From: ALT beekeeper <hiver@altlinux.org>
To: sisyphus-cybertalk@lists.altlinux.org
Subject: [cyber] I: Sisyphus-20251123 x86_64 beehive_status: +15 -24 (220)
Date: Sun, 23 Nov 2025 14:02:16 +0000
Message-ID: <aSMT6G28nAjCArq0@beehive.mskdc.altlinux.org> (raw)
15 NEW error logs
apicatalog-titanium-json-ld-1.7.0-alt1
[ERROR]
[ERROR] Please refer to
/usr/src/RPM/BUILD/apicatalog-titanium-json-ld-1.7.0/target/surefire-reports for the
individual test results.
[ERROR] Please refer to dump files (if any exist) [date].dump, [date]-jvmRun[N].dump and
[date].dumpstream.
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the
following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException
beremiz-1.4-alt0.1.20250821.1
dos2unix: converting file ./CONTRIBUTING.md to Unix format...
dos2unix: converting file ./CLIController.py to Unix format...
dos2unix: converting file ./Beremiz_service.py to Unix format...
dos2unix: converting file ./Beremiz_cli.py to Unix format...
dos2unix: converting file ./BeremizIDE.py to Unix format...
dos2unix: converting file ./Beremiz.py to Unix format...
dos2unix: converting file ./.pylint to Unix format...
dos2unix: converting file ./.hgignore to Unix format...
dos2unix: converting file ./.gitignore to Unix format...
dos2unix: converting file ./.github/workflows/run_tests_in_docker.yml to Unix format...
blender4.5-4.5.5-alt1
[3664/6620] cd /usr/src/RPM/BUILD/blender4.5-4.5.5/x86_64-alt-linux/intern/cycles/kernel
&& /usr/src/RPM/BUILD/blender4.5-4.5.5/x86_64-alt-linux/bin/zstd_compress
/usr/src/RPM/BUILD/blender4.5-4.5.5/x86_64-alt-linux/intern/cycles/kernel/kernel_rt_gfx902.hipfb
/usr/src/RPM/BUILD/blender4.5-4.5.5/x86_64-alt-linux/intern/cycles/kernel/kernel_rt_gfx902.hipfb.zst
hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded
dm-secdel-1.0.12-alt1
systemctl daemon-reload
make: systemctl: No such file or directory
make: [Makefile:24: install-bin] Error 127 (ignored)
systemctl enable secdeltab
make: systemctl: No such file or directory
make: [Makefile:25: install-bin] Error 127 (ignored)
guile-fibers-1.4.0-alt1
make check-TESTS
hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded
libfreeimage-3.18.0-alt9
dos2unix: converting file ./Examples/Generic/LoadFromMemory.cpp to Unix format...
dos2unix: converting file ./Examples/Generic/LoadFromMemory-classified.cpp to Unix
format...
dos2unix: converting file ./Examples/Generic/LoadFromHandle.cpp to Unix format...
dos2unix: converting file ./Examples/Generic/FIIO_Mem.h to Unix format...
dos2unix: converting file ./Examples/Generic/FIIO_Mem.cpp to Unix format...
dos2unix: converting file ./Examples/Generic/FIFImportExport.cpp to Unix format...
dos2unix: converting file ./Examples/Generic/CreateAlpha.cpp to Unix format...
dos2unix: converting file ./Examples/Generic/CloneMultiPage.cpp to Unix format...
dos2unix: converting file ./Examples/Generic/BatchLoad.cpp to Unix format...
dos2unix: converting file ./Dist/delete.me to Unix format...
mumps-5.3.5-alt5
ld: /usr/src/tmp/ccO7SWNl.ltrans0.ltrans.o: in function `setupElimTree':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/tree.c:377:(.text+0xab89): undefined
reference to `setupCSSFromGraph'
ld: /usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/tree.c:377:(.text+0xacbc): undefined
reference to `setupCSSFromGraph'
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:34: libpord_seq.so] Error 1
perl-Crypt-Primes-0.52-alt1
Result: FAIL
Failed 1/7 test programs. 0/26 subtests failed.
make: *** [Makefile:797: test_dynamic] Error 255
python3-module-backrefs-6.0.1-alt1
=========================== short test summary info ============================
FAILED tests/test_bregex.py::TestExceptions::test_timeout - Failed: DID NOT R...
======================== 1 failed, 566 passed in 4.38s =========================
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest']' returned non-zero
exit status 1.
python3-module-openstacksdk-4.7.1-alt1
Sum of execute time for each test: 195.6275 sec.
Worker Balance
- Worker 0 (559 tests) => 0:00:30.454807
- Worker 1 (559 tests) => 0:00:16.454010
- Worker 2 (559 tests) => 0:00:23.903976
- Worker 3 (559 tests) => 0:00:28.073402
- Worker 4 (559 tests) => 0:00:30.097490
- Worker 5 (559 tests) => 0:00:20.860590
- Worker 6 (559 tests) => 0:00:22.704933
- Worker 7 (558 tests) => 0:00:30.337651
python3-module-retrying-1.4.2-alt1
"msg": "calls_per_second_final was not within +/-20% of calls_per_second_initial"
E AssertionError: False is not true : {'calls_per_second_initial':
14555.446210523543, 'calls_per_second_final': 19433.45287505394, 'msg':
'calls_per_second_final was not within +/-20% of calls_per_second_initial'}
test_retrying.py:530: AssertionError
=========================== short test summary info ============================
FAILED test_retrying.py::LoadTest::test_load - AssertionError: False is not t...
======================== 1 failed, 26 passed in 24.55s =========================
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest', 'test_retrying.py']'
returned non-zero exit status 1.
python3-module-urllib3-2:2.5.0-alt1
SKIPPED [3] test/with_dummyserver/test_socketlevel.py:2613: urllib3 uses Content-Length
in this case
FAILED
test/with_dummyserver/test_socketlevel.py::TestProxyManager::test_tunnel_sets_http_11_alpn
- AssertionError: assert b'h2' not in
b'\x16\x03\x01\x06\x17\x01\x00\x06\x13\x03\x03\x00\xf0%b\xe0\xe8T\x93\x8d\x19\xfc\xdf[\xd8>\xf6\x82\x19#\xb39}\t\'\x7f...\x00
\xaez\xa2Zel\x91#\xa1\x91+\x9es\xcb\xbf\xdbz\x11\x0e\x84\'\xfd)\xe4s\x06!\x8e\xf2C\tc\x00\x1b\x00\x03\x02\x00\x01'
+ where
b'\x16\x03\x01\x06\x17\x01\x00\x06\x13\x03\x03\x00\xf0%b\xe0\xe8T\x93\x8d\x19\xfc\xdf[\xd8>\xf6\x82\x19#\xb39}\t\'\x7f...\x00
\xaez\xa2Zel\x91#\xa1\x91+\x9es\xcb\xbf\xdbz\x11\x0e\x84\'\xfd)\xe4s\x06!\x8e\xf2C\tc\x00\x1b\x00\x03\x02\x00\x01'
= <test.with_dummyserver.test_socketlevel.TestProxyManager object at 0x7fd31b90fce0>.buf
--
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest', '-ra']' returned
non-zero exit status 1.
python3-module-vcrpy-7.0.0-alt1
> self.sock.sendall(data)
E BrokenPipeError: [Errno 32] Broken pipe
/usr/lib64/python3.13/http/client.py:1057: BrokenPipeError
--
meta = pop_unraisable()
except IndexError:
break
--
=========================== short test summary info ============================
FAILED tests/unit/test_stubs.py::TestVCRConnection::test_body_consumed_once_stream
FAILED tests/unit/test_vcr.py::TestVCRClass::test_one - pytest.PytestUnraisab...
================= 2 failed, 175 passed, 3 deselected in 1.56s ==================
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest', '-ra', '-m', 'not online',
'tests/unit/']' returned non-zero exit status 1.
error: Bad exit status from /usr/src/tmp/rpm-tmp.91486 (%check)
tmux-3.5a-alt1
sh cursor-test4.sh
sh format-strings.sh
sh has-session-return.sh
sh if-shell-TERM.sh
sh if-shell-error.sh
sh if-shell-nested.sh
sh input-keys.sh
[FAIL] M-C-j -> ^[ (Got: )
make: *** [Makefile:9: input-keys.sh] Error 1
make: Leaving directory '/usr/src/RPM/BUILD/tmux-3.5a/regress'
tripso-1.2.2-alt2
10.99.0.1 > 10.99.0.3: ICMP echo request, id 17547, seq 1, length 64
= Received packet matches expected!
= send test/cipso-dsp-c1.pkt
[ 23.446163] xt_TRIPSO: option cipso 0x86[b]<2> 86 0b 00 00 00 01 01 05 00 01 40 00
[ 23.448421] xt_TRIPSO: : cipso level=1 categories=2
[ 23.448852] xt_TRIPSO: :: translated to astra: 82 05 ab 03 08
[ 23.449385] xt_TRIPSO: ::: packet shortened 4 bytes. [92]
IP (tos 0x0, ttl 64, id 50004, offset 0, flags [DF], proto ICMP (1), length 96, options
(unknown 134,EOL))
10.99.0.1 > 10.99.0.3: ICMP echo request, id 18037, seq 1, length 64
qemu-system-x86_64: terminating on signal 15 from pid 3452459 (timeout)
24 error logs REMOVED from the list
android-tools-34.0.5-alt3
autogen-5.18.16-alt1
cilk-5.4.6-alt13
dufs-0.43.0-alt1
eclib-20250627-alt1
eog-47.0-alt1
glog-0.7.1-alt1
java-1.8.0-openjdk-0:1.8.0.472.b08-alt2
libgtk-engine-murrine-0.98.1.1-alt0.1.1.1
libgupnp-igd-1.6.0-alt1
liboqs-0.15.0-alt1
perl-POE-Component-SSLify-1.012-alt1_17
perl-Parallel-Runner-0.014-alt1_3
perl-Sane-0.05-alt3.2
perl-Starlet-0.31-alt1_22
plank-0.11.89-alt2
python3-module-aiohomekit-3.2.20-alt1
python3-module-easyprocess-1.1-alt2
python3-module-pythran-0.18.0-alt2
python3-module-requests-unixsocket2-1.0.1-alt1
python3-module-textdistance-4.6.3-alt1
python3-module-xonsh-0.19.9-alt1
valkey-8.1.3-alt1
wabt-1.0.39-alt1
Total 220 error logs.
reply other threads:[~2025-11-23 14:02 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aSMT6G28nAjCArq0@beehive.mskdc.altlinux.org \
--to=hiver@altlinux.org \
--cc=devel@lists.altlinux.org \
--cc=sisyphus-cybertalk@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Sisyphus cybertalk
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \
sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com
public-inbox-index sisyphus-cybertalk
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git