From: "Girar awaiter (vt)" <girar-builder@altlinux.org>
To: Vitaly Chikunov <vt@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org, girar-builder-p9@altlinux.org
Subject: [#261560] [test-only] p9 FAILED klibc.git=2.0.8-alt2 v86d.git=0.1.10-alt10 ...
Date: Wed, 11 Nov 2020 15:33:58 +0000
Message-ID: <20201111153358.GA2467776@gyle.mskdc.altlinux.org> (raw)
http://git.altlinux.org/tasks/261560/logs/events.1.1.log
subtask name aarch64 armh i586 ppc64le x86_64
#100 klibc 47 1:07 43 55 43
#200 v86d - - 36 - 39
#300 rpm-build-vm 35 47 33 40 31
#400 trace-cmd 4:30 5:01 2:14 2:50 2:12
#500 linux-tools failed failed failed failed failed
2020-Nov-11 15:24:50 :: test-only task #261560 for p9 started by vt:
2020-Nov-11 15:24:50 :: message: For_OS_Realnogo_Vremeni
#100 build 2.0.8-alt2 from /gears/k/klibc.git fetched at 2020-Nov-11 15:11:29
#200 build 0.1.10-alt10 from /gears/v/v86d.git fetched at 2020-Nov-11 15:11:37
#300 build 1.17-alt1 from /gears/r/rpm-build-vm.git fetched at 2020-Nov-11 15:11:47
#400 build 2.9.1-alt2 from /gears/t/trace-cmd.git fetched at 2020-Nov-11 15:17:28
#500 build 5.9-alt1 from /gears/l/linux-tools.git fetched at 2020-Nov-11 15:17:35
#600 build 4.19.152-alt1.rt65 from /gears/k/kernel-image-rt.git fetched at 2020-Nov-11 15:22:49
#700 build 0.6-alt2 from /gears/p/python3-module-schedutils.git fetched at 2020-Nov-11 15:22:59
#1000 build python3-module-ethtool-0.14-alt2.src.rpm from sisyphus
#1100 build 0.14.1-alt1 from /gears/t/tuna.git fetched at 2020-Nov-11 15:23:12
#1200 build 2.14.0-alt2 from /gears/t/tuned.git fetched at 2020-Nov-11 15:23:15
2020-Nov-11 15:24:50 :: created build repo
2020-Nov-11 15:24:50 :: [x86_64] #100 klibc.git 2.0.8-alt2: build start
2020-Nov-11 15:24:50 :: [aarch64] #100 klibc.git 2.0.8-alt2: build start
2020-Nov-11 15:24:50 :: [ppc64le] #100 klibc.git 2.0.8-alt2: build start
2020-Nov-11 15:24:50 :: [i586] #100 klibc.git 2.0.8-alt2: build start
2020-Nov-11 15:24:50 :: [armh] #100 klibc.git 2.0.8-alt2: build start
2020-Nov-11 15:25:33 :: [x86_64] #100 klibc.git 2.0.8-alt2: build OK
2020-Nov-11 15:25:33 :: [x86_64] #200 v86d.git 0.1.10-alt10: build start
2020-Nov-11 15:25:33 :: [i586] #100 klibc.git 2.0.8-alt2: build OK
2020-Nov-11 15:25:33 :: [i586] #200 v86d.git 0.1.10-alt10: build start
2020-Nov-11 15:25:37 :: [aarch64] #100 klibc.git 2.0.8-alt2: build OK
2020-Nov-11 15:25:37 :: [aarch64] #200 v86d.git 0.1.10-alt10: build start
2020-Nov-11 15:25:45 :: [ppc64le] #100 klibc.git 2.0.8-alt2: build OK
2020-Nov-11 15:25:45 :: [ppc64le] #200 v86d.git 0.1.10-alt10: build start
2020-Nov-11 15:25:51 :: [aarch64] #200 v86d.git 0.1.10-alt10: build SKIPPED
2020-Nov-11 15:25:51 :: [aarch64] #300 rpm-build-vm.git 1.17-alt1: build start
2020-Nov-11 15:25:57 :: [armh] #100 klibc.git 2.0.8-alt2: build OK
2020-Nov-11 15:25:57 :: [armh] #200 v86d.git 0.1.10-alt10: build start
2020-Nov-11 15:26:00 :: [ppc64le] #200 v86d.git 0.1.10-alt10: build SKIPPED
2020-Nov-11 15:26:00 :: [ppc64le] #300 rpm-build-vm.git 1.17-alt1: build start
build/200/i586/log:[00:00:17] debuginfo.req: WARNING: /lib/klibc-ETLPoZCUpZiq6bb4QkI6roZt1UE.so is not yet debuginfo-enabled
2020-Nov-11 15:26:09 :: [i586] #200 v86d.git 0.1.10-alt10: build OK
2020-Nov-11 15:26:09 :: [i586] #300 rpm-build-vm.git 1.17-alt1: build start
build/200/x86_64/log:[00:00:19] debuginfo.req: WARNING: /lib64/klibc-MCuRWmZjP280YuTm9Oi0GjUmcjo.so is not yet debuginfo-enabled
2020-Nov-11 15:26:12 :: [x86_64] #200 v86d.git 0.1.10-alt10: build OK
2020-Nov-11 15:26:12 :: [x86_64] #300 rpm-build-vm.git 1.17-alt1: build start
2020-Nov-11 15:26:19 :: [armh] #200 v86d.git 0.1.10-alt10: build SKIPPED
2020-Nov-11 15:26:19 :: [armh] #300 rpm-build-vm.git 1.17-alt1: build start
2020-Nov-11 15:26:26 :: [aarch64] #300 rpm-build-vm.git 1.17-alt1: build OK
2020-Nov-11 15:26:26 :: [aarch64] #400 trace-cmd.git 2.9.1-alt2: build start
2020-Nov-11 15:26:40 :: [ppc64le] #300 rpm-build-vm.git 1.17-alt1: build OK
2020-Nov-11 15:26:40 :: [ppc64le] #400 trace-cmd.git 2.9.1-alt2: build start
2020-Nov-11 15:26:42 :: [i586] #300 rpm-build-vm.git 1.17-alt1: build OK
2020-Nov-11 15:26:42 :: [i586] #400 trace-cmd.git 2.9.1-alt2: build start
2020-Nov-11 15:26:43 :: [x86_64] #300 rpm-build-vm.git 1.17-alt1: build OK
2020-Nov-11 15:26:43 :: [x86_64] #400 trace-cmd.git 2.9.1-alt2: build start
2020-Nov-11 15:27:06 :: [armh] #300 rpm-build-vm.git 1.17-alt1: build OK
2020-Nov-11 15:27:06 :: [armh] #400 trace-cmd.git 2.9.1-alt2: build start
2020-Nov-11 15:28:55 :: [x86_64] #400 trace-cmd.git 2.9.1-alt2: build OK
2020-Nov-11 15:28:55 :: [x86_64] #500 linux-tools.git 5.9-alt1: build start
2020-Nov-11 15:28:56 :: [i586] #400 trace-cmd.git 2.9.1-alt2: build OK
2020-Nov-11 15:28:56 :: [i586] #500 linux-tools.git 5.9-alt1: build start
2020-Nov-11 15:29:30 :: [ppc64le] #400 trace-cmd.git 2.9.1-alt2: build OK
2020-Nov-11 15:29:30 :: [ppc64le] #500 linux-tools.git 5.9-alt1: build start
[i586] GEN bpftool-link.8
[i586] environment: rst2man.py: command not found
[i586] make[1]: *** [Makefile:36: bpftool-link.8] Error 127
[i586] make[1]: Leaving directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[i586] make[1]: Entering directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[i586] GEN bpftool-iter.8
[i586] environment: rst2man.py: command not found
[i586] make[1]: *** [Makefile:36: bpftool-iter.8] Error 127
[i586] make[1]: Leaving directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[i586] make: *** [Makefile:201: doc] Error 2
2020-Nov-11 15:30:02 :: [i586] linux-tools.git 5.9-alt1: remote: build failed
2020-Nov-11 15:30:02 :: [i586] #500 linux-tools.git 5.9-alt1: build FAILED
[x86_64] GEN bpftool-link.8
[x86_64] environment: rst2man.py: command not found
[x86_64] make[1]: *** [Makefile:36: bpftool-link.8] Error 127
[x86_64] make[1]: Leaving directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[x86_64] make[1]: Entering directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[x86_64] GEN bpftool-iter.8
[x86_64] environment: rst2man.py: command not found
[x86_64] make[1]: *** [Makefile:36: bpftool-iter.8] Error 127
[x86_64] make[1]: Leaving directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[x86_64] make: *** [Makefile:201: doc] Error 2
2020-Nov-11 15:30:08 :: [x86_64] linux-tools.git 5.9-alt1: remote: build failed
2020-Nov-11 15:30:08 :: [x86_64] #500 linux-tools.git 5.9-alt1: build FAILED
2020-Nov-11 15:30:56 :: [aarch64] #400 trace-cmd.git 2.9.1-alt2: build OK
2020-Nov-11 15:30:56 :: [aarch64] #500 linux-tools.git 5.9-alt1: build start
[ppc64le] GEN bpftool-map.8
[ppc64le] environment: rst2man.py: command not found
[ppc64le] make[1]: *** [Makefile:36: bpftool-map.8] Error 127
[ppc64le] make[1]: Leaving directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[ppc64le] make[1]: Entering directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[ppc64le] GEN bpftool-link.8
[ppc64le] environment: rst2man.py: command not found
[ppc64le] make[1]: *** [Makefile:36: bpftool-link.8] Error 127
[ppc64le] make[1]: Leaving directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[ppc64le] make: *** [Makefile:201: doc] Error 2
2020-Nov-11 15:31:05 :: [ppc64le] linux-tools.git 5.9-alt1: remote: build failed
2020-Nov-11 15:31:05 :: [ppc64le] #500 linux-tools.git 5.9-alt1: build FAILED
[aarch64] GEN bpftool-iter.8
[aarch64] environment: rst2man.py: command not found
[aarch64] make[1]: *** [Makefile:36: bpftool-iter.8] Error 127
[aarch64] make[1]: Leaving directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[aarch64] make[1]: Entering directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[aarch64] GEN bpftool.8
[aarch64] environment: rst2man.py: command not found
[aarch64] make[1]: *** [Makefile:36: bpftool.8] Error 127
[aarch64] make[1]: Leaving directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[aarch64] make: *** [Makefile:201: doc] Error 2
2020-Nov-11 15:32:05 :: [aarch64] linux-tools.git 5.9-alt1: remote: build failed
2020-Nov-11 15:32:05 :: [aarch64] #500 linux-tools.git 5.9-alt1: build FAILED
2020-Nov-11 15:32:07 :: [armh] #400 trace-cmd.git 2.9.1-alt2: build OK
2020-Nov-11 15:32:07 :: [armh] #500 linux-tools.git 5.9-alt1: build start
[armh] GEN bpftool-link.8
[armh] environment: rst2man.py: command not found
[armh] make[1]: *** [Makefile:36: bpftool-link.8] Error 127
[armh] make[1]: Leaving directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[armh] make[1]: Entering directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[armh] GEN bpftool-iter.8
[armh] environment: rst2man.py: command not found
[armh] make[1]: *** [Makefile:36: bpftool-iter.8] Error 127
[armh] make[1]: Leaving directory '/usr/src/RPM/BUILD/linux-tools-5.9/kernel-source-5.9/tools/bpf/bpftool/Documentation'
[armh] make: *** [Makefile:201: doc] Error 2
2020-Nov-11 15:33:58 :: [armh] linux-tools.git 5.9-alt1: remote: build failed
2020-Nov-11 15:33:58 :: [armh] #500 linux-tools.git 5.9-alt1: build FAILED
2020-Nov-11 15:30:02 :: [i586] build FAILED
2020-Nov-11 15:30:08 :: [x86_64] build FAILED
2020-Nov-11 15:31:05 :: [ppc64le] build FAILED
2020-Nov-11 15:32:05 :: [aarch64] build FAILED
2020-Nov-11 15:33:58 :: [armh] build FAILED
2020-Nov-11 15:33:58 :: task #261560 for p9 FAILED
reply other threads:[~2020-11-11 15:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201111153358.GA2467776@gyle.mskdc.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=girar-builder-p9@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
--cc=vt@altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git