From: Girar Builder robot <girar-builder@altlinux.org>
To: Roman Savochenko <rom_as@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org
Subject: [#84345] 5.1 DONE openscada.git=0.8.0.4-alt0.M51.1
Date: Tue, 13 Nov 2012 19:04:03 +0000
Message-ID: <20121113190403.GA23789@ssh.git.altlinux.org> (raw)
http://git.altlinux.org/tasks/archive/done/_82/84345/logs/events.1.1.log
2012-Nov-13 18:26:53 :: task #84345 for 5.1 started by rom_as:
#100 build 0.8.0.4-alt0.M51.1 from /people/rom_as/packages/openscada.git
2012-Nov-13 18:26:54 :: [i586] #100 openscada.git 0.8.0.4-alt0.M51.1: build start
2012-Nov-13 18:26:54 :: [x86_64] #100 openscada.git 0.8.0.4-alt0.M51.1: build start
2012-Nov-13 18:42:14 :: [x86_64] #100 openscada.git 0.8.0.4-alt0.M51.1: build OK
2012-Nov-13 18:43:23 :: [i586] #100 openscada.git 0.8.0.4-alt0.M51.1: build OK
2012-Nov-13 18:43:52 :: build check OK
2012-Nov-13 18:44:18 :: noarch check OK
2012-Nov-13 18:44:19 :: plan: src +1 -1 =9773, i586 +44 -44 =12194, noarch +8 -8 =8269, x86_64 +42 -42 =12034
2012-Nov-13 18:44:19 :: version check OK
2012-Nov-13 18:45:43 :: created next repo
2012-Nov-13 18:45:46 :: dependencies check OK
2012-Nov-13 18:49:07 :: ELF symbols check OK
2012-Nov-13 18:49:29 :: [x86_64] #100 openscada: install check OK
2012-Nov-13 18:49:31 :: [i586] #100 openscada: install check OK
x86_64: openscada-Archive.DBArch=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:49:45 :: [x86_64] #100 openscada-Archive.DBArch: install check OK
i586: openscada-Archive.DBArch=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:49:47 :: [i586] #100 openscada-Archive.DBArch: install check OK
x86_64: openscada-Archive.FSArch=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:50:00 :: [x86_64] #100 openscada-Archive.FSArch: install check OK
i586: openscada-Archive.FSArch=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:50:03 :: [i586] #100 openscada-Archive.FSArch: install check OK
x86_64: openscada-DAQ.BFN=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:50:15 :: [x86_64] #100 openscada-DAQ.BFN: install check OK
i586: openscada-DAQ.BFN=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:50:19 :: [i586] #100 openscada-DAQ.BFN: install check OK
x86_64: openscada-DAQ.BlockCalc=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:50:29 :: [x86_64] #100 openscada-DAQ.BlockCalc: install check OK
i586: openscada-DAQ.BlockCalc=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:50:34 :: [i586] #100 openscada-DAQ.BlockCalc: install check OK
x86_64: openscada-DAQ.DAQGate=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:50:45 :: [x86_64] #100 openscada-DAQ.DAQGate: install check OK
i586: openscada-DAQ.DAQGate=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:50:50 :: [i586] #100 openscada-DAQ.DAQGate: install check OK
x86_64: openscada-DAQ.DCON=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:51:00 :: [x86_64] #100 openscada-DAQ.DCON: install check OK
i586: openscada-DAQ.DCON=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:51:05 :: [i586] #100 openscada-DAQ.DCON: install check OK
x86_64: openscada-DAQ.JavaLikeCalc=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:51:16 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc: install check OK
i586: openscada-DAQ.DiamondBoards=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:51:21 :: [i586] #100 openscada-DAQ.DiamondBoards: install check OK
x86_64: openscada-DAQ.LogicLev=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:51:31 :: [x86_64] #100 openscada-DAQ.LogicLev: install check OK
i586: openscada-DAQ.ICP_DAS=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:51:37 :: [i586] #100 openscada-DAQ.ICP_DAS: install check OK
x86_64: openscada-DAQ.ModBus=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:51:45 :: [x86_64] #100 openscada-DAQ.ModBus: install check OK
i586: openscada-DAQ.JavaLikeCalc=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:51:53 :: [i586] #100 openscada-DAQ.JavaLikeCalc: install check OK
x86_64: openscada-DAQ.OPC_UA=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:52:00 :: [x86_64] #100 openscada-DAQ.OPC_UA: install check OK
i586: openscada-DAQ.LogicLev=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:52:09 :: [i586] #100 openscada-DAQ.LogicLev: install check OK
x86_64: openscada-DAQ.SNMP=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:52:15 :: [x86_64] #100 openscada-DAQ.SNMP: install check OK
i586: openscada-DAQ.ModBus=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:52:25 :: [i586] #100 openscada-DAQ.ModBus: install check OK
x86_64: openscada-DAQ.Siemens=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:52:31 :: [x86_64] #100 openscada-DAQ.Siemens: install check OK
i586: openscada-DAQ.OPC_UA=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:52:41 :: [i586] #100 openscada-DAQ.OPC_UA: install check OK
x86_64: openscada-DAQ.SoundCard=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:52:46 :: [x86_64] #100 openscada-DAQ.SoundCard: install check OK
i586: openscada-DAQ.SNMP=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:52:57 :: [i586] #100 openscada-DAQ.SNMP: install check OK
x86_64: openscada-DAQ.System=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:53:02 :: [x86_64] #100 openscada-DAQ.System: install check OK
i586: openscada-DAQ.Siemens=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:53:13 :: [i586] #100 openscada-DAQ.Siemens: install check OK
x86_64: openscada-DB.DBF=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:53:17 :: [x86_64] #100 openscada-DB.DBF: install check OK
i586: openscada-DAQ.SoundCard=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:53:29 :: [i586] #100 openscada-DAQ.SoundCard: install check OK
x86_64: openscada-DB.FireBird=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:53:31 :: [x86_64] #100 openscada-DB.FireBird: install check OK
i586: openscada-DAQ.System=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:53:44 :: [i586] #100 openscada-DAQ.System: install check OK
x86_64: openscada-DB.MySQL=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:53:46 :: [x86_64] #100 openscada-DB.MySQL: install check OK
i586: openscada-DB.DBF=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:54:00 :: [i586] #100 openscada-DB.DBF: install check OK
x86_64: openscada-DB.PostgreSQL=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:54:02 :: [x86_64] #100 openscada-DB.PostgreSQL: install check OK
i586: openscada-DB.FireBird=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:54:17 :: [i586] #100 openscada-DB.FireBird: install check OK
x86_64: openscada-DB.SQLite=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:54:18 :: [x86_64] #100 openscada-DB.SQLite: install check OK
i586: openscada-DB.MySQL=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:54:32 :: [i586] #100 openscada-DB.MySQL: install check OK
x86_64: openscada-LibDB.Main=0.8.0.4-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2012-Nov-13 18:54:34 :: [x86_64] #100 openscada-LibDB.Main: install check OK
i586: openscada-DB.PostgreSQL=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:54:48 :: [i586] #100 openscada-DB.PostgreSQL: install check OK
x86_64: openscada-LibDB.VCA=0.8.0.4-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2012-Nov-13 18:54:50 :: [x86_64] #100 openscada-LibDB.VCA: install check OK
i586: openscada-DB.SQLite=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:55:04 :: [i586] #100 openscada-DB.SQLite: install check OK
x86_64: openscada-Model.AGLKS=0.8.0.4-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2012-Nov-13 18:55:07 :: [x86_64] #100 openscada-Model.AGLKS: install check OK
i586: openscada-LibDB.Main=0.8.0.4-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2012-Nov-13 18:55:20 :: [i586] #100 openscada-LibDB.Main: install check OK
x86_64: openscada-Model.Boiler=0.8.0.4-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2012-Nov-13 18:55:25 :: [x86_64] #100 openscada-Model.Boiler: install check OK
i586: openscada-LibDB.VCA=0.8.0.4-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2012-Nov-13 18:55:36 :: [i586] #100 openscada-LibDB.VCA: install check OK
x86_64: openscada-Protocol.HTTP=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:55:41 :: [x86_64] #100 openscada-Protocol.HTTP: install check OK
i586: openscada-Model.AGLKS=0.8.0.4-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2012-Nov-13 18:55:55 :: [i586] #100 openscada-Model.AGLKS: install check OK
x86_64: openscada-Protocol.SelfSystem=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:55:56 :: [x86_64] #100 openscada-Protocol.SelfSystem: install check OK
x86_64: openscada-Protocol.UserProtocol=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
i586: openscada-Model.Boiler=0.8.0.4-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2012-Nov-13 18:56:12 :: [x86_64] #100 openscada-Protocol.UserProtocol: install check OK
2012-Nov-13 18:56:12 :: [i586] #100 openscada-Model.Boiler: install check OK
x86_64: openscada-Special.FLibComplex1=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
i586: openscada-Protocol.HTTP=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:56:27 :: [x86_64] #100 openscada-Special.FLibComplex1: install check OK
2012-Nov-13 18:56:27 :: [i586] #100 openscada-Protocol.HTTP: install check OK
x86_64: openscada-Special.FLibMath=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:56:41 :: [x86_64] #100 openscada-Special.FLibMath: install check OK
i586: openscada-Protocol.SelfSystem=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:56:43 :: [i586] #100 openscada-Protocol.SelfSystem: install check OK
x86_64: openscada-Special.FLibSYS=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:56:56 :: [x86_64] #100 openscada-Special.FLibSYS: install check OK
i586: openscada-Protocol.UserProtocol=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:56:58 :: [i586] #100 openscada-Protocol.UserProtocol: install check OK
x86_64: openscada-Special.SystemTests=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:57:12 :: [x86_64] #100 openscada-Special.SystemTests: install check OK
i586: openscada-Special.FLibComplex1=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:57:13 :: [i586] #100 openscada-Special.FLibComplex1: install check OK
x86_64: openscada-Transport.SSL=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:57:27 :: [x86_64] #100 openscada-Transport.SSL: install check OK
i586: openscada-Special.FLibMath=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:57:29 :: [i586] #100 openscada-Special.FLibMath: install check OK
x86_64: openscada-Transport.Serial=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:57:43 :: [x86_64] #100 openscada-Transport.Serial: install check OK
i586: openscada-Special.FLibSYS=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:57:46 :: [i586] #100 openscada-Special.FLibSYS: install check OK
x86_64: openscada-Transport.Sockets=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:57:58 :: [x86_64] #100 openscada-Transport.Sockets: install check OK
i586: openscada-Special.SystemTests=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:58:01 :: [i586] #100 openscada-Special.SystemTests: install check OK
2012-Nov-13 18:58:14 :: [x86_64] #100 openscada-UI.QTCfg: install check OK
i586: openscada-Transport.SSL=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:58:17 :: [i586] #100 openscada-Transport.SSL: install check OK
x86_64: openscada-UI.QTStarter=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
i586: openscada-Transport.Serial=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:58:32 :: [x86_64] #100 openscada-UI.QTStarter: install check OK
2012-Nov-13 18:58:32 :: [i586] #100 openscada-Transport.Serial: install check OK
x86_64: openscada-UI.VCAEngine=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
i586: openscada-Transport.Sockets=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:58:47 :: [x86_64] #100 openscada-UI.VCAEngine: install check OK
2012-Nov-13 18:58:48 :: [i586] #100 openscada-Transport.Sockets: install check OK
2012-Nov-13 18:59:05 :: [x86_64] #100 openscada-UI.Vision: install check OK
2012-Nov-13 18:59:05 :: [i586] #100 openscada-UI.QTCfg: install check OK
2012-Nov-13 18:59:21 :: [x86_64] #100 openscada-UI.WebCfg: install check OK
i586: openscada-UI.QTStarter=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:59:22 :: [i586] #100 openscada-UI.QTStarter: install check OK
2012-Nov-13 18:59:36 :: [x86_64] #100 openscada-UI.WebCfgD: install check OK
i586: openscada-UI.VCAEngine=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:59:37 :: [i586] #100 openscada-UI.VCAEngine: install check OK
2012-Nov-13 18:59:50 :: [x86_64] #100 openscada-UI.WebUser: install check OK
2012-Nov-13 18:59:54 :: [i586] #100 openscada-UI.Vision: install check OK
2012-Nov-13 19:00:05 :: [x86_64] #100 openscada-UI.WebVision: install check OK
2012-Nov-13 19:00:10 :: [i586] #100 openscada-UI.WebCfg: install check OK
x86_64: openscada-core=0.8.0.4-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2012-Nov-13 19:00:20 :: [x86_64] #100 openscada-core: install check OK
2012-Nov-13 19:00:26 :: [i586] #100 openscada-UI.WebCfgD: install check OK
x86_64: openscada-devel=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2012-Nov-13 19:00:36 :: [x86_64] #100 openscada-devel: install check OK
2012-Nov-13 19:00:42 :: [i586] #100 openscada-UI.WebUser: install check OK
2012-Nov-13 19:00:53 :: [x86_64] #100 openscada-docEN: install check OK
2012-Nov-13 19:00:58 :: [i586] #100 openscada-UI.WebVision: install check OK
2012-Nov-13 19:01:10 :: [x86_64] #100 openscada-docRU: install check OK
i586: openscada-core=0.8.0.4-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2012-Nov-13 19:01:13 :: [i586] #100 openscada-core: install check OK
2012-Nov-13 19:01:20 :: [x86_64] #100 openscada-docUK: install check OK
i586: openscada-devel=0.8.0.4-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2012-Nov-13 19:01:30 :: [i586] #100 openscada-devel: install check OK
2012-Nov-13 19:01:35 :: [x86_64] #100 openscada-plc: install check OK
2012-Nov-13 19:01:48 :: [i586] #100 openscada-docEN: install check OK
2012-Nov-13 19:01:53 :: [x86_64] #100 openscada-server: install check OK
2012-Nov-13 19:02:08 :: [i586] #100 openscada-docRU: install check OK
2012-Nov-13 19:02:10 :: [x86_64] #100 openscada-visStation: install check OK
2012-Nov-13 19:02:19 :: [i586] #100 openscada-docUK: install check OK
2012-Nov-13 19:02:36 :: [i586] #100 openscada-plc: install check OK
2012-Nov-13 19:02:53 :: [i586] #100 openscada-server: install check OK
2012-Nov-13 19:03:12 :: [i586] #100 openscada-visStation: install check OK
2012-Nov-13 19:03:12 :: gears inheritance check OK
2012-Nov-13 19:03:12 :: srpm inheritance check OK
girar-check-perms: access to openscada ALLOWED for rom_as: project leader
2012-Nov-13 19:03:12 :: acl check OK
2012-Nov-13 19:03:24 :: created contents_index files
2012-Nov-13 19:03:25 :: task #84345 for 5.1 TESTED
2012-Nov-13 19:03:25 :: task is ready for commit
2012-Nov-13 19:03:38 :: repo clone OK
2012-Nov-13 19:03:45 :: packages update OK
2012-Nov-13 19:03:47 :: [i586 x86_64 noarch] update OK
2012-Nov-13 19:03:50 :: repo update OK
2012-Nov-13 19:03:53 :: repo save OK
2012-Nov-13 19:03:53 :: updated /gears/o/openscada.git branch `5.1'
2012-Nov-13 19:04:03 :: gears update OK
2012-Nov-13 19:04:03 :: task #84345 for 5.1 DONE
reply other threads:[~2012-11-13 19:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121113190403.GA23789@ssh.git.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=rom_as@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git