From: Girar Builder awaiter robot <girar-builder@altlinux.org>
To: Anton Farygin <rider@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org
Subject: [#219299] FAILED wireshark.git=2.6.6-alt1
Date: Sun, 13 Jan 2019 11:31:05 +0000
Message-ID: <20190113113105.GA3091@gyle.altlinux.org> (raw)
http://git.altlinux.org/tasks/219299/logs/events.1.1.log
2019-Jan-13 10:31:16 :: task #219299 for sisyphus started by rider:
#100 build 2.6.6-alt1 from /people/rider/packages/wireshark.git fetched at 2019-Jan-13 10:31:16
2019-Jan-13 10:31:17 :: [i586] #100 wireshark.git 2.6.6-alt1: build start
2019-Jan-13 10:31:17 :: [aarch64] #100 wireshark.git 2.6.6-alt1: build start
2019-Jan-13 10:31:17 :: [x86_64] #100 wireshark.git 2.6.6-alt1: build start
2019-Jan-13 10:48:20 :: [x86_64] #100 wireshark.git 2.6.6-alt1: build OK
2019-Jan-13 10:48:43 :: [i586] #100 wireshark.git 2.6.6-alt1: build OK
2019-Jan-13 11:13:02 :: [aarch64] #100 wireshark.git 2.6.6-alt1: build OK
2019-Jan-13 11:13:30 :: build check OK
2019-Jan-13 11:14:41 :: noarch check OK
2019-Jan-13 11:14:42 :: plan: src +1 -1 =18490, aarch64 +10 -10 =29403, i586 +10 -10 =32985, noarch +1 -1 =19006, x86_64 +10 -10 =33130
2019-Jan-13 11:14:42 :: version check OK
2019-Jan-13 11:14:42 :: wireshark: mentions vulnerabilities: CVE-2019-5716 CVE-2019-5717 CVE-2019-5718 CVE-2019-5719
2019-Jan-13 11:15:39 :: generated apt indices
2019-Jan-13 11:15:39 :: created next repo
2019-Jan-13 11:15:59 :: dependencies check OK
2019-Jan-13 11:18:03 :: ELF symbols check OK
x86_64: libwiretap=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark libwiretap
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 10000 as a solution to wireshark-base 0
Holding Back wireshark-base rather than change libwiretap
Investigating libwiretap
Package libwiretap has broken dep on wireshark-base
Considering wireshark-base 0 as a solution to libwiretap 10000
Reinst Failed because of protected libwiretap
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libwiretap: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:18:26 :: [x86_64] #100 libwiretap: install check FAILED
i586: libwiretap=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark libwiretap
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 10000 as a solution to wireshark-base 0
Holding Back wireshark-base rather than change libwiretap
Investigating libwiretap
Package libwiretap has broken dep on wireshark-base
Considering wireshark-base 0 as a solution to libwiretap 10000
Reinst Failed because of protected libwiretap
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libwiretap: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:18:26 :: [i586] #100 libwiretap: install check FAILED
x86_64: libwiretap-debuginfo=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark libwiretap-debuginfo
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: delete libwiretap
MI2a: target wireshark-base-debuginfo
MI2a: mark wireshark-base-debuginfo
Starting
Starting 2
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 2 as a solution to libwiretap-debuginfo 10000
Re-Instated libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 2 as a solution to wireshark-base 0
Holding Back wireshark-base rather than change libwiretap
Investigating libwiretap
Package libwiretap has broken dep on wireshark-base
Considering wireshark-base 0 as a solution to libwiretap 2
Holding Back libwiretap rather than change wireshark-base
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 0 as a solution to wireshark-base-debuginfo 0
Holding Back wireshark-base-debuginfo rather than change wireshark-base
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 2 as a solution to libwiretap-debuginfo 10000
Package libwiretap-debuginfo has broken dep on wireshark-base-debuginfo
Considering wireshark-base-debuginfo 0 as a solution to libwiretap-debuginfo 10000
Reinst Failed because of libwiretap
Reinst Failed because of wireshark-base
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libwiretap-debuginfo: Depends: libwiretap (= 2.6.6-alt1:sisyphus.219299.100)
Depends: wireshark-base-debuginfo (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:18:52 :: [x86_64] #100 libwiretap-debuginfo: install check FAILED
i586: libwiretap-debuginfo=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark libwiretap-debuginfo
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: delete libwiretap
MI2a: target wireshark-base-debuginfo
MI2a: mark wireshark-base-debuginfo
Starting
Starting 2
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 2 as a solution to libwiretap-debuginfo 10000
Re-Instated libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 2 as a solution to wireshark-base 0
Holding Back wireshark-base rather than change libwiretap
Investigating libwiretap
Package libwiretap has broken dep on wireshark-base
Considering wireshark-base 0 as a solution to libwiretap 2
Holding Back libwiretap rather than change wireshark-base
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 0 as a solution to wireshark-base-debuginfo 0
Holding Back wireshark-base-debuginfo rather than change wireshark-base
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 2 as a solution to libwiretap-debuginfo 10000
Package libwiretap-debuginfo has broken dep on wireshark-base-debuginfo
Considering wireshark-base-debuginfo 0 as a solution to libwiretap-debuginfo 10000
Reinst Failed because of libwiretap
Reinst Failed because of wireshark-base
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libwiretap-debuginfo: Depends: libwiretap (= 2.6.6-alt1:sisyphus.219299.100)
Depends: wireshark-base-debuginfo (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:18:53 :: [i586] #100 libwiretap-debuginfo: install check FAILED
aarch64: libwiretap=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark libwiretap
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 10000 as a solution to wireshark-base 0
Holding Back wireshark-base rather than change libwiretap
Investigating libwiretap
Package libwiretap has broken dep on wireshark-base
Considering wireshark-base 0 as a solution to libwiretap 10000
Reinst Failed because of protected libwiretap
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libwiretap: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:19:03 :: [aarch64] #100 libwiretap: install check FAILED
x86_64: libwiretap-devel=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark libwiretap-devel
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: delete libwiretap
Starting
Starting 2
Investigating libwiretap-devel
Package libwiretap-devel has broken dep on libwiretap
Considering libwiretap 2 as a solution to libwiretap-devel 9999
Re-Instated libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 2 as a solution to wireshark-base -1
Holding Back wireshark-base rather than change libwiretap
Investigating libwiretap
Package libwiretap has broken dep on wireshark-base
Considering wireshark-base -1 as a solution to libwiretap 2
Holding Back libwiretap rather than change wireshark-base
Investigating libwiretap-devel
Package libwiretap-devel has broken dep on libwiretap
Considering libwiretap 2 as a solution to libwiretap-devel 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libwiretap-devel: Depends: libwiretap (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:19:10 :: [x86_64] #100 libwiretap-devel: install check FAILED
i586: libwiretap-devel=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark libwiretap-devel
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: delete libwiretap
Starting
Starting 2
Investigating libwiretap-devel
Package libwiretap-devel has broken dep on libwiretap
Considering libwiretap 2 as a solution to libwiretap-devel 9999
Re-Instated libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 2 as a solution to wireshark-base -1
Holding Back wireshark-base rather than change libwiretap
Investigating libwiretap
Package libwiretap has broken dep on wireshark-base
Considering wireshark-base -1 as a solution to libwiretap 2
Holding Back libwiretap rather than change wireshark-base
Investigating libwiretap-devel
Package libwiretap-devel has broken dep on libwiretap
Considering libwiretap 2 as a solution to libwiretap-devel 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libwiretap-devel: Depends: libwiretap (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:19:11 :: [i586] #100 libwiretap-devel: install check FAILED
x86_64: tshark=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark tshark
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating tshark
Package tshark has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to tshark 9999
Re-Instated libwiretap
Re-Instated wireshark-base
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating tshark
Package tshark has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to tshark 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
tshark: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:19:29 :: [x86_64] #100 tshark: install check FAILED
i586: tshark=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark tshark
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating tshark
Package tshark has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to tshark 9999
Re-Instated libwiretap
Re-Instated wireshark-base
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating tshark
Package tshark has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to tshark 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
tshark: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:19:29 :: [i586] #100 tshark: install check FAILED
x86_64: tshark-debuginfo=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark tshark-debuginfo
MI2a: target tshark
MI2a: mark tshark
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
MI2a: target wireshark-base-debuginfo
MI2a: mark wireshark-base-debuginfo
MI2a: target libwiretap-debuginfo
MI2a: mark libwiretap-debuginfo
MI2a: target libwiretap
MI2a: mark libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 5 as a solution to wireshark-base 6
Re-Instated libwiretap
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 5 as a solution to libwiretap-debuginfo 2
Holding Back libwiretap-debuginfo rather than change libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 5 as a solution to wireshark-base 6
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 6 as a solution to wireshark-base-debuginfo 3
Holding Back wireshark-base-debuginfo rather than change wireshark-base
Investigating tshark
Package tshark has broken dep on wireshark-base
Considering wireshark-base 6 as a solution to tshark 2
Holding Back tshark rather than change wireshark-base
Investigating tshark-debuginfo
Package tshark-debuginfo has broken dep on tshark
Considering tshark 2 as a solution to tshark-debuginfo 9999
Reinst Failed because of libwiretap
Reinst Failed because of wireshark-base
Package tshark-debuginfo has broken dep on wireshark-base-debuginfo
Considering wireshark-base-debuginfo 3 as a solution to tshark-debuginfo 9999
Reinst Failed because of wireshark-base
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
tshark-debuginfo: Depends: tshark (= 2.6.6-alt1:sisyphus.219299.100)
Depends: wireshark-base-debuginfo (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:19:53 :: [x86_64] #100 tshark-debuginfo: install check FAILED
i586: tshark-debuginfo=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark tshark-debuginfo
MI2a: target tshark
MI2a: mark tshark
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
MI2a: target wireshark-base-debuginfo
MI2a: mark wireshark-base-debuginfo
MI2a: target libwiretap-debuginfo
MI2a: mark libwiretap-debuginfo
MI2a: target libwiretap
MI2a: mark libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 5 as a solution to wireshark-base 6
Re-Instated libwiretap
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 5 as a solution to libwiretap-debuginfo 2
Holding Back libwiretap-debuginfo rather than change libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 5 as a solution to wireshark-base 6
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 6 as a solution to wireshark-base-debuginfo 3
Holding Back wireshark-base-debuginfo rather than change wireshark-base
Investigating tshark
Package tshark has broken dep on wireshark-base
Considering wireshark-base 6 as a solution to tshark 2
Holding Back tshark rather than change wireshark-base
Investigating tshark-debuginfo
Package tshark-debuginfo has broken dep on tshark
Considering tshark 2 as a solution to tshark-debuginfo 9999
Reinst Failed because of libwiretap
Reinst Failed because of wireshark-base
Package tshark-debuginfo has broken dep on wireshark-base-debuginfo
Considering wireshark-base-debuginfo 3 as a solution to tshark-debuginfo 9999
Reinst Failed because of wireshark-base
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
tshark-debuginfo: Depends: tshark (= 2.6.6-alt1:sisyphus.219299.100)
Depends: wireshark-base-debuginfo (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:19:54 :: [i586] #100 tshark-debuginfo: install check FAILED
aarch64: libwiretap-debuginfo=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark libwiretap-debuginfo
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: delete libwiretap
MI2a: target wireshark-base-debuginfo
MI2a: mark wireshark-base-debuginfo
Starting
Starting 2
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 2 as a solution to libwiretap-debuginfo 10000
Re-Instated libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 2 as a solution to wireshark-base 0
Holding Back wireshark-base rather than change libwiretap
Investigating libwiretap
Package libwiretap has broken dep on wireshark-base
Considering wireshark-base 0 as a solution to libwiretap 2
Holding Back libwiretap rather than change wireshark-base
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 0 as a solution to wireshark-base-debuginfo 0
Holding Back wireshark-base-debuginfo rather than change wireshark-base
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 2 as a solution to libwiretap-debuginfo 10000
Package libwiretap-debuginfo has broken dep on wireshark-base-debuginfo
Considering wireshark-base-debuginfo 0 as a solution to libwiretap-debuginfo 10000
Reinst Failed because of libwiretap
Reinst Failed because of wireshark-base
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libwiretap-debuginfo: Depends: libwiretap (= 2.6.6-alt1:sisyphus.219299.100)
Depends: wireshark-base-debuginfo (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:20:03 :: [aarch64] #100 libwiretap-debuginfo: install check FAILED
x86_64: wireshark-base=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 9999
Re-Instated libwiretap
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 9999
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-base: Depends: libwiretap (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:20:11 :: [x86_64] #100 wireshark-base: install check FAILED
i586: wireshark-base=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 9999
Re-Instated libwiretap
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 9999
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-base: Depends: libwiretap (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:20:12 :: [i586] #100 wireshark-base: install check FAILED
x86_64: wireshark-base-debuginfo=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-base-debuginfo
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
MI2a: target libwiretap-debuginfo
MI2a: mark libwiretap-debuginfo
MI2a: target libwiretap
MI2a: mark libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 3 as a solution to wireshark-base 3
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 3 as a solution to wireshark-base-debuginfo 10000
Re-Instated wireshark-base
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 3 as a solution to wireshark-base 3
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 3 as a solution to wireshark-base-debuginfo 10000
Investigating libwiretap
Package libwiretap has broken dep on wireshark-base
Considering wireshark-base 3 as a solution to libwiretap 3
Holding Back libwiretap rather than change wireshark-base
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 3 as a solution to libwiretap-debuginfo 0
Holding Back libwiretap-debuginfo rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 3 as a solution to wireshark-base-debuginfo 10000
Package wireshark-base-debuginfo has broken dep on libwiretap-debuginfo
Considering libwiretap-debuginfo 0 as a solution to wireshark-base-debuginfo 10000
Reinst Failed because of wireshark-base
Reinst Failed because of libwiretap
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-base-debuginfo: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
Depends: libwiretap-debuginfo (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:20:35 :: [x86_64] #100 wireshark-base-debuginfo: install check FAILED
i586: wireshark-base-debuginfo=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-base-debuginfo
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
MI2a: target libwiretap-debuginfo
MI2a: mark libwiretap-debuginfo
MI2a: target libwiretap
MI2a: mark libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 3 as a solution to wireshark-base 3
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 3 as a solution to wireshark-base-debuginfo 10000
Re-Instated wireshark-base
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 3 as a solution to wireshark-base 3
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 3 as a solution to wireshark-base-debuginfo 10000
Investigating libwiretap
Package libwiretap has broken dep on wireshark-base
Considering wireshark-base 3 as a solution to libwiretap 3
Holding Back libwiretap rather than change wireshark-base
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 3 as a solution to libwiretap-debuginfo 0
Holding Back libwiretap-debuginfo rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 3 as a solution to wireshark-base-debuginfo 10000
Package wireshark-base-debuginfo has broken dep on libwiretap-debuginfo
Considering libwiretap-debuginfo 0 as a solution to wireshark-base-debuginfo 10000
Reinst Failed because of wireshark-base
Reinst Failed because of libwiretap
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-base-debuginfo: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
Depends: libwiretap-debuginfo (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:20:36 :: [i586] #100 wireshark-base-debuginfo: install check FAILED
aarch64: libwiretap-devel=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark libwiretap-devel
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: delete libwiretap
Starting
Starting 2
Investigating libwiretap-devel
Package libwiretap-devel has broken dep on libwiretap
Considering libwiretap 2 as a solution to libwiretap-devel 9999
Re-Instated libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 2 as a solution to wireshark-base -1
Holding Back wireshark-base rather than change libwiretap
Investigating libwiretap
Package libwiretap has broken dep on wireshark-base
Considering wireshark-base -1 as a solution to libwiretap 2
Holding Back libwiretap rather than change wireshark-base
Investigating libwiretap-devel
Package libwiretap-devel has broken dep on libwiretap
Considering libwiretap 2 as a solution to libwiretap-devel 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libwiretap-devel: Depends: libwiretap (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:20:53 :: [aarch64] #100 libwiretap-devel: install check FAILED
x86_64: wireshark-devel=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-devel
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-devel
Package wireshark-devel has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to wireshark-devel 9999
Re-Instated libwiretap
Re-Instated wireshark-base
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-devel
Package wireshark-devel has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to wireshark-devel 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-devel: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:20:54 :: [x86_64] #100 wireshark-devel: install check FAILED
i586: wireshark-devel=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-devel
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-devel
Package wireshark-devel has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to wireshark-devel 9999
Re-Instated libwiretap
Re-Instated wireshark-base
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-devel
Package wireshark-devel has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to wireshark-devel 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-devel: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:20:56 :: [i586] #100 wireshark-devel: install check FAILED
2019-Jan-13 11:21:11 :: [x86_64] #100 wireshark-doc: install check OK
2019-Jan-13 11:21:13 :: [i586] #100 wireshark-doc: install check OK
aarch64: tshark=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark tshark
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating tshark
Package tshark has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to tshark 9999
Re-Instated libwiretap
Re-Instated wireshark-base
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating tshark
Package tshark has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to tshark 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
tshark: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:21:43 :: [aarch64] #100 tshark: install check FAILED
x86_64: wireshark-qt5=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-qt5
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-qt5
Package wireshark-qt5 has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to wireshark-qt5 9999
Re-Instated libwiretap
Re-Instated wireshark-base
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-qt5
Package wireshark-qt5 has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to wireshark-qt5 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-qt5: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:21:47 :: [x86_64] #100 wireshark-qt5: install check FAILED
i586: wireshark-qt5=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-qt5
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-qt5
Package wireshark-qt5 has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to wireshark-qt5 9999
Re-Instated libwiretap
Re-Instated wireshark-base
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-qt5
Package wireshark-qt5 has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to wireshark-qt5 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-qt5: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:21:50 :: [i586] #100 wireshark-qt5: install check FAILED
aarch64: tshark-debuginfo=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark tshark-debuginfo
MI2a: target tshark
MI2a: mark tshark
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
MI2a: target wireshark-base-debuginfo
MI2a: mark wireshark-base-debuginfo
MI2a: target libwiretap-debuginfo
MI2a: mark libwiretap-debuginfo
MI2a: target libwiretap
MI2a: mark libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 5 as a solution to wireshark-base 6
Re-Instated libwiretap
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 5 as a solution to libwiretap-debuginfo 2
Holding Back libwiretap-debuginfo rather than change libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 5 as a solution to wireshark-base 6
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 6 as a solution to wireshark-base-debuginfo 3
Holding Back wireshark-base-debuginfo rather than change wireshark-base
Investigating tshark
Package tshark has broken dep on wireshark-base
Considering wireshark-base 6 as a solution to tshark 2
Holding Back tshark rather than change wireshark-base
Investigating tshark-debuginfo
Package tshark-debuginfo has broken dep on tshark
Considering tshark 2 as a solution to tshark-debuginfo 9999
Reinst Failed because of libwiretap
Reinst Failed because of wireshark-base
Package tshark-debuginfo has broken dep on wireshark-base-debuginfo
Considering wireshark-base-debuginfo 3 as a solution to tshark-debuginfo 9999
Reinst Failed because of wireshark-base
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
tshark-debuginfo: Depends: tshark (= 2.6.6-alt1:sisyphus.219299.100)
Depends: wireshark-base-debuginfo (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:22:45 :: [aarch64] #100 tshark-debuginfo: install check FAILED
aarch64: wireshark-base=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 9999
Re-Instated libwiretap
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 9999
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-base: Depends: libwiretap (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:23:35 :: [aarch64] #100 wireshark-base: install check FAILED
x86_64: wireshark-qt5-debuginfo=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-qt5-debuginfo
MI2a: target wireshark-qt5
MI2a: mark wireshark-qt5
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
MI2a: target wireshark-base-debuginfo
MI2a: mark wireshark-base-debuginfo
MI2a: target libwiretap-debuginfo
MI2a: mark libwiretap-debuginfo
MI2a: target libwiretap
MI2a: mark libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 5 as a solution to wireshark-base 6
Re-Instated libwiretap
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 5 as a solution to libwiretap-debuginfo 2
Holding Back libwiretap-debuginfo rather than change libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 5 as a solution to wireshark-base 6
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 6 as a solution to wireshark-base-debuginfo 3
Holding Back wireshark-base-debuginfo rather than change wireshark-base
Investigating wireshark-qt5
Package wireshark-qt5 has broken dep on wireshark-base
Considering wireshark-base 6 as a solution to wireshark-qt5 2
Holding Back wireshark-qt5 rather than change wireshark-base
Investigating wireshark-qt5-debuginfo
Package wireshark-qt5-debuginfo has broken dep on wireshark-qt5
Considering wireshark-qt5 2 as a solution to wireshark-qt5-debuginfo 9999
Reinst Failed because of libwiretap
Reinst Failed because of wireshark-base
Package wireshark-qt5-debuginfo has broken dep on wireshark-base-debuginfo
Considering wireshark-base-debuginfo 3 as a solution to wireshark-qt5-debuginfo 9999
Reinst Failed because of wireshark-base
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-qt5-debuginfo: Depends: wireshark-qt5 (= 2.6.6-alt1:sisyphus.219299.100)
Depends: wireshark-base-debuginfo (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:23:48 :: [x86_64] #100 wireshark-qt5-debuginfo: install check FAILED
i586: wireshark-qt5-debuginfo=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-qt5-debuginfo
MI2a: target wireshark-qt5
MI2a: mark wireshark-qt5
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
MI2a: target wireshark-base-debuginfo
MI2a: mark wireshark-base-debuginfo
MI2a: target libwiretap-debuginfo
MI2a: mark libwiretap-debuginfo
MI2a: target libwiretap
MI2a: mark libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 5 as a solution to wireshark-base 6
Re-Instated libwiretap
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 5 as a solution to libwiretap-debuginfo 2
Holding Back libwiretap-debuginfo rather than change libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 5 as a solution to wireshark-base 6
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 6 as a solution to wireshark-base-debuginfo 3
Holding Back wireshark-base-debuginfo rather than change wireshark-base
Investigating wireshark-qt5
Package wireshark-qt5 has broken dep on wireshark-base
Considering wireshark-base 6 as a solution to wireshark-qt5 2
Holding Back wireshark-qt5 rather than change wireshark-base
Investigating wireshark-qt5-debuginfo
Package wireshark-qt5-debuginfo has broken dep on wireshark-qt5
Considering wireshark-qt5 2 as a solution to wireshark-qt5-debuginfo 9999
Reinst Failed because of libwiretap
Reinst Failed because of wireshark-base
Package wireshark-qt5-debuginfo has broken dep on wireshark-base-debuginfo
Considering wireshark-base-debuginfo 3 as a solution to wireshark-qt5-debuginfo 9999
Reinst Failed because of wireshark-base
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-qt5-debuginfo: Depends: wireshark-qt5 (= 2.6.6-alt1:sisyphus.219299.100)
Depends: wireshark-base-debuginfo (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:24:02 :: [i586] #100 wireshark-qt5-debuginfo: install check FAILED
aarch64: wireshark-base-debuginfo=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-base-debuginfo
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
MI2a: target libwiretap-debuginfo
MI2a: mark libwiretap-debuginfo
MI2a: target libwiretap
MI2a: mark libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 3 as a solution to wireshark-base 3
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 3 as a solution to wireshark-base-debuginfo 10000
Re-Instated wireshark-base
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 3 as a solution to wireshark-base 3
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 3 as a solution to wireshark-base-debuginfo 10000
Investigating libwiretap
Package libwiretap has broken dep on wireshark-base
Considering wireshark-base 3 as a solution to libwiretap 3
Holding Back libwiretap rather than change wireshark-base
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 3 as a solution to libwiretap-debuginfo 0
Holding Back libwiretap-debuginfo rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 3 as a solution to wireshark-base-debuginfo 10000
Package wireshark-base-debuginfo has broken dep on libwiretap-debuginfo
Considering libwiretap-debuginfo 0 as a solution to wireshark-base-debuginfo 10000
Reinst Failed because of wireshark-base
Reinst Failed because of libwiretap
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-base-debuginfo: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
Depends: libwiretap-debuginfo (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:24:35 :: [aarch64] #100 wireshark-base-debuginfo: install check FAILED
aarch64: wireshark-devel=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-devel
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-devel
Package wireshark-devel has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to wireshark-devel 9999
Re-Instated libwiretap
Re-Instated wireshark-base
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-devel
Package wireshark-devel has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to wireshark-devel 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-devel: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:25:28 :: [aarch64] #100 wireshark-devel: install check FAILED
2019-Jan-13 11:26:20 :: [aarch64] #100 wireshark-doc: install check OK
aarch64: wireshark-qt5=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-qt5
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-qt5
Package wireshark-qt5 has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to wireshark-qt5 9999
Re-Instated libwiretap
Re-Instated wireshark-base
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 1 as a solution to wireshark-base 2
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-qt5
Package wireshark-qt5 has broken dep on wireshark-base
Considering wireshark-base 2 as a solution to wireshark-qt5 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-qt5: Depends: wireshark-base (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:27:37 :: [aarch64] #100 wireshark-qt5: install check FAILED
aarch64: wireshark-qt5-debuginfo=2.6.6-alt1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark wireshark-qt5-debuginfo
MI2a: target wireshark-qt5
MI2a: mark wireshark-qt5
MI2a: target wireshark-base
MI2a: mark wireshark-base
MI2a: target libwiretap
MI2a: mark libwiretap
MI2a: delete libwiretap
MI2a: target wireshark-base-debuginfo
MI2a: mark wireshark-base-debuginfo
MI2a: target libwiretap-debuginfo
MI2a: mark libwiretap-debuginfo
MI2a: target libwiretap
MI2a: mark libwiretap
Starting
Starting 2
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 5 as a solution to wireshark-base 6
Re-Instated libwiretap
Added libwiretap to the remove list
Fixing wireshark-base via keep of libwiretap
Investigating libwiretap-debuginfo
Package libwiretap-debuginfo has broken dep on libwiretap
Considering libwiretap 5 as a solution to libwiretap-debuginfo 2
Holding Back libwiretap-debuginfo rather than change libwiretap
Investigating wireshark-base
Package wireshark-base has broken dep on libwiretap
Considering libwiretap 5 as a solution to wireshark-base 6
Holding Back wireshark-base rather than change libwiretap
Investigating wireshark-base-debuginfo
Package wireshark-base-debuginfo has broken dep on wireshark-base
Considering wireshark-base 6 as a solution to wireshark-base-debuginfo 3
Holding Back wireshark-base-debuginfo rather than change wireshark-base
Investigating wireshark-qt5
Package wireshark-qt5 has broken dep on wireshark-base
Considering wireshark-base 6 as a solution to wireshark-qt5 2
Holding Back wireshark-qt5 rather than change wireshark-base
Investigating wireshark-qt5-debuginfo
Package wireshark-qt5-debuginfo has broken dep on wireshark-qt5
Considering wireshark-qt5 2 as a solution to wireshark-qt5-debuginfo 9999
Reinst Failed because of libwiretap
Reinst Failed because of wireshark-base
Package wireshark-qt5-debuginfo has broken dep on wireshark-base-debuginfo
Considering wireshark-base-debuginfo 3 as a solution to wireshark-qt5-debuginfo 9999
Reinst Failed because of wireshark-base
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
wireshark-qt5-debuginfo: Depends: wireshark-qt5 (= 2.6.6-alt1:sisyphus.219299.100)
Depends: wireshark-base-debuginfo (= 2.6.6-alt1:sisyphus.219299.100)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2019-Jan-13 11:30:54 :: [aarch64] #100 wireshark-qt5-debuginfo: install check FAILED
2019-Jan-13 11:23:48 :: [x86_64] install check FAILED
2019-Jan-13 11:24:03 :: [i586] install check FAILED
2019-Jan-13 11:31:04 :: [aarch64] install check FAILED
2019-Jan-13 11:31:04 :: task #219299 for sisyphus FAILED
reply other threads:[~2019-01-13 11:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190113113105.GA3091@gyle.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=rider@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git