From: girar-builder@altlinux.org
To: Alexey Shabalin <shaba@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org
Subject: [#32744] FAILED (try 2) srpm=perl-Convert-TNEF-0.17-alt2.src.rpm ...
Date: Mon, 15 Nov 2010 22:11:37 +0300
Message-ID: <20101115191137.GA19554@ssh.git.altlinux.org> (raw)
http://git.altlinux.org/tasks/32744/task/log.2.1
2010-Nov-15 22:01:32 :: task #32744 for sisyphus resumed by shaba:
#100 build perl-Convert-TNEF-0.17-alt2.src.rpm
#200 build perl-Net-Nslookup-1.19-alt2.src.rpm
#300 build perl-Net-SSH-Expect-1.09-alt2.src.rpm
#400 build perl-PDF-ReportWriter-1.5-alt2.src.rpm
#500 build perl-POE-Component-Client-Ident-1.16-alt2.src.rpm
#600 build perl-POE-Component-Client-DNS-1.051-alt2.src.rpm
#700 build perl-POE-Component-SSLify-0.20-alt1.src.rpm
#1000 build perl-POE-Component-Pluggable-1.26-alt2.src.rpm
#1100 build perl-Test-POE-Server-TCP-1.14-alt1.src.rpm
#1200 build perl-POE-Filter-IRCD-2.42-alt2.src.rpm
#1300 build perl-POE-Filter-XML-0.38-alt1.src.rpm
#1400 build perl-POE-Filter-Zlib-2.02-alt2.src.rpm
#1500 removed
#1600 build perl-POE-Component-PubSub-0.05-alt1.src.rpm
#1700 build perl-POE-Component-Jabber-3.00-alt1.src.rpm
#2000 build perl-ldap-0.4001-alt1.src.rpm
2010-Nov-15 22:01:33 :: cloned Sisyphus
2010-Nov-15 22:01:44 :: created build repo
2010-Nov-15 22:01:45 :: [i586] #100 perl-Convert-TNEF-0.17-alt2.src.rpm: build start
2010-Nov-15 22:01:45 :: [x86_64] #100 perl-Convert-TNEF-0.17-alt2.src.rpm: build start
2010-Nov-15 22:02:35 :: [i586] perl-Convert-TNEF-0.17-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:02:36 :: [i586] #100 perl-Convert-TNEF-0.17-alt2.src.rpm: build OK
2010-Nov-15 22:02:36 :: [i586] #200 perl-Net-Nslookup-1.19-alt2.src.rpm: build start
2010-Nov-15 22:02:39 :: [x86_64] perl-Convert-TNEF-0.17-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:02:39 :: [x86_64] #100 perl-Convert-TNEF-0.17-alt2.src.rpm: build OK
2010-Nov-15 22:02:39 :: [x86_64] #200 perl-Net-Nslookup-1.19-alt2.src.rpm: build start
2010-Nov-15 22:03:11 :: [i586] perl-Net-Nslookup-1.19-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:03:12 :: [i586] #200 perl-Net-Nslookup-1.19-alt2.src.rpm: build OK
2010-Nov-15 22:03:12 :: [i586] #300 perl-Net-SSH-Expect-1.09-alt2.src.rpm: build start
2010-Nov-15 22:03:15 :: [x86_64] perl-Net-Nslookup-1.19-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:03:22 :: [x86_64] #200 perl-Net-Nslookup-1.19-alt2.src.rpm: build OK
2010-Nov-15 22:03:22 :: [x86_64] #300 perl-Net-SSH-Expect-1.09-alt2.src.rpm: build start
2010-Nov-15 22:03:48 :: [i586] perl-Net-SSH-Expect-1.09-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:03:49 :: [i586] #300 perl-Net-SSH-Expect-1.09-alt2.src.rpm: build OK
2010-Nov-15 22:03:49 :: [i586] #400 perl-PDF-ReportWriter-1.5-alt2.src.rpm: build start
2010-Nov-15 22:03:59 :: [x86_64] perl-Net-SSH-Expect-1.09-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:04:08 :: [x86_64] #300 perl-Net-SSH-Expect-1.09-alt2.src.rpm: build OK
2010-Nov-15 22:04:09 :: [x86_64] #400 perl-PDF-ReportWriter-1.5-alt2.src.rpm: build start
2010-Nov-15 22:04:24 :: [i586] perl-PDF-ReportWriter-1.5-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:04:24 :: [i586] #400 perl-PDF-ReportWriter-1.5-alt2.src.rpm: build OK
2010-Nov-15 22:04:24 :: [i586] #500 perl-POE-Component-Client-Ident-1.16-alt2.src.rpm: build start
2010-Nov-15 22:04:45 :: [x86_64] perl-PDF-ReportWriter-1.5-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:04:48 :: [x86_64] #400 perl-PDF-ReportWriter-1.5-alt2.src.rpm: build OK
2010-Nov-15 22:04:48 :: [x86_64] #500 perl-POE-Component-Client-Ident-1.16-alt2.src.rpm: build start
2010-Nov-15 22:04:59 :: [i586] perl-POE-Component-Client-Ident-1.16-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:05:00 :: [i586] #500 perl-POE-Component-Client-Ident-1.16-alt2.src.rpm: build OK
2010-Nov-15 22:05:00 :: [i586] #600 perl-POE-Component-Client-DNS-1.051-alt2.src.rpm: build start
2010-Nov-15 22:05:24 :: [x86_64] perl-POE-Component-Client-Ident-1.16-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:05:24 :: [x86_64] #500 perl-POE-Component-Client-Ident-1.16-alt2.src.rpm: build OK
2010-Nov-15 22:05:24 :: [x86_64] #600 perl-POE-Component-Client-DNS-1.051-alt2.src.rpm: build start
2010-Nov-15 22:05:34 :: [i586] perl-POE-Component-Client-DNS-1.051-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:05:34 :: [i586] #600 perl-POE-Component-Client-DNS-1.051-alt2.src.rpm: build OK
2010-Nov-15 22:05:34 :: [i586] #700 perl-POE-Component-SSLify-0.20-alt1.src.rpm: build start
2010-Nov-15 22:06:00 :: [x86_64] perl-POE-Component-Client-DNS-1.051-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:06:00 :: [x86_64] #600 perl-POE-Component-Client-DNS-1.051-alt2.src.rpm: build OK
2010-Nov-15 22:06:00 :: [x86_64] #700 perl-POE-Component-SSLify-0.20-alt1.src.rpm: build start
2010-Nov-15 22:06:10 :: [i586] perl-POE-Component-SSLify-0.20-alt1.src.rpm: remote: no need to rebuild
2010-Nov-15 22:06:10 :: [i586] #700 perl-POE-Component-SSLify-0.20-alt1.src.rpm: build OK
2010-Nov-15 22:06:10 :: [i586] #1000 perl-POE-Component-Pluggable-1.26-alt2.src.rpm: build start
2010-Nov-15 22:06:37 :: [x86_64] perl-POE-Component-SSLify-0.20-alt1.src.rpm: remote: no need to rebuild
2010-Nov-15 22:06:37 :: [x86_64] #700 perl-POE-Component-SSLify-0.20-alt1.src.rpm: build OK
2010-Nov-15 22:06:37 :: [x86_64] #1000 perl-POE-Component-Pluggable-1.26-alt2.src.rpm: build start
2010-Nov-15 22:06:44 :: [i586] perl-POE-Component-Pluggable-1.26-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:06:44 :: [i586] #1000 perl-POE-Component-Pluggable-1.26-alt2.src.rpm: build OK
2010-Nov-15 22:06:44 :: [i586] #1100 perl-Test-POE-Server-TCP-1.14-alt1.src.rpm: build start
2010-Nov-15 22:07:13 :: [x86_64] perl-POE-Component-Pluggable-1.26-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:07:14 :: [x86_64] #1000 perl-POE-Component-Pluggable-1.26-alt2.src.rpm: build OK
2010-Nov-15 22:07:14 :: [x86_64] #1100 perl-Test-POE-Server-TCP-1.14-alt1.src.rpm: build start
2010-Nov-15 22:07:19 :: [i586] perl-Test-POE-Server-TCP-1.14-alt1.src.rpm: remote: no need to rebuild
2010-Nov-15 22:07:19 :: [i586] #1100 perl-Test-POE-Server-TCP-1.14-alt1.src.rpm: build OK
2010-Nov-15 22:07:19 :: [i586] #1200 perl-POE-Filter-IRCD-2.42-alt2.src.rpm: build start
2010-Nov-15 22:07:50 :: [x86_64] perl-Test-POE-Server-TCP-1.14-alt1.src.rpm: remote: no need to rebuild
2010-Nov-15 22:07:50 :: [x86_64] #1100 perl-Test-POE-Server-TCP-1.14-alt1.src.rpm: build OK
2010-Nov-15 22:07:50 :: [x86_64] #1200 perl-POE-Filter-IRCD-2.42-alt2.src.rpm: build start
2010-Nov-15 22:07:54 :: [i586] perl-POE-Filter-IRCD-2.42-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:07:54 :: [i586] #1200 perl-POE-Filter-IRCD-2.42-alt2.src.rpm: build OK
2010-Nov-15 22:07:54 :: [i586] #1300 perl-POE-Filter-XML-0.38-alt1.src.rpm: build start
2010-Nov-15 22:08:26 :: [x86_64] perl-POE-Filter-IRCD-2.42-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:08:27 :: [x86_64] #1200 perl-POE-Filter-IRCD-2.42-alt2.src.rpm: build OK
2010-Nov-15 22:08:27 :: [x86_64] #1300 perl-POE-Filter-XML-0.38-alt1.src.rpm: build start
2010-Nov-15 22:08:28 :: [i586] perl-POE-Filter-XML-0.38-alt1.src.rpm: remote: no need to rebuild
2010-Nov-15 22:08:29 :: [i586] #1300 perl-POE-Filter-XML-0.38-alt1.src.rpm: build OK
2010-Nov-15 22:08:29 :: [i586] #1400 perl-POE-Filter-Zlib-2.02-alt2.src.rpm: build start
2010-Nov-15 22:09:03 :: [x86_64] perl-POE-Filter-XML-0.38-alt1.src.rpm: remote: no need to rebuild
2010-Nov-15 22:09:03 :: [x86_64] #1300 perl-POE-Filter-XML-0.38-alt1.src.rpm: build OK
2010-Nov-15 22:09:03 :: [x86_64] #1400 perl-POE-Filter-Zlib-2.02-alt2.src.rpm: build start
2010-Nov-15 22:09:04 :: [i586] perl-POE-Filter-Zlib-2.02-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:09:04 :: [i586] #1400 perl-POE-Filter-Zlib-2.02-alt2.src.rpm: build OK
2010-Nov-15 22:09:04 :: [i586] #1600 perl-POE-Component-PubSub-0.05-alt1.src.rpm: build start
2010-Nov-15 22:09:40 :: [x86_64] perl-POE-Filter-Zlib-2.02-alt2.src.rpm: remote: no need to rebuild
2010-Nov-15 22:09:40 :: [x86_64] #1400 perl-POE-Filter-Zlib-2.02-alt2.src.rpm: build OK
2010-Nov-15 22:09:40 :: [x86_64] #1600 perl-POE-Component-PubSub-0.05-alt1.src.rpm: build start
2010-Nov-15 22:10:03 :: [i586] #1600 perl-POE-Component-PubSub-0.05-alt1.src.rpm: build OK
2010-Nov-15 22:10:03 :: [i586] #1700 perl-POE-Component-Jabber-3.00-alt1.src.rpm: build start
2010-Nov-15 22:10:41 :: [x86_64] #1600 perl-POE-Component-PubSub-0.05-alt1.src.rpm: build OK
2010-Nov-15 22:10:41 :: [x86_64] #1700 perl-POE-Component-Jabber-3.00-alt1.src.rpm: build start
! POE::Component::SSLify is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
--
+ /usr/bin/perl Build test
# Failed test 'use POE::Component::Jabber;'
# at t/01_basic.t line 10.
# Tried to use 'POE::Component::Jabber'.
# Error: Can't locate POE/Component/PubSub.pm in @INC (@INC contains: /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/arch /usr/lib/perl5/site_perl/5.12.2/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.12.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib/POE/Component/Jabber.pm line 10.
# BEGIN failed--compilation aborted at /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib/POE/Component/Jabber.pm line 10.
# Compilation failed in require at (eval 69) line 2.
# BEGIN failed--compilation aborted at (eval 69) line 2.
# Failed test 'use POE::Component::Jabber::ProtocolFactory;'
# at t/01_basic.t line 12.
# Tried to use 'POE::Component::Jabber::ProtocolFactory'.
# Error: Can't locate POE/Component/SSLify.pm in @INC (@INC contains: /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/arch /usr/lib/perl5/site_perl/5.12.2/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.12.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib/POE/Component/Jabber/XMPP.pm line 7.
# BEGIN failed--compilation aborted at /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib/POE/Component/Jabber/XMPP.pm line 7.
# Compilation failed in require at /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib/POE/Component/Jabber/ProtocolFactory.pm line 6.
# BEGIN failed--compilation aborted at /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib/POE/Component/Jabber/ProtocolFactory.pm line 6.
# Compilation failed in require at (eval 84) line 2.
# BEGIN failed--compilation aborted at (eval 84) line 2.
Bareword "XMPP" not allowed while "strict subs" in use at t/01_basic.t line 108.
2010-Nov-15 22:10:59 :: [i586] perl-POE-Component-Jabber-3.00-alt1.src.rpm: remote: build failed
2010-Nov-15 22:10:59 :: [i586] #1700 perl-POE-Component-Jabber-3.00-alt1.src.rpm: build FAILED
! POE::Component::SSLify is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
--
+ /usr/bin/perl Build test
# Failed test 'use POE::Component::Jabber;'
# at t/01_basic.t line 10.
# Tried to use 'POE::Component::Jabber'.
# Error: Can't locate POE/Component/PubSub.pm in @INC (@INC contains: /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/arch /usr/lib/perl5/site_perl/5.12.2/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.12.2 /usr/lib64/perl5 /usr/share/perl5 /usr/lib64/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib/POE/Component/Jabber.pm line 10.
# BEGIN failed--compilation aborted at /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib/POE/Component/Jabber.pm line 10.
# Compilation failed in require at (eval 69) line 2.
# BEGIN failed--compilation aborted at (eval 69) line 2.
# Failed test 'use POE::Component::Jabber::ProtocolFactory;'
# at t/01_basic.t line 12.
# Tried to use 'POE::Component::Jabber::ProtocolFactory'.
# Error: Can't locate POE/Component/SSLify.pm in @INC (@INC contains: /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/arch /usr/lib/perl5/site_perl/5.12.2/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.12.2 /usr/lib64/perl5 /usr/share/perl5 /usr/lib64/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib/POE/Component/Jabber/XMPP.pm line 7.
# BEGIN failed--compilation aborted at /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib/POE/Component/Jabber/XMPP.pm line 7.
# Compilation failed in require at /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib/POE/Component/Jabber/ProtocolFactory.pm line 6.
# BEGIN failed--compilation aborted at /usr/src/RPM/BUILD/POE-Component-Jabber-3.00/blib/lib/POE/Component/Jabber/ProtocolFactory.pm line 6.
# Compilation failed in require at (eval 84) line 2.
# BEGIN failed--compilation aborted at (eval 84) line 2.
Bareword "XMPP" not allowed while "strict subs" in use at t/01_basic.t line 108.
2010-Nov-15 22:11:36 :: [x86_64] perl-POE-Component-Jabber-3.00-alt1.src.rpm: remote: build failed
2010-Nov-15 22:11:36 :: [x86_64] #1700 perl-POE-Component-Jabber-3.00-alt1.src.rpm: build FAILED
2010-Nov-15 22:10:59 :: [i586] build FAILED
2010-Nov-15 22:11:36 :: [x86_64] build FAILED
2010-Nov-15 22:11:36 :: task #32744 for sisyphus FAILED
reply other threads:[~2010-11-15 19:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101115191137.GA19554@ssh.git.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=shaba@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git