From: Girar Builder pender robot <girar-builder@altlinux.org>
To: Roman Savochenko <rom_as@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org
Subject: [#144854] 5.1 DONE openscada.git=0.8.13-alt0.M51.1
Date: Thu, 28 May 2015 19:38:11 +0000
Message-ID: <20150528193811.GA19576@gitery.altlinux.org> (raw)
http://git.altlinux.org/tasks/archive/done/_141/144854/logs/events.1.1.log
2015-May-28 18:55:13 :: task #144854 for 5.1 started by rom_as:
#100 build 0.8.13-alt0.M51.1 from /people/rom_as/packages/openscada.git
2015-May-28 18:55:24 :: [i586] #100 openscada.git 0.8.13-alt0.M51.1: build start
2015-May-28 18:55:24 :: [x86_64] #100 openscada.git 0.8.13-alt0.M51.1: build start
2015-May-28 19:11:23 :: [x86_64] #100 openscada.git 0.8.13-alt0.M51.1: build OK
2015-May-28 19:12:59 :: [i586] #100 openscada.git 0.8.13-alt0.M51.1: build OK
2015-May-28 19:13:30 :: build check OK
2015-May-28 19:13:55 :: noarch check OK
2015-May-28 19:13:56 :: plan: src +1 -1 =9782, i586 +44 -44 =12222, noarch +8 -8 =8282, x86_64 +42 -42 =12062
2015-May-28 19:13:56 :: version check OK
2015-May-28 19:21:44 :: generated apt indices
2015-May-28 19:21:44 :: created next repo
2015-May-28 19:21:47 :: dependencies check OK
2015-May-28 19:26:11 :: ELF symbols check OK
2015-May-28 19:26:50 :: [x86_64] #100 openscada: install check OK
2015-May-28 19:26:51 :: [i586] #100 openscada: install check OK
x86_64: openscada-Archive.DBArch=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:27:00 :: [x86_64] #100 openscada-Archive.DBArch: install check OK
i586: openscada-Archive.DBArch=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:27:01 :: [i586] #100 openscada-Archive.DBArch: install check OK
x86_64: openscada-Archive.FSArch=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:27:10 :: [x86_64] #100 openscada-Archive.FSArch: install check OK
i586: openscada-Archive.FSArch=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:27:11 :: [i586] #100 openscada-Archive.FSArch: install check OK
x86_64: openscada-DAQ.BFN=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:27:19 :: [x86_64] #100 openscada-DAQ.BFN: install check OK
i586: openscada-DAQ.BFN=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:27:21 :: [i586] #100 openscada-DAQ.BFN: install check OK
x86_64: openscada-DAQ.BlockCalc=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:27:29 :: [x86_64] #100 openscada-DAQ.BlockCalc: install check OK
i586: openscada-DAQ.BlockCalc=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:27:31 :: [i586] #100 openscada-DAQ.BlockCalc: install check OK
x86_64: openscada-DAQ.DAQGate=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:27:39 :: [x86_64] #100 openscada-DAQ.DAQGate: install check OK
i586: openscada-DAQ.DAQGate=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:27:41 :: [i586] #100 openscada-DAQ.DAQGate: install check OK
x86_64: openscada-DAQ.DCON=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:27:48 :: [x86_64] #100 openscada-DAQ.DCON: install check OK
i586: openscada-DAQ.DCON=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:27:51 :: [i586] #100 openscada-DAQ.DCON: install check OK
x86_64: openscada-DAQ.JavaLikeCalc=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:27:58 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc: install check OK
i586: openscada-DAQ.DiamondBoards=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:28:00 :: [i586] #100 openscada-DAQ.DiamondBoards: install check OK
x86_64: openscada-DAQ.LogicLev=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:28:07 :: [x86_64] #100 openscada-DAQ.LogicLev: install check OK
i586: openscada-DAQ.ICP_DAS=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:28:10 :: [i586] #100 openscada-DAQ.ICP_DAS: install check OK
x86_64: openscada-DAQ.ModBus=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:28:17 :: [x86_64] #100 openscada-DAQ.ModBus: install check OK
i586: openscada-DAQ.JavaLikeCalc=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:28:20 :: [i586] #100 openscada-DAQ.JavaLikeCalc: install check OK
x86_64: openscada-DAQ.OPC_UA=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:28:27 :: [x86_64] #100 openscada-DAQ.OPC_UA: install check OK
i586: openscada-DAQ.LogicLev=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:28:29 :: [i586] #100 openscada-DAQ.LogicLev: install check OK
x86_64: openscada-DAQ.SNMP=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:28:36 :: [x86_64] #100 openscada-DAQ.SNMP: install check OK
i586: openscada-DAQ.ModBus=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:28:39 :: [i586] #100 openscada-DAQ.ModBus: install check OK
x86_64: openscada-DAQ.Siemens=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:28:46 :: [x86_64] #100 openscada-DAQ.Siemens: install check OK
i586: openscada-DAQ.OPC_UA=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:28:49 :: [i586] #100 openscada-DAQ.OPC_UA: install check OK
x86_64: openscada-DAQ.SoundCard=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:28:56 :: [x86_64] #100 openscada-DAQ.SoundCard: install check OK
i586: openscada-DAQ.SNMP=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:28:59 :: [i586] #100 openscada-DAQ.SNMP: install check OK
x86_64: openscada-DAQ.System=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:29:06 :: [x86_64] #100 openscada-DAQ.System: install check OK
i586: openscada-DAQ.Siemens=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:29:09 :: [i586] #100 openscada-DAQ.Siemens: install check OK
x86_64: openscada-DB.DBF=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:29:16 :: [x86_64] #100 openscada-DB.DBF: install check OK
i586: openscada-DAQ.SoundCard=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:29:20 :: [i586] #100 openscada-DAQ.SoundCard: install check OK
x86_64: openscada-DB.FireBird=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:29:25 :: [x86_64] #100 openscada-DB.FireBird: install check OK
i586: openscada-DAQ.System=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:29:29 :: [i586] #100 openscada-DAQ.System: install check OK
x86_64: openscada-DB.MySQL=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:29:35 :: [x86_64] #100 openscada-DB.MySQL: install check OK
i586: openscada-DB.DBF=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:29:39 :: [i586] #100 openscada-DB.DBF: install check OK
x86_64: openscada-DB.PostgreSQL=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:29:46 :: [x86_64] #100 openscada-DB.PostgreSQL: install check OK
i586: openscada-DB.FireBird=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:29:49 :: [i586] #100 openscada-DB.FireBird: install check OK
x86_64: openscada-DB.SQLite=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:29:55 :: [x86_64] #100 openscada-DB.SQLite: install check OK
i586: openscada-DB.MySQL=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:30:00 :: [i586] #100 openscada-DB.MySQL: install check OK
x86_64: openscada-LibDB.Main=0.8.13-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2015-May-28 19:30:05 :: [x86_64] #100 openscada-LibDB.Main: install check OK
i586: openscada-DB.PostgreSQL=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:30:10 :: [i586] #100 openscada-DB.PostgreSQL: install check OK
x86_64: openscada-LibDB.VCA=0.8.13-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2015-May-28 19:30:15 :: [x86_64] #100 openscada-LibDB.VCA: install check OK
i586: openscada-DB.SQLite=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:30:20 :: [i586] #100 openscada-DB.SQLite: install check OK
i586: openscada-LibDB.Main=0.8.13-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
x86_64: openscada-Model.AGLKS=0.8.13-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2015-May-28 19:30:30 :: [i586] #100 openscada-LibDB.Main: install check OK
2015-May-28 19:30:30 :: [x86_64] #100 openscada-Model.AGLKS: install check OK
i586: openscada-LibDB.VCA=0.8.13-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2015-May-28 19:30:40 :: [i586] #100 openscada-LibDB.VCA: install check OK
x86_64: openscada-Model.Boiler=0.8.13-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2015-May-28 19:30:44 :: [x86_64] #100 openscada-Model.Boiler: install check OK
x86_64: openscada-Protocol.HTTP=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:30:54 :: [x86_64] #100 openscada-Protocol.HTTP: install check OK
i586: openscada-Model.AGLKS=0.8.13-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2015-May-28 19:30:56 :: [i586] #100 openscada-Model.AGLKS: install check OK
x86_64: openscada-Protocol.SelfSystem=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:31:04 :: [x86_64] #100 openscada-Protocol.SelfSystem: install check OK
i586: openscada-Model.Boiler=0.8.13-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2015-May-28 19:31:11 :: [i586] #100 openscada-Model.Boiler: install check OK
x86_64: openscada-Protocol.UserProtocol=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:31:13 :: [x86_64] #100 openscada-Protocol.UserProtocol: install check OK
i586: openscada-Protocol.HTTP=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:31:21 :: [i586] #100 openscada-Protocol.HTTP: install check OK
x86_64: openscada-Special.FLibComplex1=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:31:22 :: [x86_64] #100 openscada-Special.FLibComplex1: install check OK
i586: openscada-Protocol.SelfSystem=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:31:31 :: [i586] #100 openscada-Protocol.SelfSystem: install check OK
x86_64: openscada-Special.FLibMath=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:31:32 :: [x86_64] #100 openscada-Special.FLibMath: install check OK
i586: openscada-Protocol.UserProtocol=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:31:41 :: [i586] #100 openscada-Protocol.UserProtocol: install check OK
x86_64: openscada-Special.FLibSYS=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:31:42 :: [x86_64] #100 openscada-Special.FLibSYS: install check OK
i586: openscada-Special.FLibComplex1=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:31:50 :: [i586] #100 openscada-Special.FLibComplex1: install check OK
x86_64: openscada-Special.SystemTests=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:31:51 :: [x86_64] #100 openscada-Special.SystemTests: install check OK
i586: openscada-Special.FLibMath=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:32:00 :: [i586] #100 openscada-Special.FLibMath: install check OK
x86_64: openscada-Transport.SSL=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:32:01 :: [x86_64] #100 openscada-Transport.SSL: install check OK
i586: openscada-Special.FLibSYS=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:32:10 :: [i586] #100 openscada-Special.FLibSYS: install check OK
x86_64: openscada-Transport.Serial=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:32:11 :: [x86_64] #100 openscada-Transport.Serial: install check OK
i586: openscada-Special.SystemTests=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:32:20 :: [i586] #100 openscada-Special.SystemTests: install check OK
x86_64: openscada-Transport.Sockets=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:32:21 :: [x86_64] #100 openscada-Transport.Sockets: install check OK
i586: openscada-Transport.SSL=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:32:30 :: [i586] #100 openscada-Transport.SSL: install check OK
2015-May-28 19:32:34 :: [x86_64] #100 openscada-UI.QTCfg: install check OK
i586: openscada-Transport.Serial=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:32:40 :: [i586] #100 openscada-Transport.Serial: install check OK
x86_64: openscada-UI.QTStarter=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:32:47 :: [x86_64] #100 openscada-UI.QTStarter: install check OK
i586: openscada-Transport.Sockets=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:32:50 :: [i586] #100 openscada-Transport.Sockets: install check OK
x86_64: openscada-UI.VCAEngine=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2015-May-28 19:32:57 :: [x86_64] #100 openscada-UI.VCAEngine: install check OK
2015-May-28 19:33:03 :: [i586] #100 openscada-UI.QTCfg: install check OK
2015-May-28 19:33:10 :: [x86_64] #100 openscada-UI.Vision: install check OK
i586: openscada-UI.QTStarter=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:33:17 :: [i586] #100 openscada-UI.QTStarter: install check OK
2015-May-28 19:33:20 :: [x86_64] #100 openscada-UI.WebCfg: install check OK
i586: openscada-UI.VCAEngine=0.8.13-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2015-May-28 19:33:27 :: [i586] #100 openscada-UI.VCAEngine: install check OK
2015-May-28 19:33:32 :: [x86_64] #100 openscada-UI.WebCfgD: install check OK
2015-May-28 19:33:41 :: [i586] #100 openscada-UI.Vision: install check OK
2015-May-28 19:33:42 :: [x86_64] #100 openscada-UI.WebUser: install check OK
2015-May-28 19:33:51 :: [i586] #100 openscada-UI.WebCfg: install check OK
2015-May-28 19:33:54 :: [x86_64] #100 openscada-UI.WebVision: install check OK
x86_64: openscada-core=0.8.13-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2015-May-28 19:34:03 :: [i586] #100 openscada-UI.WebCfgD: install check OK
2015-May-28 19:34:03 :: [x86_64] #100 openscada-core: install check OK
x86_64: openscada-devel=0.8.13-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2015-May-28 19:34:13 :: [i586] #100 openscada-UI.WebUser: install check OK
2015-May-28 19:34:13 :: [x86_64] #100 openscada-devel: install check OK
2015-May-28 19:34:25 :: [i586] #100 openscada-UI.WebVision: install check OK
2015-May-28 19:34:27 :: [x86_64] #100 openscada-docEN: install check OK
i586: openscada-core=0.8.13-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2015-May-28 19:34:35 :: [i586] #100 openscada-core: install check OK
2015-May-28 19:34:42 :: [x86_64] #100 openscada-docRU: install check OK
i586: openscada-devel=0.8.13-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2015-May-28 19:34:45 :: [i586] #100 openscada-devel: install check OK
2015-May-28 19:34:51 :: [x86_64] #100 openscada-docUK: install check OK
2015-May-28 19:35:01 :: [i586] #100 openscada-docEN: install check OK
2015-May-28 19:35:04 :: [x86_64] #100 openscada-plc: install check OK
2015-May-28 19:35:18 :: [x86_64] #100 openscada-server: install check OK
2015-May-28 19:35:18 :: [i586] #100 openscada-docRU: install check OK
2015-May-28 19:35:27 :: [i586] #100 openscada-docUK: install check OK
2015-May-28 19:35:33 :: [x86_64] #100 openscada-visStation: install check OK
2015-May-28 19:35:40 :: [i586] #100 openscada-plc: install check OK
2015-May-28 19:35:55 :: [i586] #100 openscada-server: install check OK
2015-May-28 19:36:11 :: [i586] #100 openscada-visStation: install check OK
2015-May-28 19:36:12 :: gears inheritance check OK
2015-May-28 19:36:13 :: srpm inheritance check OK
girar-check-perms: access to openscada ALLOWED for rom_as: project leader
2015-May-28 19:36:13 :: acl check OK
2015-May-28 19:36:34 :: created contents_index files
2015-May-28 19:36:37 :: created hash files: i586 noarch src x86_64
2015-May-28 19:36:39 :: task #144854 for 5.1 TESTED
2015-May-28 19:36:39 :: task is ready for commit
2015-May-28 19:37:09 :: repo clone OK
2015-May-28 19:37:19 :: packages update OK
2015-May-28 19:37:21 :: [i586 x86_64 noarch] update OK
2015-May-28 19:37:21 :: repo update OK
2015-May-28 19:37:25 :: repo save OK
2015-May-28 19:37:38 :: updated /gears/o/openscada.git branch `5.1'
2015-May-28 19:38:10 :: gears update OK
2015-May-28 19:38:10 :: task #144854 for 5.1 DONE
reply other threads:[~2015-05-28 19:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150528193811.GA19576@gitery.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=rom_as@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git