* [#345892] [test-only] FAILED linuxcnc.git=2.9.2-alt3.20240203
@ 2024-04-26 18:16 Girar awaiter (antohami)
2024-04-26 18:56 ` [#345892] TESTED (try 2) linuxcnc.git=2.9.2-alt4.20240203 Girar awaiter (antohami)
2024-04-26 19:04 ` [#345892] DONE (try 3) linuxcnc.git=2.9.2-alt4.20240203 Girar pender (antohami)
0 siblings, 2 replies; 3+ messages in thread
From: Girar awaiter (antohami) @ 2024-04-26 18:16 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger, girar-builder-sisyphus
https://git.altlinux.org/tasks/345892/logs/events.1.1.log
subtask name aarch64 i586 ppc64le x86_64
#100 linuxcnc 5:19 3:53 - 3:38
2024-Apr-26 18:11:20 :: test-only task #345892 for sisyphus started by antohami:
#100 build 2.9.2-alt3.20240203 from /people/antohami/packages/linuxcnc.git fetched at 2024-Apr-26 18:11:17
2024-Apr-26 18:11:22 :: [aarch64] #100 linuxcnc.git 2.9.2-alt3.20240203: build start
2024-Apr-26 18:11:22 :: [ppc64le] #100 linuxcnc.git 2.9.2-alt3.20240203: build start
2024-Apr-26 18:11:22 :: [x86_64] #100 linuxcnc.git 2.9.2-alt3.20240203: build start
2024-Apr-26 18:11:22 :: [i586] #100 linuxcnc.git 2.9.2-alt3.20240203: build start
2024-Apr-26 18:11:46 :: [ppc64le] #100 linuxcnc.git 2.9.2-alt3.20240203: build SKIPPED
2024-Apr-26 18:15:00 :: [x86_64] #100 linuxcnc.git 2.9.2-alt3.20240203: build OK
2024-Apr-26 18:15:15 :: [i586] #100 linuxcnc.git 2.9.2-alt3.20240203: build OK
2024-Apr-26 18:16:41 :: [aarch64] #100 linuxcnc.git 2.9.2-alt3.20240203: build OK
2024-Apr-26 18:16:55 :: #100: linuxcnc.git 2.9.2-alt3.20240203: package `linuxcnc' version `2.9.2-alt3.20240203' was built earlier for sisyphus from a different source: `gear:99825a410805d7a6dd9a7cab32b5abbbcbec1320'
2024-Apr-26 18:16:55 :: #100: linuxcnc.git 2.9.2-alt3.20240203: source id check FAILED
2024-Apr-26 18:16:57 :: build check FAILED for: #100
2024-Apr-26 18:16:57 :: task #345892 for sisyphus FAILED
^ permalink raw reply [flat|nested] 3+ messages in thread
* [#345892] TESTED (try 2) linuxcnc.git=2.9.2-alt4.20240203
2024-04-26 18:16 [#345892] [test-only] FAILED linuxcnc.git=2.9.2-alt3.20240203 Girar awaiter (antohami)
@ 2024-04-26 18:56 ` Girar awaiter (antohami)
2024-04-26 19:04 ` [#345892] DONE (try 3) linuxcnc.git=2.9.2-alt4.20240203 Girar pender (antohami)
1 sibling, 0 replies; 3+ messages in thread
From: Girar awaiter (antohami) @ 2024-04-26 18:56 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger, girar-builder-sisyphus
https://git.altlinux.org/tasks/345892/logs/events.2.1.log
subtask name aarch64 i586 ppc64le x86_64
#200 linuxcnc 5:18 3:51 - 3:34
2024-Apr-26 18:43:50 :: test-only task #345892 for sisyphus resumed by antohami:
#100 removed
#200 build 2.9.2-alt4.20240203 from /people/antohami/packages/linuxcnc.git fetched at 2024-Apr-26 18:43:28
2024-Apr-26 18:43:52 :: [aarch64] #200 linuxcnc.git 2.9.2-alt4.20240203: build start
2024-Apr-26 18:43:52 :: [i586] #200 linuxcnc.git 2.9.2-alt4.20240203: build start
2024-Apr-26 18:43:52 :: [ppc64le] #200 linuxcnc.git 2.9.2-alt4.20240203: build start
2024-Apr-26 18:43:52 :: [x86_64] #200 linuxcnc.git 2.9.2-alt4.20240203: build start
2024-Apr-26 18:44:14 :: [ppc64le] #200 linuxcnc.git 2.9.2-alt4.20240203: build SKIPPED
2024-Apr-26 18:47:26 :: [x86_64] #200 linuxcnc.git 2.9.2-alt4.20240203: build OK
2024-Apr-26 18:47:43 :: [i586] #200 linuxcnc.git 2.9.2-alt4.20240203: build OK
2024-Apr-26 18:49:10 :: [aarch64] #200 linuxcnc.git 2.9.2-alt4.20240203: build OK
2024-Apr-26 18:49:32 :: #200: linuxcnc.git 2.9.2-alt4.20240203: build check OK
2024-Apr-26 18:49:34 :: build check OK
2024-Apr-26 18:49:48 :: noarch check OK
2024-Apr-26 18:49:51 :: plan: src +1 -1 =19225, aarch64 +5 -5 =32556, i586 +5 -5 =32046, x86_64 +5 -5 =33411
#200 linuxcnc 2.9.2-alt3.20240203 -> 2.9.2-alt4.20240203
Sat Apr 27 2024 Anton Midyukov <antohami@altlinux> 2.9.2-alt4.20240203
- Add missing dependency on libGLU (fix empty screen in Axis)
2024-Apr-26 18:50:30 :: patched apt indices
2024-Apr-26 18:50:41 :: created next repo
2024-Apr-26 18:50:50 :: duplicate provides check OK
2024-Apr-26 18:51:29 :: dependencies check OK
2024-Apr-26 18:51:57 :: [x86_64 i586 aarch64] ELF symbols check OK
2024-Apr-26 18:52:13 :: [i586] #200 liblinuxcnc: install check OK
2024-Apr-26 18:52:13 :: [x86_64] #200 liblinuxcnc: install check OK
2024-Apr-26 18:52:22 :: [aarch64] #200 liblinuxcnc: install check OK
2024-Apr-26 18:52:25 :: [x86_64] #200 liblinuxcnc-debuginfo: install check OK
2024-Apr-26 18:52:25 :: [i586] #200 liblinuxcnc-debuginfo: install check OK
2024-Apr-26 18:52:39 :: [aarch64] #200 liblinuxcnc-debuginfo: install check OK
2024-Apr-26 18:52:56 :: [x86_64] #200 liblinuxcnc-devel: install check OK
2024-Apr-26 18:52:58 :: [i586] #200 liblinuxcnc-devel: install check OK
2024-Apr-26 18:53:23 :: [aarch64] #200 liblinuxcnc-devel: install check OK
x86_64: linuxcnc=2.9.2-alt4.20240203 post-install unowned files:
/etc/X11/app-defaults
/usr/lib/udev/rules.d/99-shuttle.rules
/usr/lib/udev/rules.d/99-xhc-whb04b-6.rules
/usr/lib/udev/rules.d/99-xhc.rules
/usr/share/gtksourceview-2.0
2024-Apr-26 18:53:26 :: [x86_64] #200 linuxcnc: install check OK
i586: linuxcnc=2.9.2-alt4.20240203 post-install unowned files:
/etc/X11/app-defaults
/usr/lib/udev/rules.d/99-shuttle.rules
/usr/lib/udev/rules.d/99-xhc-whb04b-6.rules
/usr/lib/udev/rules.d/99-xhc.rules
/usr/share/gtksourceview-2.0
2024-Apr-26 18:53:31 :: [i586] #200 linuxcnc: install check OK
2024-Apr-26 18:54:05 :: [x86_64] #200 linuxcnc-debuginfo: install check OK
aarch64: linuxcnc=2.9.2-alt4.20240203 post-install unowned files:
/etc/X11/app-defaults
/usr/lib/udev/rules.d/99-shuttle.rules
/usr/lib/udev/rules.d/99-xhc-whb04b-6.rules
/usr/lib/udev/rules.d/99-xhc.rules
/usr/share/gtksourceview-2.0
2024-Apr-26 18:54:06 :: [aarch64] #200 linuxcnc: install check OK
2024-Apr-26 18:54:14 :: [i586] #200 linuxcnc-debuginfo: install check OK
2024-Apr-26 18:55:01 :: [aarch64] #200 linuxcnc-debuginfo: install check OK
2024-Apr-26 18:55:02 :: [x86_64-i586] plan: #3 +3 -3 =10839
2024-Apr-26 18:55:31 :: [x86_64-i586] arepo build OK
2024-Apr-26 18:55:47 :: [x86_64-i586] generated apt indices
2024-Apr-26 18:55:48 :: [x86_64-i586] created next repo
2024-Apr-26 18:55:59 :: [x86_64-i586] dependencies check OK
2024-Apr-26 18:56:01 :: gears inheritance check OK
2024-Apr-26 18:56:01 :: srpm inheritance check OK
girar-check-perms: access to linuxcnc ALLOWED for antohami: project leader
check-subtask-perms: #200: linuxcnc: allowed for antohami
2024-Apr-26 18:56:02 :: acl check OK
2024-Apr-26 18:56:14 :: created contents_index files
2024-Apr-26 18:56:23 :: created hash files: aarch64 i586 src x86_64-i586 x86_64
2024-Apr-26 18:56:26 :: task #345892 for sisyphus TESTED
^ permalink raw reply [flat|nested] 3+ messages in thread
* [#345892] DONE (try 3) linuxcnc.git=2.9.2-alt4.20240203
2024-04-26 18:16 [#345892] [test-only] FAILED linuxcnc.git=2.9.2-alt3.20240203 Girar awaiter (antohami)
2024-04-26 18:56 ` [#345892] TESTED (try 2) linuxcnc.git=2.9.2-alt4.20240203 Girar awaiter (antohami)
@ 2024-04-26 19:04 ` Girar pender (antohami)
1 sibling, 0 replies; 3+ messages in thread
From: Girar pender (antohami) @ 2024-04-26 19:04 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger, girar-builder-sisyphus
https://git.altlinux.org/tasks/archive/done/_337/345892/logs/events.3.1.log
2024-Apr-26 18:59:07 :: task #345892 for sisyphus resumed by antohami:
#100 removed
#200 build 2.9.2-alt4.20240203 from /people/antohami/packages/linuxcnc.git fetched at 2024-Apr-26 18:43:28
2024-Apr-26 18:59:09 :: [ppc64le] #200 linuxcnc.git 2.9.2-alt4.20240203: build start
2024-Apr-26 18:59:09 :: [i586] #200 linuxcnc.git 2.9.2-alt4.20240203: build start
2024-Apr-26 18:59:09 :: [x86_64] #200 linuxcnc.git 2.9.2-alt4.20240203: build start
2024-Apr-26 18:59:09 :: [aarch64] #200 linuxcnc.git 2.9.2-alt4.20240203: build start
2024-Apr-26 18:59:23 :: [i586] #200 linuxcnc.git 2.9.2-alt4.20240203: build OK (cached)
2024-Apr-26 18:59:23 :: [x86_64] #200 linuxcnc.git 2.9.2-alt4.20240203: build OK (cached)
2024-Apr-26 18:59:31 :: [aarch64] #200 linuxcnc.git 2.9.2-alt4.20240203: build OK (cached)
2024-Apr-26 18:59:33 :: [ppc64le] #200 linuxcnc.git 2.9.2-alt4.20240203: build SKIPPED
2024-Apr-26 18:59:55 :: #200: linuxcnc.git 2.9.2-alt4.20240203: build check OK
2024-Apr-26 18:59:57 :: build check OK
2024-Apr-26 19:00:11 :: noarch check OK
2024-Apr-26 19:00:14 :: plan: src +1 -1 =19226, aarch64 +5 -5 =32556, i586 +5 -5 =32046, x86_64 +5 -5 =33411
#200 linuxcnc 2.9.2-alt3.20240203 -> 2.9.2-alt4.20240203
Sat Apr 27 2024 Anton Midyukov <antohami@altlinux> 2.9.2-alt4.20240203
- Add missing dependency on libGLU (fix empty screen in Axis)
2024-Apr-26 19:00:56 :: patched apt indices
2024-Apr-26 19:01:09 :: created next repo
2024-Apr-26 19:01:19 :: duplicate provides check OK
2024-Apr-26 19:02:03 :: dependencies check OK
2024-Apr-26 19:02:31 :: [x86_64 i586 aarch64] ELF symbols check OK
2024-Apr-26 19:02:43 :: [i586] #200 liblinuxcnc: install check OK (cached)
2024-Apr-26 19:02:43 :: [x86_64] #200 liblinuxcnc: install check OK (cached)
2024-Apr-26 19:02:47 :: [i586] #200 liblinuxcnc-debuginfo: install check OK (cached)
2024-Apr-26 19:02:48 :: [x86_64] #200 liblinuxcnc-debuginfo: install check OK (cached)
2024-Apr-26 19:02:51 :: [aarch64] #200 liblinuxcnc: install check OK (cached)
2024-Apr-26 19:02:53 :: [i586] #200 liblinuxcnc-devel: install check OK (cached)
2024-Apr-26 19:02:54 :: [x86_64] #200 liblinuxcnc-devel: install check OK (cached)
i586: linuxcnc=2.9.2-alt4.20240203 post-install unowned files:
/etc/X11/app-defaults
/usr/lib/udev/rules.d/99-shuttle.rules
/usr/lib/udev/rules.d/99-xhc-whb04b-6.rules
/usr/lib/udev/rules.d/99-xhc.rules
/usr/share/gtksourceview-2.0
2024-Apr-26 19:02:59 :: [i586] #200 linuxcnc: install check OK (cached)
2024-Apr-26 19:02:59 :: [aarch64] #200 liblinuxcnc-debuginfo: install check OK (cached)
x86_64: linuxcnc=2.9.2-alt4.20240203 post-install unowned files:
/etc/X11/app-defaults
/usr/lib/udev/rules.d/99-shuttle.rules
/usr/lib/udev/rules.d/99-xhc-whb04b-6.rules
/usr/lib/udev/rules.d/99-xhc.rules
/usr/share/gtksourceview-2.0
2024-Apr-26 19:02:59 :: [x86_64] #200 linuxcnc: install check OK (cached)
2024-Apr-26 19:03:05 :: [i586] #200 linuxcnc-debuginfo: install check OK (cached)
2024-Apr-26 19:03:06 :: [x86_64] #200 linuxcnc-debuginfo: install check OK (cached)
2024-Apr-26 19:03:09 :: [aarch64] #200 liblinuxcnc-devel: install check OK (cached)
aarch64: linuxcnc=2.9.2-alt4.20240203 post-install unowned files:
/etc/X11/app-defaults
/usr/lib/udev/rules.d/99-shuttle.rules
/usr/lib/udev/rules.d/99-xhc-whb04b-6.rules
/usr/lib/udev/rules.d/99-xhc.rules
/usr/share/gtksourceview-2.0
2024-Apr-26 19:03:18 :: [aarch64] #200 linuxcnc: install check OK (cached)
2024-Apr-26 19:03:29 :: [aarch64] #200 linuxcnc-debuginfo: install check OK (cached)
2024-Apr-26 19:03:30 :: [x86_64-i586] plan: #0 +3 -3 =10839
2024-Apr-26 19:03:46 :: [x86_64-i586] generated apt indices
2024-Apr-26 19:03:47 :: [x86_64-i586] created next repo
2024-Apr-26 19:03:59 :: [x86_64-i586] dependencies check OK
2024-Apr-26 19:04:00 :: gears inheritance check OK
2024-Apr-26 19:04:01 :: srpm inheritance check OK
girar-check-perms: access to linuxcnc ALLOWED for antohami: project leader
check-subtask-perms: #200: linuxcnc: allowed for antohami
2024-Apr-26 19:04:02 :: acl check OK
2024-Apr-26 19:04:13 :: created contents_index files
2024-Apr-26 19:04:21 :: created hash files: aarch64 i586 src x86_64-i586 x86_64
2024-Apr-26 19:04:24 :: task #345892 for sisyphus TESTED
2024-Apr-26 19:04:25 :: task is ready for commit
2024-Apr-26 19:04:30 :: repo clone OK
2024-Apr-26 19:04:30 :: packages update OK
2024-Apr-26 19:04:36 :: [x86_64 i586 aarch64] update OK
2024-Apr-26 19:04:37 :: [x86_64-i586] update OK
2024-Apr-26 19:04:37 :: repo update OK
2024-Apr-26 19:04:48 :: repo save OK
2024-Apr-26 19:04:48 :: src index update OK
2024-Apr-26 19:04:48 :: updated /gears/l/linuxcnc.git branch `sisyphus'
2024-Apr-26 19:04:57 :: gears update OK
2024-Apr-26 19:04:57 :: task #345892 for sisyphus DONE
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-04-26 19:04 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-26 18:16 [#345892] [test-only] FAILED linuxcnc.git=2.9.2-alt3.20240203 Girar awaiter (antohami)
2024-04-26 18:56 ` [#345892] TESTED (try 2) linuxcnc.git=2.9.2-alt4.20240203 Girar awaiter (antohami)
2024-04-26 19:04 ` [#345892] DONE (try 3) linuxcnc.git=2.9.2-alt4.20240203 Girar pender (antohami)
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git