* [#283801] [test-only] FAILED linuxcnc.git=2.9.0-alt0.4.20210826
@ 2021-08-26 7:28 Girar awaiter (antohami)
2021-08-26 8:04 ` [#283801] [test-only] FAILED (try 2) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Girar awaiter (antohami) @ 2021-08-26 7:28 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger, girar-builder-sisyphus
http://git.altlinux.org/tasks/283801/logs/events.1.1.log
subtask name aarch64 armh i586 ppc64le x86_64
#100 linuxcnc 5:44 10:20 7:25 - 5:14
2021-Aug-26 07:16:25 :: test-only task #283801 for sisyphus started by antohami:
#100 build 2.9.0-alt0.4.20210826 from /people/antohami/packages/linuxcnc.git fetched at 2021-Aug-26 07:16:24
2021-Aug-26 07:16:26 :: [aarch64] #100 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 07:16:26 :: [ppc64le] #100 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 07:16:26 :: [armh] #100 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 07:16:26 :: [i586] #100 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 07:16:26 :: [x86_64] #100 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 07:16:44 :: [ppc64le] #100 linuxcnc.git 2.9.0-alt0.4.20210826: build SKIPPED
2021-Aug-26 07:21:40 :: [x86_64] #100 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 07:22:10 :: [aarch64] #100 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 07:23:51 :: [i586] #100 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 07:26:46 :: [armh] #100 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 07:27:13 :: #100: linuxcnc.git 2.9.0-alt0.4.20210826: build check OK
2021-Aug-26 07:27:13 :: build check OK
2021-Aug-26 07:27:27 :: noarch check OK
2021-Aug-26 07:27:29 :: plan: src +1 -1 =17378, aarch64 +5 -5 =28896, armh +5 -5 =27253, i586 +5 -5 =29652, x86_64 +5 -5 =30184
#100 linuxcnc 2.9.0-alt0.3.20210801 -> 2.9.0-alt0.4.20210826
Thu Aug 26 2021 Anton Midyukov <antohami@altlinux> 2.9.0-alt0.4.20210826
- new snapshot
- disable LTO flag
2021-Aug-26 07:28:04 :: patched apt indices
2021-Aug-26 07:28:15 :: created next repo
2021-Aug-26 07:28:24 :: duplicate provides check OK
x86_64: NEW unmet dependencies detected:
linuxcnc#2.9.0-alt0.4.20210826:sisyphus+283801.100.1.1@1629962461 typelib(Cairo)
i586: NEW unmet dependencies detected:
linuxcnc#2.9.0-alt0.4.20210826:sisyphus+283801.100.1.1@1629962590 typelib(Cairo)
aarch64: NEW unmet dependencies detected:
linuxcnc#2.9.0-alt0.4.20210826:sisyphus+283801.100.1.1@1629962487 typelib(Cairo)
armh: NEW unmet dependencies detected:
linuxcnc#2.9.0-alt0.4.20210826:sisyphus+283801.100.1.1@1629962750 typelib(Cairo)
ACLs of affected packages (1):
linuxcnc antohami @everybody
2021-Aug-26 07:28:54 :: unmets: x86_64 +1 -0 =1, i586 +1 -0 =1, aarch64 +1 -0 =5, armh +1 -0 =20
2021-Aug-26 07:28:54 :: dependencies check FAILED
2021-Aug-26 07:28:54 :: task #283801 for sisyphus FAILED
^ permalink raw reply [flat|nested] 6+ messages in thread
* [#283801] [test-only] FAILED (try 2) linuxcnc.git=2.9.0-alt0.4.20210826
2021-08-26 7:28 [#283801] [test-only] FAILED linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
@ 2021-08-26 8:04 ` Girar awaiter (antohami)
2021-08-26 8:39 ` [#283801] [test-only] FAILED (try 3) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Girar awaiter (antohami) @ 2021-08-26 8:04 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger, girar-builder-sisyphus
http://git.altlinux.org/tasks/283801/logs/events.2.1.log
subtask name aarch64 armh i586 ppc64le x86_64
#200 linuxcnc 5:57 10:40 6:28 - 6:43
2021-Aug-26 07:53:34 :: test-only task #283801 for sisyphus resumed by antohami:
#100 removed
#200 build 2.9.0-alt0.4.20210826 from /people/antohami/packages/linuxcnc.git fetched at 2021-Aug-26 07:53:14
2021-Aug-26 07:53:35 :: [aarch64] #200 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 07:53:35 :: [x86_64] #200 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 07:53:35 :: [armh] #200 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 07:53:35 :: [ppc64le] #200 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 07:53:35 :: [i586] #200 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 07:54:07 :: [ppc64le] #200 linuxcnc.git 2.9.0-alt0.4.20210826: build SKIPPED
2021-Aug-26 07:59:32 :: [aarch64] #200 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 08:00:03 :: [i586] #200 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 08:00:05 :: task abort requested by antohami.
2021-Aug-26 08:00:18 :: [x86_64] #200 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 08:04:15 :: [armh] #200 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 08:04:15 :: task processing CANCELLED
2021-Aug-26 08:04:15 :: task #283801 for sisyphus FAILED
^ permalink raw reply [flat|nested] 6+ messages in thread
* [#283801] [test-only] FAILED (try 3) linuxcnc.git=2.9.0-alt0.4.20210826
2021-08-26 7:28 [#283801] [test-only] FAILED linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
2021-08-26 8:04 ` [#283801] [test-only] FAILED (try 2) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
@ 2021-08-26 8:39 ` Girar awaiter (antohami)
2021-08-26 9:07 ` [#283801] [test-only] FAILED (try 4) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Girar awaiter (antohami) @ 2021-08-26 8:39 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger, girar-builder-sisyphus
http://git.altlinux.org/tasks/283801/logs/events.3.1.log
subtask name aarch64 armh i586 ppc64le x86_64
#300 linuxcnc 6:28 11:27 9:03 - 5:59
2021-Aug-26 08:25:47 :: test-only task #283801 for sisyphus resumed by antohami:
#100 removed
#200 removed
#300 build 2.9.0-alt0.4.20210826 from /people/antohami/packages/linuxcnc.git fetched at 2021-Aug-26 08:25:25
2021-Aug-26 08:25:47 :: [ppc64le] #300 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 08:25:47 :: [aarch64] #300 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 08:25:47 :: [armh] #300 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 08:25:47 :: [i586] #300 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 08:25:47 :: [x86_64] #300 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 08:26:06 :: [ppc64le] #300 linuxcnc.git 2.9.0-alt0.4.20210826: build SKIPPED
2021-Aug-26 08:31:46 :: [x86_64] #300 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 08:32:15 :: [aarch64] #300 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 08:34:50 :: [i586] #300 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 08:37:14 :: [armh] #300 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 08:37:40 :: #300: linuxcnc.git 2.9.0-alt0.4.20210826: build check OK
2021-Aug-26 08:37:40 :: build check OK
2021-Aug-26 08:37:55 :: noarch check OK
2021-Aug-26 08:37:57 :: plan: src +1 -1 =17378, aarch64 +5 -5 =28896, armh +5 -5 =27253, i586 +5 -5 =29652, x86_64 +5 -5 =30184
#300 linuxcnc 2.9.0-alt0.3.20210801 -> 2.9.0-alt0.4.20210826
Thu Aug 26 2021 Anton Midyukov <antohami@altlinux> 2.9.0-alt0.4.20210826
- new snapshot
- remove unpackaged static libraries (fix build with LTO flag)
2021-Aug-26 08:38:41 :: patched apt indices
2021-Aug-26 08:38:52 :: created next repo
2021-Aug-26 08:39:02 :: duplicate provides check OK
x86_64: NEW unmet dependencies detected:
linuxcnc#2.9.0-alt0.4.20210826:sisyphus+283801.300.3.1@1629966667 typelib(Cairo)
i586: NEW unmet dependencies detected:
linuxcnc#2.9.0-alt0.4.20210826:sisyphus+283801.300.3.1@1629966850 typelib(Cairo)
aarch64: NEW unmet dependencies detected:
linuxcnc#2.9.0-alt0.4.20210826:sisyphus+283801.300.3.1@1629966693 typelib(Cairo)
armh: NEW unmet dependencies detected:
linuxcnc#2.9.0-alt0.4.20210826:sisyphus+283801.300.3.1@1629966978 typelib(Cairo)
ACLs of affected packages (1):
linuxcnc antohami @everybody
2021-Aug-26 08:39:44 :: unmets: x86_64 +1 -0 =1, i586 +1 -0 =1, aarch64 +1 -0 =5, armh +1 -0 =20
2021-Aug-26 08:39:44 :: dependencies check FAILED
2021-Aug-26 08:39:44 :: task #283801 for sisyphus FAILED
^ permalink raw reply [flat|nested] 6+ messages in thread
* [#283801] [test-only] FAILED (try 4) linuxcnc.git=2.9.0-alt0.4.20210826
2021-08-26 7:28 [#283801] [test-only] FAILED linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
2021-08-26 8:04 ` [#283801] [test-only] FAILED (try 2) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
2021-08-26 8:39 ` [#283801] [test-only] FAILED (try 3) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
@ 2021-08-26 9:07 ` Girar awaiter (antohami)
2021-08-26 10:13 ` [#283801] TESTED (try 5) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
2021-08-26 15:52 ` [#283801] DONE (try 6) linuxcnc.git=2.9.0-alt0.4.20210826 Girar pender (antohami)
4 siblings, 0 replies; 6+ messages in thread
From: Girar awaiter (antohami) @ 2021-08-26 9:07 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger, girar-builder-sisyphus
http://git.altlinux.org/tasks/283801/logs/events.4.1.log
subtask name aarch64 armh i586 ppc64le x86_64
#400 linuxcnc 7:19 12:11 7:13 - 7:06
2021-Aug-26 08:53:12 :: test-only task #283801 for sisyphus resumed by antohami:
#100 removed
#200 removed
#300 removed
#400 build 2.9.0-alt0.4.20210826 from /people/antohami/packages/linuxcnc.git fetched at 2021-Aug-26 08:52:35
2021-Aug-26 08:53:13 :: [ppc64le] #400 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 08:53:13 :: [aarch64] #400 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 08:53:13 :: [x86_64] #400 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 08:53:13 :: [i586] #400 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 08:53:13 :: [armh] #400 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 08:53:52 :: [ppc64le] #400 linuxcnc.git 2.9.0-alt0.4.20210826: build SKIPPED
2021-Aug-26 09:00:19 :: [x86_64] #400 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 09:00:26 :: [i586] #400 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 09:00:32 :: [aarch64] #400 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 09:05:24 :: [armh] #400 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 09:05:50 :: #400: linuxcnc.git 2.9.0-alt0.4.20210826: build check OK
2021-Aug-26 09:05:50 :: build check OK
2021-Aug-26 09:06:05 :: noarch check OK
2021-Aug-26 09:06:07 :: plan: src +1 -1 =17378, aarch64 +5 -5 =28894, armh +5 -5 =27251, i586 +5 -5 =29650, x86_64 +5 -5 =30182
#400 linuxcnc 2.9.0-alt0.3.20210801 -> 2.9.0-alt0.4.20210826
Thu Aug 26 2021 Anton Midyukov <antohami@altlinux> 2.9.0-alt0.4.20210826
- new snapshot
- remove unpackaged static libraries (fix build with LTO flag)
2021-Aug-26 09:06:42 :: patched apt indices
2021-Aug-26 09:06:55 :: created next repo
2021-Aug-26 09:07:04 :: duplicate provides check OK
x86_64: NEW unmet dependencies detected:
linuxcnc#2.9.0-alt0.4.20210826:sisyphus+283801.400.4.1@1629968362 typelib(Cairo)
i586: NEW unmet dependencies detected:
linuxcnc#2.9.0-alt0.4.20210826:sisyphus+283801.400.4.1@1629968392 typelib(Cairo)
aarch64: NEW unmet dependencies detected:
linuxcnc#2.9.0-alt0.4.20210826:sisyphus+283801.400.4.1@1629968390 typelib(Cairo)
armh: NEW unmet dependencies detected:
linuxcnc#2.9.0-alt0.4.20210826:sisyphus+283801.400.4.1@1629968668 typelib(Cairo)
ACLs of affected packages (1):
linuxcnc antohami @everybody
2021-Aug-26 09:07:31 :: unmets: x86_64 +1 -0 =1, i586 +1 -0 =1, aarch64 +1 -0 =5, armh +1 -0 =20
2021-Aug-26 09:07:31 :: dependencies check FAILED
2021-Aug-26 09:07:31 :: task #283801 for sisyphus FAILED
^ permalink raw reply [flat|nested] 6+ messages in thread
* [#283801] TESTED (try 5) linuxcnc.git=2.9.0-alt0.4.20210826
2021-08-26 7:28 [#283801] [test-only] FAILED linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
` (2 preceding siblings ...)
2021-08-26 9:07 ` [#283801] [test-only] FAILED (try 4) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
@ 2021-08-26 10:13 ` Girar awaiter (antohami)
2021-08-26 15:52 ` [#283801] DONE (try 6) linuxcnc.git=2.9.0-alt0.4.20210826 Girar pender (antohami)
4 siblings, 0 replies; 6+ messages in thread
From: Girar awaiter (antohami) @ 2021-08-26 10:13 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger, girar-builder-sisyphus
http://git.altlinux.org/tasks/283801/logs/events.5.1.log
subtask name aarch64 armh i586 ppc64le x86_64
#500 linuxcnc 6:36 11:38 6:41 - 5:36
2021-Aug-26 09:54:31 :: test-only task #283801 for sisyphus resumed by antohami:
#100 removed
#200 removed
#300 removed
#400 removed
#500 build 2.9.0-alt0.4.20210826 from /people/antohami/packages/linuxcnc.git fetched at 2021-Aug-26 09:54:16
2021-Aug-26 09:54:32 :: [x86_64] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 09:54:32 :: [i586] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 09:54:32 :: [ppc64le] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 09:54:32 :: [aarch64] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 09:54:32 :: [armh] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 09:54:49 :: [ppc64le] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build SKIPPED
2021-Aug-26 10:00:08 :: [x86_64] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 10:01:08 :: [aarch64] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 10:01:13 :: [i586] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 10:06:10 :: [armh] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build OK
2021-Aug-26 10:06:37 :: #500: linuxcnc.git 2.9.0-alt0.4.20210826: build check OK
2021-Aug-26 10:06:38 :: build check OK
2021-Aug-26 10:06:51 :: noarch check OK
2021-Aug-26 10:06:53 :: plan: src +1 -1 =17378, aarch64 +5 -5 =28893, armh +5 -5 =27250, i586 +5 -5 =29648, x86_64 +5 -5 =30180
#500 linuxcnc 2.9.0-alt0.3.20210801 -> 2.9.0-alt0.4.20210826
Thu Aug 26 2021 Anton Midyukov <antohami@altlinux> 2.9.0-alt0.4.20210826
- new snapshot
- remove unpackaged static libraries (fix build with LTO flag)
- cleanup spec
2021-Aug-26 10:07:28 :: patched apt indices
2021-Aug-26 10:07:38 :: created next repo
2021-Aug-26 10:07:46 :: duplicate provides check OK
2021-Aug-26 10:08:12 :: dependencies check OK
2021-Aug-26 10:08:44 :: [x86_64 i586 aarch64 armh] ELF symbols check OK
2021-Aug-26 10:09:00 :: [i586] #500 liblinuxcnc: install check OK
2021-Aug-26 10:09:01 :: [x86_64] #500 liblinuxcnc: install check OK
2021-Aug-26 10:09:05 :: [aarch64] #500 liblinuxcnc: install check OK
2021-Aug-26 10:09:10 :: [i586] #500 liblinuxcnc-debuginfo: install check OK
2021-Aug-26 10:09:10 :: [x86_64] #500 liblinuxcnc-debuginfo: install check OK
2021-Aug-26 10:09:15 :: [aarch64] #500 liblinuxcnc-debuginfo: install check OK
2021-Aug-26 10:09:16 :: [armh] #500 liblinuxcnc: install check OK
2021-Aug-26 10:09:30 :: [armh] #500 liblinuxcnc-debuginfo: install check OK
2021-Aug-26 10:09:39 :: [x86_64] #500 liblinuxcnc-devel: install check OK
2021-Aug-26 10:09:44 :: [aarch64] #500 liblinuxcnc-devel: install check OK
2021-Aug-26 10:09:45 :: [i586] #500 liblinuxcnc-devel: install check OK
x86_64: linuxcnc=2.9.0-alt0.4.20210826 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
/usr/share/qtvcp
2021-Aug-26 10:10:08 :: [x86_64] #500 linuxcnc: install check OK
aarch64: linuxcnc=2.9.0-alt0.4.20210826 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
/usr/share/qtvcp
2021-Aug-26 10:10:12 :: [aarch64] #500 linuxcnc: install check OK
i586: linuxcnc=2.9.0-alt0.4.20210826 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
/usr/share/qtvcp
2021-Aug-26 10:10:18 :: [i586] #500 linuxcnc: install check OK
2021-Aug-26 10:10:23 :: [armh] #500 liblinuxcnc-devel: install check OK
2021-Aug-26 10:10:48 :: [x86_64] #500 linuxcnc-debuginfo: install check OK
2021-Aug-26 10:10:50 :: [aarch64] #500 linuxcnc-debuginfo: install check OK
2021-Aug-26 10:11:03 :: [i586] #500 linuxcnc-debuginfo: install check OK
armh: linuxcnc=2.9.0-alt0.4.20210826 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
/usr/share/qtvcp
2021-Aug-26 10:11:07 :: [armh] #500 linuxcnc: install check OK
2021-Aug-26 10:12:07 :: [armh] #500 linuxcnc-debuginfo: install check OK
2021-Aug-26 10:12:08 :: [x86_64-i586] plan: #3 +3 -3 =10161
2021-Aug-26 10:12:37 :: [x86_64-i586] arepo build OK
2021-Aug-26 10:12:50 :: [x86_64-i586] generated apt indices
2021-Aug-26 10:12:51 :: [x86_64-i586] created next repo
2021-Aug-26 10:12:58 :: [x86_64-i586] dependencies check OK
2021-Aug-26 10:12:58 :: gears inheritance check OK
2021-Aug-26 10:12:58 :: srpm inheritance check OK
girar-check-perms: access to linuxcnc ALLOWED for antohami: project leader
check-subtask-perms: #500: linuxcnc: allowed for antohami
2021-Aug-26 10:12:58 :: acl check OK
2021-Aug-26 10:13:06 :: created contents_index files
2021-Aug-26 10:13:15 :: created hash files: aarch64 armh i586 src x86_64-i586 x86_64
2021-Aug-26 10:13:16 :: task #283801 for sisyphus TESTED
^ permalink raw reply [flat|nested] 6+ messages in thread
* [#283801] DONE (try 6) linuxcnc.git=2.9.0-alt0.4.20210826
2021-08-26 7:28 [#283801] [test-only] FAILED linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
` (3 preceding siblings ...)
2021-08-26 10:13 ` [#283801] TESTED (try 5) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
@ 2021-08-26 15:52 ` Girar pender (antohami)
4 siblings, 0 replies; 6+ messages in thread
From: Girar pender (antohami) @ 2021-08-26 15:52 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger, girar-builder-sisyphus
http://git.altlinux.org/tasks/archive/done/_277/283801/logs/events.6.3.log
subtask name aarch64 armh i586 ppc64le x86_64
#500 linuxcnc 6:33 11:26 6:26 - 5:29
2021-Aug-26 15:47:24 :: task #283801 for sisyphus resumed by antohami:
#100 removed
#200 removed
#300 removed
#400 removed
#500 build 2.9.0-alt0.4.20210826 from /people/antohami/packages/linuxcnc.git fetched at 2021-Aug-26 09:54:16
2021-Aug-26 15:47:25 :: [ppc64le] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 15:47:25 :: [armh] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 15:47:25 :: [aarch64] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 15:47:25 :: [i586] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 15:47:25 :: [x86_64] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build start
2021-Aug-26 15:47:37 :: [i586] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build OK (cached)
2021-Aug-26 15:47:38 :: [x86_64] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build OK (cached)
2021-Aug-26 15:47:39 :: [aarch64] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build OK (cached)
2021-Aug-26 15:47:43 :: [ppc64le] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build SKIPPED
2021-Aug-26 15:47:46 :: [armh] #500 linuxcnc.git 2.9.0-alt0.4.20210826: build OK (cached)
2021-Aug-26 15:48:13 :: #500: linuxcnc.git 2.9.0-alt0.4.20210826: build check OK
2021-Aug-26 15:48:13 :: build check OK
2021-Aug-26 15:48:35 :: noarch check OK
2021-Aug-26 15:48:37 :: plan: src +1 -1 =17378, aarch64 +5 -5 =28884, armh +5 -5 =27241, i586 +5 -5 =29639, x86_64 +5 -5 =30171
#500 linuxcnc 2.9.0-alt0.3.20210801 -> 2.9.0-alt0.4.20210826
Thu Aug 26 2021 Anton Midyukov <antohami@altlinux> 2.9.0-alt0.4.20210826
- new snapshot
- remove unpackaged static libraries (fix build with LTO flag)
- cleanup spec
2021-Aug-26 15:49:18 :: patched apt indices
2021-Aug-26 15:49:31 :: created next repo
2021-Aug-26 15:49:40 :: duplicate provides check OK
2021-Aug-26 15:50:09 :: dependencies check OK
2021-Aug-26 15:50:32 :: [x86_64 i586 aarch64 armh] ELF symbols check OK
2021-Aug-26 15:50:45 :: [i586] #500 liblinuxcnc: install check OK (cached)
2021-Aug-26 15:50:46 :: [x86_64] #500 liblinuxcnc: install check OK (cached)
2021-Aug-26 15:50:46 :: [aarch64] #500 liblinuxcnc: install check OK (cached)
2021-Aug-26 15:50:47 :: [i586] #500 liblinuxcnc-debuginfo: install check OK (cached)
2021-Aug-26 15:50:48 :: [x86_64] #500 liblinuxcnc-debuginfo: install check OK (cached)
2021-Aug-26 15:50:49 :: [aarch64] #500 liblinuxcnc-debuginfo: install check OK (cached)
2021-Aug-26 15:50:49 :: [i586] #500 liblinuxcnc-devel: install check OK (cached)
2021-Aug-26 15:50:50 :: [x86_64] #500 liblinuxcnc-devel: install check OK (cached)
2021-Aug-26 15:50:52 :: [aarch64] #500 liblinuxcnc-devel: install check OK (cached)
i586: linuxcnc=2.9.0-alt0.4.20210826 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
/usr/share/qtvcp
2021-Aug-26 15:50:52 :: [i586] #500 linuxcnc: install check OK (cached)
x86_64: linuxcnc=2.9.0-alt0.4.20210826 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
/usr/share/qtvcp
2021-Aug-26 15:50:53 :: [x86_64] #500 linuxcnc: install check OK (cached)
2021-Aug-26 15:50:53 :: [armh] #500 liblinuxcnc: install check OK (cached)
2021-Aug-26 15:50:54 :: [i586] #500 linuxcnc-debuginfo: install check OK (cached)
aarch64: linuxcnc=2.9.0-alt0.4.20210826 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
/usr/share/qtvcp
2021-Aug-26 15:50:55 :: [aarch64] #500 linuxcnc: install check OK (cached)
2021-Aug-26 15:50:55 :: [x86_64] #500 linuxcnc-debuginfo: install check OK (cached)
2021-Aug-26 15:50:57 :: [armh] #500 liblinuxcnc-debuginfo: install check OK (cached)
2021-Aug-26 15:50:58 :: [aarch64] #500 linuxcnc-debuginfo: install check OK (cached)
2021-Aug-26 15:51:02 :: [armh] #500 liblinuxcnc-devel: install check OK (cached)
armh: linuxcnc=2.9.0-alt0.4.20210826 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
/usr/share/qtvcp
2021-Aug-26 15:51:07 :: [armh] #500 linuxcnc: install check OK (cached)
2021-Aug-26 15:51:12 :: [armh] #500 linuxcnc-debuginfo: install check OK (cached)
2021-Aug-26 15:51:13 :: [x86_64-i586] plan: #0 +3 -3 =10157
2021-Aug-26 15:51:26 :: [x86_64-i586] generated apt indices
2021-Aug-26 15:51:27 :: [x86_64-i586] created next repo
2021-Aug-26 15:51:34 :: [x86_64-i586] dependencies check OK
2021-Aug-26 15:51:35 :: gears inheritance check OK
2021-Aug-26 15:51:35 :: srpm inheritance check OK
girar-check-perms: access to linuxcnc ALLOWED for antohami: project leader
check-subtask-perms: #500: linuxcnc: allowed for antohami
2021-Aug-26 15:51:35 :: acl check OK
2021-Aug-26 15:51:42 :: created contents_index files
2021-Aug-26 15:51:51 :: created hash files: aarch64 armh i586 src x86_64-i586 x86_64
2021-Aug-26 15:51:52 :: task #283801 for sisyphus TESTED
2021-Aug-26 15:51:53 :: task is ready for commit
2021-Aug-26 15:51:57 :: repo clone OK
2021-Aug-26 15:51:58 :: packages update OK
2021-Aug-26 15:52:04 :: [x86_64 i586 aarch64 armh] update OK
2021-Aug-26 15:52:04 :: [x86_64-i586] update OK
2021-Aug-26 15:52:04 :: repo update OK
2021-Aug-26 15:52:17 :: repo save OK
2021-Aug-26 15:52:17 :: src index update OK
2021-Aug-26 15:52:17 :: updated /gears/l/linuxcnc.git branch `sisyphus'
2021-Aug-26 15:52:30 :: gears update OK
2021-Aug-26 15:52:30 :: task #283801 for sisyphus DONE
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-08-26 15:52 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-26 7:28 [#283801] [test-only] FAILED linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
2021-08-26 8:04 ` [#283801] [test-only] FAILED (try 2) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
2021-08-26 8:39 ` [#283801] [test-only] FAILED (try 3) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
2021-08-26 9:07 ` [#283801] [test-only] FAILED (try 4) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
2021-08-26 10:13 ` [#283801] TESTED (try 5) linuxcnc.git=2.9.0-alt0.4.20210826 Girar awaiter (antohami)
2021-08-26 15:52 ` [#283801] DONE (try 6) linuxcnc.git=2.9.0-alt0.4.20210826 Girar pender (antohami)
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git