[cyber] I: Sisyphus-20251123 x86_64 beehive_status: +15 -24 (220)

[cyber] I: Sisyphus-20251123 x86_64 beehive_status: +15 -24 (220)

[ALT beekeeper]

	15 NEW error logs

apicatalog-titanium-json-ld-1.7.0-alt1
	[ERROR]
	[ERROR] Please refer to
	/usr/src/RPM/BUILD/apicatalog-titanium-json-ld-1.7.0/target/surefire-reports for the
	individual test results.
	[ERROR] Please refer to dump files (if any exist) [date].dump, [date]-jvmRun[N].dump and
	[date].dumpstream.
	[ERROR] -> [Help 1]
	[ERROR]
	[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
	[ERROR] Re-run Maven using the -X switch to enable full debug logging.
	[ERROR]
	[ERROR] For more information about the errors and possible solutions, please read the
	following articles:
	[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException

beremiz-1.4-alt0.1.20250821.1
	dos2unix: converting file ./CONTRIBUTING.md to Unix format...
	dos2unix: converting file ./CLIController.py to Unix format...
	dos2unix: converting file ./Beremiz_service.py to Unix format...
	dos2unix: converting file ./Beremiz_cli.py to Unix format...
	dos2unix: converting file ./BeremizIDE.py to Unix format...
	dos2unix: converting file ./Beremiz.py to Unix format...
	dos2unix: converting file ./.pylint to Unix format...
	dos2unix: converting file ./.hgignore to Unix format...
	dos2unix: converting file ./.gitignore to Unix format...
	dos2unix: converting file ./.github/workflows/run_tests_in_docker.yml to Unix format...

blender4.5-4.5.5-alt1
	[3664/6620] cd /usr/src/RPM/BUILD/blender4.5-4.5.5/x86_64-alt-linux/intern/cycles/kernel
	&& /usr/src/RPM/BUILD/blender4.5-4.5.5/x86_64-alt-linux/bin/zstd_compress
	/usr/src/RPM/BUILD/blender4.5-4.5.5/x86_64-alt-linux/intern/cycles/kernel/kernel_rt_gfx902.hipfb
	/usr/src/RPM/BUILD/blender4.5-4.5.5/x86_64-alt-linux/intern/cycles/kernel/kernel_rt_gfx902.hipfb.zst
	hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded

dm-secdel-1.0.12-alt1
	systemctl daemon-reload
	make: systemctl: No such file or directory
	make: [Makefile:24: install-bin] Error 127 (ignored)
	systemctl enable secdeltab
	make: systemctl: No such file or directory
	make: [Makefile:25: install-bin] Error 127 (ignored)

guile-fibers-1.4.0-alt1
	make  check-TESTS
	hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded

libfreeimage-3.18.0-alt9
	dos2unix: converting file ./Examples/Generic/LoadFromMemory.cpp to Unix format...
	dos2unix: converting file ./Examples/Generic/LoadFromMemory-classified.cpp to Unix
	format...
	dos2unix: converting file ./Examples/Generic/LoadFromHandle.cpp to Unix format...
	dos2unix: converting file ./Examples/Generic/FIIO_Mem.h to Unix format...
	dos2unix: converting file ./Examples/Generic/FIIO_Mem.cpp to Unix format...
	dos2unix: converting file ./Examples/Generic/FIFImportExport.cpp to Unix format...
	dos2unix: converting file ./Examples/Generic/CreateAlpha.cpp to Unix format...
	dos2unix: converting file ./Examples/Generic/CloneMultiPage.cpp to Unix format...
	dos2unix: converting file ./Examples/Generic/BatchLoad.cpp to Unix format...
	dos2unix: converting file ./Dist/delete.me to Unix format...

mumps-5.3.5-alt5
	ld: /usr/src/tmp/ccO7SWNl.ltrans0.ltrans.o: in function `setupElimTree':
	/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/tree.c:377:(.text+0xab89): undefined
	reference to `setupCSSFromGraph'
	ld: /usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/tree.c:377:(.text+0xacbc): undefined
	reference to `setupCSSFromGraph'
	collect2: error: ld returned 1 exit status
	make[2]: *** [Makefile:34: libpord_seq.so] Error 1

perl-Crypt-Primes-0.52-alt1
	Result: FAIL
	Failed 1/7 test programs. 0/26 subtests failed.
	make: *** [Makefile:797: test_dynamic] Error 255

python3-module-backrefs-6.0.1-alt1
	=========================== short test summary info ============================
	FAILED tests/test_bregex.py::TestExceptions::test_timeout - Failed: DID NOT R...
	======================== 1 failed, 566 passed in 4.38s =========================
	INFO	 : Command's result: FAILURE
	INFO	 : Command's error: Command '['python3', '-m', 'pytest']' returned non-zero
	exit status 1.

python3-module-openstacksdk-4.7.1-alt1
	Sum of execute time for each test: 195.6275 sec.
	Worker Balance
	- Worker 0 (559 tests) => 0:00:30.454807
	- Worker 1 (559 tests) => 0:00:16.454010
	- Worker 2 (559 tests) => 0:00:23.903976
	- Worker 3 (559 tests) => 0:00:28.073402
	- Worker 4 (559 tests) => 0:00:30.097490
	- Worker 5 (559 tests) => 0:00:20.860590
	- Worker 6 (559 tests) => 0:00:22.704933
	- Worker 7 (558 tests) => 0:00:30.337651

python3-module-retrying-1.4.2-alt1
	"msg": "calls_per_second_final was not within +/-20% of calls_per_second_initial"
	E	AssertionError: False is not true : {'calls_per_second_initial':
	14555.446210523543, 'calls_per_second_final': 19433.45287505394, 'msg':
	'calls_per_second_final was not within +/-20% of calls_per_second_initial'}
	test_retrying.py:530: AssertionError
	=========================== short test summary info ============================
	FAILED test_retrying.py::LoadTest::test_load - AssertionError: False is not t...
	======================== 1 failed, 26 passed in 24.55s =========================
	INFO	 : Command's result: FAILURE
	INFO	 : Command's error: Command '['python3', '-m', 'pytest', 'test_retrying.py']'
	returned non-zero exit status 1.

python3-module-urllib3-2:2.5.0-alt1
	SKIPPED [3] test/with_dummyserver/test_socketlevel.py:2613: urllib3 uses Content-Length
	in this case
	FAILED
	test/with_dummyserver/test_socketlevel.py::TestProxyManager::test_tunnel_sets_http_11_alpn
	- AssertionError: assert b'h2' not in
	b'\x16\x03\x01\x06\x17\x01\x00\x06\x13\x03\x03\x00\xf0%b\xe0\xe8T\x93\x8d\x19\xfc\xdf[\xd8>\xf6\x82\x19#\xb39}\t\'\x7f...\x00
	\xaez\xa2Zel\x91#\xa1\x91+\x9es\xcb\xbf\xdbz\x11\x0e\x84\'\xfd)\xe4s\x06!\x8e\xf2C\tc\x00\x1b\x00\x03\x02\x00\x01'
	+  where
	b'\x16\x03\x01\x06\x17\x01\x00\x06\x13\x03\x03\x00\xf0%b\xe0\xe8T\x93\x8d\x19\xfc\xdf[\xd8>\xf6\x82\x19#\xb39}\t\'\x7f...\x00
	\xaez\xa2Zel\x91#\xa1\x91+\x9es\xcb\xbf\xdbz\x11\x0e\x84\'\xfd)\xe4s\x06!\x8e\xf2C\tc\x00\x1b\x00\x03\x02\x00\x01'
	= <test.with_dummyserver.test_socketlevel.TestProxyManager object at 0x7fd31b90fce0>.buf
	--
	INFO	 : Command's result: FAILURE
	INFO	 : Command's error: Command '['python3', '-m', 'pytest', '-ra']' returned
	non-zero exit status 1.

python3-module-vcrpy-7.0.0-alt1
	>	    self.sock.sendall(data)
	E	    BrokenPipeError: [Errno 32] Broken pipe
	/usr/lib64/python3.13/http/client.py:1057: BrokenPipeError
	--
	meta = pop_unraisable()
	except IndexError:
	break
	--
	=========================== short test summary info ============================
	FAILED tests/unit/test_stubs.py::TestVCRConnection::test_body_consumed_once_stream
	FAILED tests/unit/test_vcr.py::TestVCRClass::test_one - pytest.PytestUnraisab...
	================= 2 failed, 175 passed, 3 deselected in 1.56s ==================
	INFO	 : Command's result: FAILURE
	INFO	 : Command's error: Command '['python3', '-m', 'pytest', '-ra', '-m', 'not online',
	'tests/unit/']' returned non-zero exit status 1.
	error: Bad exit status from /usr/src/tmp/rpm-tmp.91486 (%check)

tmux-3.5a-alt1
	sh cursor-test4.sh
	sh format-strings.sh
	sh has-session-return.sh
	sh if-shell-TERM.sh
	sh if-shell-error.sh
	sh if-shell-nested.sh
	sh input-keys.sh
	[FAIL] M-C-j -> ^[ (Got: )
	make: *** [Makefile:9: input-keys.sh] Error 1
	make: Leaving directory '/usr/src/RPM/BUILD/tmux-3.5a/regress'

tripso-1.2.2-alt2
	10.99.0.1 > 10.99.0.3: ICMP echo request, id 17547, seq 1, length 64
	= Received packet matches expected!
	= send test/cipso-dsp-c1.pkt
	[   23.446163] xt_TRIPSO: option cipso 0x86[b]<2> 86 0b 00 00 00 01 01 05 00 01 40 00
	[   23.448421] xt_TRIPSO: : cipso level=1 categories=2
	[   23.448852] xt_TRIPSO: :: translated to astra: 82 05 ab 03 08
	[   23.449385] xt_TRIPSO: ::: packet shortened 4 bytes. [92]
	IP (tos 0x0, ttl 64, id 50004, offset 0, flags [DF], proto ICMP (1), length 96, options
	(unknown 134,EOL))
	10.99.0.1 > 10.99.0.3: ICMP echo request, id 18037, seq 1, length 64
	qemu-system-x86_64: terminating on signal 15 from pid 3452459 (timeout)

	24 error logs REMOVED from the list
android-tools-34.0.5-alt3
autogen-5.18.16-alt1
cilk-5.4.6-alt13
dufs-0.43.0-alt1
eclib-20250627-alt1
eog-47.0-alt1
glog-0.7.1-alt1
java-1.8.0-openjdk-0:1.8.0.472.b08-alt2
libgtk-engine-murrine-0.98.1.1-alt0.1.1.1
libgupnp-igd-1.6.0-alt1
liboqs-0.15.0-alt1
perl-POE-Component-SSLify-1.012-alt1_17
perl-Parallel-Runner-0.014-alt1_3
perl-Sane-0.05-alt3.2
perl-Starlet-0.31-alt1_22
plank-0.11.89-alt2
python3-module-aiohomekit-3.2.20-alt1
python3-module-easyprocess-1.1-alt2
python3-module-pythran-0.18.0-alt2
python3-module-requests-unixsocket2-1.0.1-alt1
python3-module-textdistance-4.6.3-alt1
python3-module-xonsh-0.19.9-alt1
valkey-8.1.3-alt1
wabt-1.0.39-alt1

Total 220 error logs.