* [#216568] FAILED (try 5) kicad-doc.git=5.0.1-alt1 kicad-i18n.git=5.0.1-alt1 ...
@ 2018-11-26 17:35 Girar Builder awaiter robot
0 siblings, 0 replies; only message in thread
From: Girar Builder awaiter robot @ 2018-11-26 17:35 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger
http://git.altlinux.org/tasks/216568/logs/events.5.1.log
2018-Nov-26 15:32:37 :: test-only task #216568 for sisyphus resumed by antohami:
#100 build 5.0.1-alt1 from /people/antohami/packages/kicad-doc.git fetched at 2018-Nov-18 14:00:13
#200 build 5.0.1-alt1 from /people/antohami/packages/kicad-i18n.git fetched at 2018-Nov-18 14:02:03
#300 build 5.0.1-alt1 from /people/antohami/packages/kicad-symbols.git fetched at 2018-Nov-18 15:05:11
#400 build 5.0.1-alt1 from /people/antohami/packages/kicad-footprints.git fetched at 2018-Nov-18 15:07:30
#500 build 5.0.1-alt1 from /people/antohami/packages/kicad-templates.git fetched at 2018-Nov-18 15:10:09
#600 build 5.0.1-alt1 from /people/antohami/packages/kicad-packages3D.git fetched at 2018-Nov-22 07:07:04
#700 removed
#1000 removed
#1100 build 5.0.1-alt1 from /people/antohami/packages/kicad.git fetched at 2018-Nov-23 09:09:05
2018-Nov-26 15:32:55 :: created build repo
2018-Nov-26 15:32:56 :: [i586] #100 kicad-doc.git 5.0.1-alt1: build start
2018-Nov-26 15:32:56 :: [aarch64] #100 kicad-doc.git 5.0.1-alt1: build start
2018-Nov-26 15:32:56 :: [x86_64] #100 kicad-doc.git 5.0.1-alt1: build start
2018-Nov-26 15:40:20 :: [x86_64] #100 kicad-doc.git 5.0.1-alt1: build OK
2018-Nov-26 15:40:20 :: [x86_64] #200 kicad-i18n.git 5.0.1-alt1: build start
2018-Nov-26 15:40:41 :: [x86_64] kicad-i18n.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:40:41 :: [x86_64] #200 kicad-i18n.git 5.0.1-alt1: build OK
2018-Nov-26 15:40:41 :: [x86_64] #300 kicad-symbols.git 5.0.1-alt1: build start
2018-Nov-26 15:41:02 :: [x86_64] kicad-symbols.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:41:02 :: [x86_64] #300 kicad-symbols.git 5.0.1-alt1: build OK
2018-Nov-26 15:41:02 :: [x86_64] #400 kicad-footprints.git 5.0.1-alt1: build start
2018-Nov-26 15:41:24 :: [x86_64] kicad-footprints.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:41:24 :: [x86_64] #400 kicad-footprints.git 5.0.1-alt1: build OK
2018-Nov-26 15:41:24 :: [x86_64] #500 kicad-templates.git 5.0.1-alt1: build start
2018-Nov-26 15:41:25 :: [i586] #100 kicad-doc.git 5.0.1-alt1: build OK
2018-Nov-26 15:41:25 :: [i586] #200 kicad-i18n.git 5.0.1-alt1: build start
2018-Nov-26 15:41:46 :: [x86_64] kicad-templates.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:41:46 :: [x86_64] #500 kicad-templates.git 5.0.1-alt1: build OK
2018-Nov-26 15:41:46 :: [x86_64] #600 kicad-packages3D.git 5.0.1-alt1: build start
2018-Nov-26 15:41:51 :: [i586] kicad-i18n.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:41:51 :: [i586] #200 kicad-i18n.git 5.0.1-alt1: build OK
2018-Nov-26 15:41:51 :: [i586] #300 kicad-symbols.git 5.0.1-alt1: build start
2018-Nov-26 15:42:12 :: [i586] kicad-symbols.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:42:12 :: [i586] #300 kicad-symbols.git 5.0.1-alt1: build OK
2018-Nov-26 15:42:12 :: [i586] #400 kicad-footprints.git 5.0.1-alt1: build start
2018-Nov-26 15:42:32 :: [i586] kicad-footprints.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:42:32 :: [i586] #400 kicad-footprints.git 5.0.1-alt1: build OK
2018-Nov-26 15:42:32 :: [i586] #500 kicad-templates.git 5.0.1-alt1: build start
2018-Nov-26 15:42:59 :: [x86_64] kicad-packages3D.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:42:59 :: [x86_64] #600 kicad-packages3D.git 5.0.1-alt1: build OK
2018-Nov-26 15:42:59 :: [x86_64] #1100 kicad.git 5.0.1-alt1: build start
2018-Nov-26 15:43:01 :: [i586] kicad-templates.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:43:01 :: [i586] #500 kicad-templates.git 5.0.1-alt1: build OK
2018-Nov-26 15:43:01 :: [i586] #600 kicad-packages3D.git 5.0.1-alt1: build start
2018-Nov-26 15:44:01 :: [i586] kicad-packages3D.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:44:01 :: [i586] #600 kicad-packages3D.git 5.0.1-alt1: build OK
2018-Nov-26 15:44:01 :: [i586] #1100 kicad.git 5.0.1-alt1: build start
2018-Nov-26 15:48:42 :: [aarch64] #100 kicad-doc.git 5.0.1-alt1: build OK
2018-Nov-26 15:48:42 :: [aarch64] #200 kicad-i18n.git 5.0.1-alt1: build start
2018-Nov-26 15:49:36 :: [aarch64] kicad-i18n.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:49:37 :: [aarch64] #200 kicad-i18n.git 5.0.1-alt1: build OK
2018-Nov-26 15:49:37 :: [aarch64] #300 kicad-symbols.git 5.0.1-alt1: build start
2018-Nov-26 15:50:31 :: [aarch64] kicad-symbols.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:50:31 :: [aarch64] #300 kicad-symbols.git 5.0.1-alt1: build OK
2018-Nov-26 15:50:31 :: [aarch64] #400 kicad-footprints.git 5.0.1-alt1: build start
2018-Nov-26 15:51:28 :: [aarch64] kicad-footprints.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:51:28 :: [aarch64] #400 kicad-footprints.git 5.0.1-alt1: build OK
2018-Nov-26 15:51:28 :: [aarch64] #500 kicad-templates.git 5.0.1-alt1: build start
2018-Nov-26 15:52:24 :: [aarch64] kicad-templates.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:52:24 :: [aarch64] #500 kicad-templates.git 5.0.1-alt1: build OK
2018-Nov-26 15:52:24 :: [aarch64] #600 kicad-packages3D.git 5.0.1-alt1: build start
2018-Nov-26 15:54:00 :: [aarch64] kicad-packages3D.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-26 15:54:00 :: [aarch64] #600 kicad-packages3D.git 5.0.1-alt1: build OK
2018-Nov-26 15:54:00 :: [aarch64] #1100 kicad.git 5.0.1-alt1: build start
2018-Nov-26 16:22:35 :: [i586] #1100 kicad.git 5.0.1-alt1: build OK
2018-Nov-26 16:23:17 :: [x86_64] #1100 kicad.git 5.0.1-alt1: build OK
2018-Nov-26 17:22:03 :: [aarch64] #1100 kicad.git 5.0.1-alt1: build OK
2018-Nov-26 17:24:43 :: build check OK
--- kicad-packages3D-5.0.1-alt1.noarch.rpm.x86_64 2018-11-26 17:26:13.785033908 +0000
+++ kicad-packages3D-5.0.1-alt1.noarch.rpm.i586 2018-11-26 17:26:13.793033954 +0000
@@ -1,3 +1,3 @@
-Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1
-Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1
+Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1
+Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1
Requires: rpmlib(PayloadIsLzma)
error (#600): non-identical noarch packages
--- kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.x86_64 2018-11-26 17:26:59.966292797 +0000
+++ kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.i586 2018-11-26 17:27:45.119545921 +0000
@@ -6768,3 +6768,3 @@
Requires: rpmlib(PayloadIsLzma)
-Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1
+Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1
Provides: kicad-packages3D-part1 = 5.0.1-alt1
error (#600): non-identical noarch packages
--- kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.x86_64 2018-11-26 17:27:54.398597938 +0000
+++ kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.i586 2018-11-26 17:28:04.305653475 +0000
@@ -2832,3 +2832,3 @@
Requires: rpmlib(PayloadIsLzma)
-Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1
+Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1
Provides: kicad-packages3D-part2 = 5.0.1-alt1
error (#600): non-identical noarch packages
--- kicad-packages3D-5.0.1-alt1.noarch.rpm.i586 2018-11-26 17:29:56.033632977 +0000
+++ kicad-packages3D-5.0.1-alt1.noarch.rpm.aarch64 2018-11-26 17:29:56.042633031 +0000
@@ -1,3 +1,3 @@
-Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1
-Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1
+Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1
+Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1
Requires: rpmlib(PayloadIsLzma)
error (#600): non-identical noarch packages
--- kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.i586 2018-11-26 17:30:39.798906706 +0000
+++ kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.aarch64 2018-11-26 17:31:23.300178786 +0000
@@ -6768,3 +6768,3 @@
Requires: rpmlib(PayloadIsLzma)
-Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1
+Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1
Provides: kicad-packages3D-part1 = 5.0.1-alt1
error (#600): non-identical noarch packages
--- kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.i586 2018-11-26 17:31:32.255234797 +0000
+++ kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.aarch64 2018-11-26 17:31:41.401292000 +0000
@@ -2832,3 +2832,3 @@
Requires: rpmlib(PayloadIsLzma)
-Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1
+Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1
Provides: kicad-packages3D-part2 = 5.0.1-alt1
error (#600): non-identical noarch packages
2018-Nov-26 17:35:35 :: noarch check FAILED
2018-Nov-26 17:35:35 :: task #216568 for sisyphus FAILED
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-11-26 17:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-26 17:35 [#216568] FAILED (try 5) kicad-doc.git=5.0.1-alt1 kicad-i18n.git=5.0.1-alt1 Girar Builder awaiter robot
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git