From: Girar Builder pender robot <girar-builder@altlinux.org>
To: Paul Wolneykien <manowar@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org, girar-builder-p8@altlinux.org
Subject: [#214131] p8 DONE (try 6) libgcrypt.git=v1.8.3-alt3 libksba.git=v1.3.6-alt5 ...
Date: Wed, 21 Nov 2018 17:09:53 +0000
Message-ID: <20181121170953.GA7678@gyle.altlinux.org> (raw)
http://git.altlinux.org/tasks/archive/done/_209/214131/logs/events.6.1.log
2018-Nov-21 16:45:08 :: task #214131 for p8 resumed by sotor:
#100 build v1.8.3-alt3 from /people/manowar/packages/libgcrypt.git fetched at 2018-Oct-05 10:52:08
#200 build v1.3.6-alt5 from /people/manowar/packages/libksba.git fetched at 2018-Oct-05 10:52:23
#300 build v1.25.1-alt3 from /people/manowar/packages/libpkcs11-helper.git fetched at 2018-Oct-05 10:52:42
#400 removed
#440 build v0.9.2-alt4.M80P.1 from /people/manowar/packages/gnupg-pkcs11-scd.git fetched at 2018-Oct-09 12:42:02
#500 removed
#600 build v2.2.10-alt3 from /people/manowar/packages/gnupg2.git fetched at 2018-Oct-31 15:48:31
2018-Nov-21 16:45:08 :: waiting for a shared lock on p8
2018-Nov-21 16:46:02 :: acquired a shared lock on p8
2018-Nov-21 16:46:25 :: created build repo
2018-Nov-21 16:46:26 :: [x86_64] #100 libgcrypt.git v1.8.3-alt3: build start
2018-Nov-21 16:46:26 :: [i586] #100 libgcrypt.git v1.8.3-alt3: build start
2018-Nov-21 16:50:25 :: [x86_64] #100 libgcrypt.git v1.8.3-alt3: build OK
2018-Nov-21 16:50:25 :: [x86_64] #200 libksba.git v1.3.6-alt5: build start
2018-Nov-21 16:51:32 :: [x86_64] #200 libksba.git v1.3.6-alt5: build OK
2018-Nov-21 16:51:32 :: [x86_64] #300 libpkcs11-helper.git v1.25.1-alt3: build start
2018-Nov-21 16:52:11 :: [i586] #100 libgcrypt.git v1.8.3-alt3: build OK
2018-Nov-21 16:52:11 :: [i586] #200 libksba.git v1.3.6-alt5: build start
2018-Nov-21 16:52:48 :: [x86_64] #300 libpkcs11-helper.git v1.25.1-alt3: build OK
2018-Nov-21 16:52:48 :: [x86_64] #440 gnupg-pkcs11-scd.git v0.9.2-alt4.M80P.1: build start
2018-Nov-21 16:53:19 :: [i586] #200 libksba.git v1.3.6-alt5: build OK
2018-Nov-21 16:53:19 :: [i586] #300 libpkcs11-helper.git v1.25.1-alt3: build start
2018-Nov-21 16:53:35 :: [x86_64] #440 gnupg-pkcs11-scd.git v0.9.2-alt4.M80P.1: build OK
2018-Nov-21 16:53:35 :: [x86_64] #600 gnupg2.git v2.2.10-alt3: build start
2018-Nov-21 16:54:36 :: [i586] #300 libpkcs11-helper.git v1.25.1-alt3: build OK
2018-Nov-21 16:54:36 :: [i586] #440 gnupg-pkcs11-scd.git v0.9.2-alt4.M80P.1: build start
2018-Nov-21 16:55:23 :: [i586] #440 gnupg-pkcs11-scd.git v0.9.2-alt4.M80P.1: build OK
2018-Nov-21 16:55:23 :: [i586] #600 gnupg2.git v2.2.10-alt3: build start
2018-Nov-21 16:57:26 :: [x86_64] #600 gnupg2.git v2.2.10-alt3: build OK
2018-Nov-21 16:59:45 :: [i586] #600 gnupg2.git v2.2.10-alt3: build OK
2018-Nov-21 17:00:21 :: build check OK
2018-Nov-21 17:00:25 :: noarch check OK
2018-Nov-21 17:00:26 :: plan: src +5 -5 =18137, i586 +16 -16 =35155, x86_64 +16 -16 =35141
2018-Nov-21 17:00:26 :: version check OK
2018-Nov-21 17:00:27 :: gnupg2: closes bugs: 34602
2018-Nov-21 17:00:27 :: libgcrypt: closes bugs: 34383
2018-Nov-21 17:00:27 :: gnupg2: mentions vulnerabilities: CVE-2018-12020
2018-Nov-21 17:00:27 :: libgcrypt: mentions vulnerabilities: CVE-2018-0495 CVE-2017-0379 CVE-2017-7526
2018-Nov-21 17:01:13 :: generated apt indices
2018-Nov-21 17:01:13 :: created next repo
2018-Nov-21 17:01:26 :: dependencies check OK
2018-Nov-21 17:01:57 :: ELF symbols check OK
2018-Nov-21 17:02:18 :: [i586] #100 gcrypt-utils: install check OK
2018-Nov-21 17:02:19 :: [x86_64] #100 gcrypt-utils: install check OK
2018-Nov-21 17:02:38 :: [i586] #100 gcrypt-utils-debuginfo: install check OK
2018-Nov-21 17:02:43 :: [x86_64] #100 gcrypt-utils-debuginfo: install check OK
i586: gnupg-pkcs11-scd=0.9.2-alt4.M80P.1 post-install unowned files:
/usr/share/doc/gnupg-pkcs11-scd
2018-Nov-21 17:03:03 :: [i586] #440 gnupg-pkcs11-scd: install check OK
x86_64: gnupg-pkcs11-scd=0.9.2-alt4.M80P.1 post-install unowned files:
/usr/share/doc/gnupg-pkcs11-scd
2018-Nov-21 17:03:11 :: [x86_64] #440 gnupg-pkcs11-scd: install check OK
2018-Nov-21 17:03:32 :: [i586] #440 gnupg-pkcs11-scd-debuginfo: install check OK
2018-Nov-21 17:03:39 :: [x86_64] #440 gnupg-pkcs11-scd-debuginfo: install check OK
i586: gnupg2=2.2.10-alt3 post-install unowned files:
/usr/lib/systemd
/usr/lib/systemd/user
2018-Nov-21 17:04:03 :: [i586] #600 gnupg2: install check OK
x86_64: gnupg2=2.2.10-alt3 post-install unowned files:
/usr/lib/systemd
/usr/lib/systemd/user
2018-Nov-21 17:04:03 :: [x86_64] #600 gnupg2: install check OK
2018-Nov-21 17:04:31 :: [i586] #600 gnupg2-debuginfo: install check OK
2018-Nov-21 17:04:32 :: [x86_64] #600 gnupg2-debuginfo: install check OK
2018-Nov-21 17:04:49 :: [i586] #100 libgcrypt-devel: install check OK
2018-Nov-21 17:04:50 :: [x86_64] #100 libgcrypt-devel: install check OK
2018-Nov-21 17:05:11 :: [i586] #100 libgcrypt-devel-static: install check OK
2018-Nov-21 17:05:12 :: [x86_64] #100 libgcrypt-devel-static: install check OK
2018-Nov-21 17:05:29 :: [i586] #100 libgcrypt20: install check OK
2018-Nov-21 17:05:30 :: [x86_64] #100 libgcrypt20: install check OK
2018-Nov-21 17:05:48 :: [i586] #100 libgcrypt20-debuginfo: install check OK
2018-Nov-21 17:05:49 :: [x86_64] #100 libgcrypt20-debuginfo: install check OK
2018-Nov-21 17:06:05 :: [i586] #200 libksba: install check OK
2018-Nov-21 17:06:06 :: [x86_64] #200 libksba: install check OK
2018-Nov-21 17:06:23 :: [i586] #200 libksba-debuginfo: install check OK
2018-Nov-21 17:06:25 :: [x86_64] #200 libksba-debuginfo: install check OK
2018-Nov-21 17:06:41 :: [i586] #200 libksba-devel: install check OK
2018-Nov-21 17:06:42 :: [x86_64] #200 libksba-devel: install check OK
2018-Nov-21 17:06:59 :: [i586] #300 libpkcs11-helper: install check OK
2018-Nov-21 17:06:59 :: [x86_64] #300 libpkcs11-helper: install check OK
2018-Nov-21 17:07:18 :: [i586] #300 libpkcs11-helper-debuginfo: install check OK
2018-Nov-21 17:07:18 :: [x86_64] #300 libpkcs11-helper-debuginfo: install check OK
2018-Nov-21 17:07:36 :: [i586] #300 libpkcs11-helper-devel: install check OK
2018-Nov-21 17:07:36 :: [x86_64] #300 libpkcs11-helper-devel: install check OK
2018-Nov-21 17:07:37 :: [x86_64-i586] plan: #7 +7 -7 =11940
2018-Nov-21 17:08:09 :: [x86_64-i586] arepo build OK
2018-Nov-21 17:08:28 :: [x86_64-i586] generated apt indices
2018-Nov-21 17:08:28 :: [x86_64-i586] created next repo
2018-Nov-21 17:08:37 :: [x86_64-i586] dependencies check OK
2018-Nov-21 17:08:40 :: gears inheritance check OK
2018-Nov-21 17:08:40 :: srpm inheritance check OK
girar-check-perms: access to libgcrypt DENIED for manowar: project `libgcrypt' is not listed in acl file for repository `p8'
girar-check-perms: access to libgcrypt ALLOWED for sotor: superuser
libgcrypt: Update approved by sotor
girar-check-perms: access to libksba DENIED for manowar: project `libksba' is not listed in acl file for repository `p8'
girar-check-perms: access to libksba ALLOWED for sotor: superuser
libksba: Update approved by sotor
girar-check-perms: access to libpkcs11-helper DENIED for manowar: project `libpkcs11-helper' is not listed in acl file for repository `p8'
girar-check-perms: access to libpkcs11-helper ALLOWED for sotor: superuser
libpkcs11-helper: Update approved by sotor
girar-check-perms: access to gnupg-pkcs11-scd DENIED for manowar: project `gnupg-pkcs11-scd' is not listed in acl file for repository `p8'
girar-check-perms: access to gnupg-pkcs11-scd ALLOWED for sotor: superuser
gnupg-pkcs11-scd: Update approved by sotor
girar-check-perms: access to gnupg2 DENIED for manowar: project `gnupg2' is not listed in acl file for repository `p8'
girar-check-perms: access to gnupg2 ALLOWED for sotor: superuser
gnupg2: Update approved by sotor
2018-Nov-21 17:08:40 :: acl check OK
2018-Nov-21 17:08:54 :: created contents_index files
2018-Nov-21 17:09:02 :: created hash files: i586 src x86_64-i586 x86_64
2018-Nov-21 17:09:03 :: task #214131 for p8 TESTED
2018-Nov-21 17:09:04 :: task is ready for commit
2018-Nov-21 17:09:09 :: repo clone OK
2018-Nov-21 17:09:12 :: packages update OK
2018-Nov-21 17:09:14 :: [i586 x86_64] update OK
2018-Nov-21 17:09:15 :: [x86_64-i586] update OK
2018-Nov-21 17:09:15 :: repo update OK
2018-Nov-21 17:09:25 :: repo save OK
2018-Nov-21 17:09:27 :: updated /gears/g/gnupg-pkcs11-scd.git branch `p8'
2018-Nov-21 17:09:34 :: updated /gears/g/gnupg2.git branch `p8'
2018-Nov-21 17:09:36 :: updated /gears/l/libgcrypt.git branch `p8'
2018-Nov-21 17:09:36 :: updated /gears/l/libksba.git branch `p8'
2018-Nov-21 17:09:37 :: updated /gears/l/libpkcs11-helper.git branch `p8'
2018-Nov-21 17:09:52 :: gears update OK
2018-Nov-21 17:09:52 :: task #214131 for p8 DONE
reply other threads:[~2018-11-21 17:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181121170953.GA7678@gyle.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=girar-builder-p8@altlinux.org \
--cc=manowar@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git