[#208630] DONE (try 8) openscada.git=0.9.0-alt1

ALT Linux Girar Builder robot reports
 help / color / mirror / Atom feed

From: Girar Builder pender robot <girar-builder@altlinux.org>
To: Anton Midyukov <antohami@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org
Subject: [#208630] DONE (try 8) openscada.git=0.9.0-alt1
Date: Sat, 23 Jun 2018 05:44:40 +0000
Message-ID: <20180623054440.GA10638@gyle.altlinux.org> (raw)

http://git.altlinux.org/tasks/archive/done/_203/208630/logs/events.8.1.log

2018-Jun-23 02:28:11 :: task #208630 for sisyphus resumed by antohami:
#100 removed
#200 removed
#300 removed
#400 removed
#500 removed
#600 build 0.9.0-alt1 from /people/antohami/packages/openscada.git fetched at 2018-Jun-22 15:20:23
2018-Jun-23 02:28:12 :: [aarch64] #600 openscada.git 0.9.0-alt1: build start
2018-Jun-23 02:28:12 :: [i586] #600 openscada.git 0.9.0-alt1: build start
2018-Jun-23 02:28:12 :: [x86_64] #600 openscada.git 0.9.0-alt1: build start
2018-Jun-23 02:28:47 :: [x86_64] openscada.git 0.9.0-alt1: remote: no need to rebuild
2018-Jun-23 02:28:47 :: [i586] openscada.git 0.9.0-alt1: remote: no need to rebuild
2018-Jun-23 02:28:47 :: [i586] #600 openscada.git 0.9.0-alt1: build OK
2018-Jun-23 02:28:48 :: [x86_64] #600 openscada.git 0.9.0-alt1: build OK
2018-Jun-23 02:29:33 :: [aarch64] openscada.git 0.9.0-alt1: remote: no need to rebuild
2018-Jun-23 02:29:33 :: [aarch64] #600 openscada.git 0.9.0-alt1: build OK
2018-Jun-23 02:32:08 :: build check OK
2018-Jun-23 02:40:35 :: noarch check OK
2018-Jun-23 02:40:42 :: plan: src +1 -1 =18576, aarch64 +88 -80 =28530, i586 +92 -84 =34162, noarch +10 -8 =18969, x86_64 +88 -80 =34200
2018-Jun-23 02:40:45 :: version check OK
2018-Jun-23 02:46:50 :: generated apt indices
2018-Jun-23 02:46:51 :: created next repo
2018-Jun-23 02:48:01 :: dependencies check OK
2018-Jun-23 02:52:04 :: ELF symbols check OK
2018-Jun-23 02:52:27 :: [x86_64] #600 libopenscada: no need to repeat, install check SKIPPED
2018-Jun-23 02:52:27 :: [i586] #600 libopenscada: no need to repeat, install check SKIPPED
2018-Jun-23 02:52:40 :: [x86_64] #600 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2018-Jun-23 02:52:40 :: [i586] #600 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2018-Jun-23 02:53:00 :: [aarch64] #600 libopenscada: no need to repeat, install check SKIPPED
2018-Jun-23 02:53:27 :: [x86_64] #600 openscada: install check OK
2018-Jun-23 02:53:32 :: [i586] #600 openscada: install check OK
2018-Jun-23 02:53:37 :: [aarch64] #600 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2018-Jun-23 02:54:10 :: [x86_64] #600 openscada-Archive.DBArch: install check OK
2018-Jun-23 02:54:20 :: [i586] #600 openscada-Archive.DBArch: install check OK
2018-Jun-23 02:54:57 :: [x86_64] #600 openscada-Archive.DBArch-debuginfo: install check OK
2018-Jun-23 02:55:10 :: [i586] #600 openscada-Archive.DBArch-debuginfo: install check OK
2018-Jun-23 02:55:25 :: [aarch64] #600 openscada: install check OK
2018-Jun-23 02:55:41 :: [x86_64] #600 openscada-Archive.FSArch: install check OK
2018-Jun-23 02:55:58 :: [i586] #600 openscada-Archive.FSArch: install check OK
2018-Jun-23 02:56:28 :: [x86_64] #600 openscada-Archive.FSArch-debuginfo: install check OK
2018-Jun-23 02:56:48 :: [i586] #600 openscada-Archive.FSArch-debuginfo: install check OK
2018-Jun-23 02:57:08 :: [aarch64] #600 openscada-Archive.DBArch: install check OK
2018-Jun-23 02:57:12 :: [x86_64] #600 openscada-DAQ.AMRDevs: install check OK
2018-Jun-23 02:57:36 :: [i586] #600 openscada-DAQ.AMRDevs: install check OK
2018-Jun-23 02:57:58 :: [x86_64] #600 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Jun-23 02:58:25 :: [i586] #600 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Jun-23 02:58:42 :: [x86_64] #600 openscada-DAQ.BFN: install check OK
2018-Jun-23 02:58:56 :: [aarch64] #600 openscada-Archive.DBArch-debuginfo: install check OK
2018-Jun-23 02:59:13 :: [i586] #600 openscada-DAQ.BFN: install check OK
2018-Jun-23 02:59:28 :: [x86_64] #600 openscada-DAQ.BFN-debuginfo: install check OK
2018-Jun-23 03:00:03 :: [i586] #600 openscada-DAQ.BFN-debuginfo: install check OK
2018-Jun-23 03:00:12 :: [x86_64] #600 openscada-DAQ.BlockCalc: install check OK
2018-Jun-23 03:00:36 :: [aarch64] #600 openscada-Archive.FSArch: install check OK
2018-Jun-23 03:00:51 :: [i586] #600 openscada-DAQ.BlockCalc: install check OK
2018-Jun-23 03:00:58 :: [x86_64] #600 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Jun-23 03:01:42 :: [x86_64] #600 openscada-DAQ.Comedi: install check OK
2018-Jun-23 03:01:42 :: [i586] #600 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Jun-23 03:02:20 :: [aarch64] #600 openscada-Archive.FSArch-debuginfo: install check OK
2018-Jun-23 03:02:28 :: [x86_64] #600 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Jun-23 03:02:29 :: [i586] #600 openscada-DAQ.Comedi: install check OK
2018-Jun-23 03:03:12 :: [x86_64] #600 openscada-DAQ.DAQGate: install check OK
2018-Jun-23 03:03:19 :: [i586] #600 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Jun-23 03:04:21 :: [aarch64] #600 openscada-DAQ.AMRDevs: install check OK
2018-Jun-23 03:04:37 :: [x86_64] #600 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Jun-23 03:04:41 :: [i586] #600 openscada-DAQ.DAQGate: install check OK
2018-Jun-23 03:05:21 :: [x86_64] #600 openscada-DAQ.DCON: install check OK
2018-Jun-23 03:05:31 :: [i586] #600 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Jun-23 03:06:07 :: [x86_64] #600 openscada-DAQ.DCON-debuginfo: install check OK
2018-Jun-23 03:06:10 :: [aarch64] #600 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Jun-23 03:06:18 :: [i586] #600 openscada-DAQ.DCON: install check OK
2018-Jun-23 03:06:51 :: [x86_64] #600 openscada-DAQ.GPIO: install check OK
2018-Jun-23 03:07:09 :: [i586] #600 openscada-DAQ.DCON-debuginfo: install check OK
2018-Jun-23 03:07:36 :: [x86_64] #600 openscada-DAQ.GPIO-debuginfo: install check OK
2018-Jun-23 03:07:50 :: [aarch64] #600 openscada-DAQ.BFN: install check OK
2018-Jun-23 03:07:56 :: [i586] #600 openscada-DAQ.DiamondBoards: install check OK
2018-Jun-23 03:08:20 :: [x86_64] #600 openscada-DAQ.JavaLikeCalc: install check OK
2018-Jun-23 03:08:45 :: [i586] #600 openscada-DAQ.DiamondBoards-debuginfo: install check OK
2018-Jun-23 03:09:06 :: [x86_64] #600 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Jun-23 03:09:32 :: [i586] #600 openscada-DAQ.GPIO: install check OK
2018-Jun-23 03:09:33 :: [aarch64] #600 openscada-DAQ.BFN-debuginfo: install check OK
2018-Jun-23 03:09:50 :: [x86_64] #600 openscada-DAQ.LogicLev: install check OK
2018-Jun-23 03:10:23 :: [i586] #600 openscada-DAQ.GPIO-debuginfo: install check OK
2018-Jun-23 03:10:35 :: [x86_64] #600 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Jun-23 03:11:10 :: [i586] #600 openscada-DAQ.ICP_DAS: install check OK
2018-Jun-23 03:11:16 :: [aarch64] #600 openscada-DAQ.BlockCalc: install check OK
2018-Jun-23 03:11:19 :: [x86_64] #600 openscada-DAQ.MMS: install check OK
2018-Jun-23 03:12:01 :: [i586] #600 openscada-DAQ.ICP_DAS-debuginfo: install check OK
2018-Jun-23 03:12:05 :: [x86_64] #600 openscada-DAQ.MMS-debuginfo: install check OK
2018-Jun-23 03:12:48 :: [i586] #600 openscada-DAQ.JavaLikeCalc: install check OK
2018-Jun-23 03:12:49 :: [x86_64] #600 openscada-DAQ.ModBus: install check OK
2018-Jun-23 03:13:00 :: [aarch64] #600 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Jun-23 03:13:35 :: [x86_64] #600 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Jun-23 03:13:38 :: [i586] #600 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Jun-23 03:14:19 :: [x86_64] #600 openscada-DAQ.OPC_UA: install check OK
2018-Jun-23 03:14:26 :: [i586] #600 openscada-DAQ.LogicLev: install check OK
2018-Jun-23 03:14:41 :: [aarch64] #600 openscada-DAQ.Comedi: install check OK
2018-Jun-23 03:15:05 :: [x86_64] #600 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Jun-23 03:15:16 :: [i586] #600 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Jun-23 03:15:49 :: [x86_64] #600 openscada-DAQ.SNMP: install check OK
2018-Jun-23 03:16:03 :: [i586] #600 openscada-DAQ.MMS: install check OK
2018-Jun-23 03:16:26 :: [aarch64] #600 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Jun-23 03:16:38 :: [x86_64] #600 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Jun-23 03:16:53 :: [i586] #600 openscada-DAQ.MMS-debuginfo: install check OK
2018-Jun-23 03:17:22 :: [x86_64] #600 openscada-DAQ.Siemens: install check OK
2018-Jun-23 03:17:41 :: [i586] #600 openscada-DAQ.ModBus: install check OK
2018-Jun-23 03:18:04 :: [aarch64] #600 openscada-DAQ.DAQGate: install check OK
2018-Jun-23 03:18:08 :: [x86_64] #600 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Jun-23 03:18:31 :: [i586] #600 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Jun-23 03:18:52 :: [x86_64] #600 openscada-DAQ.SoundCard: install check OK
2018-Jun-23 03:19:19 :: [i586] #600 openscada-DAQ.OPC_UA: install check OK
2018-Jun-23 03:19:39 :: [x86_64] #600 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Jun-23 03:19:50 :: [aarch64] #600 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Jun-23 03:20:10 :: [i586] #600 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Jun-23 03:20:23 :: [x86_64] #600 openscada-DAQ.System: install check OK
2018-Jun-23 03:20:58 :: [i586] #600 openscada-DAQ.SNMP: install check OK
2018-Jun-23 03:21:09 :: [x86_64] #600 openscada-DAQ.System-debuginfo: install check OK
2018-Jun-23 03:21:30 :: [aarch64] #600 openscada-DAQ.DCON: install check OK
2018-Jun-23 03:21:50 :: [i586] #600 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Jun-23 03:21:52 :: [x86_64] #600 openscada-DB.DBF: install check OK
2018-Jun-23 03:22:37 :: [i586] #600 openscada-DAQ.Siemens: install check OK
2018-Jun-23 03:22:38 :: [x86_64] #600 openscada-DB.DBF-debuginfo: install check OK
2018-Jun-23 03:23:21 :: [aarch64] #600 openscada-DAQ.DCON-debuginfo: install check OK
2018-Jun-23 03:23:21 :: [x86_64] #600 openscada-DB.FireBird: install check OK
2018-Jun-23 03:23:28 :: [i586] #600 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Jun-23 03:24:08 :: [x86_64] #600 openscada-DB.FireBird-debuginfo: install check OK
2018-Jun-23 03:24:16 :: [i586] #600 openscada-DAQ.SoundCard: install check OK
2018-Jun-23 03:24:52 :: [x86_64] #600 openscada-DB.MySQL: install check OK
2018-Jun-23 03:24:59 :: [aarch64] #600 openscada-DAQ.GPIO: install check OK
2018-Jun-23 03:25:06 :: [i586] #600 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Jun-23 03:25:40 :: [x86_64] #600 openscada-DB.MySQL-debuginfo: install check OK
2018-Jun-23 03:25:54 :: [i586] #600 openscada-DAQ.System: install check OK
2018-Jun-23 03:26:24 :: [x86_64] #600 openscada-DB.PostgreSQL: install check OK
2018-Jun-23 03:26:44 :: [i586] #600 openscada-DAQ.System-debuginfo: install check OK
2018-Jun-23 03:26:44 :: [aarch64] #600 openscada-DAQ.GPIO-debuginfo: install check OK
2018-Jun-23 03:27:12 :: [x86_64] #600 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Jun-23 03:27:32 :: [i586] #600 openscada-DB.DBF: install check OK
2018-Jun-23 03:27:56 :: [x86_64] #600 openscada-DB.SQLite: install check OK
2018-Jun-23 03:28:21 :: [i586] #600 openscada-DB.DBF-debuginfo: install check OK
2018-Jun-23 03:28:24 :: [aarch64] #600 openscada-DAQ.JavaLikeCalc: install check OK
2018-Jun-23 03:28:43 :: [x86_64] #600 openscada-DB.SQLite-debuginfo: install check OK
2018-Jun-23 03:29:09 :: [i586] #600 openscada-DB.FireBird: install check OK
2018-Jun-23 03:29:27 :: [x86_64] #600 openscada-LibDB.Main: install check OK
2018-Jun-23 03:30:00 :: [i586] #600 openscada-DB.FireBird-debuginfo: install check OK
2018-Jun-23 03:30:08 :: [aarch64] #600 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Jun-23 03:30:11 :: [x86_64] #600 openscada-LibDB.VCA: install check OK
2018-Jun-23 03:30:48 :: [i586] #600 openscada-DB.MySQL: install check OK
2018-Jun-23 03:30:58 :: [x86_64] #600 openscada-Model.AGLKS: install check OK
2018-Jun-23 03:31:40 :: [i586] #600 openscada-DB.MySQL-debuginfo: install check OK
2018-Jun-23 03:31:44 :: [x86_64] #600 openscada-Model.Boiler: install check OK
2018-Jun-23 03:31:51 :: [aarch64] #600 openscada-DAQ.LogicLev: install check OK
2018-Jun-23 03:32:27 :: [x86_64] #600 openscada-Protocol.HTTP: install check OK
2018-Jun-23 03:32:28 :: [i586] #600 openscada-DB.PostgreSQL: install check OK
2018-Jun-23 03:33:13 :: [x86_64] #600 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Jun-23 03:33:20 :: [i586] #600 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Jun-23 03:33:34 :: [aarch64] #600 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Jun-23 03:33:57 :: [x86_64] #600 openscada-Protocol.SelfSystem: install check OK
2018-Jun-23 03:34:07 :: [i586] #600 openscada-DB.SQLite: install check OK
2018-Jun-23 03:34:43 :: [x86_64] #600 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Jun-23 03:34:57 :: [i586] #600 openscada-DB.SQLite-debuginfo: install check OK
2018-Jun-23 03:35:20 :: [aarch64] #600 openscada-DAQ.MMS: install check OK
2018-Jun-23 03:35:27 :: [x86_64] #600 openscada-Protocol.UserProtocol: install check OK
2018-Jun-23 03:35:45 :: [i586] #600 openscada-LibDB.Main: install check OK
2018-Jun-23 03:36:13 :: [x86_64] #600 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Jun-23 03:36:33 :: [i586] #600 openscada-LibDB.VCA: install check OK
2018-Jun-23 03:36:57 :: [x86_64] #600 openscada-Special.FLibComplex1: install check OK
2018-Jun-23 03:37:05 :: [aarch64] #600 openscada-DAQ.MMS-debuginfo: install check OK
2018-Jun-23 03:37:23 :: [i586] #600 openscada-Model.AGLKS: install check OK
2018-Jun-23 03:37:43 :: [x86_64] #600 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Jun-23 03:38:14 :: [i586] #600 openscada-Model.Boiler: install check OK
2018-Jun-23 03:38:27 :: [x86_64] #600 openscada-Special.FLibMath: install check OK
2018-Jun-23 03:38:48 :: [aarch64] #600 openscada-DAQ.ModBus: install check OK
2018-Jun-23 03:39:01 :: [i586] #600 openscada-Protocol.HTTP: install check OK
2018-Jun-23 03:39:13 :: [x86_64] #600 openscada-Special.FLibMath-debuginfo: install check OK
2018-Jun-23 03:39:51 :: [i586] #600 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Jun-23 03:39:57 :: [x86_64] #600 openscada-Special.FLibSYS: install check OK
2018-Jun-23 03:40:34 :: [aarch64] #600 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Jun-23 03:40:39 :: [i586] #600 openscada-Protocol.SelfSystem: install check OK
2018-Jun-23 03:40:44 :: [x86_64] #600 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Jun-23 03:41:28 :: [x86_64] #600 openscada-Special.SystemTests: install check OK
2018-Jun-23 03:41:28 :: [i586] #600 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Jun-23 03:42:13 :: [aarch64] #600 openscada-DAQ.OPC_UA: install check OK
2018-Jun-23 03:42:14 :: [x86_64] #600 openscada-Special.SystemTests-debuginfo: install check OK
2018-Jun-23 03:42:15 :: [i586] #600 openscada-Protocol.UserProtocol: install check OK
2018-Jun-23 03:42:58 :: [x86_64] #600 openscada-Transport.SSL: install check OK
2018-Jun-23 03:43:06 :: [i586] #600 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Jun-23 03:43:44 :: [x86_64] #600 openscada-Transport.SSL-debuginfo: install check OK
2018-Jun-23 03:43:53 :: [i586] #600 openscada-Special.FLibComplex1: install check OK
2018-Jun-23 03:43:56 :: [aarch64] #600 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Jun-23 03:44:28 :: [x86_64] #600 openscada-Transport.Serial: install check OK
2018-Jun-23 03:44:43 :: [i586] #600 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Jun-23 03:45:15 :: [x86_64] #600 openscada-Transport.Serial-debuginfo: install check OK
2018-Jun-23 03:45:31 :: [i586] #600 openscada-Special.FLibMath: install check OK
2018-Jun-23 03:45:38 :: [aarch64] #600 openscada-DAQ.SNMP: install check OK
2018-Jun-23 03:45:59 :: [x86_64] #600 openscada-Transport.Sockets: install check OK
2018-Jun-23 03:46:21 :: [i586] #600 openscada-Special.FLibMath-debuginfo: install check OK
2018-Jun-23 03:46:45 :: [x86_64] #600 openscada-Transport.Sockets-debuginfo: install check OK
2018-Jun-23 03:47:09 :: [i586] #600 openscada-Special.FLibSYS: install check OK
2018-Jun-23 03:47:26 :: [aarch64] #600 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Jun-23 03:47:30 :: [x86_64] #600 openscada-UI.QTCfg: install check OK
2018-Jun-23 03:48:01 :: [i586] #600 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Jun-23 03:48:42 :: [x86_64] #600 openscada-UI.QTCfg-debuginfo: install check OK
2018-Jun-23 03:48:48 :: [i586] #600 openscada-Special.SystemTests: install check OK
2018-Jun-23 03:49:05 :: [aarch64] #600 openscada-DAQ.Siemens: install check OK
2018-Jun-23 03:49:28 :: [x86_64] #600 openscada-UI.QTStarter: install check OK
2018-Jun-23 03:49:38 :: [i586] #600 openscada-Special.SystemTests-debuginfo: install check OK
2018-Jun-23 03:50:25 :: [i586] #600 openscada-Transport.SSL: install check OK
2018-Jun-23 03:50:50 :: [x86_64] #600 openscada-UI.QTStarter-debuginfo: install check OK
2018-Jun-23 03:50:52 :: [aarch64] #600 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Jun-23 03:51:17 :: [i586] #600 openscada-Transport.SSL-debuginfo: install check OK
2018-Jun-23 03:51:35 :: [x86_64] #600 openscada-UI.VCAEngine: install check OK
2018-Jun-23 03:52:05 :: [i586] #600 openscada-Transport.Serial: install check OK
2018-Jun-23 03:52:22 :: [x86_64] #600 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Jun-23 03:52:29 :: [aarch64] #600 openscada-DAQ.SoundCard: install check OK
2018-Jun-23 03:52:55 :: [i586] #600 openscada-Transport.Serial-debuginfo: install check OK
2018-Jun-23 03:53:07 :: [x86_64] #600 openscada-UI.Vision: install check OK
2018-Jun-23 03:53:43 :: [i586] #600 openscada-Transport.Sockets: install check OK
2018-Jun-23 03:54:15 :: [aarch64] #600 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Jun-23 03:54:21 :: [x86_64] #600 openscada-UI.Vision-debuginfo: install check OK
2018-Jun-23 03:54:33 :: [i586] #600 openscada-Transport.Sockets-debuginfo: install check OK
2018-Jun-23 03:55:05 :: [x86_64] #600 openscada-UI.WebCfg: install check OK
2018-Jun-23 03:55:23 :: [i586] #600 openscada-UI.QTCfg: install check OK
2018-Jun-23 03:55:50 :: [x86_64] #600 openscada-UI.WebCfg-debuginfo: install check OK
2018-Jun-23 03:55:59 :: [aarch64] #600 openscada-DAQ.System: install check OK
2018-Jun-23 03:56:34 :: [x86_64] #600 openscada-UI.WebCfgD: install check OK
2018-Jun-23 03:56:42 :: [i586] #600 openscada-UI.QTCfg-debuginfo: install check OK
2018-Jun-23 03:57:20 :: [x86_64] #600 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Jun-23 03:57:32 :: [i586] #600 openscada-UI.QTStarter: install check OK
2018-Jun-23 03:57:47 :: [aarch64] #600 openscada-DAQ.System-debuginfo: install check OK
2018-Jun-23 03:58:04 :: [x86_64] #600 openscada-UI.WebUser: install check OK
2018-Jun-23 03:58:50 :: [x86_64] #600 openscada-UI.WebUser-debuginfo: install check OK
2018-Jun-23 03:59:04 :: [i586] #600 openscada-UI.QTStarter-debuginfo: install check OK
2018-Jun-23 03:59:26 :: [aarch64] #600 openscada-DB.DBF: install check OK
2018-Jun-23 03:59:34 :: [x86_64] #600 openscada-UI.WebVision: install check OK
2018-Jun-23 03:59:52 :: [i586] #600 openscada-UI.VCAEngine: install check OK
2018-Jun-23 04:00:24 :: [x86_64] #600 openscada-UI.WebVision-debuginfo: install check OK
2018-Jun-23 04:00:42 :: [i586] #600 openscada-UI.VCAEngine-debuginfo: install check OK
	x86_64: openscada-core=0.9.0-alt1 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Jun-23 04:01:07 :: [x86_64] #600 openscada-core: install check OK
2018-Jun-23 04:01:11 :: [aarch64] #600 openscada-DB.DBF-debuginfo: install check OK
2018-Jun-23 04:01:32 :: [i586] #600 openscada-UI.Vision: install check OK
2018-Jun-23 04:01:53 :: [x86_64] #600 openscada-core-debuginfo: install check OK
2018-Jun-23 04:02:07 :: [x86_64] #600 openscada-devel: no need to repeat, install check SKIPPED
2018-Jun-23 04:02:19 :: [x86_64] #600 openscada-docEN: no need to repeat, install check SKIPPED
2018-Jun-23 04:02:32 :: [x86_64] #600 openscada-docRU: no need to repeat, install check SKIPPED
2018-Jun-23 04:02:45 :: [x86_64] #600 openscada-docUK: no need to repeat, install check SKIPPED
2018-Jun-23 04:02:50 :: [aarch64] #600 openscada-DB.FireBird: install check OK
2018-Jun-23 04:02:52 :: [i586] #600 openscada-UI.Vision-debuginfo: install check OK
2018-Jun-23 04:03:28 :: [x86_64] #600 openscada-plc: install check OK
2018-Jun-23 04:03:40 :: [i586] #600 openscada-UI.WebCfg: install check OK
2018-Jun-23 04:04:13 :: [x86_64] #600 openscada-server: install check OK
2018-Jun-23 04:04:30 :: [i586] #600 openscada-UI.WebCfg-debuginfo: install check OK
2018-Jun-23 04:04:37 :: [aarch64] #600 openscada-DB.FireBird-debuginfo: install check OK
2018-Jun-23 04:05:00 :: [x86_64] #600 openscada-visStation: install check OK
2018-Jun-23 04:05:17 :: [i586] #600 openscada-UI.WebCfgD: install check OK
2018-Jun-23 04:06:07 :: [i586] #600 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Jun-23 04:06:15 :: [aarch64] #600 openscada-DB.MySQL: install check OK
2018-Jun-23 04:06:55 :: [i586] #600 openscada-UI.WebUser: install check OK
2018-Jun-23 04:07:45 :: [i586] #600 openscada-UI.WebUser-debuginfo: install check OK
2018-Jun-23 04:08:00 :: [aarch64] #600 openscada-DB.MySQL-debuginfo: install check OK
2018-Jun-23 04:08:32 :: [i586] #600 openscada-UI.WebVision: install check OK
2018-Jun-23 04:09:26 :: [i586] #600 openscada-UI.WebVision-debuginfo: install check OK
2018-Jun-23 04:09:41 :: [aarch64] #600 openscada-DB.PostgreSQL: install check OK
	i586: openscada-core=0.9.0-alt1 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Jun-23 04:10:14 :: [i586] #600 openscada-core: install check OK
2018-Jun-23 04:11:04 :: [i586] #600 openscada-core-debuginfo: install check OK
2018-Jun-23 04:11:17 :: [i586] #600 openscada-devel: no need to repeat, install check SKIPPED
2018-Jun-23 04:11:30 :: [i586] #600 openscada-docEN: no need to repeat, install check SKIPPED
2018-Jun-23 04:11:35 :: [aarch64] #600 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Jun-23 04:11:43 :: [i586] #600 openscada-docRU: no need to repeat, install check SKIPPED
2018-Jun-23 04:11:55 :: [i586] #600 openscada-docUK: no need to repeat, install check SKIPPED
2018-Jun-23 04:12:43 :: [i586] #600 openscada-plc: install check OK
2018-Jun-23 04:13:15 :: [aarch64] #600 openscada-DB.SQLite: install check OK
2018-Jun-23 04:13:32 :: [i586] #600 openscada-server: install check OK
2018-Jun-23 04:14:24 :: [i586] #600 openscada-visStation: install check OK
2018-Jun-23 04:15:02 :: [aarch64] #600 openscada-DB.SQLite-debuginfo: install check OK
2018-Jun-23 04:16:46 :: [aarch64] #600 openscada-LibDB.Main: install check OK
2018-Jun-23 04:18:30 :: [aarch64] #600 openscada-LibDB.VCA: install check OK
2018-Jun-23 04:20:15 :: [aarch64] #600 openscada-Model.AGLKS: install check OK
2018-Jun-23 04:21:57 :: [aarch64] #600 openscada-Model.Boiler: install check OK
2018-Jun-23 04:23:34 :: [aarch64] #600 openscada-Protocol.HTTP: install check OK
2018-Jun-23 04:25:23 :: [aarch64] #600 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Jun-23 04:27:04 :: [aarch64] #600 openscada-Protocol.SelfSystem: install check OK
2018-Jun-23 04:28:49 :: [aarch64] #600 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Jun-23 04:30:33 :: [aarch64] #600 openscada-Protocol.UserProtocol: install check OK
2018-Jun-23 04:32:19 :: [aarch64] #600 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Jun-23 04:34:00 :: [aarch64] #600 openscada-Special.FLibComplex1: install check OK
2018-Jun-23 04:35:46 :: [aarch64] #600 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Jun-23 04:37:26 :: [aarch64] #600 openscada-Special.FLibMath: install check OK
2018-Jun-23 04:39:09 :: [aarch64] #600 openscada-Special.FLibMath-debuginfo: install check OK
2018-Jun-23 04:40:52 :: [aarch64] #600 openscada-Special.FLibSYS: install check OK
2018-Jun-23 04:42:40 :: [aarch64] #600 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Jun-23 04:44:24 :: [aarch64] #600 openscada-Special.SystemTests: install check OK
2018-Jun-23 04:46:10 :: [aarch64] #600 openscada-Special.SystemTests-debuginfo: install check OK
2018-Jun-23 04:47:52 :: [aarch64] #600 openscada-Transport.SSL: install check OK
2018-Jun-23 04:49:38 :: [aarch64] #600 openscada-Transport.SSL-debuginfo: install check OK
2018-Jun-23 04:51:22 :: [aarch64] #600 openscada-Transport.Serial: install check OK
2018-Jun-23 04:53:08 :: [aarch64] #600 openscada-Transport.Serial-debuginfo: install check OK
2018-Jun-23 04:54:46 :: [aarch64] #600 openscada-Transport.Sockets: install check OK
2018-Jun-23 04:56:32 :: [aarch64] #600 openscada-Transport.Sockets-debuginfo: install check OK
2018-Jun-23 04:58:15 :: [aarch64] #600 openscada-UI.QTCfg: install check OK
2018-Jun-23 05:00:41 :: [aarch64] #600 openscada-UI.QTCfg-debuginfo: install check OK
2018-Jun-23 05:02:24 :: [aarch64] #600 openscada-UI.QTStarter: install check OK
2018-Jun-23 05:05:14 :: [aarch64] #600 openscada-UI.QTStarter-debuginfo: install check OK
2018-Jun-23 05:06:59 :: [aarch64] #600 openscada-UI.VCAEngine: install check OK
2018-Jun-23 05:08:48 :: [aarch64] #600 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Jun-23 05:10:35 :: [aarch64] #600 openscada-UI.Vision: install check OK
2018-Jun-23 05:13:04 :: [aarch64] #600 openscada-UI.Vision-debuginfo: install check OK
2018-Jun-23 05:14:48 :: [aarch64] #600 openscada-UI.WebCfg: install check OK
2018-Jun-23 05:16:33 :: [aarch64] #600 openscada-UI.WebCfg-debuginfo: install check OK
2018-Jun-23 05:18:11 :: [aarch64] #600 openscada-UI.WebCfgD: install check OK
2018-Jun-23 05:19:57 :: [aarch64] #600 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Jun-23 05:21:43 :: [aarch64] #600 openscada-UI.WebUser: install check OK
2018-Jun-23 05:23:29 :: [aarch64] #600 openscada-UI.WebUser-debuginfo: install check OK
2018-Jun-23 05:25:15 :: [aarch64] #600 openscada-UI.WebVision: install check OK
2018-Jun-23 05:27:06 :: [aarch64] #600 openscada-UI.WebVision-debuginfo: install check OK
	aarch64: openscada-core=0.9.0-alt1 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Jun-23 05:28:51 :: [aarch64] #600 openscada-core: install check OK
2018-Jun-23 05:30:38 :: [aarch64] #600 openscada-core-debuginfo: install check OK
2018-Jun-23 05:31:13 :: [aarch64] #600 openscada-devel: no need to repeat, install check SKIPPED
2018-Jun-23 05:31:47 :: [aarch64] #600 openscada-docEN: no need to repeat, install check SKIPPED
2018-Jun-23 05:32:21 :: [aarch64] #600 openscada-docRU: no need to repeat, install check SKIPPED
2018-Jun-23 05:32:55 :: [aarch64] #600 openscada-docUK: no need to repeat, install check SKIPPED
2018-Jun-23 05:34:36 :: [aarch64] #600 openscada-plc: install check OK
2018-Jun-23 05:36:16 :: [aarch64] #600 openscada-server: install check OK
2018-Jun-23 05:38:01 :: [aarch64] #600 openscada-visStation: install check OK
2018-Jun-23 05:38:16 :: [x86_64-i586] plan: #45 +45 -41 =11475
2018-Jun-23 05:40:19 :: [x86_64-i586] arepo build OK
2018-Jun-23 05:40:57 :: [x86_64-i586] generated apt indices
2018-Jun-23 05:40:57 :: [x86_64-i586] created next repo
2018-Jun-23 05:41:05 :: [x86_64-i586] dependencies check OK
2018-Jun-23 05:41:07 :: gears inheritance check OK
2018-Jun-23 05:41:07 :: srpm inheritance check OK
girar-check-perms: access to openscada ALLOWED for antohami: project leader
2018-Jun-23 05:41:07 :: acl check OK
2018-Jun-23 05:42:21 :: created contents_index files
2018-Jun-23 05:42:36 :: created hash files: aarch64 i586 noarch src x86_64-i586 x86_64
2018-Jun-23 05:42:37 :: task #208630 for sisyphus TESTED
2018-Jun-23 05:42:38 :: task is ready for commit
2018-Jun-23 05:42:54 :: repo clone OK
2018-Jun-23 05:43:29 :: packages update OK
2018-Jun-23 05:43:32 :: [x86_64 i586 aarch64 noarch] update OK
2018-Jun-23 05:43:37 :: [x86_64-i586] update OK
2018-Jun-23 05:43:37 :: repo update OK
2018-Jun-23 05:43:52 :: repo save OK
2018-Jun-23 05:43:58 :: updated /gears/o/openscada.git branch `sisyphus'
2018-Jun-23 05:44:36 :: gears update OK
2018-Jun-23 05:44:36 :: task #208630 for sisyphus DONE

                 reply	other threads:[~2018-06-23  5:44 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180623054440.GA10638@gyle.altlinux.org \
    --to=girar-builder@altlinux.org \
    --cc=antohami@altlinux.org \
    --cc=sisyphus-incominger@lists.altlinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

ALT Linux Girar Builder robot reports

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
		sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
	public-inbox-index sisyphus-incominger

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git