From: Girar Builder robot <girar-builder@altlinux.org>
To: "Eugeny A. Rostovtsev" <real@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org
Subject: [#85769] FAILED srpm=powersave-0.15.20-alt3.1.src.rpm
Date: Sun, 9 Dec 2012 14:20:29 +0000
Message-ID: <20121209142028.GA14267@ssh.git.altlinux.org> (raw)
http://git.altlinux.org/tasks/85769/logs/events.1.1.log
2012-Dec-09 14:16:19 :: task #85769 for sisyphus started by real:
#100 build powersave-0.15.20-alt3.1.src.rpm
2012-Dec-09 14:16:19 :: [i586] #100 powersave-0.15.20-alt3.1.src.rpm: build start
2012-Dec-09 14:16:19 :: [x86_64] #100 powersave-0.15.20-alt3.1.src.rpm: build start
build/100/x86_64/log:debuginfo.req: WARNING: /usr/lib64/liblazy.so.1 is not yet debuginfo-enabled
build/100/x86_64/log:debuginfo.req: WARNING: /usr/lib64/liblazy.so.1 is not yet debuginfo-enabled
2012-Dec-09 14:17:39 :: [x86_64] #100 powersave-0.15.20-alt3.1.src.rpm: build OK
build/100/i586/log:debuginfo.req: WARNING: /usr/lib/liblazy.so.1 is not yet debuginfo-enabled
build/100/i586/log:debuginfo.req: WARNING: /usr/lib/liblazy.so.1 is not yet debuginfo-enabled
2012-Dec-09 14:17:42 :: [i586] #100 powersave-0.15.20-alt3.1.src.rpm: build OK
2012-Dec-09 14:17:47 :: build check OK
2012-Dec-09 14:17:48 :: noarch check OK
2012-Dec-09 14:17:49 :: plan: src +1 -1 =13889, i586 +5 -3 =24693, x86_64 +5 -3 =24593
2012-Dec-09 14:17:49 :: version check OK
2012-Dec-09 14:18:37 :: created next repo
2012-Dec-09 14:18:52 :: dependencies check OK
2012-Dec-09 14:19:11 :: ELF symbols check OK
2012-Dec-09 14:19:28 :: [x86_64] #100 libpowersave: install check OK
2012-Dec-09 14:19:28 :: [i586] #100 libpowersave: install check OK
2012-Dec-09 14:19:43 :: [x86_64] #100 libpowersave-debuginfo: install check OK
2012-Dec-09 14:19:43 :: [i586] #100 libpowersave-debuginfo: install check OK
2012-Dec-09 14:19:57 :: [x86_64] #100 libpowersave-devel: install check OK
2012-Dec-09 14:19:57 :: [i586] #100 libpowersave-devel: install check OK
x86_64: powersave=0.15.20-alt3.1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark powersave
MI2a: target hal
MI2a: mark hal
Starting
Starting 2
Investigating udev
Package udev has broken dep on hal
Considering hal 2 as a solution to udev 4
Re-Instated hal
Added hal to the remove list
Fixing udev via keep of hal
Investigating powersave
Package powersave has broken dep on hal
Considering hal 2 as a solution to powersave 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
powersave: PreDepends: hal (>= 0.5.4-alt6)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2012-Dec-09 14:20:11 :: [x86_64] #100 powersave: install check FAILED
i586: powersave=0.15.20-alt3.1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark powersave
MI2a: target hal
MI2a: mark hal
Starting
Starting 2
Investigating udev
Package udev has broken dep on hal
Considering hal 2 as a solution to udev 4
Re-Instated hal
Added hal to the remove list
Fixing udev via keep of hal
Investigating powersave
Package powersave has broken dep on hal
Considering hal 2 as a solution to powersave 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
powersave: PreDepends: hal (>= 0.5.4-alt6)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2012-Dec-09 14:20:12 :: [i586] #100 powersave: install check FAILED
x86_64: powersave-debuginfo=0.15.20-alt3.1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark powersave-debuginfo
MI2a: target powersave
MI2a: mark powersave
MI2a: target hal
MI2a: mark hal
MI2a: target udev
MI2a: mark udev
MI2a: target dmsetup
MI2a: mark dmsetup
MI2a: delete hal
Starting
Starting 2
Investigating powersave
Package powersave has broken dep on hal
Considering hal 1 as a solution to powersave 2
Holding Back powersave rather than change hal
Investigating powersave-debuginfo
Package powersave-debuginfo has broken dep on powersave
Considering powersave 2 as a solution to powersave-debuginfo 9999
Re-Instated hal
Re-Instated powersave
Investigating udev
Package udev has broken dep on hal
Considering hal 1 as a solution to udev 0
Holding Back udev rather than change hal
Investigating hal
Package hal has broken dep on udev
Considering udev 0 as a solution to hal 1
Holding Back hal rather than change udev
Investigating dmsetup
Package dmsetup has broken dep on udev
Considering udev 0 as a solution to dmsetup 0
Holding Back dmsetup rather than change udev
Investigating powersave
Package powersave has broken dep on hal
Considering hal 1 as a solution to powersave 2
Holding Back powersave rather than change hal
Investigating powersave-debuginfo
Package powersave-debuginfo has broken dep on powersave
Considering powersave 2 as a solution to powersave-debuginfo 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
powersave-debuginfo: Depends: powersave (= 0.15.20-alt3.1)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2012-Dec-09 14:20:27 :: [x86_64] #100 powersave-debuginfo: install check FAILED
i586: powersave-debuginfo=0.15.20-alt3.1 install failed:
Reading Package Lists...
Building Dependency Tree...
MI2a: mark powersave-debuginfo
MI2a: target powersave
MI2a: mark powersave
MI2a: target hal
MI2a: mark hal
MI2a: target udev
MI2a: mark udev
MI2a: target dmsetup
MI2a: mark dmsetup
MI2a: delete hal
Starting
Starting 2
Investigating powersave
Package powersave has broken dep on hal
Considering hal 1 as a solution to powersave 2
Holding Back powersave rather than change hal
Investigating powersave-debuginfo
Package powersave-debuginfo has broken dep on powersave
Considering powersave 2 as a solution to powersave-debuginfo 9999
Re-Instated hal
Re-Instated powersave
Investigating udev
Package udev has broken dep on hal
Considering hal 1 as a solution to udev 0
Holding Back udev rather than change hal
Investigating hal
Package hal has broken dep on udev
Considering udev 0 as a solution to hal 1
Holding Back hal rather than change udev
Investigating dmsetup
Package dmsetup has broken dep on udev
Considering udev 0 as a solution to dmsetup 0
Holding Back dmsetup rather than change udev
Investigating powersave
Package powersave has broken dep on hal
Considering hal 1 as a solution to powersave 2
Holding Back powersave rather than change hal
Investigating powersave-debuginfo
Package powersave-debuginfo has broken dep on powersave
Considering powersave 2 as a solution to powersave-debuginfo 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
powersave-debuginfo: Depends: powersave (= 0.15.20-alt3.1)
E: Broken packages
hsh-install: Failed to calculate package file list.
hsh-install: Failed to generate package file list.
2012-Dec-09 14:20:28 :: [i586] #100 powersave-debuginfo: install check FAILED
2012-Dec-09 14:20:27 :: [x86_64] install check FAILED
2012-Dec-09 14:20:28 :: [i586] install check FAILED
2012-Dec-09 14:20:28 :: task #85769 for sisyphus FAILED
reply other threads:[~2012-12-09 14:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121209142028.GA14267@ssh.git.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=real@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git