From: Girar Builder awaiter robot <girar-builder@altlinux.org>
To: Anton Midyukov <antohami@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org
Subject: [#216568] FAILED (try 4) kicad-doc.git=5.0.1-alt1 kicad-i18n.git=5.0.1-alt1 ...
Date: Sat, 24 Nov 2018 11:01:06 +0000
Message-ID: <20181124110106.GA13112@gyle.altlinux.org> (raw)
http://git.altlinux.org/tasks/216568/logs/events.4.1.log
2018-Nov-24 08:46:50 :: test-only task #216568 for sisyphus resumed by antohami:
#100 build 5.0.1-alt1 from /people/antohami/packages/kicad-doc.git fetched at 2018-Nov-18 14:00:13
#200 build 5.0.1-alt1 from /people/antohami/packages/kicad-i18n.git fetched at 2018-Nov-18 14:02:03
#300 build 5.0.1-alt1 from /people/antohami/packages/kicad-symbols.git fetched at 2018-Nov-18 15:05:11
#400 build 5.0.1-alt1 from /people/antohami/packages/kicad-footprints.git fetched at 2018-Nov-18 15:07:30
#500 build 5.0.1-alt1 from /people/antohami/packages/kicad-templates.git fetched at 2018-Nov-18 15:10:09
#600 build 5.0.1-alt1 from /people/antohami/packages/kicad-packages3D.git fetched at 2018-Nov-22 07:07:04
#700 removed
#1000 removed
#1100 build 5.0.1-alt1 from /people/antohami/packages/kicad.git fetched at 2018-Nov-23 09:09:05
2018-Nov-24 08:50:45 :: created build repo
2018-Nov-24 08:50:47 :: [aarch64] #100 kicad-doc.git 5.0.1-alt1: build start
2018-Nov-24 08:50:47 :: [x86_64] #100 kicad-doc.git 5.0.1-alt1: build start
2018-Nov-24 08:50:47 :: [i586] #100 kicad-doc.git 5.0.1-alt1: build start
2018-Nov-24 08:51:34 :: [i586] kicad-doc.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:51:34 :: [x86_64] kicad-doc.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:51:34 :: [i586] #100 kicad-doc.git 5.0.1-alt1: build OK
2018-Nov-24 08:51:34 :: [i586] #200 kicad-i18n.git 5.0.1-alt1: build start
2018-Nov-24 08:51:34 :: [x86_64] #100 kicad-doc.git 5.0.1-alt1: build OK
2018-Nov-24 08:51:34 :: [x86_64] #200 kicad-i18n.git 5.0.1-alt1: build start
2018-Nov-24 08:51:55 :: [i586] kicad-i18n.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:51:55 :: [i586] #200 kicad-i18n.git 5.0.1-alt1: build OK
2018-Nov-24 08:51:55 :: [i586] #300 kicad-symbols.git 5.0.1-alt1: build start
2018-Nov-24 08:51:55 :: [x86_64] kicad-i18n.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:51:55 :: [x86_64] #200 kicad-i18n.git 5.0.1-alt1: build OK
2018-Nov-24 08:51:55 :: [x86_64] #300 kicad-symbols.git 5.0.1-alt1: build start
2018-Nov-24 08:52:15 :: [i586] kicad-symbols.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:52:15 :: [i586] #300 kicad-symbols.git 5.0.1-alt1: build OK
2018-Nov-24 08:52:15 :: [i586] #400 kicad-footprints.git 5.0.1-alt1: build start
2018-Nov-24 08:52:15 :: [x86_64] kicad-symbols.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:52:15 :: [x86_64] #300 kicad-symbols.git 5.0.1-alt1: build OK
2018-Nov-24 08:52:15 :: [x86_64] #400 kicad-footprints.git 5.0.1-alt1: build start
2018-Nov-24 08:52:19 :: [aarch64] kicad-doc.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:52:19 :: [aarch64] #100 kicad-doc.git 5.0.1-alt1: build OK
2018-Nov-24 08:52:19 :: [aarch64] #200 kicad-i18n.git 5.0.1-alt1: build start
2018-Nov-24 08:52:35 :: [i586] kicad-footprints.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:52:35 :: [i586] #400 kicad-footprints.git 5.0.1-alt1: build OK
2018-Nov-24 08:52:35 :: [i586] #500 kicad-templates.git 5.0.1-alt1: build start
2018-Nov-24 08:52:36 :: [x86_64] kicad-footprints.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:52:37 :: [x86_64] #400 kicad-footprints.git 5.0.1-alt1: build OK
2018-Nov-24 08:52:37 :: [x86_64] #500 kicad-templates.git 5.0.1-alt1: build start
2018-Nov-24 08:52:56 :: [i586] kicad-templates.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:52:56 :: [i586] #500 kicad-templates.git 5.0.1-alt1: build OK
2018-Nov-24 08:52:56 :: [i586] #600 kicad-packages3D.git 5.0.1-alt1: build start
2018-Nov-24 08:52:59 :: [x86_64] kicad-templates.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:52:59 :: [x86_64] #500 kicad-templates.git 5.0.1-alt1: build OK
2018-Nov-24 08:52:59 :: [x86_64] #600 kicad-packages3D.git 5.0.1-alt1: build start
2018-Nov-24 08:53:13 :: [aarch64] kicad-i18n.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:53:13 :: [aarch64] #200 kicad-i18n.git 5.0.1-alt1: build OK
2018-Nov-24 08:53:13 :: [aarch64] #300 kicad-symbols.git 5.0.1-alt1: build start
2018-Nov-24 08:54:08 :: [aarch64] kicad-symbols.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:54:08 :: [aarch64] #300 kicad-symbols.git 5.0.1-alt1: build OK
2018-Nov-24 08:54:08 :: [aarch64] #400 kicad-footprints.git 5.0.1-alt1: build start
2018-Nov-24 08:54:21 :: [x86_64] kicad-packages3D.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:54:21 :: [x86_64] #600 kicad-packages3D.git 5.0.1-alt1: build OK
2018-Nov-24 08:54:21 :: [x86_64] #1100 kicad.git 5.0.1-alt1: build start
2018-Nov-24 08:55:01 :: [aarch64] kicad-footprints.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:55:01 :: [aarch64] #400 kicad-footprints.git 5.0.1-alt1: build OK
2018-Nov-24 08:55:01 :: [aarch64] #500 kicad-templates.git 5.0.1-alt1: build start
2018-Nov-24 08:55:56 :: [aarch64] kicad-templates.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:55:56 :: [aarch64] #500 kicad-templates.git 5.0.1-alt1: build OK
2018-Nov-24 08:55:56 :: [aarch64] #600 kicad-packages3D.git 5.0.1-alt1: build start
2018-Nov-24 08:57:35 :: [aarch64] kicad-packages3D.git 5.0.1-alt1: remote: no need to rebuild
2018-Nov-24 08:57:35 :: [aarch64] #600 kicad-packages3D.git 5.0.1-alt1: build OK
2018-Nov-24 08:57:35 :: [aarch64] #1100 kicad.git 5.0.1-alt1: build start
2018-Nov-24 09:33:07 :: [x86_64] #1100 kicad.git 5.0.1-alt1: build OK
2018-Nov-24 10:10:03 :: [i586] #600 kicad-packages3D.git 5.0.1-alt1: build OK
2018-Nov-24 10:10:03 :: [i586] #1100 kicad.git 5.0.1-alt1: build start
2018-Nov-24 10:20:04 :: [aarch64] #1100 kicad.git 5.0.1-alt1: build OK
2018-Nov-24 10:47:40 :: [i586] #1100 kicad.git 5.0.1-alt1: build OK
2018-Nov-24 10:50:25 :: build check OK
--- kicad-packages3D-5.0.1-alt1.noarch.rpm.x86_64 2018-11-24 10:51:57.225545652 +0000
+++ kicad-packages3D-5.0.1-alt1.noarch.rpm.i586 2018-11-24 10:51:57.234545713 +0000
@@ -1,3 +1,3 @@
-Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1
-Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1
+Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1
+Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1
Requires: rpmlib(PayloadIsLzma)
error (#600): non-identical noarch packages
--- kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.x86_64 2018-11-24 10:52:40.959840009 +0000
+++ kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.i586 2018-11-24 10:53:24.910135819 +0000
@@ -6768,3 +6768,3 @@
Requires: rpmlib(PayloadIsLzma)
-Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1
+Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1
Provides: kicad-packages3D-part1 = 5.0.1-alt1
error (#600): non-identical noarch packages
--- kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.x86_64 2018-11-24 10:53:34.386199597 +0000
+++ kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.i586 2018-11-24 10:53:43.435260502 +0000
@@ -2832,3 +2832,3 @@
Requires: rpmlib(PayloadIsLzma)
-Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1
+Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1
Provides: kicad-packages3D-part2 = 5.0.1-alt1
error (#600): non-identical noarch packages
--- kicad-packages3D-5.0.1-alt1.noarch.rpm.i586 2018-11-24 10:55:29.307973086 +0000
+++ kicad-packages3D-5.0.1-alt1.noarch.rpm.aarch64 2018-11-24 10:55:29.315973139 +0000
@@ -1,3 +1,3 @@
-Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1
-Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1
+Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1
+Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1
Requires: rpmlib(PayloadIsLzma)
error (#600): non-identical noarch packages
--- kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.i586 2018-11-24 10:56:12.430263322 +0000
+++ kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.aarch64 2018-11-24 10:56:55.606553923 +0000
@@ -6768,3 +6768,3 @@
Requires: rpmlib(PayloadIsLzma)
-Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1
+Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1
Provides: kicad-packages3D-part1 = 5.0.1-alt1
error (#600): non-identical noarch packages
--- kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.i586 2018-11-24 10:57:04.585614356 +0000
+++ kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.aarch64 2018-11-24 10:57:13.682675585 +0000
@@ -2832,3 +2832,3 @@
Requires: rpmlib(PayloadIsLzma)
-Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1
+Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1
Provides: kicad-packages3D-part2 = 5.0.1-alt1
error (#600): non-identical noarch packages
2018-Nov-24 11:01:05 :: noarch check FAILED
2018-Nov-24 11:01:05 :: task #216568 for sisyphus FAILED
reply other threads:[~2018-11-24 11:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181124110106.GA13112@gyle.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=antohami@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git