From: Girar Builder pender robot <girar-builder@altlinux.org>
To: Cronport Service <cronport@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org, girar-builder-p8@altlinux.org
Subject: [#221498] p8 DONE (try 2) srpm=perl-RPM-Source-Editor-0.9231-alt1.src.rpm ...
Date: Thu, 14 Feb 2019 18:33:49 +0000
Message-ID: <20190214183349.GA14717@gyle.altlinux.org> (raw)
http://git.altlinux.org/tasks/archive/done/_216/221498/logs/events.2.1.log
2019-Feb-14 18:22:35 :: task #221498 for p8 resumed by sotor:
#100 build perl-RPM-Source-Editor-0.9231-alt1.src.rpm
#200 build perl-RPM-Source-BundleImport-0.072-alt1.src.rpm
#300 build 2.001-alt1 from /gears/g/girar-nmu.git fetched at 2019-Feb-14 03:07:09
#400 build perl-RPM-Source-Update-0.001-alt1.src.rpm
2019-Feb-14 18:22:35 :: waiting for a shared lock on p8
2019-Feb-14 18:24:18 :: acquired a shared lock on p8
2019-Feb-14 18:24:40 :: created build repo
2019-Feb-14 18:24:41 :: [i586] #100 perl-RPM-Source-Editor-0.9231-alt1.src.rpm: build start
2019-Feb-14 18:24:41 :: [x86_64] #100 perl-RPM-Source-Editor-0.9231-alt1.src.rpm: build start
2019-Feb-14 18:25:28 :: [i586] perl-RPM-Source-Editor-0.9231-alt1.src.rpm: remote: no need to rebuild
2019-Feb-14 18:25:28 :: [i586] #100 perl-RPM-Source-Editor-0.9231-alt1.src.rpm: build OK
2019-Feb-14 18:25:28 :: [i586] #200 perl-RPM-Source-BundleImport-0.072-alt1.src.rpm: build start
2019-Feb-14 18:25:33 :: [x86_64] perl-RPM-Source-Editor-0.9231-alt1.src.rpm: remote: no need to rebuild
2019-Feb-14 18:25:33 :: [x86_64] #100 perl-RPM-Source-Editor-0.9231-alt1.src.rpm: build OK
2019-Feb-14 18:25:33 :: [x86_64] #200 perl-RPM-Source-BundleImport-0.072-alt1.src.rpm: build start
2019-Feb-14 18:25:56 :: [i586] perl-RPM-Source-BundleImport-0.072-alt1.src.rpm: remote: no need to rebuild
2019-Feb-14 18:25:56 :: [x86_64] perl-RPM-Source-BundleImport-0.072-alt1.src.rpm: remote: no need to rebuild
2019-Feb-14 18:25:59 :: [i586] #200 perl-RPM-Source-BundleImport-0.072-alt1.src.rpm: build OK
2019-Feb-14 18:25:59 :: [i586] #300 girar-nmu.git 2.001-alt1: build start
2019-Feb-14 18:25:59 :: [x86_64] #200 perl-RPM-Source-BundleImport-0.072-alt1.src.rpm: build OK
2019-Feb-14 18:26:00 :: [x86_64] #300 girar-nmu.git 2.001-alt1: build start
2019-Feb-14 18:26:30 :: [i586] girar-nmu.git 2.001-alt1: remote: no need to rebuild
2019-Feb-14 18:26:30 :: [i586] #300 girar-nmu.git 2.001-alt1: build OK
2019-Feb-14 18:26:30 :: [i586] #400 perl-RPM-Source-Update-0.001-alt1.src.rpm: build start
2019-Feb-14 18:26:35 :: [x86_64] girar-nmu.git 2.001-alt1: remote: no need to rebuild
2019-Feb-14 18:26:35 :: [x86_64] #300 girar-nmu.git 2.001-alt1: build OK
2019-Feb-14 18:26:35 :: [x86_64] #400 perl-RPM-Source-Update-0.001-alt1.src.rpm: build start
2019-Feb-14 18:27:00 :: [i586] perl-RPM-Source-Update-0.001-alt1.src.rpm: remote: no need to rebuild
2019-Feb-14 18:27:00 :: [i586] #400 perl-RPM-Source-Update-0.001-alt1.src.rpm: build OK
2019-Feb-14 18:27:03 :: [x86_64] perl-RPM-Source-Update-0.001-alt1.src.rpm: remote: no need to rebuild
2019-Feb-14 18:27:03 :: [x86_64] #400 perl-RPM-Source-Update-0.001-alt1.src.rpm: build OK
2019-Feb-14 18:27:25 :: build check OK
2019-Feb-14 18:27:25 :: noarch check OK
2019-Feb-14 18:27:27 :: plan: src +4 -3 =18180, i586 +2 -2 =35216, noarch +5 -3 =17835, x86_64 +2 -2 =35208
2019-Feb-14 18:27:27 :: version check OK
2019-Feb-14 18:28:25 :: generated apt indices
2019-Feb-14 18:28:25 :: created next repo
2019-Feb-14 18:28:38 :: dependencies check OK
2019-Feb-14 18:29:30 :: ELF symbols check OK
2019-Feb-14 18:29:47 :: [i586] #300 girar-nmu: no need to repeat, install check SKIPPED
2019-Feb-14 18:29:49 :: [x86_64] #300 girar-nmu: no need to repeat, install check SKIPPED
2019-Feb-14 18:30:01 :: [i586] #300 girar-nmu-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-14 18:30:03 :: [x86_64] #300 girar-nmu-debuginfo: no need to repeat, install check SKIPPED
i586: girar-tools=2.001-alt1 post-install unowned files:
/etc/girar-nmu
2019-Feb-14 18:30:13 :: [i586] #300 girar-tools: no need to repeat, install check SKIPPED
x86_64: girar-tools=2.001-alt1 post-install unowned files:
/etc/girar-nmu
2019-Feb-14 18:30:16 :: [x86_64] #300 girar-tools: no need to repeat, install check SKIPPED
2019-Feb-14 18:30:27 :: [i586] #200 perl-RPM-Source-BundleImport: no need to repeat, install check SKIPPED
2019-Feb-14 18:30:30 :: [x86_64] #200 perl-RPM-Source-BundleImport: no need to repeat, install check SKIPPED
i586: perl-RPM-Source-BundleImport-Perl=0.072-alt1 post-install unowned files:
/usr/share/perl5/RPM
/usr/share/perl5/RPM/Source
/usr/share/perl5/RPM/Source/BundleImport
2019-Feb-14 18:30:40 :: [i586] #200 perl-RPM-Source-BundleImport-Perl: no need to repeat, install check SKIPPED
x86_64: perl-RPM-Source-BundleImport-Perl=0.072-alt1 post-install unowned files:
/usr/share/perl5/RPM
/usr/share/perl5/RPM/Source
/usr/share/perl5/RPM/Source/BundleImport
2019-Feb-14 18:30:44 :: [x86_64] #200 perl-RPM-Source-BundleImport-Perl: no need to repeat, install check SKIPPED
warning [i586]: perl-RPM-Source-Editor=0.9231-alt1: circular dependencies on perl-Gear-Rules=0.197-alt1
2019-Feb-14 18:30:53 :: [i586] #100 perl-RPM-Source-Editor: no need to repeat, install check SKIPPED
warning [x86_64]: perl-RPM-Source-Editor=0.9231-alt1: circular dependencies on perl-Gear-Rules=0.197-alt1
2019-Feb-14 18:30:58 :: [x86_64] #100 perl-RPM-Source-Editor: no need to repeat, install check SKIPPED
2019-Feb-14 18:31:06 :: [i586] #400 perl-RPM-Source-Update: no need to repeat, install check SKIPPED
2019-Feb-14 18:31:12 :: [x86_64] #400 perl-RPM-Source-Update: no need to repeat, install check SKIPPED
2019-Feb-14 18:32:04 :: [x86_64-i586] generated apt indices
2019-Feb-14 18:32:04 :: [x86_64-i586] created next repo
2019-Feb-14 18:32:13 :: [x86_64-i586] dependencies check OK
2019-Feb-14 18:32:13 :: gears inheritance check OK
girar-nmu-2.001-alt1.src.rpm: missing last changelog entry from girar-nmu-1.999-alt0.M80P.1.src.rpm:
* Thu Feb 07 2019 cronport@altlinux 1.999-alt0
2019-Feb-14 18:32:13 :: srpm inheritance check COND-OK
girar-check-perms: access to perl-RPM-Source-Editor DENIED for cronport: project `perl-RPM-Source-Editor' is not listed in acl file for repository `p8'
girar-check-perms: access to perl-RPM-Source-Editor ALLOWED for sotor: superuser
perl-RPM-Source-Editor: Update approved by sotor
girar-check-perms: access to perl-RPM-Source-BundleImport DENIED for cronport: project `perl-RPM-Source-BundleImport' is not listed in acl file for repository `p8'
girar-check-perms: access to perl-RPM-Source-BundleImport ALLOWED for sotor: superuser
perl-RPM-Source-BundleImport: Update approved by sotor
girar-check-perms: access to girar-nmu DENIED for cronport: project `girar-nmu' is not listed in acl file for repository `p8'
girar-check-perms: access to girar-nmu ALLOWED for sotor: superuser
girar-nmu: Update approved by sotor
girar-check-perms: access to perl-RPM-Source-Update DENIED for cronport: project `perl-RPM-Source-Update' is not listed in acl file for repository `p8'
girar-check-perms: access to perl-RPM-Source-Update ALLOWED for sotor: superuser
perl-RPM-Source-Update: Update approved by sotor
2019-Feb-14 18:32:13 :: acl check OK
2019-Feb-14 18:32:39 :: created contents_index files
2019-Feb-14 18:32:47 :: created hash files: i586 noarch src x86_64
2019-Feb-14 18:32:48 :: task #221498 for p8 TESTED
2019-Feb-14 18:32:48 :: task is ready for commit
2019-Feb-14 18:32:53 :: repo clone OK
2019-Feb-14 18:32:54 :: packages update OK
2019-Feb-14 18:32:58 :: [i586 x86_64 noarch] update OK
2019-Feb-14 18:32:58 :: repo update OK
2019-Feb-14 18:33:09 :: repo save OK
2019-Feb-14 18:33:12 :: created /gears/g/girar-nmu.git branch `p8'
fatal: tag '0.072-alt1' already exists
2019-Feb-14 18:33:19 :: updated /srpms/p/perl-RPM-Source-BundleImport.git branch `p8'
fatal: no tag exactly matches 'b7a0e0c2b7c8ec67164366b87c19354ad96790c5'
fatal: tag '0.9231-alt1' already exists
2019-Feb-14 18:33:20 :: updated /srpms/p/perl-RPM-Source-Editor.git branch `p8'
fatal: no tag exactly matches 'c05fd8f83ed5ccd8a265c46395a24dc8c4a78575'
2019-Feb-14 18:33:20 :: created /srpms/p/perl-RPM-Source-Update.git branch `p8'
2019-Feb-14 18:33:48 :: gears update OK
2019-Feb-14 18:33:48 :: task #221498 for p8 DONE
reply other threads:[~2019-02-14 18:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190214183349.GA14717@gyle.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=cronport@altlinux.org \
--cc=girar-builder-p8@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git