_SB_.LNKC: Enabled at IRQ 11
 [    0.336846] ACPI: \_SB_.LNKD: Enabled at IRQ 11
 init: mount devtmpfs to dev
 init: mount sysfs to /sys
 init: found exitcode virtio-port: vport0p1 (iter=0)
 init: found /dev/vport0p1 device (iter=0)
 init: run rdscript=/tmp/vm.zRetyPOJcc
 init: exec 'toybox': No such file or directory
 init: try /bin/busybox [sh]
 + uname -a
 Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:13:23 UTC 2024 i686 GNU/Linux
 + exit 7
 init: rdscript exited with status 7
 init: wrote exitcode=7 into /dev/vport0p1
 [    0.346364] ACPI: PM: Preparing to enter system sleep state S5
 [    0.347218] reboot: Power down
 0.99user 0.16system 0:01.12elapsed 103%CPU (0avgtext+0avgdata 156612maxresident)k
 0inputs+0outputs (0major+15365minor)pagefaults 0swaps

 + test 7 -eq 7

 + timeout --preserve-status 300 vm-run 'true; false; true'
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.kzm7FmTyJr no_timer_check'
 ++ true
 ++ false
 1.32user 1.58system 0:01.95elapsed 149%CPU (0avgtext+0avgdata 161060maxresident)k
 0inputs+0outputs (0major+14717minor)pagefaults 0swaps

 + timeout 300 vm-run --mem=max free -g
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.3Mo29J75sZ no_timer_check'
 ++ free -g
                total        used        free      shared  buff/cache   available
 Mem:               1           0           1           0           0           1
 Swap:              0           0           0
 1.32user 1.56system 0:01.97elapsed 146%CPU (0avgtext+0avgdata 160524maxresident)k
 0inputs+0outputs (0major+14545minor)pagefaults 0swaps

 + timeout 300 vm-run --cpu=max lscpu
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=32 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.8odvFp7Zgx no_timer_check'
 ++ lscpu
 Architecture:             i686
   CPU op-mode(s):         32-bit
   Address sizes:          36 bits physical, 0 bits virtual
   Byte Order:             Little Endian
 CPU(s):                   8
   On-line CPU(s) list:    0-7
 Vendor ID:                AuthenticAMD
   BIOS Vendor ID:         QEMU
   Model name:             AMD EPYC 7543 32-Core Processor
     BIOS Model name:      pc-i440fx-9.0  CPU @ 2.0GHz
     BIOS CPU family:      1
     CPU family:           25
     Model:                1
     Thread(s) per core:   1
     Core(s) per socket:   8
     Socket(s):            1
     Stepping:             1
     BogoMIPS:             5600.00
     Flags:                fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge m
                           ca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall
                            nx mmxext fxsr_opt pdpe1gb rdtscp rep_good cpuid extd
                           _apicid tsc_known_freq pni pclmulqdq ssse3 fma cx16 ss
                           e4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes
                            xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy c
                           r8_legacy abm sse4a misalignsse 3dnowprefetch osvw per
                           fctr_core ssbd ibrs ibpb stibp vmmcall fsgsbase tsc_ad
                           just bmi1 avx2 smep bmi2 invpcid rdseed adx smap clflu
                           shopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves clzer
                           o xsaveerptr wbnoinvd arat umip pku vaes vpclmulqdq rd
                           pid arch_capabilities
 Virtualization features:  
   Hypervisor vendor:      KVM
   Virtualization type:    full
 Caches (sum of all):      
   L1d:                    512 KiB (8 instances)
   L1i:                    512 KiB (8 instances)
   L2:                     4 MiB (8 instances)
   L3:                     128 MiB (8 instances)
 Vulnerabilities:          
   Gather data sampling:   Not affected
   Itlb multihit:          Not affected
   L1tf:                   Not affected
   Mds:                    Not affected
   Meltdown:               Not affected
   Mmio stale data:        Not affected
   Reg file data sampling: Not affected
   Retbleed:               Not affected
   Spec rstack overflow:   Vulnerable
   Spec store bypass:      Vulnerable
   Spectre v1:             Vulnerable: __user pointer sanitization and usercopy b
                           arriers only; no swapgs barriers
   Spectre v2:             Vulnerable; IBPB: disabled; STIBP: disabled; PBRSB-eIB
                           RS: Not affected; BHI: Not affected
   Srbds:                  Not affected
   Tsx async abort:        Not affected
 1.44user 1.78system 0:02.14elapsed 150%CPU (0avgtext+0avgdata 162364maxresident)k
 0inputs+0outputs (0major+15025minor)pagefaults 0swaps

 + df -h /tmp
 Filesystem      Size  Used Avail Use% Mounted on
 -                64G  1.3G   63G   2% /

 + timeout 300 vm-run --tmp=max df -h /tmp
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -drive file=/tmp/vm-tmpfs.qcow2 -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.Iz0vOQKvxj no_timer_check'
 ++ df -h /tmp
 Filesystem      Size  Used Avail Use% Mounted on
 tmpfs            32G  4.0K   32G   1% /tmp
 1.41user 1.84system 0:02.05elapsed 157%CPU (0avgtext+0avgdata 187468maxresident)k
 0inputs+0outputs (0major+13450minor)pagefaults 0swaps

 + rm /tmp/vm-tmpfs.qcow2

 + timeout 300 vm-run --verbose --overlay=ext4 uname -a
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.YvEg8NYVIf VERBOSE OVERLAY=ext4 no_timer_check'
 - mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
 - mount -t sysfs -o nosuid,noexec,nodev sys /sys
 - mount -t tmpfs -o size=100% tmpfs /tmp
 - mount -t tmpfs tmpfs /var/log
 - mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
 - mount -t configfs configfs /sys/kernel/config
 - mount -t debugfs debugfs /sys/kernel/debug
 - mount -t securityfs securityfs /sys/kernel/security
 - mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
 - mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
 - ip link set dev lo up
 - modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
 - modprobe virtio-rng
 - truncate -s 11M /usr/src/ext4.0.img
 - /sbin/mkfs.ext4 -q /usr/src/ext4.0.img
 - mount -v -t ext4 -o loop /usr/src/ext4.0.img /mnt/0
 mount: /dev/loop0 mounted on /mnt/0.
 - modprobe overlay
 - mount -v -t overlay -olowerdir=/usr/src,upperdir=/mnt/0/upper,workdir=/mnt/0/work overlay /usr/src
 mount: overlay mounted on /usr/src.
 ++ uname -a
 Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:13:23 UTC 2024 i686 GNU/Linux
 1.45user 2.03system 0:02.16elapsed 161%CPU (0avgtext+0avgdata 168680maxresident)k
 0inputs+0outputs (0major+14457minor)pagefaults 0swaps

 + rmdir /mnt/0

 + rm /usr/src/ext4.0.img

 + timeout 300 vm-run --rootfs --verbose df
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/block/virtio_blk.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -drive file=/tmp/vm-ext4.img,format=raw,if=virtio -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.mQJ6hDAjCh VERBOSE no_timer_check root=UUID=e1b8dde4-b9b3-424f-a2d6-794d65387ac5'
 - mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
 - mount -t sysfs -o nosuid,noexec,nodev sys /sys
 - mount -t 9p -o 9p2000.L,trans=virtio,access=any,msize=262144 virtio-9p:/ /mnt/9p
 - mount --bind /mnt/9p/usr/src /usr/src
 - mount -t tmpfs -o size=100% tmpfs /tmp
 - mount -t tmpfs tmpfs /var/log
 - mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
 - mount -t configfs configfs /sys/kernel/config
 - mount -t debugfs debugfs /sys/kernel/debug
 - mount -t securityfs securityfs /sys/kernel/security
 - mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
 - mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
 - ip link set dev lo up
 - modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
 - modprobe virtio-rng
 ++ df
 Filesystem     1K-blocks    Used Available Use% Mounted on
 /dev/vda         1610720  555364   1038972  35% /
 tmpfs            1024368       4   1024364   1% /run
 virtio-9p:/     67108860 1274112  65834748   2% /mnt/9p
 tmpfs            2048740       0   2048740   0% /tmp
 tmpfs            1024368       0   1024368   0% /var/log
 devtmpfs         1023368       0   1023368   0% /dev
 tmpfs               1024       0      1024   0% /dev/shm
 1.08user 0.23system 0:01.39elapsed 94%CPU (0avgtext+0avgdata 173888maxresident)k
 0inputs+0outputs (0major+15785minor)pagefaults 0swaps

 + rm /tmp/vm-ext4.img

 + timeout 300 vm-run --hvc --no-quiet 'dmesg -r | grep -F "printk: console [hvc0] enabled"'
 + time qemu-system-i386 -M accel=kvm:tcg -smp cores=8 -m 2047 -device virtio-serial-pci -device virtconsole,chardev=con -chardev stdio,mux=on,signal=off,id=con -mon chardev=con -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -cpu max -bios bios.bin -append 'console=hvc0 mitigations=off nokaslr  panic=-1 SCRIPT=/tmp/vm.vs491RXulH no_timer_check'
 [    0.291676] ACPI: \_SB_.LNKC: Enabled at IRQ 11
 [    0.301691] ACPI: \_SB_.LNKD: Enabled at IRQ 11
 [    1.045866] SCSI subsystem initialized
 [    1.069414] scsi host0: ata_piix
 [    1.069644] scsi host1: ata_piix
 [    1.069707] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14 lpm-pol 0
 [    1.069773] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15 lpm-pol 0
 ++ grep -F 'printk: console [hvc0] enabled'
 ++ dmesg -r
 [    1.532926] ACPI: PM: Preparing to enter system sleep state S5
 [    1.533063] reboot: Power down
 1.38user 2.20system 0:02.32elapsed 154%CPU (0avgtext+0avgdata 163720maxresident)k
 0inputs+0outputs (0major+15763minor)pagefaults 0swaps
 error: %post(rpm-build-vm-checkinstall-1.70-alt1.noarch) scriptlet failed, exit status 1
 error: rpm-build-vm-checkinstall-1.70-alt1.noarch: install failed
 hsh-install: Packages installation failed.
2024-Aug-19 16:38:22 :: [i586] #100 rpm-build-vm-checkinstall: install check FAILED
2024-Aug-19 16:38:22 :: [i586] requesting cancellation of task processing
2024-Aug-19 16:38:22 :: [i586] #100 rpm-build-vm-createimage: install check CANCELLED
	x86_64: rpm-build-vm-checkinstall=1.70-alt1 install failed:
 <13>Aug 19 16:37:42 rpmi: rpm-build-vm-checkinstall-1.70-alt1 sisyphus+355560.100.1.1 1724085228 installed

 + ls -l /dev/kvm
 crw-rw-rw- 1 root root 10, 232 Aug 19 16:37 /dev/kvm

 + set

 + grep '^LD_'
 LD_LIBRARY_PATH=/usr/lib64/libfakeroot:/usr/lib64/libfakeroot:/usr/lib32/libfakeroot
 LD_PRELOAD=libfakeroot.so

 + find /boot

 + /usr/lib/rpm/posttrans-filetriggers /tmp/filelist
 Creating regular file /tmp/vm-ext4.img
 find: '/.out': Permission denied
 find: '/.host': Permission denied
 vm-ext4.img: clean, 12812/144000 files, 214298/575667 blocks

 + rm /tmp/filelist

 + kvm-ok

 + timeout 300 vm-run --heredoc
 KVM is available.
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496412 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.fH6i3SKuyN no_timer_check'
 ++ uname -a
 Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:13:25 UTC 2024 x86_64 GNU/Linux
 ++ echo root '(date)' '(date)'
 root (date) (date)
 3.12user 4.02system 0:04.01elapsed 177%CPU (0avgtext+0avgdata 8536184maxresident)k
 0inputs+0outputs (0major+30090minor)pagefaults 0swaps

 + ulimit -v 67108864

 + timeout 60 vm-run date
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 62464 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.WV20sCxF5H no_timer_check'
 ++ date
 Mon Aug 19 16:37:53 UTC 2024
 2.29user 3.15system 0:02.65elapsed 205%CPU (0avgtext+0avgdata 1439160maxresident)k
 0inputs+0outputs (0major+12659minor)pagefaults 0swaps

 + ulimit -v 33554432

 + timeout 60 vm-run date
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 29696 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.fGgVm5ue5E no_timer_check'
 ++ date
 Mon Aug 19 16:37:56 UTC 2024
 2.32user 3.35system 0:02.60elapsed 218%CPU (0avgtext+0avgdata 850632maxresident)k
 0inputs+0outputs (0major+11616minor)pagefaults 0swaps

 + ulimit -v 16777216

 + timeout 60 vm-run date
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 13312 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.6sqJXIoYbl no_timer_check'
 ++ date
 Mon Aug 19 16:37:59 UTC 2024
 2.26user 3.36system 0:02.58elapsed 217%CPU (0avgtext+0avgdata 568656maxresident)k
 0inputs+0outputs (0major+11950minor)pagefaults 0swaps

 + ulimit -v 8388608

 + timeout 60 vm-run --maxcpu=8 date
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=8 -m 7040 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.2TZEZI3J7u no_timer_check'
 ++ date
 Mon Aug 19 16:38:01 UTC 2024
 1.65user 1.55system 0:02.28elapsed 140%CPU (0avgtext+0avgdata 388136maxresident)k
 0inputs+0outputs (0major+11429minor)pagefaults 0swaps

 + ulimit -v 4194304

 + timeout 60 vm-run --maxcpu=2 date
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=2 -m 3424 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.ttA6p9tVvk no_timer_check'
 ++ date
 Mon Aug 19 16:38:04 UTC 2024
 1.57user 1.28system 0:02.19elapsed 130%CPU (0avgtext+0avgdata 217052maxresident)k
 0inputs+0outputs (0major+9896minor)pagefaults 0swaps

 + timeout 300 vm-run --kvm=cond 'date; date'
 + time qemu-system-x86_64 -enable-kvm -smp cores=32 -m 496604 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.NuvY8gb553 no_timer_check'
 ++ date
 Mon Aug 19 16:38:07 UTC 2024
 ++ date
 Mon Aug 19 16:38:07 UTC 2024
 3.06user 3.77system 0:03.91elapsed 174%CPU (0avgtext+0avgdata 8558636maxresident)k
 0inputs+0outputs (0major+27565minor)pagefaults 0swaps

 + timeout 300 vm-run --kvm=cond echo '(date)' '$USER'
 + time qemu-system-x86_64 -enable-kvm -smp cores=32 -m 496512 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.X8BxwNlILH no_timer_check'
 ++ echo '(date)' '$USER'
 (date) $USER
 3.18user 3.73system 0:03.95elapsed 174%CPU (0avgtext+0avgdata 8548728maxresident)k
 0inputs+0outputs (0major+26639minor)pagefaults 0swaps

 + type -p busybox
 /bin/busybox

 + timeout 300 vm-run --initrd --append=rddebug 'uname -a; exit 7'
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496797 -serial mon:stdio -device virtio-serial-pci -device virtserialport,chardev=ec,name=exitcode -chardev file,id=ec,path=/tmp/vm.Nq6ENYeupL.ret -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 RDSCRIPT=/tmp/vm.Nq6ENYeupL rddebug no_timer_check'
 init: vm-run initrd
 init: mount proc to /proc
 init: insmod 'netfs.ko'
 [    1.956028] netfs: FS-Cache loaded
 init: insmod '9pnet.ko'
 [    1.972082] 9pnet: Installing 9P2000 support
 init: insmod '9p.ko'
 [    1.975394] 9p: Installing v9fs 9p2000 file system support
 init: insmod 'virtio_ring.ko'
 init: insmod 'virtio.ko'
 init: insmod '9pnet_virtio.ko'
 init: insmod 'virtio_console.ko'
 init: insmod 'virtio_pci_modern_dev.ko'
 init: insmod 'virtio_pci_legacy_dev.ko'
 init: insmod 'virtio_pci.ko'
 [    2.002365] ACPI: \_SB_.LNKB: Enabled at IRQ 10
 [    2.025662] ACPI: \_SB_.LNKC: Enabled at IRQ 11
 [    2.036139] ACPI: \_SB_.LNKD: Enabled at IRQ 11
 init: mount devtmpfs to dev
 init: mount sysfs to /sys
 init: found exitcode virtio-port: vport0p1 (iter=0)
 init: found /dev/vport0p1 device (iter=0)
 init: run rdscript=/tmp/vm.Nq6ENYeupL
 init: exec 'toybox': No such file or directory
 init: try /bin/busybox [sh]
 + uname -a
 Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:13:25 UTC 2024 x86_64 GNU/Linux
 + exit 7
 init: rdscript exited with status 7
 init: wrote exitcode=7 into /dev/vport0p1
 [    2.049593] ACPI: PM: Preparing to enter system sleep state S5
 [    2.050782] reboot: Power down
 2.74user 2.00system 0:03.13elapsed 151%CPU (0avgtext+0avgdata 8528652maxresident)k
 0inputs+0outputs (0major+28711minor)pagefaults 0swaps

 + test 7 -eq 7

 + timeout --preserve-status 300 vm-run 'true; false; true'
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496681 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.TA25QXjJvI no_timer_check'
 ++ true
 ++ false
 3.01user 3.80system 0:03.88elapsed 175%CPU (0avgtext+0avgdata 8547040maxresident)k
 0inputs+0outputs (0major+27037minor)pagefaults 0swaps

 + timeout 300 vm-run --mem=max free -g
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496558 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.0MkN3FuYQv no_timer_check'
 ++ free -g
                total        used        free      shared  buff/cache   available
 Mem:             477           3         476           0           0         473
 Swap:              0           0           0
 3.11user 3.82system 0:04.00elapsed 173%CPU (0avgtext+0avgdata 8540324maxresident)k
 0inputs+0outputs (0major+27159minor)pagefaults 0swaps

 + timeout 300 vm-run --cpu=max lscpu
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496870 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.WyDPo3DrQx no_timer_check'
 ++ lscpu
 Architecture:             x86_64
   CPU op-mode(s):         32-bit, 64-bit
   Address sizes:          40 bits physical, 48 bits virtual
   Byte Order:             Little Endian
 CPU(s):                   32
   On-line CPU(s) list:    0-31
 Vendor ID:                AuthenticAMD
   BIOS Vendor ID:         QEMU
   Model name:             QEMU Virtual CPU version 2.5+
     BIOS Model name:      pc-i440fx-9.0  CPU @ 2.0GHz
     BIOS CPU family:      1
     CPU family:           15
     Model:                107
     Thread(s) per core:   1
     Core(s) per socket:   32
     Socket(s):            1
     Stepping:             1
     BogoMIPS:             5599.99
     Flags:                fpu de pse tsc msr pae mce cx8 apic sep mtrr pge mca c
                           mov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx 
                           lm rep_good nopl cpuid extd_apicid tsc_known_freq pni 
                           cx16 x2apic hypervisor lahf_lm cmp_legacy 3dnowprefetc
                           h vmmcall
 Virtualization features:  
   Hypervisor vendor:      KVM
   Virtualization type:    full
 Caches (sum of all):      
   L1d:                    2 MiB (32 instances)
   L1i:                    2 MiB (32 instances)
   L2:                     16 MiB (32 instances)
   L3:                     512 MiB (32 instances)
 NUMA:                     
   NUMA node(s):           1
   NUMA node0 CPU(s):      0-31
 Vulnerabilities:          
   Gather data sampling:   Not affected
   Itlb multihit:          Not affected
   L1tf:                   Not affected
   Mds:                    Not affected
   Meltdown:               Not affected
   Mmio stale data:        Not affected
   Reg file data sampling: Not affected
   Retbleed:               Not affected
   Spec rstack overflow:   Not affected
   Spec store bypass:      Not affected
   Spectre v1:             Vulnerable: __user pointer sanitization and usercopy b
                           arriers only; no swapgs barriers
   Spectre v2:             Vulnerable; STIBP: disabled; PBRSB-eIBRS: Not affected
                           ; BHI: Not affected
   Srbds:                  Not affected
   Tsx async abort:        Not affected
 3.22user 3.90system 0:03.98elapsed 179%CPU (0avgtext+0avgdata 8560980maxresident)k
 0inputs+0outputs (0major+26691minor)pagefaults 0swaps

 + df -h /tmp
 Filesystem      Size  Used Avail Use% Mounted on
 -                64G  1.7G   63G   3% /

 + timeout 300 vm-run --tmp=max df -h /tmp
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496759 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -drive file=/tmp/vm-tmpfs.qcow2 -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.SeSD1DvTtX no_timer_check'
 ++ df -h /tmp
 Filesystem      Size  Used Avail Use% Mounted on
 tmpfs            63G  4.0K   63G   1% /tmp
 3.13user 4.10system 0:04.07elapsed 177%CPU (0avgtext+0avgdata 8601492maxresident)k
 0inputs+0outputs (0major+30850minor)pagefaults 0swaps

 + rm /tmp/vm-tmpfs.qcow2

 + timeout 300 vm-run --verbose --overlay=ext4 uname -a
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496340 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.lnm7M5oI1w VERBOSE OVERLAY=ext4 no_timer_check'
 - mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
 - mount -t sysfs -o nosuid,noexec,nodev sys /sys
 - mount -t tmpfs -o size=100% tmpfs /tmp
 - mount -t tmpfs tmpfs /var/log
 - mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
 - mount -t configfs configfs /sys/kernel/config
 - mount -t debugfs debugfs /sys/kernel/debug
 - mount -t securityfs securityfs /sys/kernel/security
 - mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
 - mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
 - ip link set dev lo up
 - modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
 - modprobe virtio-rng
 - truncate -s 11M /usr/src/ext4.0.img
 - /sbin/mkfs.ext4 -q /usr/src/ext4.0.img
 - mount -v -t ext4 -o loop /usr/src/ext4.0.img /mnt/0
 mount: /dev/loop0 mounted on /mnt/0.
 - modprobe overlay
 - mount -v -t overlay -olowerdir=/usr/src,upperdir=/mnt/0/upper,workdir=/mnt/0/work overlay /usr/src
 mount: overlay mounted on /usr/src.
 ++ uname -a
 Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:13:25 UTC 2024 x86_64 GNU/Linux
 3.26user 4.37system 0:04.13elapsed 184%CPU (0avgtext+0avgdata 8556568maxresident)k
 0inputs+0outputs (0major+26524minor)pagefaults 0swaps

 + rmdir /mnt/0

 + rm /usr/src/ext4.0.img

 + timeout 300 vm-run --rootfs --verbose df
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/block/virtio_blk.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496053 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -drive file=/tmp/vm-ext4.img,format=raw,if=virtio -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.yyCT9qyIrp VERBOSE no_timer_check root=UUID=0e1db91a-09b5-48ba-a44a-8ff193586fec'
 - mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
 - mount -t sysfs -o nosuid,noexec,nodev sys /sys
 - mount -t 9p -o 9p2000.L,trans=virtio,access=any,msize=262144 virtio-9p:/ /mnt/9p
 - mount --bind /mnt/9p/usr/src /usr/src
 - mount -t tmpfs -o size=100% tmpfs /tmp
 - mount -t tmpfs tmpfs /var/log
 - mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
 - mount -t configfs configfs /sys/kernel/config
 - mount -t debugfs debugfs /sys/kernel/debug
 - mount -t securityfs securityfs /sys/kernel/security
 - mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
 - mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
 - ip link set dev lo up
 - modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
 - modprobe virtio-rng
 ++ df
 Filesystem     1K-blocks    Used Available Use% Mounted on
 /dev/vda         2194196  748724   1429088  35% /
 tmpfs          249852960       4 249852956   1% /run
 virtio-9p:/     67108860 1685124  65423736   3% /mnt/9p
 tmpfs          499705920       0 499705920   0% /tmp
 tmpfs          249852960       0 249852960   0% /var/log
 devtmpfs       249849108       0 249849108   0% /dev
 tmpfs               1024       0      1024   0% /dev/shm
 3.07user 2.60system 0:03.52elapsed 161%CPU (0avgtext+0avgdata 8575876maxresident)k
 0inputs+0outputs (0major+31737minor)pagefaults 0swaps

 + rm /tmp/vm-ext4.img

 + timeout 300 vm-run --hvc --no-quiet 'dmesg -r | grep -F "printk: console [hvc0] enabled"'
 + time qemu-system-x86_64 -M accel=kvm:tcg -smp cores=32 -m 496583 -device virtio-serial-pci -device virtconsole,chardev=con -chardev stdio,mux=on,signal=off,id=con -mon chardev=con -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=hvc0 mitigations=off nokaslr  panic=-1 SCRIPT=/tmp/vm.YSWYl2xXl0 no_timer_check'
 [    1.962484] ACPI: \_SB_.LNKC: Enabled at IRQ 11
 [    1.972644] ACPI: \_SB_.LNKD: Enabled at IRQ 11
 [    2.626428] SCSI subsystem initialized
 [    2.661493] scsi host0: ata_piix
 [    2.661687] scsi host1: ata_piix
 [    2.661759] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14 lpm-pol 0
 [    2.661845] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15 lpm-pol 0
 [    2.934465] random: crng init done
 ++ dmesg -r
 ++ grep -F 'printk: console [hvc0] enabled'
 [    3.084333] ACPI: PM: Preparing to enter system sleep state S5
 [    3.084513] reboot: Power down
 3.07user 4.27system 0:04.14elapsed 177%CPU (0avgtext+0avgdata 8553032maxresident)k
 0inputs+0outputs (0major+28147minor)pagefaults 0swaps
 error: %post(rpm-build-vm-checkinstall-1.70-alt1.noarch) scriptlet failed, exit status 1
 error: rpm-build-vm-checkinstall-1.70-alt1.noarch: install failed
 hsh-install: Packages installation failed.
2024-Aug-19 16:38:45 :: [x86_64] #100 rpm-build-vm-checkinstall: install check FAILED
	aarch64: rpm-build-vm-checkinstall=1.70-alt1 install failed:
 <13>Aug 19 16:38:05 rpmi: rpm-build-vm-checkinstall-1.70-alt1 sisyphus+355560.100.1.1 1724085228 installed

 + ls -l /dev/kvm
 crw-rw-rw- 1 root root 10, 232 Aug 19 16:38 /dev/kvm

 + set

 + grep '^LD_'
 LD_LIBRARY_PATH=/usr/lib64/libfakeroot:/usr/lib64/libfakeroot:/usr/lib32/libfakeroot
 LD_PRELOAD=libfakeroot.so

 + find /boot

 + /usr/lib/rpm/posttrans-filetriggers /tmp/filelist
 Creating regular file /tmp/vm-ext4.img
 find: '/.out': Permission denied
 find: '/.host': Permission denied
 vm-ext4.img: clean, 13127/162240 files, 193359/648231 blocks

 + rm /tmp/filelist

 + kvm-ok
 KVM is available.

 + timeout 300 vm-run --heredoc
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.H5rTUs1gmp'
 ++ uname -a
 Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:15:46 UTC 2024 aarch64 GNU/Linux
 ++ echo root '(date)' '(date)'
 root (date) (date)
 0.89user 1.78system 0:01.48elapsed 180%CPU (0avgtext+0avgdata 351224maxresident)k
 0inputs+0outputs (0major+8754minor)pagefaults 0swaps

 + ulimit -v 67108864

 + timeout 60 vm-run date
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.U6QWlx6n3F'
 ++ date
 Mon Aug 19 16:38:14 UTC 2024
 0.90user 1.81system 0:01.47elapsed 183%CPU (0avgtext+0avgdata 353276maxresident)k
 0inputs+0outputs (0major+9268minor)pagefaults 0swaps

 + ulimit -v 33554432

 + timeout 60 vm-run date
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.O5cxRVHhu9'
 ++ date
 Mon Aug 19 16:38:16 UTC 2024
 0.90user 1.76system 0:01.47elapsed 180%CPU (0avgtext+0avgdata 355328maxresident)k
 0inputs+0outputs (0major+8758minor)pagefaults 0swaps

 + ulimit -v 16777216

 + timeout 60 vm-run date
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.SQCsSu5M9M'
 ++ date
 Mon Aug 19 16:38:17 UTC 2024
 0.87user 1.66system 0:01.44elapsed 176%CPU (0avgtext+0avgdata 359392maxresident)k
 0inputs+0outputs (0major+8752minor)pagefaults 0swaps

 + ulimit -v 8388608

 + timeout 60 vm-run --maxcpu=8 date
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.8kwvEyz7DO'
 ++ date
 Mon Aug 19 16:38:19 UTC 2024
 0.88user 1.71system 0:01.46elapsed 178%CPU (0avgtext+0avgdata 355272maxresident)k
 0inputs+0outputs (0major+10277minor)pagefaults 0swaps

 + ulimit -v 4194304

 + timeout 60 vm-run --maxcpu=2 date
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=2 -m 3424 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.JufT2UDg7r'
 ++ date
 Mon Aug 19 16:38:21 UTC 2024
 0.83user 1.31system 0:01.23elapsed 174%CPU (0avgtext+0avgdata 312256maxresident)k
 0inputs+0outputs (0major+8253minor)pagefaults 0swaps

 + timeout 300 vm-run --kvm=cond 'date; date'
 + time qemu-system-aarch64 -enable-kvm -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.RfhUskFvsl'
 ++ date
 Mon Aug 19 16:38:22 UTC 2024
 ++ date
 Mon Aug 19 16:38:22 UTC 2024
 0.89user 1.88system 0:01.48elapsed 187%CPU (0avgtext+0avgdata 359400maxresident)k
 0inputs+0outputs (0major+8753minor)pagefaults 0swaps

 + timeout 300 vm-run --kvm=cond echo '(date)' '$USER'
 + time qemu-system-aarch64 -enable-kvm -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.nvG57GyNJR'
 ++ echo '(date)' '$USER'
 (date) $USER
 0.87user 1.69system 0:01.44elapsed 177%CPU (0avgtext+0avgdata 359404maxresident)k
 0inputs+0outputs (0major+8754minor)pagefaults 0swaps

 + type -p busybox
 /bin/busybox

 + timeout 300 vm-run --initrd --append=rddebug 'uname -a; exit 7'
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -device virtio-serial-pci -device virtserialport,chardev=ec,name=exitcode -chardev file,id=ec,path=/tmp/vm.JK31y4YTX9.ret -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 RDSCRIPT=/tmp/vm.JK31y4YTX9 rddebug'
 init: vm-run initrd
 init: mount proc to /proc
 init: insmod 'netfs.ko'
 [    0.301119] netfs: FS-Cache loaded
 init: insmod '9pnet.ko'
 [    0.305238] 9pnet: Installing 9P2000 support
 init: insmod '9p.ko'
 [    0.308294] 9p: Installing v9fs 9p2000 file system support
 init: insmod 'virtio_ring.ko'
 init: insmod 'virtio.ko'
 init: insmod '9pnet_virtio.ko'
 init: insmod 'virtio_console.ko'
 init: insmod 'virtio_pci_modern_dev.ko'
 init: insmod 'virtio_pci_legacy_dev.ko'
 init: insmod 'virtio_pci.ko'
 [    0.319551] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)
 [    0.349374] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003)
 [    0.353173] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003)
 init: mount devtmpfs to dev
 init: mount sysfs to /sys
 init: found exitcode virtio-port: vport0p1 (iter=0)
 init: found /dev/vport0p1 device (iter=0)
 init: run rdscript=/tmp/vm.JK31y4YTX9
 init: exec 'toybox': No such file or directory
 init: try /bin/busybox [sh]
 + uname -a
 Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:15:46 UTC 2024 aarch64 GNU/Linux
 + exit 7
 init: rdscript exited with status 7
 init: wrote exitcode=7 into /dev/vport0p1
 [    0.365792] reboot: Power down
 0.45user 0.40system 0:00.79elapsed 107%CPU (0avgtext+0avgdata 348136maxresident)k
 0inputs+0outputs (0major+9958minor)pagefaults 0swaps

 + test 7 -eq 7

 + timeout --preserve-status 300 vm-run 'true; false; true'
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.TZ0RZHwDsi'
 ++ true
 ++ false
 0.89user 1.79system 0:01.47elapsed 181%CPU (0avgtext+0avgdata 357348maxresident)k
 0inputs+0outputs (0major+8753minor)pagefaults 0swaps

 + timeout 300 vm-run --mem=max free -g
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 273532 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.Y3znGgxLMl'
 ++ free -g
                total        used        free      shared  buff/cache   available
 Mem:             262           1         262           0           0         260
 Swap:              0           0           0
 2.22user 7.77system 0:08.59elapsed 116%CPU (0avgtext+0avgdata 5459948maxresident)k
 0inputs+0outputs (0major+18196minor)pagefaults 0swaps

 + timeout 300 vm-run --cpu=max lscpu
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=24 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.vPzFFdVpDi'
 ++ lscpu
 Architecture:             aarch64
   CPU op-mode(s):         64-bit
   Byte Order:             Little Endian
 CPU(s):                   24
   On-line CPU(s) list:    0-23
 Vendor ID:                HiSilicon
   Model name:             Kunpeng-920
     Model:                0
     Thread(s) per core:   1
     Core(s) per cluster:  24
     Socket(s):            -
     Cluster(s):           1
     Stepping:             0x1
     BogoMIPS:             200.00
     Flags:                fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fph
                           p asimdhp cpuid asimdrdm jscvt fcma dcpop asimddp asim
                           dfhm
 NUMA:                     
   NUMA node(s):           1
   NUMA node0 CPU(s):      0-23
 Vulnerabilities:          
   Gather data sampling:   Not affected
   Itlb multihit:          Not affected
   L1tf:                   Not affected
   Mds:                    Not affected
   Meltdown:               Not affected
   Mmio stale data:        Not affected
   Reg file data sampling: Not affected
   Retbleed:               Not affected
   Spec rstack overflow:   Not affected
   Spec store bypass:      Vulnerable
   Spectre v1:             Mitigation; __user pointer sanitization
   Spectre v2:             Not affected
   Srbds:                  Not affected
   Tsx async abort:        Not affected
 1.00user 2.57system 0:02.06elapsed 173%CPU (0avgtext+0avgdata 399632maxresident)k
 0inputs+0outputs (0major+10156minor)pagefaults 0swaps

 + df -h /tmp
 Filesystem      Size  Used Avail Use% Mounted on
 -                64G  1.7G   63G   3% /

 + timeout 300 vm-run --tmp=max df -h /tmp
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -drive file=/tmp/vm-tmpfs.qcow2 -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.1Y03hbCEcR'
 ++ df -h /tmp
 Filesystem      Size  Used Avail Use% Mounted on
 tmpfs            63G  4.0K   63G   1% /tmp
 0.95user 2.01system 0:01.61elapsed 183%CPU (0avgtext+0avgdata 407096maxresident)k
 0inputs+0outputs (0major+9735minor)pagefaults 0swaps

 + rm /tmp/vm-tmpfs.qcow2

 + timeout 300 vm-run --verbose --overlay=ext4 uname -a
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.7289VLGTXX VERBOSE OVERLAY=ext4'
 - mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
 - mount -t sysfs -o nosuid,noexec,nodev sys /sys
 - mount -t tmpfs -o size=100% tmpfs /tmp
 - mount -t tmpfs tmpfs /var/log
 - mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
 - mount -t configfs configfs /sys/kernel/config
 - mount -t debugfs debugfs /sys/kernel/debug
 - mount -t securityfs securityfs /sys/kernel/security
 - mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
 - mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
 - ip link set dev lo up
 - modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
 - modprobe virtio-rng
 - truncate -s 11M /usr/src/ext4.0.img
 - /sbin/mkfs.ext4 -q /usr/src/ext4.0.img
 - mount -v -t ext4 -o loop /usr/src/ext4.0.img /mnt/0
 mount: /dev/loop0 mounted on /mnt/0.
 - modprobe overlay
 - mount -v -t overlay -olowerdir=/usr/src,upperdir=/mnt/0/upper,workdir=/mnt/0/work overlay /usr/src
 mount: overlay mounted on /usr/src.
 ++ uname -a
 Linux (none) 6.10.6-6.10-alt1 #1 SMP PREEMPT_DYNAMIC Mon Aug 19 06:15:46 UTC 2024 aarch64 GNU/Linux
 1.04user 2.29system 0:01.70elapsed 194%CPU (0avgtext+0avgdata 359388maxresident)k
 0inputs+0outputs (0major+8760minor)pagefaults 0swaps

 + rmdir /mnt/0

 + rm /usr/src/ext4.0.img

 + timeout 300 vm-run --rootfs --verbose df
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/block/virtio_blk.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -drive file=/tmp/vm-ext4.img,format=raw,if=virtio -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.yjWtTojiFL VERBOSE root=UUID=3cc6b73a-3fbf-4917-bce1-eae134b1eea7'
 - mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
 - mount -t sysfs -o nosuid,noexec,nodev sys /sys
 - mount -t 9p -o 9p2000.L,trans=virtio,access=any,msize=262144 virtio-9p:/ /mnt/9p
 - mount --bind /mnt/9p/usr/src /usr/src
 - mount -t tmpfs -o size=100% tmpfs /tmp
 - mount -t tmpfs tmpfs /var/log
 - mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
 - mount -t configfs configfs /sys/kernel/config
 - mount -t debugfs debugfs /sys/kernel/debug
 - mount -t securityfs securityfs /sys/kernel/security
 - mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
 - mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
 - ip link set dev lo up
 - modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
 - modprobe virtio-rng
 ++ df
 Filesystem     1K-blocks    Used Available Use% Mounted on
 /dev/vda         2479036  659552   1803100  27% /
 tmpfs            2005744       4   2005740   1% /run
 virtio-9p:/     67108860 1689912  65418948   3% /mnt/9p
 tmpfs            4011492       0   4011492   0% /tmp
 tmpfs            2005744       0   2005744   0% /var/log
 devtmpfs         1870572       0   1870572   0% /dev
 tmpfs               1024       0      1024   0% /dev/shm
 0.57user 0.48system 0:00.91elapsed 115%CPU (0avgtext+0avgdata 380432maxresident)k
 0inputs+0outputs (0major+9194minor)pagefaults 0swaps

 + rm /tmp/vm-ext4.img

 + timeout 300 vm-run --hvc --no-quiet 'dmesg -r | grep -F "printk: console [hvc0] enabled"'
 + time qemu-system-aarch64 -M accel=kvm:tcg -smp cores=8 -m 4096 -device virtio-serial-pci -device virtconsole,chardev=con -chardev stdio,mux=on,signal=off,id=con -mon chardev=con -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -append 'console=hvc0 mitigations=off nokaslr  panic=-1 SCRIPT=/tmp/vm.N0Vc5O5d7c'
 [    1.120398] SCSI subsystem initialized
 ++ dmesg -r
 ++ grep -F 'printk: console [hvc0] enabled'
 [    1.441572] reboot: Power down
 0.93user 2.74system 0:01.87elapsed 197%CPU (0avgtext+0avgdata 366496maxresident)k
 0inputs+0outputs (0major+9689minor)pagefaults 0swaps
 error: %post(rpm-build-vm-checkinstall-1.70-alt1.noarch) scriptlet failed, exit status 1
 error: rpm-build-vm-checkinstall-1.70-alt1.noarch: install failed
 hsh-install: Packages installation failed.
2024-Aug-19 16:38:45 :: [aarch64] #100 rpm-build-vm-checkinstall: install check FAILED
2024-Aug-19 16:38:45 :: [x86_64] #100 rpm-build-vm-createimage: install check CANCELLED
2024-Aug-19 16:38:45 :: [aarch64] #100 rpm-build-vm-createimage: install check CANCELLED
	ppc64le: rpm-build-vm-checkinstall=1.70-alt1 install failed:
 <13>Aug 19 16:38:12 rpmi: rpm-build-vm-checkinstall-1.70-alt1 sisyphus+355560.100.1.1 1724085228 installed

 + ls -l /dev/kvm
 crw-rw-rw- 1 root root 10, 232 Aug 19 16:38 /dev/kvm

 + set

 + grep '^LD_'
 LD_LIBRARY_PATH=/usr/lib64/libfakeroot:/usr/lib64/libfakeroot:/usr/lib32/libfakeroot
 LD_PRELOAD=libfakeroot.so

 + find /boot

 + /usr/lib/rpm/posttrans-filetriggers /tmp/filelist
 Creating regular file /tmp/vm-ext4.img
 find: '/.out': Permission denied
 find: '/.host': Permission denied
 vm-ext4.img: clean, 11779/202400 files, 192140/808128 blocks

 + rm /tmp/filelist

 + kvm-ok
 KVM is available.

 + timeout 300 vm-run --heredoc
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.wBaKdkpR1W'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.wBaKdkpR1W
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 0000000800000000
   rmo_top      : 0000000030000000
   ram_top      : 0000000800000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1++ uname -a
 Linux (none) 6.10.6-6.10-alt1 #1 SMP Mon Aug 19 06:14:13 UTC 2024 ppc64le GNU/Linux
 ++ echo root '(date)' '(date)'
 root (date) (date)
 5.33user 1.00system 0:06.01elapsed 105%CPU (0avgtext+0avgdata 501952maxresident)k
 0inputs+0outputs (0major+2273minor)pagefaults 0swaps

 + ulimit -v 67108864

 + timeout 60 vm-run date
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.dFNkdQ9QeB'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.dFNkdQ9QeB
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 0000000800000000
   rmo_top      : 0000000030000000
   ram_top      : 0000000800000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1++ date
 Mon Aug 19 16:38:29 UTC 2024
 5.32user 1.07system 0:06.06elapsed 105%CPU (0avgtext+0avgdata 485568maxresident)k
 0inputs+0outputs (0major+2271minor)pagefaults 0swaps

 + ulimit -v 33554432

 + timeout 60 vm-run date
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 31488 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.vbL1HoaPdJ'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.vbL1HoaPdJ
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 00000007b0000000
   rmo_top      : 0000000030000000
   ram_top      : 00000007b0000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1++ date
 Mon Aug 19 16:38:35 UTC 2024
 5.34user 0.98system 0:06.01elapsed 105%CPU (0avgtext+0avgdata 485504maxresident)k
 0inputs+0outputs (0major+2271minor)pagefaults 0swaps

 + ulimit -v 16777216

 + timeout 60 vm-run date
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 15104 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.eUXJuvdAxi'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.eUXJuvdAxi
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 00000003b0000000
   rmo_top      : 0000000030000000
   ram_top      : 00000003b0000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1++ date
 Mon Aug 19 16:38:42 UTC 2024
 5.11user 0.87system 0:05.63elapsed 106%CPU (0avgtext+0avgdata 465472maxresident)k
 0inputs+0outputs (0major+2220minor)pagefaults 0swaps

 + ulimit -v 8388608

 + timeout 60 vm-run --maxcpu=8 date
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 6912 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.LDY1eFaB18'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.LDY1eFaB18
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 00000001b0000000
   rmo_top      : 0000000030000000
   ram_top      : 00000001b0000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1++ date
 Mon Aug 19 16:38:48 UTC 2024
 4.98user 0.78system 0:05.44elapsed 106%CPU (0avgtext+0avgdata 433472maxresident)k
 0inputs+0outputs (0major+2223minor)pagefaults 0swaps

 + ulimit -v 4194304

 + timeout 60 vm-run --maxcpu=2 date
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=2 -m 3328 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.vZEvA978ei'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.vZEvA978ei
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 00000000d0000000
   rmo_top      : 0000000030000000
   ram_top      : 00000000d0000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1++ date
 Mon Aug 19 16:38:53 UTC 2024
 4.62user 0.79system 0:05.06elapsed 106%CPU (0avgtext+0avgdata 316224maxresident)k
 0inputs+0outputs (0major+2179minor)pagefaults 0swaps

 + timeout 300 vm-run --kvm=cond 'date; date'
 + time qemu-system-ppc64 -enable-kvm -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.EueXYB8BNs'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.EueXYB8BNs
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 0000000800000000
   rmo_top      : 0000000030000000
   ram_top      : 0000000800000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1++ date
 Mon Aug 19 16:38:59 UTC 2024
 ++ date
 Mon Aug 19 16:38:59 UTC 2024
 5.27user 1.00system 0:05.93elapsed 105%CPU (0avgtext+0avgdata 501824maxresident)k
 0inputs+0outputs (0major+2306minor)pagefaults 0swaps

 + timeout 300 vm-run --kvm=cond echo '(date)' '$USER'
 + time qemu-system-ppc64 -enable-kvm -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.VFDkTKNCeW'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.VFDkTKNCeW
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 0000000800000000
   rmo_top      : 0000000030000000
   ram_top      : 0000000800000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1++ echo '(date)' '$USER'
 (date) $USER
 5.27user 0.97system 0:05.91elapsed 105%CPU (0avgtext+0avgdata 484160maxresident)k
 0inputs+0outputs (0major+2286minor)pagefaults 0swaps

 + type -p busybox
 /bin/busybox

 + timeout 300 vm-run --initrd --append=rddebug 'uname -a; exit 7'
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -device virtio-serial-pci -device virtserialport,chardev=ec,name=exitcode -chardev file,id=ec,path=/tmp/vm.srBeDykHdX.ret -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 RDSCRIPT=/tmp/vm.srBeDykHdX rddebug'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1003    virtio [ serial ]
                      00 0800 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@1
                      00 1000 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 RDSCRIPT=/tmp/vm.srBeDykHdX rddebug
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002b70000
   alloc_top    : 0000000030000000
   alloc_top_hi : 0000000800000000
   rmo_top      : 0000000030000000
   ram_top      : 0000000800000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002b80000 -> 0x0000000002b80b26
 Device tree struct  0x0000000002b90000 -> 0x0000000002ba0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1init: vm-run initrd
 init: mount proc to /proc
 init: insmod 'netfs.ko'
 [    0.243493] netfs: FS-Cache loaded
 init: insmod '9pnet.ko'
 [    0.248524] 9pnet: Installing 9P2000 support
 init: insmod '9p.ko'
 [    0.251572] 9p: Installing v9fs 9p2000 file system support
 init: insmod 'virtio_ring.ko'
 init: insmod 'virtio.ko'
 init: insmod '9pnet_virtio.ko'
 init: insmod 'virtio_console.ko'
 init: insmod 'virtio_pci_modern_dev.ko'
 init: insmod 'virtio_pci_legacy_dev.ko'
 init: insmod 'virtio_pci.ko'
 [    0.261924] virtio-pci 0000:00:00.0: enabling device (0100 -> 0103)
 [    0.262939] virtio-pci 0000:00:00.0: ibm,query-pe-dma-windows(2026) 0 8000000 20000000 returned 0, lb=2000000000 ps=107 wn=1
 [    0.263274] virtio-pci 0000:00:00.0: ibm,create-pe-dma-window(2027) 0 8000000 20000000 18 23 returned 0 (liobn = 0x80000001 starting addr = 8000000 0)
 [    0.308777] virtio-pci 0000:00:02.0: enabling device (0100 -> 0103)
 [    0.310937] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
 init: mount devtmpfs to dev
 init: mount sysfs to /sys
 init: found exitcode virtio-port: vport0p1 (iter=0)
 init: found /dev/vport0p1 device (iter=0)
 init: run rdscript=/tmp/vm.srBeDykHdX
 init: exec 'toybox': No such file or directory
 init: try /bin/busybox [sh]
 + uname -a
 Linux (none) 6.10.6-6.10-alt1 #1 SMP Mon Aug 19 06:14:13 UTC 2024 ppc64le GNU/Linux
 + exit 7
 init: rdscript exited with status 7
 init: wrote exitcode=7 into /dev/vport0p1
 [    0.320275] reboot: Power down
 4.49user 0.41system 0:04.86elapsed 101%CPU (0avgtext+0avgdata 458368maxresident)k
 0inputs+0outputs (0major+2335minor)pagefaults 0swaps

 + test 7 -eq 7

 + timeout --preserve-status 300 vm-run 'true; false; true'
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.BLsJJcjCMI'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.BLsJJcjCMI
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 0000000800000000
   rmo_top      : 0000000030000000
   ram_top      : 0000000800000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1++ true
 ++ false
 5.26user 0.97system 0:05.89elapsed 105%CPU (0avgtext+0avgdata 451328maxresident)k
 0inputs+0outputs (0major+2252minor)pagefaults 0swaps

 + timeout 300 vm-run --mem=max free -g
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 487168 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.TyyN3zPH6y'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.TyyN3zPH6y
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 00000076f0000000
   rmo_top      : 0000000030000000
   ram_top      : 00000076f0000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1++ free -g
                total        used        free      shared  buff/cache   available
 Mem:             475           1         474           0           0         473
 Swap:              0           0           0
 12.08user 4.58system 0:16.36elapsed 101%CPU (0avgtext+0avgdata 1161536maxresident)k
 0inputs+0outputs (0major+3143minor)pagefaults 0swaps

 + timeout 300 vm-run --cpu=max lscpu
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=43 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.5ceVJKvBS0'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.5ceVJKvBS0
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 0000000800000000
   rmo_top      : 0000000030000000
   ram_top      : 0000000800000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1++ lscpu
 Architecture:             ppc64le
   Byte Order:             Little Endian
 CPU(s):                   43
   On-line CPU(s) list:    0-42
 Model name:               POWER8 (architected), altivec supported
   Model:                  2.0 (pvr 004d 0200)
   Thread(s) per core:     1
   Core(s) per socket:     43
   Socket(s):              1
 Virtualization features:  
   Hypervisor vendor:      KVM
   Virtualization type:    para
 Caches (sum of all):      
   L1d:                    1.3 MiB (43 instances)
   L1i:                    1.3 MiB (43 instances)
 NUMA:                     
   NUMA node(s):           1
   NUMA node0 CPU(s):      0-42
 Vulnerabilities:          
   Gather data sampling:   Not affected
   Itlb multihit:          Not affected
   L1tf:                   Vulnerable
   Mds:                    Not affected
   Meltdown:               Vulnerable
   Mmio stale data:        Not affected
   Reg file data sampling: Not affected
   Retbleed:               Not affected
   Spec rstack overflow:   Not affected
   Spec store bypass:      Vulnerable
   Spectre v1:             Vulnerable
   Spectre v2:             Vulnerable
   Srbds:                  Not affected
   Tsx async abort:        Not affected
 6.67user 1.16system 0:07.05elapsed 111%CPU (0avgtext+0avgdata 711680maxresident)k
 0inputs+0outputs (0major+2455minor)pagefaults 0swaps

 + df -h /tmp
 Filesystem      Size  Used Avail Use% Mounted on
 -                64G  1.8G   63G   3% /

 + timeout 300 vm-run --tmp=max df -h /tmp
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -drive file=/tmp/vm-tmpfs.qcow2 -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.cxtZ9sNDx4'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 Populating /vdevice/v-scsi@71000002
        SCSI: Looking for devices
           8000000000000000 DISK     : "QEMU     QEMU HARDDISK    2.5+"
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.cxtZ9sNDx4
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 0000000800000000
   rmo_top      : 0000000030000000
   ram_top      : 0000000800000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b3b
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1++ df -h /tmp
 Filesystem      Size  Used Avail Use% Mounted on
 tmpfs            32G   64K   32G   1% /tmp
 5.96user 1.04system 0:06.67elapsed 105%CPU (0avgtext+0avgdata 470400maxresident)k
 0inputs+0outputs (0major+2342minor)pagefaults 0swaps

 + rm /tmp/vm-tmpfs.qcow2

 + timeout 300 vm-run --verbose --overlay=ext4 uname -a
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.VYCbm2ioFv VERBOSE OVERLAY=ext4'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.VYCbm2ioFv VERBOSE OVERLAY=ext4
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 0000000800000000
   rmo_top      : 0000000030000000
   ram_top      : 0000000800000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b1f
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1- mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
 - mount -t sysfs -o nosuid,noexec,nodev sys /sys
 - mount -t tmpfs -o size=100% tmpfs /tmp
 - mount -t tmpfs tmpfs /var/log
 - mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
 - mount -t configfs configfs /sys/kernel/config
 - mount -t debugfs debugfs /sys/kernel/debug
 - mount -t securityfs securityfs /sys/kernel/security
 - mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
 - mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
 - ip link set dev lo up
 - modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
 - modprobe virtio-rng
 - truncate -s 11M /usr/src/ext4.0.img
 - /sbin/mkfs.ext4 -q /usr/src/ext4.0.img
 - mount -v -t ext4 -o loop /usr/src/ext4.0.img /mnt/0
 mount: /dev/loop0 mounted on /mnt/0.
 - modprobe overlay
 - mount -v -t overlay -olowerdir=/usr/src,upperdir=/mnt/0/upper,workdir=/mnt/0/work overlay /usr/src
 mount: overlay mounted on /usr/src.
 ++ uname -a
 Linux (none) 6.10.6-6.10-alt1 #1 SMP Mon Aug 19 06:14:13 UTC 2024 ppc64le GNU/Linux
 5.64user 1.34system 0:06.55elapsed 106%CPU (0avgtext+0avgdata 501824maxresident)k
 0inputs+0outputs (0major+2272minor)pagefaults 0swaps

 + rmdir /mnt/0

 + rm /usr/src/ext4.0.img

 + timeout 300 vm-run --rootfs --verbose df
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_ring.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/block/virtio_blk.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/netfs/netfs.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/fs/9p/9p.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/net/9p/9pnet_virtio.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_modern_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci_legacy_dev.ko
 initrd: Adding module /lib/modules/6.10.6-6.10-alt1/kernel/drivers/virtio/virtio_pci.ko
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -drive file=/tmp/vm-ext4.img,format=raw,if=virtio -append 'console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.8Cm8vaD3sL VERBOSE root=UUID=862e2917-0eab-4d7f-a74c-7b93e59ab384'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/

 
 SLOF^[[0m^[[?25l **********************************************************************
 ^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:48
  FW Version = git-3a259df2449fc4a4
  Press "s" to enter Open Firmware.\r
 \r
 ^[[0m^[[?25hC0000\rC0100\rC0120\rC0140\rC0200\rC0240\rC0260\rC02E0\rC0300\rC0320\rC0340\rC0360\rC0370\rC0380\rC0371\rC0373\rC0374\rC03F0\rC0400\rC0480\rC04C0\rC04D0\rC0500\rPopulating /vdevice methods
 Populating /vdevice/vty@71000000
 Populating /vdevice/nvram@71000001
 C05A0\rPopulating /pci@800000020000000
                      00 0000 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@0
                      00 0800 (D) : 1af4 1005    legacy-device*
                      00 1000 (D) : 1af4 1001    virtio [ block ]
 C0600\rC06C0\rC0700\rC0800\rC0880\rNo NVRAM common partition, re-initializing...
 C0890\rC08A0\rC08A8\rC08B0\rScanning USB 
 C08C0\rC08D0\rUsing default console: /vdevice/vty@71000000
 C08E0\rC08E8\rDetected RAM kernel at 400000 (25702d0 bytes) 
 C08FF\r     
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /vdevice/vty@71000000
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/vm.8Cm8vaD3sL VERBOSE root=UUID=862e2917-0eab-4d7f-a74c-7b93e59ab384
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 0000000800000000
   rmo_top      : 0000000030000000
   ram_top      : 0000000800000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b24
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 Quiescing Open Firmware ...
 Booting Linux via __start() @ 0x0000000000400000 ...
 \rLinux ppc64le
 #1 SMP Mon Aug 1- mount -n -t tmpfs -o mode=755,nodev,nosuid,strictatime tmpfs /run
 - mount -t sysfs -o nosuid,noexec,nodev sys /sys
 - mount -t 9p -o 9p2000.L,trans=virtio,access=any,msize=262144 virtio-9p:/ /mnt/9p
 - mount --bind /mnt/9p/usr/src /usr/src
 - mount -t tmpfs -o size=100% tmpfs /tmp
 - mount -t tmpfs tmpfs /var/log
 - mount -t devtmpfs -o mode=0755,nosuid,noexec devtmpfs /dev
 - mount -t configfs configfs /sys/kernel/config
 - mount -t debugfs debugfs /sys/kernel/debug
 - mount -t securityfs securityfs /sys/kernel/security
 - mount -t devpts -o gid=tty,mode=620,noexec,nosuid devpts /dev/pts
 - mount -t tmpfs -o mode=1777,size=1M,noexec,nosuid,nodev tmpfs /dev/shm
 - ip link set dev lo up
 - modprobe --quiet --all virtio_blk scsi_mod ata_piix pata_acpi ata_generic sd_mod virtio_net
 - modprobe virtio-rng
 ++ df
 Filesystem     1K-blocks    Used Available Use% Mounted on
 /dev/vda         3106672  642724   2447564  21% /
 tmpfs           16716224      64  16716160   1% /run
 virtio-9p:/     67108800 1884672  65224128   3% /mnt/9p
 tmpfs           33432512       0  33432512   0% /tmp
 tmpfs           16716224       0  16716224   0% /var/log
 devtmpfs        16712832       0  16712832   0% /dev
 tmpfs               1024       0      1024   0% /dev/shm
 4.69user 0.47system 0:05.05elapsed 102%CPU (0avgtext+0avgdata 521344maxresident)k
 0inputs+0outputs (0major+2353minor)pagefaults 0swaps

 + rm /tmp/vm-ext4.img

 + timeout 300 vm-run --hvc --no-quiet 'dmesg -r | grep -F "printk: console [hvc0] enabled"'
 + time qemu-system-ppc64 -M accel=kvm:tcg -smp cores=8 -m 32768 -device virtio-serial-pci -device virtconsole,chardev=con -chardev stdio,mux=on,signal=off,id=con -mon chardev=con -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.10.6-6.10-alt1 -initrd /tmp/initramfs-6.10.6-6.10-alt1.img -sandbox on,spawn=deny -M cap-ibs=broken,cap-cfpc=broken,cap-sbbc=broken -cpu power8 -M kvm-type=HV,cap-ccf-assist=off -append 'console=hvc0 mitigations=off nokaslr  panic=-1 SCRIPT=/tmp/vm.b1USezNnCf'
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 SLOF **********************************************************************
 ^[[0m^[[?25l^[[1mQEMU Starting
 ^[[0m Build Date = Sep 18 2023 18:57:51
  FW Version = git-3a259df2449fc4a4
 \0\0\0Press 's' to enter Open Firmware.
 
 Populating /vdevice methods
 Populating /vdevice/nvram@71000000
 Populating /pci@800000020000000
                      00 0000 (D) : 1af4 1003    virtio [ serial ]
                      00 0800 (D) : 1af4 1009    virtio [ network ]
 Populating /pci@800000020000000/virtio-9p@1
                      00 1000 (D) : 1af4 1005    legacy-device*
 No NVRAM common partition, re-initializing...
 Scanning USB 
 No console specified using vsterm
 Detected RAM kernel at 400000 (25702d0 bytes) 
      
   Welcome to Open Firmware
 
   Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
   This program and the accompanying materials are made available
   under the terms of the BSD License available at
   http://www.opensource.org/licenses/bsd-license.php
 
 Booting from memory...
 OF stdout device is: /pci@800000020000000/communication-controller@0
 Preparing to boot Linux version 6.10.6-6.10-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt4), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP Mon Aug 19 06:14:13 UTC 2024
 Detected machine type: 0000000000000101
 command line: console=hvc0 mitigations=off nokaslr  panic=-1 SCRIPT=/tmp/vm.b1USezNnCf
 Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
 Calling ibm,client-architecture-support...Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
 Can't open directory /proc/device-tree/cpus/
  done
 memory layout at init:
   memory_limit : 0000000000000000 (16 MB aligned)
   alloc_bottom : 0000000002a80000
   alloc_top    : 0000000030000000
   alloc_top_hi : 0000000800000000
   rmo_top      : 0000000030000000
   ram_top      : 0000000800000000
 instantiating rtas at 0x000000002fff0000... done
 prom_hold_cpus: skipped
 copying OF device tree...
 Building dt strings...
 Building dt structure...
 Device tree strings 0x0000000002a90000 -> 0x0000000002a90b13
 Device tree struct  0x0000000002aa0000 -> 0x0000000002ab0000
 [    1.441893] SCSI subsystem initialized
 ++ dmesg -r
 ++ grep -F 'printk: console [hvc0] enabled'
 [    1.985792] reboot: Power down
 5.56user 1.75system 0:06.64elapsed 110%CPU (0avgtext+0avgdata 489344maxresident)k
 0inputs+0outputs (0major+2344minor)pagefaults 0swaps
 error: %post(rpm-build-vm-checkinstall-1.70-alt1.noarch) scriptlet failed, exit status 1
 error: rpm-build-vm-checkinstall-1.70-alt1.noarch: install failed
 hsh-install: Packages installation failed.
2024-Aug-19 16:40:09 :: [ppc64le] #100 rpm-build-vm-checkinstall: install check FAILED
2024-Aug-19 16:40:09 :: [ppc64le] #100 rpm-build-vm-createimage: install check CANCELLED
2024-Aug-19 16:38:23 :: [i586] install check FAILED
2024-Aug-19 16:38:46 :: [x86_64] install check FAILED
2024-Aug-19 16:38:46 :: [aarch64] install check FAILED
2024-Aug-19 16:40:09 :: [ppc64le] install check FAILED
2024-Aug-19 16:40:10 :: task #355560 for sisyphus FAILED


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2024-08-19 18:40 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-08-19 16:40 [#355560] [test-only] FAILED rpm-build-vm.git=1.70-alt1 Girar awaiter (vt)
2024-08-19 18:38 ` [#355560] TESTED (try 2) rpm-build-vm.git=1.70-alt1 Girar awaiter (vt)
2024-08-19 18:40 ` [#355560] DONE (try 3) rpm-build-vm.git=1.70-alt1 Girar pender (vt)

ALT Linux Girar Builder robot reports

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
		sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
	public-inbox-index sisyphus-incominger

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git