From: Girar Builder awaiter robot <girar-builder@altlinux.org>
To: Aleksei Nikiforov <darktemplar@altlinux.org>
Cc: python@packages.altlinux.org,
Sergey Bolshakov <sbolshakov@altlinux.org>,
Andrey Cherepanov <cas@altlinux.org>,
Igor Vlasenko <viy@altlinux.org>,
sisyphus-incominger@lists.altlinux.org,
Valery Pipin <vvpi@altlinux.org>
Subject: [#213453] TESTED (try 2) del=VTKLargeData del=vtk6.2 del=vtk-data6.2 ...
Date: Tue, 25 Sep 2018 00:06:36 +0000
Message-ID: <20180925000636.GA5509@gyle.altlinux.org> (raw)
http://git.altlinux.org/tasks/213453/logs/events.2.1.log
2018-Sep-24 14:05:31 :: test-only task #213453 for sisyphus resumed by darktemplar:
#100 delete VTKLargeData
#200 delete vtk6.2
#300 delete vtk-data6.2
#400 build libharu-2.3.0-alt2_3.src.rpm
#500 build 1.4.0-alt1 from /people/darktemplar/packages/gl2ps.git fetched at 2018-Sep-21 09:46:09
#600 build vtk-data8.1-8.1.1-alt1.src.rpm
#700 build 8.1.1-alt1 from /people/darktemplar/packages/vtk8.1.git fetched at 2018-Sep-21 09:49:20
#1000 build 3.3.1-alt2 from /people/darktemplar/packages/libmed.git fetched at 2018-Sep-24 13:49:31
#1100 build 0.17-alt5 from /people/darktemplar/packages/freecad.git fetched at 2018-Sep-24 13:52:54
#1200 build 6.0.0-alt1 from /people/darktemplar/packages/python-module-traitsui.git fetched at 2018-Sep-24 13:54:45
#1300 build 4.6.0-alt2 from /people/darktemplar/packages/python-module-traits.git fetched at 2018-Sep-24 13:54:53
#1400 build 6.0.0-alt1 from /people/darktemplar/packages/python-module-pyface.git fetched at 2018-Sep-24 13:55:07
#1500 build 4.6.2-alt1 from /people/darktemplar/packages/Mayavi.git fetched at 2018-Sep-24 14:05:00
2018-Sep-24 14:05:47 :: created build repo
2018-Sep-24 14:05:49 :: [x86_64] #400 libharu-2.3.0-alt2_3.src.rpm: build start
2018-Sep-24 14:05:49 :: [aarch64] #400 libharu-2.3.0-alt2_3.src.rpm: build start
2018-Sep-24 14:05:49 :: [i586] #400 libharu-2.3.0-alt2_3.src.rpm: build start
2018-Sep-24 14:06:53 :: [x86_64] #400 libharu-2.3.0-alt2_3.src.rpm: build OK
2018-Sep-24 14:06:53 :: [x86_64] #500 gl2ps.git 1.4.0-alt1: build start
2018-Sep-24 14:06:54 :: [i586] #400 libharu-2.3.0-alt2_3.src.rpm: build OK
2018-Sep-24 14:06:54 :: [i586] #500 gl2ps.git 1.4.0-alt1: build start
2018-Sep-24 14:08:17 :: [aarch64] #400 libharu-2.3.0-alt2_3.src.rpm: build OK
2018-Sep-24 14:08:17 :: [aarch64] #500 gl2ps.git 1.4.0-alt1: build start
2018-Sep-24 14:10:45 :: [x86_64] #500 gl2ps.git 1.4.0-alt1: build OK
2018-Sep-24 14:10:45 :: [x86_64] #600 vtk-data8.1-8.1.1-alt1.src.rpm: build start
2018-Sep-24 14:11:00 :: [i586] #500 gl2ps.git 1.4.0-alt1: build OK
2018-Sep-24 14:11:00 :: [i586] #600 vtk-data8.1-8.1.1-alt1.src.rpm: build start
2018-Sep-24 14:15:38 :: [aarch64] #500 gl2ps.git 1.4.0-alt1: build OK
2018-Sep-24 14:15:38 :: [aarch64] #600 vtk-data8.1-8.1.1-alt1.src.rpm: build start
2018-Sep-24 14:20:25 :: [x86_64] #600 vtk-data8.1-8.1.1-alt1.src.rpm: build OK
2018-Sep-24 14:20:25 :: [x86_64] #700 vtk8.1.git 8.1.1-alt1: build start
2018-Sep-24 14:21:02 :: [i586] #600 vtk-data8.1-8.1.1-alt1.src.rpm: build OK
2018-Sep-24 14:21:02 :: [i586] #700 vtk8.1.git 8.1.1-alt1: build start
2018-Sep-24 14:37:35 :: [aarch64] #600 vtk-data8.1-8.1.1-alt1.src.rpm: build OK
2018-Sep-24 14:37:35 :: [aarch64] #700 vtk8.1.git 8.1.1-alt1: build start
2018-Sep-24 15:59:27 :: [x86_64] #700 vtk8.1.git 8.1.1-alt1: build OK
2018-Sep-24 15:59:27 :: [x86_64] #1000 libmed.git 3.3.1-alt2: build start
2018-Sep-24 16:02:20 :: [i586] #700 vtk8.1.git 8.1.1-alt1: build OK
2018-Sep-24 16:02:20 :: [i586] #1000 libmed.git 3.3.1-alt2: build start
2018-Sep-24 16:06:13 :: [x86_64] #1000 libmed.git 3.3.1-alt2: build OK
2018-Sep-24 16:06:13 :: [x86_64] #1100 freecad.git 0.17-alt5: build start
2018-Sep-24 16:09:21 :: [i586] #1000 libmed.git 3.3.1-alt2: build OK
2018-Sep-24 16:09:21 :: [i586] #1100 freecad.git 0.17-alt5: build start
2018-Sep-24 17:00:39 :: [x86_64] #1100 freecad.git 0.17-alt5: build OK
2018-Sep-24 17:00:39 :: [x86_64] #1200 python-module-traitsui.git 6.0.0-alt1: build start
2018-Sep-24 17:01:59 :: [x86_64] #1200 python-module-traitsui.git 6.0.0-alt1: build OK
2018-Sep-24 17:01:59 :: [x86_64] #1300 python-module-traits.git 4.6.0-alt2: build start
2018-Sep-24 17:04:32 :: [x86_64] #1300 python-module-traits.git 4.6.0-alt2: build OK
2018-Sep-24 17:04:32 :: [x86_64] #1400 python-module-pyface.git 6.0.0-alt1: build start
2018-Sep-24 17:06:19 :: [x86_64] #1400 python-module-pyface.git 6.0.0-alt1: build OK
2018-Sep-24 17:06:19 :: [x86_64] #1500 Mayavi.git 4.6.2-alt1: build start
2018-Sep-24 17:09:29 :: [x86_64] #1500 Mayavi.git 4.6.2-alt1: build OK
2018-Sep-24 17:12:29 :: [i586] #1100 freecad.git 0.17-alt5: build OK
2018-Sep-24 17:12:29 :: [i586] #1200 python-module-traitsui.git 6.0.0-alt1: build start
2018-Sep-24 17:14:06 :: [i586] #1200 python-module-traitsui.git 6.0.0-alt1: build OK
2018-Sep-24 17:14:06 :: [i586] #1300 python-module-traits.git 4.6.0-alt2: build start
2018-Sep-24 17:16:57 :: [i586] #1300 python-module-traits.git 4.6.0-alt2: build OK
2018-Sep-24 17:16:57 :: [i586] #1400 python-module-pyface.git 6.0.0-alt1: build start
2018-Sep-24 17:19:28 :: [i586] #1400 python-module-pyface.git 6.0.0-alt1: build OK
2018-Sep-24 17:19:28 :: [i586] #1500 Mayavi.git 4.6.2-alt1: build start
2018-Sep-24 17:23:04 :: [i586] #1500 Mayavi.git 4.6.2-alt1: build OK
2018-Sep-24 18:56:12 :: [aarch64] #700 vtk8.1.git 8.1.1-alt1: build OK
2018-Sep-24 18:56:12 :: [aarch64] #1000 libmed.git 3.3.1-alt2: build start
2018-Sep-24 19:07:30 :: [aarch64] #1000 libmed.git 3.3.1-alt2: build OK
2018-Sep-24 19:07:30 :: [aarch64] #1100 freecad.git 0.17-alt5: build start
2018-Sep-24 21:37:50 :: [aarch64] #1100 freecad.git 0.17-alt5: build OK
2018-Sep-24 21:37:50 :: [aarch64] #1200 python-module-traitsui.git 6.0.0-alt1: build start
2018-Sep-24 21:41:09 :: [aarch64] #1200 python-module-traitsui.git 6.0.0-alt1: build OK
2018-Sep-24 21:41:09 :: [aarch64] #1300 python-module-traits.git 4.6.0-alt2: build start
2018-Sep-24 21:47:17 :: [aarch64] #1300 python-module-traits.git 4.6.0-alt2: build OK
2018-Sep-24 21:47:18 :: [aarch64] #1400 python-module-pyface.git 6.0.0-alt1: build start
2018-Sep-24 21:51:50 :: [aarch64] #1400 python-module-pyface.git 6.0.0-alt1: build OK
2018-Sep-24 21:51:50 :: [aarch64] #1500 Mayavi.git 4.6.2-alt1: build start
2018-Sep-24 21:58:44 :: [aarch64] #1500 Mayavi.git 4.6.2-alt1: build OK
2018-Sep-24 22:02:57 :: build check OK
2018-Sep-24 22:16:03 :: noarch check OK
2018-Sep-24 22:16:05 :: plan: src +10 -11 =18656, aarch64 +48 -30 =29465, i586 +48 -44 =33940, noarch +12 -14 =19067, x86_64 +48 -44 =34009
2018-Sep-24 22:16:05 :: version check OK
2018-Sep-24 22:17:36 :: generated apt indices
2018-Sep-24 22:17:36 :: created next repo
aarch64: old unmet dependencies resolved:
python-module-Enable#4.6.1-alt1 python2.7(tvtk)
python-module-modepy-pickles#2013.3-alt1.git20140704.1.2 python2.7(mayavi)
2018-Sep-24 22:17:56 :: dependencies check OK
2018-Sep-24 22:18:47 :: ELF symbols check OK
2018-Sep-24 22:20:17 :: [x86_64] #1500 Mayavi: install check OK
2018-Sep-24 22:20:23 :: [i586] #1500 Mayavi: install check OK
2018-Sep-24 22:20:36 :: [x86_64] #1500 Mayavi-doc: install check OK
2018-Sep-24 22:20:41 :: [i586] #1500 Mayavi-doc: install check OK
x86_64: freecad=1:0.17-alt5 post-install unowned files:
/usr/share/icons/hicolor/scalable
/usr/share/icons/hicolor/scalable/apps
2018-Sep-24 22:21:20 :: [x86_64] #1100 freecad: install check OK
i586: freecad=1:0.17-alt5 post-install unowned files:
/usr/share/icons/hicolor/scalable
/usr/share/icons/hicolor/scalable/apps
2018-Sep-24 22:21:28 :: [aarch64] #1500 Mayavi: install check OK
2018-Sep-24 22:21:28 :: [i586] #1100 freecad: install check OK
2018-Sep-24 22:22:21 :: [aarch64] #1500 Mayavi-doc: install check OK
aarch64: freecad=1:0.17-alt5 post-install unowned files:
/usr/share/icons/hicolor/scalable
/usr/share/icons/hicolor/scalable/apps
2018-Sep-24 22:23:53 :: [aarch64] #1100 freecad: install check OK
2018-Sep-24 22:24:09 :: [x86_64] #1100 freecad-debuginfo: install check OK
2018-Sep-24 22:24:36 :: [i586] #1100 freecad-debuginfo: install check OK
x86_64: freecad-docs=1:0.17-alt5 post-install unowned files:
/usr/lib64/freecad
2018-Sep-24 22:24:49 :: [x86_64] #1100 freecad-docs: install check OK
2018-Sep-24 22:25:06 :: [x86_64] #500 libgl2ps: install check OK
i586: freecad-docs=1:0.17-alt5 post-install unowned files:
/usr/lib/freecad
2018-Sep-24 22:25:17 :: [i586] #1100 freecad-docs: install check OK
2018-Sep-24 22:25:34 :: [i586] #500 libgl2ps: install check OK
2018-Sep-24 22:25:38 :: [x86_64] #500 libgl2ps-debuginfo: install check OK
2018-Sep-24 22:25:58 :: [x86_64] #500 libgl2ps-devel: install check OK
2018-Sep-24 22:26:07 :: [i586] #500 libgl2ps-debuginfo: install check OK
2018-Sep-24 22:26:15 :: [x86_64] #500 libgl2ps-devel-doc: install check OK
2018-Sep-24 22:26:28 :: [i586] #500 libgl2ps-devel: install check OK
2018-Sep-24 22:26:32 :: [x86_64] #400 libharu: install check OK
2018-Sep-24 22:26:45 :: [i586] #500 libgl2ps-devel-doc: install check OK
2018-Sep-24 22:26:50 :: [x86_64] #400 libharu-debuginfo: install check OK
2018-Sep-24 22:27:03 :: [i586] #400 libharu: install check OK
2018-Sep-24 22:27:07 :: [x86_64] #400 libharu-devel: install check OK
2018-Sep-24 22:27:21 :: [i586] #400 libharu-debuginfo: install check OK
2018-Sep-24 22:27:25 :: [x86_64] #1000 libmed: install check OK
2018-Sep-24 22:27:38 :: [i586] #400 libharu-devel: install check OK
2018-Sep-24 22:27:47 :: [x86_64] #1000 libmed-debuginfo: install check OK
2018-Sep-24 22:27:56 :: [i586] #1000 libmed: install check OK
2018-Sep-24 22:28:10 :: [x86_64] #1000 libmed-devel: install check OK
2018-Sep-24 22:28:17 :: [i586] #1000 libmed-debuginfo: install check OK
2018-Sep-24 22:28:23 :: [aarch64] #1100 freecad-debuginfo: install check OK
2018-Sep-24 22:28:30 :: [x86_64] #1000 libmed-tools: install check OK
2018-Sep-24 22:28:40 :: [i586] #1000 libmed-devel: install check OK
2018-Sep-24 22:28:54 :: [x86_64] #1000 libmed-tools-debuginfo: install check OK
2018-Sep-24 22:29:00 :: [i586] #1000 libmed-tools: install check OK
2018-Sep-24 22:29:21 :: [x86_64] #700 libvtk8.1: install check OK
2018-Sep-24 22:29:24 :: [i586] #1000 libmed-tools-debuginfo: install check OK
aarch64: freecad-docs=1:0.17-alt5 post-install unowned files:
/usr/lib64/freecad
2018-Sep-24 22:29:45 :: [aarch64] #1100 freecad-docs: install check OK
2018-Sep-24 22:29:53 :: [i586] #700 libvtk8.1: install check OK
2018-Sep-24 22:30:35 :: [aarch64] #500 libgl2ps: install check OK
2018-Sep-24 22:30:42 :: [x86_64] #700 libvtk8.1-debuginfo: install check OK
2018-Sep-24 22:31:21 :: [i586] #700 libvtk8.1-debuginfo: install check OK
2018-Sep-24 22:31:27 :: [aarch64] #500 libgl2ps-debuginfo: install check OK
2018-Sep-24 22:31:32 :: [x86_64] #700 libvtk8.1-devel: install check OK
2018-Sep-24 22:32:02 :: [x86_64] #700 libvtk8.1-python: install check OK
2018-Sep-24 22:32:15 :: [i586] #700 libvtk8.1-devel: install check OK
2018-Sep-24 22:32:22 :: [aarch64] #500 libgl2ps-devel: install check OK
2018-Sep-24 22:32:46 :: [i586] #700 libvtk8.1-python: install check OK
2018-Sep-24 22:33:10 :: [aarch64] #500 libgl2ps-devel-doc: install check OK
2018-Sep-24 22:33:32 :: [x86_64] #700 libvtk8.1-python-debuginfo: install check OK
2018-Sep-24 22:33:59 :: [aarch64] #400 libharu: install check OK
x86_64: libvtk8.1-python-devel=8.1.1-alt1 post-install unowned files:
/usr/include/vtk-8.1
/usr/lib64/cmake
/usr/lib64/cmake/vtk-8.1
2018-Sep-24 22:34:01 :: [x86_64] #700 libvtk8.1-python-devel: install check OK
2018-Sep-24 22:34:24 :: [i586] #700 libvtk8.1-python-debuginfo: install check OK
2018-Sep-24 22:34:29 :: [x86_64] #700 libvtk8.1-tcl: install check OK
2018-Sep-24 22:34:53 :: [aarch64] #400 libharu-debuginfo: install check OK
i586: libvtk8.1-python-devel=8.1.1-alt1 post-install unowned files:
/usr/include/vtk-8.1
/usr/lib/cmake
/usr/lib/cmake/vtk-8.1
2018-Sep-24 22:34:55 :: [i586] #700 libvtk8.1-python-devel: install check OK
2018-Sep-24 22:35:25 :: [i586] #700 libvtk8.1-tcl: install check OK
2018-Sep-24 22:35:46 :: [aarch64] #400 libharu-devel: install check OK
2018-Sep-24 22:35:56 :: [x86_64] #700 libvtk8.1-tcl-debuginfo: install check OK
2018-Sep-24 22:36:40 :: [aarch64] #1000 libmed: install check OK
2018-Sep-24 22:36:45 :: [x86_64] #700 libvtk8.1-tcl-devel: install check OK
2018-Sep-24 22:36:58 :: [i586] #700 libvtk8.1-tcl-debuginfo: install check OK
2018-Sep-24 22:37:38 :: [aarch64] #1000 libmed-debuginfo: install check OK
2018-Sep-24 22:37:47 :: [x86_64] #1500 python-module-mayavi: install check OK
2018-Sep-24 22:37:51 :: [i586] #700 libvtk8.1-tcl-devel: install check OK
2018-Sep-24 22:38:39 :: [aarch64] #1000 libmed-devel: install check OK
2018-Sep-24 22:38:49 :: [x86_64] #1500 python-module-mayavi.tests: install check OK
2018-Sep-24 22:39:00 :: [i586] #1500 python-module-mayavi: install check OK
2018-Sep-24 22:39:36 :: [aarch64] #1000 libmed-tools: install check OK
warning [x86_64]: python-module-pyface=6.0.0-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-traits=4.6.0-alt2 python-module-traitsui=6.0.0-alt1 python-module-tvtk=4.6.2-alt1
x86_64: python-module-pyface=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-24 22:39:52 :: [x86_64] #1400 python-module-pyface: install check OK
2018-Sep-24 22:40:09 :: [i586] #1500 python-module-mayavi.tests: install check OK
2018-Sep-24 22:40:11 :: [x86_64] #1400 python-module-pyface-docs: install check OK
x86_64: python-module-pyface-pickles=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/pyface
2018-Sep-24 22:40:29 :: [x86_64] #1400 python-module-pyface-pickles: install check OK
2018-Sep-24 22:40:36 :: [aarch64] #1000 libmed-tools-debuginfo: install check OK
warning [i586]: python-module-pyface=6.0.0-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-traits=4.6.0-alt2 python-module-traitsui=6.0.0-alt1 python-module-tvtk=4.6.2-alt1
i586: python-module-pyface=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-24 22:41:19 :: [i586] #1400 python-module-pyface: install check OK
2018-Sep-24 22:41:29 :: [x86_64] #1400 python-module-pyface-tests: install check OK
2018-Sep-24 22:41:37 :: [i586] #1400 python-module-pyface-docs: install check OK
2018-Sep-24 22:41:40 :: [aarch64] #700 libvtk8.1: install check OK
i586: python-module-pyface-pickles=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/pyface
2018-Sep-24 22:41:54 :: [i586] #1400 python-module-pyface-pickles: install check OK
warning [x86_64]: python-module-traits=4.6.0-alt2: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traitsui=6.0.0-alt1 python-module-tvtk=4.6.2-alt1
x86_64: python-module-traits=4.6.0-alt2 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-24 22:42:32 :: [x86_64] #1300 python-module-traits: install check OK
2018-Sep-24 22:43:01 :: [i586] #1400 python-module-pyface-tests: install check OK
2018-Sep-24 22:43:35 :: [x86_64] #1300 python-module-traits-debuginfo: install check OK
2018-Sep-24 22:43:53 :: [x86_64] #1300 python-module-traits-doc: install check OK
2018-Sep-24 22:44:03 :: [aarch64] #700 libvtk8.1-debuginfo: install check OK
warning [i586]: python-module-traits=4.6.0-alt2: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traitsui=6.0.0-alt1 python-module-tvtk=4.6.2-alt1
i586: python-module-traits=4.6.0-alt2 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-24 22:44:10 :: [x86_64] #1300 python-module-traits-pickles: install check OK
2018-Sep-24 22:44:10 :: [i586] #1300 python-module-traits: install check OK
2018-Sep-24 22:45:11 :: [x86_64] #1300 python-module-traits-tests: install check OK
2018-Sep-24 22:45:20 :: [i586] #1300 python-module-traits-debuginfo: install check OK
2018-Sep-24 22:45:38 :: [i586] #1300 python-module-traits-doc: install check OK
2018-Sep-24 22:45:55 :: [i586] #1300 python-module-traits-pickles: install check OK
2018-Sep-24 22:45:57 :: [aarch64] #700 libvtk8.1-devel: install check OK
warning [x86_64]: python-module-traitsui=6.0.0-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traits=4.6.0-alt2 python-module-tvtk=4.6.2-alt1
x86_64: python-module-traitsui=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-24 22:46:13 :: [x86_64] #1200 python-module-traitsui: install check OK
2018-Sep-24 22:47:02 :: [i586] #1300 python-module-traits-tests: install check OK
2018-Sep-24 22:47:12 :: [aarch64] #700 libvtk8.1-python: install check OK
2018-Sep-24 22:47:15 :: [x86_64] #1200 python-module-traitsui-tests: install check OK
warning [i586]: python-module-traitsui=6.0.0-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traits=4.6.0-alt2 python-module-tvtk=4.6.2-alt1
i586: python-module-traitsui=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-24 22:48:12 :: [i586] #1200 python-module-traitsui: install check OK
warning [x86_64]: python-module-tvtk=4.6.2-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traits=4.6.0-alt2 python-module-traitsui=6.0.0-alt1
x86_64: python-module-tvtk=4.6.2-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-24 22:48:18 :: [x86_64] #1500 python-module-tvtk: install check OK
2018-Sep-24 22:49:20 :: [i586] #1200 python-module-traitsui-tests: install check OK
2018-Sep-24 22:49:21 :: [x86_64] #1500 python-module-tvtk-debuginfo: install check OK
2018-Sep-24 22:49:53 :: [aarch64] #700 libvtk8.1-python-debuginfo: install check OK
2018-Sep-24 22:50:22 :: [x86_64] #1500 python-module-tvtk.tests: install check OK
warning [i586]: python-module-tvtk=4.6.2-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traits=4.6.0-alt2 python-module-traitsui=6.0.0-alt1
i586: python-module-tvtk=4.6.2-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-24 22:50:30 :: [i586] #1500 python-module-tvtk: install check OK
2018-Sep-24 22:50:57 :: [x86_64] #700 python-module-vtk8.1: install check OK
aarch64: libvtk8.1-python-devel=8.1.1-alt1 post-install unowned files:
/usr/include/vtk-8.1
/usr/lib64/cmake
/usr/lib64/cmake/vtk-8.1
2018-Sep-24 22:51:05 :: [aarch64] #700 libvtk8.1-python-devel: install check OK
2018-Sep-24 22:51:39 :: [i586] #1500 python-module-tvtk-debuginfo: install check OK
2018-Sep-24 22:52:11 :: [aarch64] #700 libvtk8.1-tcl: install check OK
2018-Sep-24 22:52:30 :: [x86_64] #700 python-module-vtk8.1-debuginfo: install check OK
2018-Sep-24 22:52:48 :: [i586] #1500 python-module-tvtk.tests: install check OK
2018-Sep-24 22:53:05 :: [x86_64] #700 python-module-vtk8.1-tests: install check OK
2018-Sep-24 22:53:25 :: [i586] #700 python-module-vtk8.1: install check OK
2018-Sep-24 22:53:50 :: [x86_64] #600 vtk-data8.1: install check OK
2018-Sep-24 22:54:19 :: [x86_64] #700 vtk8.1: install check OK
2018-Sep-24 22:54:46 :: [aarch64] #700 libvtk8.1-tcl-debuginfo: install check OK
2018-Sep-24 22:54:55 :: [x86_64] #700 vtk8.1-data: install check OK
2018-Sep-24 22:55:07 :: [i586] #700 python-module-vtk8.1-debuginfo: install check OK
2018-Sep-24 22:55:44 :: [i586] #700 python-module-vtk8.1-tests: install check OK
2018-Sep-24 22:56:21 :: [x86_64] #700 vtk8.1-debuginfo: install check OK
2018-Sep-24 22:56:33 :: [i586] #600 vtk-data8.1: install check OK
2018-Sep-24 22:56:38 :: [aarch64] #700 libvtk8.1-tcl-devel: install check OK
2018-Sep-24 22:56:58 :: [x86_64] #700 vtk8.1-doc: install check OK
2018-Sep-24 22:57:02 :: [i586] #700 vtk8.1: install check OK
2018-Sep-24 22:57:39 :: [i586] #700 vtk8.1-data: install check OK
2018-Sep-24 22:57:44 :: [x86_64] #700 vtk8.1-examples: install check OK
2018-Sep-24 22:58:59 :: [aarch64] #1500 python-module-mayavi: install check OK
2018-Sep-24 22:59:13 :: [i586] #700 vtk8.1-debuginfo: install check OK
2018-Sep-24 22:59:23 :: [x86_64] #700 vtk8.1-examples-debuginfo: install check OK
2018-Sep-24 22:59:53 :: [i586] #700 vtk8.1-doc: install check OK
2018-Sep-24 22:59:59 :: [x86_64] #700 vtk8.1-python: install check OK
2018-Sep-24 23:00:42 :: [i586] #700 vtk8.1-examples: install check OK
2018-Sep-24 23:01:19 :: [aarch64] #1500 python-module-mayavi.tests: install check OK
2018-Sep-24 23:01:30 :: [x86_64] #700 vtk8.1-python-debuginfo: install check OK
2018-Sep-24 23:02:03 :: [x86_64] #700 vtk8.1-qt5-designer-plugin: install check OK
2018-Sep-24 23:02:31 :: [i586] #700 vtk8.1-examples-debuginfo: install check OK
2018-Sep-24 23:03:06 :: [x86_64] #700 vtk8.1-qt5-designer-plugin-debuginfo: install check OK
2018-Sep-24 23:03:10 :: [i586] #700 vtk8.1-python: install check OK
warning [aarch64]: python-module-pyface=6.0.0-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-traits=4.6.0-alt2 python-module-traitsui=6.0.0-alt1 python-module-tvtk=4.6.2-alt1
x86_64: vtk8.1-tcl=8.1.1-alt1 post-install unowned files:
/usr/lib/tcltk
2018-Sep-24 23:03:35 :: [x86_64] #700 vtk8.1-tcl: install check OK
aarch64: python-module-pyface=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-24 23:03:42 :: [aarch64] #1400 python-module-pyface: install check OK
2018-Sep-24 23:04:36 :: [aarch64] #1400 python-module-pyface-docs: install check OK
2018-Sep-24 23:04:49 :: [i586] #700 vtk8.1-python-debuginfo: install check OK
2018-Sep-24 23:05:01 :: [x86_64] #700 vtk8.1-tcl-debuginfo: install check OK
aarch64: python-module-pyface-pickles=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/pyface
2018-Sep-24 23:05:24 :: [i586] #700 vtk8.1-qt5-designer-plugin: install check OK
2018-Sep-24 23:05:24 :: [aarch64] #1400 python-module-pyface-pickles: install check OK
2018-Sep-24 23:05:48 :: [x86_64] #700 vtk8.1-tests: install check OK
2018-Sep-24 23:06:33 :: [i586] #700 vtk8.1-qt5-designer-plugin-debuginfo: install check OK
i586: vtk8.1-tcl=8.1.1-alt1 post-install unowned files:
/usr/lib/tcltk
2018-Sep-24 23:07:04 :: [i586] #700 vtk8.1-tcl: install check OK
2018-Sep-24 23:07:34 :: [x86_64] #700 vtk8.1-tests-debuginfo: install check OK
2018-Sep-24 23:07:39 :: [aarch64] #1400 python-module-pyface-tests: install check OK
2018-Sep-24 23:08:40 :: [i586] #700 vtk8.1-tcl-debuginfo: install check OK
2018-Sep-24 23:09:30 :: [i586] #700 vtk8.1-tests: install check OK
warning [aarch64]: python-module-traits=4.6.0-alt2: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traitsui=6.0.0-alt1 python-module-tvtk=4.6.2-alt1
aarch64: python-module-traits=4.6.0-alt2 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-24 23:10:04 :: [aarch64] #1300 python-module-traits: install check OK
2018-Sep-24 23:11:25 :: [i586] #700 vtk8.1-tests-debuginfo: install check OK
2018-Sep-24 23:12:59 :: [aarch64] #1300 python-module-traits-debuginfo: install check OK
2018-Sep-24 23:13:54 :: [aarch64] #1300 python-module-traits-doc: install check OK
2018-Sep-24 23:14:42 :: [aarch64] #1300 python-module-traits-pickles: install check OK
2018-Sep-24 23:17:02 :: [aarch64] #1300 python-module-traits-tests: install check OK
warning [aarch64]: python-module-traitsui=6.0.0-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traits=4.6.0-alt2 python-module-tvtk=4.6.2-alt1
aarch64: python-module-traitsui=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-24 23:19:25 :: [aarch64] #1200 python-module-traitsui: install check OK
2018-Sep-24 23:21:44 :: [aarch64] #1200 python-module-traitsui-tests: install check OK
warning [aarch64]: python-module-tvtk=4.6.2-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traits=4.6.0-alt2 python-module-traitsui=6.0.0-alt1
aarch64: python-module-tvtk=4.6.2-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-24 23:24:06 :: [aarch64] #1500 python-module-tvtk: install check OK
2018-Sep-24 23:26:30 :: [aarch64] #1500 python-module-tvtk-debuginfo: install check OK
2018-Sep-24 23:28:48 :: [aarch64] #1500 python-module-tvtk.tests: install check OK
2018-Sep-24 23:30:16 :: [aarch64] #700 python-module-vtk8.1: install check OK
2018-Sep-24 23:33:07 :: [aarch64] #700 python-module-vtk8.1-debuginfo: install check OK
2018-Sep-24 23:34:31 :: [aarch64] #700 python-module-vtk8.1-tests: install check OK
2018-Sep-24 23:35:58 :: [aarch64] #600 vtk-data8.1: install check OK
2018-Sep-24 23:37:06 :: [aarch64] #700 vtk8.1: install check OK
2018-Sep-24 23:38:19 :: [aarch64] #700 vtk8.1-data: install check OK
2018-Sep-24 23:40:53 :: [aarch64] #700 vtk8.1-debuginfo: install check OK
2018-Sep-24 23:42:31 :: [aarch64] #700 vtk8.1-doc: install check OK
2018-Sep-24 23:44:02 :: [aarch64] #700 vtk8.1-examples: install check OK
2018-Sep-24 23:46:53 :: [aarch64] #700 vtk8.1-examples-debuginfo: install check OK
2018-Sep-24 23:48:18 :: [aarch64] #700 vtk8.1-python: install check OK
2018-Sep-24 23:51:05 :: [aarch64] #700 vtk8.1-python-debuginfo: install check OK
2018-Sep-24 23:52:21 :: [aarch64] #700 vtk8.1-qt5-designer-plugin: install check OK
2018-Sep-24 23:54:18 :: [aarch64] #700 vtk8.1-qt5-designer-plugin-debuginfo: install check OK
aarch64: vtk8.1-tcl=8.1.1-alt1 post-install unowned files:
/usr/lib/tcltk
2018-Sep-24 23:55:29 :: [aarch64] #700 vtk8.1-tcl: install check OK
2018-Sep-24 23:58:07 :: [aarch64] #700 vtk8.1-tcl-debuginfo: install check OK
2018-Sep-24 23:59:42 :: [aarch64] #700 vtk8.1-tests: install check OK
2018-Sep-25 00:02:47 :: [aarch64] #700 vtk8.1-tests-debuginfo: install check OK
2018-Sep-25 00:02:59 :: [x86_64-i586] plan: #17 +17 -17 =11365
2018-Sep-25 00:05:18 :: [x86_64-i586] arepo build OK
2018-Sep-25 00:05:37 :: [x86_64-i586] generated apt indices
2018-Sep-25 00:05:37 :: [x86_64-i586] created next repo
2018-Sep-25 00:05:45 :: [x86_64-i586] dependencies check OK
2018-Sep-25 00:05:48 :: gears inheritance check OK
2018-Sep-25 00:05:48 :: srpm inheritance check OK
girar-check-perms: access to VTKLargeData ALLOWED for darktemplar: project is orphaned
girar-check-perms: access to vtk6.2 ALLOWED for darktemplar: project leader
girar-check-perms: access to vtk-data6.2 ALLOWED for darktemplar: project is orphaned
girar-check-perms: access to libharu ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to gl2ps ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to vtk-data8.1 ALLOWED for darktemplar: project `vtk-data8.1' is not listed in acl file for repository `sisyphus'
girar-check-perms: access to vtk8.1 ALLOWED for darktemplar: project `vtk8.1' is not listed in acl file for repository `sisyphus'
girar-check-perms: access to libmed ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to freecad ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to python-module-traitsui ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to python-module-traits ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to python-module-pyface ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to Mayavi ALLOWED for darktemplar: project is orphaned
2018-Sep-25 00:05:49 :: acl check OK
2018-Sep-25 00:06:19 :: created contents_index files
2018-Sep-25 00:06:34 :: created hash files: aarch64 i586 noarch src x86_64-i586 x86_64
2018-Sep-25 00:06:36 :: task #213453 for sisyphus TESTED
reply other threads:[~2018-09-25 0:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180925000636.GA5509@gyle.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=cas@altlinux.org \
--cc=darktemplar@altlinux.org \
--cc=python@packages.altlinux.org \
--cc=sbolshakov@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
--cc=viy@altlinux.org \
--cc=vvpi@altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git