From: Girar Builder awaiter robot <girar-builder@altlinux.org>
To: Andrey Cherepanov <cas@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org, girar-builder-p9@altlinux.org
Subject: [#240329] p9 EPERM (try 2) hplip.git=3.19.11-alt1 epson-inkjet-printer-escpr.git=1.7.5-alt1 ...
Date: Thu, 7 Nov 2019 08:37:40 +0000
Message-ID: <20191107083739.GA30443@gyle.altlinux.org> (raw)
http://git.altlinux.org/tasks/240329/logs/events.2.1.log
2019-Nov-07 08:16:58 :: task #240329 for p9 resumed by cas:
#100 build 3.19.11-alt1 from /gears/h/hplip.git fetched at 2019-Nov-06 13:10:16
#200 build 1.7.5-alt1 from /gears/e/epson-inkjet-printer-escpr.git fetched at 2019-Nov-06 13:10:35
#300 build 1.1.2-alt1 from /gears/e/epson-inkjet-printer-escpr2.git fetched at 2019-Nov-06 13:10:39
#400 build 3.61.0-alt1 from /gears/i/imagescan.git fetched at 2019-Nov-06 13:11:02
#500 delete python-module-theano
2019-Nov-07 08:17:15 :: created build repo
2019-Nov-07 08:17:18 :: [aarch64] #100 hplip.git 3.19.11-alt1: build start
2019-Nov-07 08:17:18 :: [ppc64le] #100 hplip.git 3.19.11-alt1: build start
2019-Nov-07 08:17:18 :: [i586] #100 hplip.git 3.19.11-alt1: build start
2019-Nov-07 08:17:18 :: [x86_64] #100 hplip.git 3.19.11-alt1: build start
2019-Nov-07 08:17:47 :: [x86_64] hplip.git 3.19.11-alt1: remote: no need to rebuild
2019-Nov-07 08:17:47 :: [x86_64] #100 hplip.git 3.19.11-alt1: build OK
2019-Nov-07 08:17:47 :: [x86_64] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build start
2019-Nov-07 08:17:50 :: [i586] hplip.git 3.19.11-alt1: remote: no need to rebuild
2019-Nov-07 08:17:51 :: [i586] #100 hplip.git 3.19.11-alt1: build OK
2019-Nov-07 08:17:51 :: [i586] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build start
2019-Nov-07 08:17:53 :: [ppc64le] hplip.git 3.19.11-alt1: remote: no need to rebuild
2019-Nov-07 08:17:53 :: [ppc64le] #100 hplip.git 3.19.11-alt1: build OK
2019-Nov-07 08:17:53 :: [ppc64le] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build start
2019-Nov-07 08:18:01 :: [x86_64] epson-inkjet-printer-escpr.git 1.7.5-alt1: remote: no need to rebuild
2019-Nov-07 08:18:01 :: [x86_64] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build OK
2019-Nov-07 08:18:01 :: [x86_64] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build start
2019-Nov-07 08:18:08 :: [ppc64le] epson-inkjet-printer-escpr.git 1.7.5-alt1: remote: no need to rebuild
2019-Nov-07 08:18:08 :: [ppc64le] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build OK
2019-Nov-07 08:18:08 :: [ppc64le] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build start
2019-Nov-07 08:18:08 :: [i586] epson-inkjet-printer-escpr.git 1.7.5-alt1: remote: no need to rebuild
2019-Nov-07 08:18:08 :: [i586] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build OK
2019-Nov-07 08:18:08 :: [i586] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build start
2019-Nov-07 08:18:19 :: [x86_64] epson-inkjet-printer-escpr2.git 1.1.2-alt1: remote: no need to rebuild
2019-Nov-07 08:18:19 :: [x86_64] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build OK
2019-Nov-07 08:18:19 :: [x86_64] #400 imagescan.git 3.61.0-alt1: build start
2019-Nov-07 08:18:21 :: [ppc64le] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build SKIPPED
2019-Nov-07 08:18:21 :: [ppc64le] #400 imagescan.git 3.61.0-alt1: build start
2019-Nov-07 08:18:24 :: [i586] epson-inkjet-printer-escpr2.git 1.1.2-alt1: remote: no need to rebuild
2019-Nov-07 08:18:24 :: [i586] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build OK
2019-Nov-07 08:18:24 :: [i586] #400 imagescan.git 3.61.0-alt1: build start
2019-Nov-07 08:18:35 :: [x86_64] imagescan.git 3.61.0-alt1: remote: no need to rebuild
2019-Nov-07 08:18:35 :: [x86_64] #400 imagescan.git 3.61.0-alt1: build OK
2019-Nov-07 08:18:38 :: [ppc64le] imagescan.git 3.61.0-alt1: remote: no need to rebuild
2019-Nov-07 08:18:38 :: [ppc64le] #400 imagescan.git 3.61.0-alt1: build OK
2019-Nov-07 08:18:41 :: [i586] imagescan.git 3.61.0-alt1: remote: no need to rebuild
2019-Nov-07 08:18:42 :: [i586] #400 imagescan.git 3.61.0-alt1: build OK
2019-Nov-07 08:18:51 :: [aarch64] hplip.git 3.19.11-alt1: remote: no need to rebuild
2019-Nov-07 08:18:51 :: [aarch64] #100 hplip.git 3.19.11-alt1: build OK
2019-Nov-07 08:18:51 :: [aarch64] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build start
2019-Nov-07 08:19:48 :: [aarch64] epson-inkjet-printer-escpr.git 1.7.5-alt1: remote: no need to rebuild
2019-Nov-07 08:19:48 :: [aarch64] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build OK
2019-Nov-07 08:19:48 :: [aarch64] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build start
2019-Nov-07 08:20:43 :: [aarch64] epson-inkjet-printer-escpr2.git 1.1.2-alt1: remote: no need to rebuild
2019-Nov-07 08:20:43 :: [aarch64] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build OK
2019-Nov-07 08:20:43 :: [aarch64] #400 imagescan.git 3.61.0-alt1: build start
2019-Nov-07 08:21:40 :: [aarch64] imagescan.git 3.61.0-alt1: remote: no need to rebuild
2019-Nov-07 08:21:40 :: [aarch64] #400 imagescan.git 3.61.0-alt1: build OK
2019-Nov-07 08:22:25 :: #100: hplip.git 3.19.11-alt1: build check OK
2019-Nov-07 08:22:32 :: #200: epson-inkjet-printer-escpr.git 1.7.5-alt1: build check OK
2019-Nov-07 08:22:37 :: #300: epson-inkjet-printer-escpr2.git 1.1.2-alt1: build check OK
2019-Nov-07 08:22:50 :: #400: imagescan.git 3.61.0-alt1: build check OK
2019-Nov-07 08:22:51 :: build check OK
2019-Nov-07 08:23:42 :: noarch check OK
2019-Nov-07 08:23:44 :: plan: src +4 -5 =17816, aarch64 +16 -16 =29707, i586 +16 -16 =31959, noarch +7 -12 =18606, ppc64le +15 -15 =30038, x86_64 +16 -16 =32241
2019-Nov-07 08:23:44 :: version check OK
2019-Nov-07 08:23:45 :: hplip: closes bugs: 37289
2019-Nov-07 08:24:40 :: generated apt indices
2019-Nov-07 08:24:40 :: created next repo
2019-Nov-07 08:25:02 :: dependencies check OK
2019-Nov-07 08:28:42 :: [x86_64 i586 aarch64 ppc64le] ELF symbols check OK
x86_64: epson-inkjet-printer-escpr=1.7.5-alt1 post-install unowned files:
/usr/lib/cups
/usr/lib/cups/filter
/usr/share/cups
/usr/share/cups/model
2019-Nov-07 08:28:56 :: [x86_64] #200 epson-inkjet-printer-escpr: install check OK
i586: epson-inkjet-printer-escpr=1.7.5-alt1 post-install unowned files:
/usr/lib/cups
/usr/lib/cups/filter
/usr/share/cups
/usr/share/cups/model
2019-Nov-07 08:28:59 :: [i586] #200 epson-inkjet-printer-escpr: install check OK
x86_64: epson-inkjet-printer-escpr2=1.1.2-alt1 post-install unowned files:
/usr/lib/cups
/usr/lib/cups/filter
/usr/share/cups
/usr/share/cups/model
2019-Nov-07 08:29:02 :: [x86_64] #300 epson-inkjet-printer-escpr2: install check OK
i586: epson-inkjet-printer-escpr2=1.1.2-alt1 post-install unowned files:
/usr/lib/cups
/usr/lib/cups/filter
/usr/share/cups
/usr/share/cups/model
2019-Nov-07 08:29:04 :: [i586] #300 epson-inkjet-printer-escpr2: install check OK
2019-Nov-07 08:29:20 :: [x86_64] #100 hplip: install check OK
2019-Nov-07 08:29:26 :: [i586] #100 hplip: install check OK
2019-Nov-07 08:29:32 :: [x86_64] #100 hplip-PPDs: install check OK
2019-Nov-07 08:29:39 :: [x86_64] #100 hplip-common: install check OK
2019-Nov-07 08:29:43 :: [i586] #100 hplip-PPDs: install check OK
2019-Nov-07 08:29:48 :: [x86_64] #100 hplip-common-debuginfo: install check OK
2019-Nov-07 08:29:50 :: [i586] #100 hplip-common: install check OK
2019-Nov-07 08:30:02 :: [i586] #100 hplip-common-debuginfo: install check OK
2019-Nov-07 08:30:10 :: [x86_64] #100 hplip-debuginfo: install check OK
2019-Nov-07 08:30:27 :: [i586] #100 hplip-debuginfo: install check OK
2019-Nov-07 08:30:46 :: [x86_64] #100 hplip-gui: install check OK
2019-Nov-07 08:31:25 :: [i586] #100 hplip-gui: install check OK
2019-Nov-07 08:31:27 :: [x86_64] #100 hplip-gui-autostart: install check OK
2019-Nov-07 08:31:39 :: [x86_64] #100 hplip-hpcups: install check OK
x86_64: hplip-hpcups-PPDs=1:3.19.11-alt1 post-install unowned files:
/usr/share/ppd/HP
2019-Nov-07 08:31:51 :: [x86_64] #100 hplip-hpcups-PPDs: install check OK
2019-Nov-07 08:32:05 :: [i586] #100 hplip-gui-autostart: install check OK
2019-Nov-07 08:32:06 :: [x86_64] #100 hplip-hpcups-debuginfo: install check OK
x86_64: hplip-hpijs=1:3.19.11-alt1 post-install unowned files:
/usr/share/cups
/usr/share/cups/drv
2019-Nov-07 08:32:15 :: [x86_64] #100 hplip-hpijs: install check OK
2019-Nov-07 08:32:20 :: [i586] #100 hplip-hpcups: install check OK
x86_64: hplip-hpijs-PPDs=1:3.19.11-alt1 post-install unowned files:
/usr/share/ppd
/usr/share/ppd/HP
2019-Nov-07 08:32:25 :: [x86_64] #100 hplip-hpijs-PPDs: install check OK
i586: hplip-hpcups-PPDs=1:3.19.11-alt1 post-install unowned files:
/usr/share/ppd/HP
2019-Nov-07 08:32:36 :: [i586] #100 hplip-hpcups-PPDs: install check OK
2019-Nov-07 08:32:38 :: [x86_64] #100 hplip-hpijs-debuginfo: install check OK
x86_64: hplip-ps-PPDs=1:3.19.11-alt1 post-install unowned files:
/usr/share/ppd
/usr/share/ppd/HP
2019-Nov-07 08:32:43 :: [x86_64] #100 hplip-ps-PPDs: install check OK
2019-Nov-07 08:32:56 :: [i586] #100 hplip-hpcups-debuginfo: install check OK
i586: hplip-hpijs=1:3.19.11-alt1 post-install unowned files:
/usr/share/cups
/usr/share/cups/drv
2019-Nov-07 08:33:09 :: [i586] #100 hplip-hpijs: install check OK
i586: hplip-hpijs-PPDs=1:3.19.11-alt1 post-install unowned files:
/usr/share/ppd
/usr/share/ppd/HP
2019-Nov-07 08:33:21 :: [i586] #100 hplip-hpijs-PPDs: install check OK
2019-Nov-07 08:33:25 :: [x86_64] #100 hplip-recommends: install check OK
x86_64: hplip-sane=1:3.19.11-alt1 post-install unowned files:
/usr/share/hal
/usr/share/hal/fdi
/usr/share/hal/fdi/preprobe
/usr/share/hal/fdi/preprobe/10osvendor
2019-Nov-07 08:33:32 :: [x86_64] #100 hplip-sane: install check OK
2019-Nov-07 08:33:35 :: [i586] #100 hplip-hpijs-debuginfo: install check OK
2019-Nov-07 08:33:41 :: [x86_64] #100 hplip-sane-debuginfo: install check OK
i586: hplip-ps-PPDs=1:3.19.11-alt1 post-install unowned files:
/usr/share/ppd
/usr/share/ppd/HP
2019-Nov-07 08:33:42 :: [i586] #100 hplip-ps-PPDs: install check OK
x86_64: imagescan=3.61.0-alt1 post-install unowned files:
/etc/utsushi
2019-Nov-07 08:33:52 :: [x86_64] #400 imagescan: install check OK
2019-Nov-07 08:34:18 :: [i586] #100 hplip-recommends: install check OK
2019-Nov-07 08:34:23 :: [x86_64] #400 imagescan-debuginfo: install check OK
i586: hplip-sane=1:3.19.11-alt1 post-install unowned files:
/usr/share/hal
/usr/share/hal/fdi
/usr/share/hal/fdi/preprobe
/usr/share/hal/fdi/preprobe/10osvendor
2019-Nov-07 08:34:26 :: [i586] #100 hplip-sane: install check OK
x86_64: imagescan-sane=3.61.0-alt1 post-install unowned files:
/etc/sane.d
/etc/sane.d/dll.d
/usr/lib64/sane
/usr/lib64/utsushi
/usr/share/utsushi
2019-Nov-07 08:34:34 :: [x86_64] #400 imagescan-sane: install check OK
2019-Nov-07 08:34:38 :: [i586] #100 hplip-sane-debuginfo: install check OK
i586: imagescan=3.61.0-alt1 post-install unowned files:
/etc/utsushi
2019-Nov-07 08:34:52 :: [i586] #400 imagescan: install check OK
2019-Nov-07 08:34:58 :: [x86_64] #400 imagescan-sane-debuginfo: install check OK
2019-Nov-07 08:35:23 :: [i586] #400 imagescan-debuginfo: install check OK
i586: imagescan-sane=3.61.0-alt1 post-install unowned files:
/etc/sane.d
/etc/sane.d/dll.d
/usr/lib/sane
/usr/share/utsushi
2019-Nov-07 08:35:37 :: [i586] #400 imagescan-sane: install check OK
2019-Nov-07 08:36:03 :: [i586] #400 imagescan-sane-debuginfo: install check OK
2019-Nov-07 08:36:05 :: [x86_64-i586] plan: #7 +7 -7 =10629
2019-Nov-07 08:36:42 :: [x86_64-i586] arepo build OK
2019-Nov-07 08:37:27 :: [x86_64-i586] generated apt indices
2019-Nov-07 08:37:27 :: [x86_64-i586] created next repo
2019-Nov-07 08:37:36 :: [x86_64-i586] dependencies check OK
2019-Nov-07 08:37:39 :: gears inheritance check OK
2019-Nov-07 08:37:39 :: srpm inheritance check OK
girar-check-perms: access to @maint ALLOWED for cas: member of approved group
check-subtask-perms: #100: hplip: allowed for cas, needs an approval from a member of @tester group
girar-check-perms: access to @maint ALLOWED for cas: member of approved group
check-subtask-perms: #200: epson-inkjet-printer-escpr: allowed for cas, needs an approval from a member of @tester group
girar-check-perms: access to @maint ALLOWED for cas: member of approved group
check-subtask-perms: #300: epson-inkjet-printer-escpr2: allowed for cas, needs an approval from a member of @tester group
girar-check-perms: access to @maint ALLOWED for cas: member of approved group
check-subtask-perms: #400: imagescan: allowed for cas, needs an approval from a member of @tester group
girar-check-perms: access to @maint ALLOWED for cas: member of approved group
check-subtask-perms: #500: python-module-theano: allowed for cas, needs an approval from a member of @tester group
2019-Nov-07 08:37:39 :: acl check FAILED
2019-Nov-07 08:37:39 :: task #240329 for p9 EPERM
reply other threads:[~2019-11-07 8:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191107083739.GA30443@gyle.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=cas@altlinux.org \
--cc=girar-builder-p9@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git