From: Girar Builder robot <girar-builder@altlinux.org>
To: Roman Savochenko <rom_as@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org
Subject: [#79441] 5.1 DONE openscada.git=0.8.0.3-alt0.M51.1
Date: Sat, 8 Sep 2012 23:31:20 +0000
Message-ID: <20120908233120.GA21952@ssh.git.altlinux.org> (raw)
http://git.altlinux.org/tasks/archive/done/_77/79441/logs/events.1.1.log
2012-Sep-08 22:52:43 :: task #79441 for 5.1 started by rom_as:
#100 build 0.8.0.3-alt0.M51.1 from /people/rom_as/packages/openscada.git
2012-Sep-08 22:52:43 :: [i586] #100 openscada.git 0.8.0.3-alt0.M51.1: build start
2012-Sep-08 22:52:43 :: [x86_64] #100 openscada.git 0.8.0.3-alt0.M51.1: build start
2012-Sep-08 23:08:18 :: [x86_64] #100 openscada.git 0.8.0.3-alt0.M51.1: build OK
2012-Sep-08 23:09:49 :: [i586] #100 openscada.git 0.8.0.3-alt0.M51.1: build OK
2012-Sep-08 23:10:19 :: build check OK
2012-Sep-08 23:10:45 :: noarch check OK
2012-Sep-08 23:10:46 :: plan: src +1 -1 =9773, i586 +44 -44 =12190, noarch +8 -8 =8273, x86_64 +42 -42 =12030
2012-Sep-08 23:10:46 :: version check OK
2012-Sep-08 23:12:10 :: created test repo
2012-Sep-08 23:12:14 :: dependencies check OK
2012-Sep-08 23:15:55 :: ELF symbols check OK
2012-Sep-08 23:16:18 :: [x86_64] #100 openscada: install check OK
2012-Sep-08 23:16:20 :: [i586] #100 openscada: install check OK
x86_64: openscada-Archive.DBArch=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:16:33 :: [x86_64] #100 openscada-Archive.DBArch: install check OK
i586: openscada-Archive.DBArch=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:16:37 :: [i586] #100 openscada-Archive.DBArch: install check OK
x86_64: openscada-Archive.FSArch=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:16:49 :: [x86_64] #100 openscada-Archive.FSArch: install check OK
i586: openscada-Archive.FSArch=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:16:54 :: [i586] #100 openscada-Archive.FSArch: install check OK
x86_64: openscada-DAQ.BFN=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:17:05 :: [x86_64] #100 openscada-DAQ.BFN: install check OK
i586: openscada-DAQ.BFN=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:17:11 :: [i586] #100 openscada-DAQ.BFN: install check OK
x86_64: openscada-DAQ.BlockCalc=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:17:21 :: [x86_64] #100 openscada-DAQ.BlockCalc: install check OK
i586: openscada-DAQ.BlockCalc=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:17:28 :: [i586] #100 openscada-DAQ.BlockCalc: install check OK
x86_64: openscada-DAQ.DAQGate=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:17:35 :: [x86_64] #100 openscada-DAQ.DAQGate: install check OK
i586: openscada-DAQ.DAQGate=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:17:46 :: [i586] #100 openscada-DAQ.DAQGate: install check OK
x86_64: openscada-DAQ.DCON=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:17:50 :: [x86_64] #100 openscada-DAQ.DCON: install check OK
i586: openscada-DAQ.DCON=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:18:02 :: [i586] #100 openscada-DAQ.DCON: install check OK
x86_64: openscada-DAQ.JavaLikeCalc=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:18:05 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc: install check OK
i586: openscada-DAQ.DiamondBoards=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:18:18 :: [i586] #100 openscada-DAQ.DiamondBoards: install check OK
x86_64: openscada-DAQ.LogicLev=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:18:20 :: [x86_64] #100 openscada-DAQ.LogicLev: install check OK
i586: openscada-DAQ.ICP_DAS=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:18:33 :: [i586] #100 openscada-DAQ.ICP_DAS: install check OK
x86_64: openscada-DAQ.ModBus=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:18:35 :: [x86_64] #100 openscada-DAQ.ModBus: install check OK
i586: openscada-DAQ.JavaLikeCalc=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
x86_64: openscada-DAQ.OPC_UA=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:18:49 :: [i586] #100 openscada-DAQ.JavaLikeCalc: install check OK
2012-Sep-08 23:18:50 :: [x86_64] #100 openscada-DAQ.OPC_UA: install check OK
x86_64: openscada-DAQ.SNMP=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
i586: openscada-DAQ.LogicLev=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:19:04 :: [x86_64] #100 openscada-DAQ.SNMP: install check OK
2012-Sep-08 23:19:05 :: [i586] #100 openscada-DAQ.LogicLev: install check OK
x86_64: openscada-DAQ.Siemens=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:19:19 :: [x86_64] #100 openscada-DAQ.Siemens: install check OK
i586: openscada-DAQ.ModBus=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:19:21 :: [i586] #100 openscada-DAQ.ModBus: install check OK
x86_64: openscada-DAQ.SoundCard=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:19:34 :: [x86_64] #100 openscada-DAQ.SoundCard: install check OK
i586: openscada-DAQ.OPC_UA=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:19:37 :: [i586] #100 openscada-DAQ.OPC_UA: install check OK
x86_64: openscada-DAQ.System=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:19:48 :: [x86_64] #100 openscada-DAQ.System: install check OK
i586: openscada-DAQ.SNMP=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:19:54 :: [i586] #100 openscada-DAQ.SNMP: install check OK
x86_64: openscada-DB.DBF=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:20:02 :: [x86_64] #100 openscada-DB.DBF: install check OK
i586: openscada-DAQ.Siemens=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:20:10 :: [i586] #100 openscada-DAQ.Siemens: install check OK
x86_64: openscada-DB.FireBird=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:20:17 :: [x86_64] #100 openscada-DB.FireBird: install check OK
i586: openscada-DAQ.SoundCard=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:20:27 :: [i586] #100 openscada-DAQ.SoundCard: install check OK
x86_64: openscada-DB.MySQL=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:20:32 :: [x86_64] #100 openscada-DB.MySQL: install check OK
i586: openscada-DAQ.System=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:20:44 :: [i586] #100 openscada-DAQ.System: install check OK
x86_64: openscada-DB.PostgreSQL=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:20:46 :: [x86_64] #100 openscada-DB.PostgreSQL: install check OK
i586: openscada-DB.DBF=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:21:00 :: [i586] #100 openscada-DB.DBF: install check OK
x86_64: openscada-DB.SQLite=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:21:01 :: [x86_64] #100 openscada-DB.SQLite: install check OK
i586: openscada-DB.FireBird=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
x86_64: openscada-LibDB.Main=0.8.0.3-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2012-Sep-08 23:21:16 :: [i586] #100 openscada-DB.FireBird: install check OK
2012-Sep-08 23:21:17 :: [x86_64] #100 openscada-LibDB.Main: install check OK
x86_64: openscada-LibDB.VCA=0.8.0.3-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
i586: openscada-DB.MySQL=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:21:32 :: [x86_64] #100 openscada-LibDB.VCA: install check OK
2012-Sep-08 23:21:33 :: [i586] #100 openscada-DB.MySQL: install check OK
x86_64: openscada-Model.AGLKS=0.8.0.3-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
i586: openscada-DB.PostgreSQL=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:21:48 :: [x86_64] #100 openscada-Model.AGLKS: install check OK
2012-Sep-08 23:21:49 :: [i586] #100 openscada-DB.PostgreSQL: install check OK
i586: openscada-DB.SQLite=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
x86_64: openscada-Model.Boiler=0.8.0.3-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2012-Sep-08 23:22:05 :: [i586] #100 openscada-DB.SQLite: install check OK
2012-Sep-08 23:22:06 :: [x86_64] #100 openscada-Model.Boiler: install check OK
x86_64: openscada-Protocol.HTTP=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
i586: openscada-LibDB.Main=0.8.0.3-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2012-Sep-08 23:22:20 :: [x86_64] #100 openscada-Protocol.HTTP: install check OK
2012-Sep-08 23:22:21 :: [i586] #100 openscada-LibDB.Main: install check OK
x86_64: openscada-Protocol.SelfSystem=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:22:35 :: [x86_64] #100 openscada-Protocol.SelfSystem: install check OK
i586: openscada-LibDB.VCA=0.8.0.3-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2012-Sep-08 23:22:38 :: [i586] #100 openscada-LibDB.VCA: install check OK
x86_64: openscada-Protocol.UserProtocol=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:22:49 :: [x86_64] #100 openscada-Protocol.UserProtocol: install check OK
i586: openscada-Model.AGLKS=0.8.0.3-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2012-Sep-08 23:22:57 :: [i586] #100 openscada-Model.AGLKS: install check OK
x86_64: openscada-Special.FLibComplex1=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:23:04 :: [x86_64] #100 openscada-Special.FLibComplex1: install check OK
i586: openscada-Model.Boiler=0.8.0.3-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2012-Sep-08 23:23:16 :: [i586] #100 openscada-Model.Boiler: install check OK
x86_64: openscada-Special.FLibMath=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:23:19 :: [x86_64] #100 openscada-Special.FLibMath: install check OK
i586: openscada-Protocol.HTTP=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:23:32 :: [i586] #100 openscada-Protocol.HTTP: install check OK
x86_64: openscada-Special.FLibSYS=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:23:33 :: [x86_64] #100 openscada-Special.FLibSYS: install check OK
x86_64: openscada-Special.SystemTests=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
i586: openscada-Protocol.SelfSystem=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:23:48 :: [x86_64] #100 openscada-Special.SystemTests: install check OK
2012-Sep-08 23:23:48 :: [i586] #100 openscada-Protocol.SelfSystem: install check OK
x86_64: openscada-Transport.SSL=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:24:03 :: [x86_64] #100 openscada-Transport.SSL: install check OK
i586: openscada-Protocol.UserProtocol=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:24:04 :: [i586] #100 openscada-Protocol.UserProtocol: install check OK
x86_64: openscada-Transport.Serial=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:24:17 :: [x86_64] #100 openscada-Transport.Serial: install check OK
i586: openscada-Special.FLibComplex1=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:24:21 :: [i586] #100 openscada-Special.FLibComplex1: install check OK
x86_64: openscada-Transport.Sockets=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:24:32 :: [x86_64] #100 openscada-Transport.Sockets: install check OK
i586: openscada-Special.FLibMath=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:24:37 :: [i586] #100 openscada-Special.FLibMath: install check OK
2012-Sep-08 23:24:48 :: [x86_64] #100 openscada-UI.QTCfg: install check OK
i586: openscada-Special.FLibSYS=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:24:52 :: [i586] #100 openscada-Special.FLibSYS: install check OK
x86_64: openscada-UI.QTStarter=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:25:03 :: [x86_64] #100 openscada-UI.QTStarter: install check OK
i586: openscada-Special.SystemTests=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:25:08 :: [i586] #100 openscada-Special.SystemTests: install check OK
x86_64: openscada-UI.VCAEngine=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2012-Sep-08 23:25:18 :: [x86_64] #100 openscada-UI.VCAEngine: install check OK
i586: openscada-Transport.SSL=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:25:24 :: [i586] #100 openscada-Transport.SSL: install check OK
2012-Sep-08 23:25:34 :: [x86_64] #100 openscada-UI.Vision: install check OK
i586: openscada-Transport.Serial=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:25:40 :: [i586] #100 openscada-Transport.Serial: install check OK
2012-Sep-08 23:25:48 :: [x86_64] #100 openscada-UI.WebCfg: install check OK
i586: openscada-Transport.Sockets=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:25:57 :: [i586] #100 openscada-Transport.Sockets: install check OK
2012-Sep-08 23:26:02 :: [x86_64] #100 openscada-UI.WebCfgD: install check OK
2012-Sep-08 23:26:15 :: [i586] #100 openscada-UI.QTCfg: install check OK
2012-Sep-08 23:26:17 :: [x86_64] #100 openscada-UI.WebUser: install check OK
2012-Sep-08 23:26:32 :: [x86_64] #100 openscada-UI.WebVision: install check OK
i586: openscada-UI.QTStarter=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:26:33 :: [i586] #100 openscada-UI.QTStarter: install check OK
x86_64: openscada-core=0.8.0.3-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2012-Sep-08 23:26:46 :: [x86_64] #100 openscada-core: install check OK
i586: openscada-UI.VCAEngine=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2012-Sep-08 23:26:49 :: [i586] #100 openscada-UI.VCAEngine: install check OK
x86_64: openscada-devel=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2012-Sep-08 23:27:01 :: [x86_64] #100 openscada-devel: install check OK
2012-Sep-08 23:27:07 :: [i586] #100 openscada-UI.Vision: install check OK
2012-Sep-08 23:27:17 :: [x86_64] #100 openscada-docEN: install check OK
2012-Sep-08 23:27:24 :: [i586] #100 openscada-UI.WebCfg: install check OK
2012-Sep-08 23:27:33 :: [x86_64] #100 openscada-docRU: install check OK
2012-Sep-08 23:27:40 :: [i586] #100 openscada-UI.WebCfgD: install check OK
2012-Sep-08 23:27:44 :: [x86_64] #100 openscada-docUK: install check OK
2012-Sep-08 23:27:56 :: [i586] #100 openscada-UI.WebUser: install check OK
2012-Sep-08 23:27:59 :: [x86_64] #100 openscada-plc: install check OK
2012-Sep-08 23:28:12 :: [i586] #100 openscada-UI.WebVision: install check OK
2012-Sep-08 23:28:16 :: [x86_64] #100 openscada-server: install check OK
i586: openscada-core=0.8.0.3-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2012-Sep-08 23:28:29 :: [i586] #100 openscada-core: install check OK
2012-Sep-08 23:28:33 :: [x86_64] #100 openscada-visStation: install check OK
i586: openscada-devel=0.8.0.3-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2012-Sep-08 23:28:45 :: [i586] #100 openscada-devel: install check OK
2012-Sep-08 23:29:05 :: [i586] #100 openscada-docEN: install check OK
2012-Sep-08 23:29:25 :: [i586] #100 openscada-docRU: install check OK
2012-Sep-08 23:29:37 :: [i586] #100 openscada-docUK: install check OK
2012-Sep-08 23:29:54 :: [i586] #100 openscada-plc: install check OK
2012-Sep-08 23:30:12 :: [i586] #100 openscada-server: install check OK
2012-Sep-08 23:30:32 :: [i586] #100 openscada-visStation: install check OK
2012-Sep-08 23:30:32 :: gears inheritance check OK
openscada-0.8.0.3-alt0.M51.1.src.rpm: missing last changelog entry from openscada-0.8.0.2-alt1.M51.1.src.rpm:
* Mon Jul 09 2012 rom_as@altlinux 0.8.0.2-alt1.M51.1
2012-Sep-09 23:30:32 :: srpm inheritance check COND-OK
girar-check-perms: access to openscada ALLOWED for rom_as: project leader
2012-Sep-08 23:30:32 :: acl check OK
2012-Sep-08 23:30:44 :: created contents_index files
2012-Sep-08 23:30:46 :: task #79441 for 5.1 TESTED
2012-Sep-08 23:30:47 :: task is ready for commit
2012-Sep-08 23:30:48 :: repo clone OK
2012-Sep-08 23:31:01 :: packages update OK
2012-Sep-08 23:31:04 :: [i586 x86_64 noarch] update OK
2012-Sep-08 23:31:07 :: repo update OK
2012-Sep-08 23:31:09 :: repo save OK
2012-Sep-08 23:31:11 :: updated /gears/o/openscada.git branch `5.1'
2012-Sep-08 23:31:19 :: gears update OK
2012-Sep-08 23:31:19 :: task #79441 for 5.1 DONE
reply other threads:[~2012-09-08 23:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120908233120.GA21952@ssh.git.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=rom_as@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git