From: Girar Builder pender robot <girar-builder@altlinux.org>
To: Andrey Cherepanov <cas@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org, girar-builder-p8@altlinux.org
Subject: [#216975] p8 DONE (try 2) hplip.git=3.18.10-alt1
Date: Wed, 28 Nov 2018 16:37:28 +0000
Message-ID: <20181128163728.GA6315@gyle.altlinux.org> (raw)
http://git.altlinux.org/tasks/archive/done/_211/216975/logs/events.2.1.log
2018-Nov-28 16:19:53 :: task #216975 for p8 resumed by sotor:
#100 build 3.18.10-alt1 from /gears/h/hplip.git fetched at 2018-Nov-27 17:45:56
2018-Nov-28 16:19:54 :: [i586] #100 hplip.git 3.18.10-alt1: build start
2018-Nov-28 16:19:54 :: [x86_64] #100 hplip.git 3.18.10-alt1: build start
2018-Nov-28 16:21:11 :: [x86_64] hplip.git 3.18.10-alt1: remote: no need to rebuild
2018-Nov-28 16:21:11 :: [x86_64] #100 hplip.git 3.18.10-alt1: build OK
2018-Nov-28 16:21:18 :: [i586] hplip.git 3.18.10-alt1: remote: no need to rebuild
2018-Nov-28 16:21:18 :: [i586] #100 hplip.git 3.18.10-alt1: build OK
2018-Nov-28 16:22:11 :: build check OK
2018-Nov-28 16:22:17 :: noarch check OK
2018-Nov-28 16:22:18 :: plan: src +1 -1 =18138, i586 +10 -10 =35159, noarch +7 -7 =17782, x86_64 +10 -10 =35145
2018-Nov-28 16:22:18 :: version check OK
2018-Nov-28 16:22:19 :: hplip: closes bugs: 35531 35571
2018-Nov-28 16:29:33 :: generated apt indices
2018-Nov-28 16:29:33 :: created next repo
2018-Nov-28 16:29:46 :: dependencies check OK
2018-Nov-28 16:30:19 :: ELF symbols check OK
2018-Nov-28 16:30:36 :: [i586] #100 hplip: no need to repeat, install check SKIPPED
2018-Nov-28 16:30:36 :: [x86_64] #100 hplip: no need to repeat, install check SKIPPED
2018-Nov-28 16:30:50 :: [x86_64] #100 hplip-PPDs: no need to repeat, install check SKIPPED
2018-Nov-28 16:30:50 :: [i586] #100 hplip-PPDs: no need to repeat, install check SKIPPED
2018-Nov-28 16:31:03 :: [x86_64] #100 hplip-common: no need to repeat, install check SKIPPED
2018-Nov-28 16:31:03 :: [i586] #100 hplip-common: no need to repeat, install check SKIPPED
2018-Nov-28 16:31:16 :: [x86_64] #100 hplip-common-debuginfo: no need to repeat, install check SKIPPED
2018-Nov-28 16:31:17 :: [i586] #100 hplip-common-debuginfo: no need to repeat, install check SKIPPED
2018-Nov-28 16:31:30 :: [i586] #100 hplip-debuginfo: no need to repeat, install check SKIPPED
2018-Nov-28 16:31:30 :: [x86_64] #100 hplip-debuginfo: no need to repeat, install check SKIPPED
2018-Nov-28 16:31:44 :: [i586] #100 hplip-gui: no need to repeat, install check SKIPPED
2018-Nov-28 16:31:44 :: [x86_64] #100 hplip-gui: no need to repeat, install check SKIPPED
2018-Nov-28 16:31:58 :: [i586] #100 hplip-gui-autostart: no need to repeat, install check SKIPPED
2018-Nov-28 16:31:58 :: [x86_64] #100 hplip-gui-autostart: no need to repeat, install check SKIPPED
2018-Nov-28 16:32:11 :: [i586] #100 hplip-hpcups: no need to repeat, install check SKIPPED
2018-Nov-28 16:32:11 :: [x86_64] #100 hplip-hpcups: no need to repeat, install check SKIPPED
i586: hplip-hpcups-PPDs=1:3.18.10-alt1 post-install unowned files:
/usr/share/ppd/HP
2018-Nov-28 16:32:24 :: [i586] #100 hplip-hpcups-PPDs: no need to repeat, install check SKIPPED
x86_64: hplip-hpcups-PPDs=1:3.18.10-alt1 post-install unowned files:
/usr/share/ppd/HP
2018-Nov-28 16:32:26 :: [x86_64] #100 hplip-hpcups-PPDs: no need to repeat, install check SKIPPED
2018-Nov-28 16:32:38 :: [i586] #100 hplip-hpcups-debuginfo: no need to repeat, install check SKIPPED
2018-Nov-28 16:32:40 :: [x86_64] #100 hplip-hpcups-debuginfo: no need to repeat, install check SKIPPED
i586: hplip-hpijs=1:3.18.10-alt1 post-install unowned files:
/usr/share/cups
/usr/share/cups/drv
2018-Nov-28 16:32:51 :: [i586] #100 hplip-hpijs: no need to repeat, install check SKIPPED
x86_64: hplip-hpijs=1:3.18.10-alt1 post-install unowned files:
/usr/share/cups
/usr/share/cups/drv
2018-Nov-28 16:32:53 :: [x86_64] #100 hplip-hpijs: no need to repeat, install check SKIPPED
i586: hplip-hpijs-PPDs=1:3.18.10-alt1 post-install unowned files:
/usr/share/ppd
/usr/share/ppd/HP
2018-Nov-28 16:33:05 :: [i586] #100 hplip-hpijs-PPDs: no need to repeat, install check SKIPPED
x86_64: hplip-hpijs-PPDs=1:3.18.10-alt1 post-install unowned files:
/usr/share/ppd
/usr/share/ppd/HP
2018-Nov-28 16:33:07 :: [x86_64] #100 hplip-hpijs-PPDs: no need to repeat, install check SKIPPED
2018-Nov-28 16:33:19 :: [i586] #100 hplip-hpijs-debuginfo: no need to repeat, install check SKIPPED
2018-Nov-28 16:33:20 :: [x86_64] #100 hplip-hpijs-debuginfo: no need to repeat, install check SKIPPED
i586: hplip-ps-PPDs=1:3.18.10-alt1 post-install unowned files:
/usr/share/ppd
/usr/share/ppd/HP
2018-Nov-28 16:33:32 :: [i586] #100 hplip-ps-PPDs: no need to repeat, install check SKIPPED
x86_64: hplip-ps-PPDs=1:3.18.10-alt1 post-install unowned files:
/usr/share/ppd
/usr/share/ppd/HP
2018-Nov-28 16:33:33 :: [x86_64] #100 hplip-ps-PPDs: no need to repeat, install check SKIPPED
2018-Nov-28 16:33:46 :: [i586] #100 hplip-recommends: no need to repeat, install check SKIPPED
2018-Nov-28 16:33:47 :: [x86_64] #100 hplip-recommends: no need to repeat, install check SKIPPED
i586: hplip-sane=1:3.18.10-alt1 post-install unowned files:
/usr/share/hal
/usr/share/hal/fdi
/usr/share/hal/fdi/preprobe
/usr/share/hal/fdi/preprobe/10osvendor
2018-Nov-28 16:33:59 :: [i586] #100 hplip-sane: no need to repeat, install check SKIPPED
x86_64: hplip-sane=1:3.18.10-alt1 post-install unowned files:
/usr/share/hal
/usr/share/hal/fdi
/usr/share/hal/fdi/preprobe
/usr/share/hal/fdi/preprobe/10osvendor
2018-Nov-28 16:34:00 :: [x86_64] #100 hplip-sane: no need to repeat, install check SKIPPED
2018-Nov-28 16:34:12 :: [i586] #100 hplip-sane-debuginfo: no need to repeat, install check SKIPPED
2018-Nov-28 16:34:14 :: [x86_64] #100 hplip-sane-debuginfo: no need to repeat, install check SKIPPED
2018-Nov-28 16:34:15 :: [x86_64-i586] plan: #0 +3 -3 =11940
2018-Nov-28 16:35:07 :: [x86_64-i586] generated apt indices
2018-Nov-28 16:35:07 :: [x86_64-i586] created next repo
2018-Nov-28 16:35:16 :: [x86_64-i586] dependencies check OK
2018-Nov-28 16:35:16 :: gears inheritance check OK
hplip-3.18.10-alt1.src.rpm: missing last changelog entry from hplip-3.18.6-alt1.M80P.1.src.rpm:
* Thu Aug 09 2018 cronport@altlinux 1:3.18.6-alt1
2018-Nov-29 16:35:16 :: srpm inheritance check COND-OK
girar-check-perms: access to hplip DENIED for cas: project `hplip' is not listed in acl file for repository `p8'
girar-check-perms: access to hplip ALLOWED for sotor: superuser
hplip: Update approved by sotor
2018-Nov-28 16:35:16 :: acl check OK
2018-Nov-28 16:35:53 :: created contents_index files
2018-Nov-28 16:36:03 :: created hash files: i586 noarch src x86_64-i586 x86_64
2018-Nov-28 16:36:05 :: task #216975 for p8 TESTED
2018-Nov-28 16:36:05 :: task is ready for commit
2018-Nov-28 16:36:31 :: repo clone OK
2018-Nov-28 16:36:34 :: packages update OK
2018-Nov-28 16:36:45 :: [i586 x86_64 noarch] update OK
2018-Nov-28 16:36:45 :: [x86_64-i586] update OK
2018-Nov-28 16:36:45 :: repo update OK
2018-Nov-28 16:37:23 :: repo save OK
2018-Nov-28 16:37:24 :: created /gears/h/hplip.git branch `p8'
2018-Nov-28 16:37:27 :: gears update OK
2018-Nov-28 16:37:27 :: task #216975 for p8 DONE
reply other threads:[~2018-11-28 16:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181128163728.GA6315@gyle.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=cas@altlinux.org \
--cc=girar-builder-p8@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git