From: ALT beekeeper <hiver@altlinux.org> To: sisyphus-cybertalk@lists.altlinux.org Subject: [cyber] I: Sisyphus-20250520 x86_64 beehive_status: +22 -17 (319) Date: Tue, 20 May 2025 06:19:21 +0000 Message-ID: <aCwe6UaukYSj0EW3@beehive.mskdc.altlinux.org> (raw) 22 NEW error logs Cardinal-24.12-alt1 ld: ../../carla/build/modules/Release/jackbridge.min.a: error adding symbols: archive has no index; run ranlib to add one collect2: error: ld returned 1 exit status make[2]: *** [../../dpf/Makefile.plugins.mk:557: ../../bin/Cardinal] Error 1 -- ld: ../../carla/build/modules/Release/jackbridge.min.a: error adding symbols: archive has no index; run ranlib to add one collect2: error: ld returned 1 exit status make[2]: *** [../../dpf/Makefile.plugins.mk:600: ../../bin/Cardinal.lv2/Cardinal.so] Error 1 auditd-plugin-clickhouse-lite-0.1.8-alt2 test/dbtest/plugin_test.py hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded cryptote-0.6.0-alt3 checking for wxWidgets version >= 2.8.0... no configure: error: wxWidgets does not seem to be installed on your system. elixir-1.17.3-alt1 match (=) failed code: assert {["hello", "world"], 0} = System.cmd("echo", ["-n", "hello\nworld"], into: [], lines: 3) left: {["hello", "world"], 0} right: {["hello"], 0} stacktrace: test/elixir/system_test.exs:200: (test) Finished in 19.8 seconds (7.2s on load, 7.8s async, 4.7s sync) 2049 doctests, 4364 tests, 1 failure, 13 excluded make: *** [Makefile:280: test_stdlib] Error 2 make: Leaving directory '/usr/src/RPM/BUILD/elixir-1.17.3' freedink-dfarc-3.12-alt3 checking for wxWidgets version >= 3.0.0... no configure: error: wxWidgets must be installed on your system. megaglest-3.13.0-alt3 -- Checking for one of the modules 'glib-2.0' Package libpcre2-8 was not found in the pkg-config search path. Perhaps you should add the directory containing `libpcre2-8.pc' to the PKG_CONFIG_PATH environment variable Package 'libpcre2-8', required by 'glib-2.0', not found Package libpcre2-8 was not found in the pkg-config search path. Perhaps you should add the directory containing `libpcre2-8.pc' to the PKG_CONFIG_PATH environment variable Package 'libpcre2-8', required by 'glib-2.0', not found Package libpcre2-8 was not found in the pkg-config search path. Perhaps you should add the directory containing `libpcre2-8.pc' to the PKG_CONFIG_PATH environment variable Package 'libpcre2-8', required by 'glib-2.0', not found Package libpcre2-8 was not found in the pkg-config search path. Perhaps you should add the directory containing `libpcre2-8.pc' to the PKG_CONFIG_PATH environment variable Package 'libpcre2-8', required by 'glib-2.0', not found -- Found GLib2: glib-2.0 /usr/include/glib-2.0;/usr/lib64/glib-2.0/include perl-Alien-wxWidgets-0.69-alt2 ! LWP::Protocol::https is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation perl-Gearman-2.004.015-alt1_5 t/40-prefix.t ................... ok # Failed test 'timeout' # at /usr/share/perl5/Test/Timer.pm line 31. -- # Looks like you failed 1 test of 10. # Failed test 'wait with timeout' # at t/50-wait_timeout.t line 65. -- t/50-wait_timeout.t (Wstat: 256 (exited 1) Tests: 4 Failed: 1) Failed test: 3 Non-zero exit status: 1 -- Result: FAIL Failed 1/24 test programs. 1/337 subtests failed. make: *** [Makefile:782: test_dynamic] Error 255 perl-Wx-Scintilla-0.39-alt5 + : running Build script + /usr/bin/perl Build Warning: No config found to match: /usr/lib64/wx/config/gtk3-unicode-3.0 --version in /usr/lib64/wx/config If you require this configuration, please install the desired library build. If this is part of an automated configuration test and no other errors occur, you may safely ignore it. You may use wx-config --list to see all configs available in the default prefix. Cannot find wx-config for wxWidgets. Perhaps you need to install wxWidgets development libraries for your system? at inc/Module/Build/Scintilla.pm line 66. pgadmin3-1.23.0b-alt3 checking wxWidgets version... failed configure: error: The version of wxWidgets required (3.0) is not supported by the installations in /usr. protobuf-3.25.5-alt6 [ERROR] Tests run: 3, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 19.85 s <<< FAILURE! -- in com.google.protobuf.TextFormatPerformanceTest [ERROR] com.google.protobuf.TextFormatPerformanceTest.testProto2ImmutableExtensionTextFormatParsing -- Time elapsed: 10.21 s <<< ERROR! org.junit.runners.model.TestTimedOutException: test timed out after 10000 milliseconds python3-module-devpi-server-6.14.0-alt1 ------------------------------ Captured log call ------------------------------- ERROR root:log.py:80 [NOTI] Fatal exception in thread 'TxNotificationThread' Traceback (most recent call last): -- 2025-05-20 03:37:58,157 INFO NOCTX FIN: waiting for event-serial -1 2025-05-20 03:37:58,157 ERROR [REP] error fetching http://localhost/+changelog/0-?initial_fetch: requests.exceptions.ConnectionError: HTTPConnectionPool(host='localhost', port=80): Max retries exceeded with url: /+changelog/0-?initial_fetch (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fab3413b1d0>: Failed to establish a new connection: [Errno 111] Connection refused')) ------------------------------ Captured log call ------------------------------- -- INFO root:log.py:70 NOCTX FIN: waiting for event-serial -1 ERROR root:log.py:77 [REP] error fetching http://localhost/+changelog/0-?initial_fetch: requests.exceptions.ConnectionError: HTTPConnectionPool(host='localhost', port=80): Max retries exceeded with url: /+changelog/0-?initial_fetch (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fab3413b1d0>: Failed to establish a new connection: [Errno 111] Connection refused')) --------------------------- Captured stdout teardown --------------------------- -- 2025-05-20 03:37:58,159 INFO [REP] fetching http://localhost/+changelog/0?initial_fetch 2025-05-20 03:37:58,161 ERROR [REP] error fetching http://localhost/+changelog/0?initial_fetch: requests.exceptions.ConnectionError: HTTPConnectionPool(host='localhost', port=80): Max retries exceeded with url: /+changelog/0?initial_fetch (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fab3413a7b0>: Failed to establish a new connection: [Errno 111] Connection refused')) ---------------------------- Captured log teardown ----------------------------- -- INFO root:log.py:70 [REP] fetching http://localhost/+changelog/0?initial_fetch ERROR root:log.py:77 [REP] error fetching http://localhost/+changelog/0?initial_fetch: requests.exceptions.ConnectionError: HTTPConnectionPool(host='localhost', port=80): Max retries exceeded with url: /+changelog/0?initial_fetch (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fab3413a7b0>: Failed to establish a new connection: [Errno 111] Connection refused')) _________________ TestStatusInfoPlugin.test_no_primary_update __________________ -- 2025-05-20 03:37:58,760 INFO NOCTX FIN: waiting for event-serial -1 2025-05-20 03:37:58,761 ERROR [REP] error fetching http://localhost/+changelog/0-?initial_fetch: requests.exceptions.ConnectionError: HTTPConnectionPool(host='localhost', port=80): Max retries exceeded with url: /+changelog/0-?initial_fetch (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fab32b32ab0>: Failed to establish a new connection: [Errno 111] Connection refused')) 2025-05-20 03:37:58,761 INFO NOCTX waiting for event-serial -1 -- 2025-05-20 03:37:58,761 INFO [REP] fetching http://localhost/+changelog/0?initial_fetch 2025-05-20 03:37:58,763 ERROR [REP] error fetching http://localhost/+changelog/0?initial_fetch: requests.exceptions.ConnectionError: HTTPConnectionPool(host='localhost', port=80): Max retries exceeded with url: /+changelog/0?initial_fetch (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fab33f1ac00>: Failed to establish a new connection: [Errno 111] Connection refused')) ------------------------------ Captured log call ------------------------------- -- INFO root:log.py:70 NOCTX FIN: waiting for event-serial -1 ERROR root:log.py:77 [REP] error fetching http://localhost/+changelog/0-?initial_fetch: requests.exceptions.ConnectionError: HTTPConnectionPool(host='localhost', port=80): Max retries exceeded with url: /+changelog/0-?initial_fetch (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fab32b32ab0>: Failed to establish a new connection: [Errno 111] Connection refused')) INFO root:log.py:70 NOCTX waiting for event-serial -1 -- INFO root:log.py:70 [REP] fetching http://localhost/+changelog/0?initial_fetch ERROR root:log.py:77 [REP] error fetching http://localhost/+changelog/0?initial_fetch: requests.exceptions.ConnectionError: HTTPConnectionPool(host='localhost', port=80): Max retries exceeded with url: /+changelog/0?initial_fetch (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fab33f1ac00>: Failed to establish a new connection: [Errno 111] Connection refused')) --------------------------- Captured stdout teardown --------------------------- -- XPASS test_devpi_server/test_views_status.py::TestStatusInfoPlugin::test_no_primary_update - sometimes fail due to race condition in db table creation FAILED test_devpi_server/test_mirror.py::TestMirrorStageprojects::test_simplelinks_timeout = 1 failed, 1074 passed, 54 skipped, 1 xfailed, 3 xpassed, 50 warnings in 385.32s (0:06:25) = python3-module-hdf5storage-0.2-alt1.1 datetime.timedelta(seconds=mult * random.randint(-bound, bound)), E ValueError: offset must be a timedelta strictly between -timedelta(hours=24) and timedelta(hours=24), not datetime.timedelta(days=1). tests/make_randoms.py:376: ValueError -- =========================== short test summary info ============================ FAILED tests/test_write_readback.py::test_datetime_datetime[Matlab] - ValueEr... === 1 failed, 2447 passed, 3 skipped, 1 deselected, 1931 warnings in 23.73s ==== INFO : Command's result: FAILURE INFO : Command's error: Command '['python3', '-m', 'pytest', '-k', 'not test_has_required_lazy']' returned non-zero exit status 1. python3-module-hypothesis-jsonschema-0.23.1-alt1 =========================== short test summary info ============================ FAILED tests/test_from_schema.py::test_handles_overlapping_patternproperties FAILED tests/test_from_schema.py::test_errors_on_unencodable_property_name - ... = 2 failed, 859 passed, 59 skipped, 109 xfailed, 2 xpassed in 1717.19s (0:28:37) = INFO : Command's result: FAILURE INFO : Command's error: Command '['python3', '-m', 'pytest', '-n', 'auto']' returned non-zero exit status 1. python3-module-mkdocs-1.6.1-alt1 .......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................E...............................................s..................................................s................s...............s........................................................................................................................ ERROR: test_watch_with_broken_symlinks (mkdocs.tests.livereload_tests.BuildTests.test_watch_with_broken_symlinks) Traceback (most recent call last): -- paths = [os.path.join(root, entry.name) for entry in self.listdir(root)] OSError: [Errno 40] Too many levels of symbolic links: '/usr/src/tmp/mkdocs_test-befmfh0q/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir/circular/subdir' Ran 724 tests in 9.794s FAILED (errors=1, skipped=4) INFO : Command's result: FAILURE INFO : Command's error: Command '['python3', '-m', 'unittest', 'discover', '-p', '*tests.py', 'mkdocs', '--top-level-directory', '.']' returned non-zero exit status 1. error: Bad exit status from /usr/src/tmp/rpm-tmp.63344 (%check) python3-module-pythran-0.18.0-alt1 INFO : Running command: ['python3', '-m', 'pytest', '-n', 'auto'] hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded python3-module-terminado-0.18.1-alt1 tests/basic_test.py::UniqueTermTests::test_large_io_doesnt_hang ^[[32mPASSED^[[0m^[[32m [ 77%]^[[0m tests/basic_test.py::UniqueTermTests::test_max_terminals ^[[31mFAILED^[[0m^[[31m [ 88%]^[[0m tests/basic_test.py::UniqueTermTests::test_unique_processes ^[[32mPASSED^[[0m^[[31m [100%]^[[0m -- > self.assertEqual(msg[0], "setup") ^[[1m^[[31mE TypeError: 'NoneType' object is not subscriptable^[[0m msg = None -- ^[[36m^[[1m=========================== short test summary info ============================^[[0m ^[[31mFAILED^[[0m tests/basic_test.py::^[[1mUniqueTermTests::test_max_terminals^[[0m - TypeError: 'NoneType' object is not subscriptable ^[[31m========================= ^[[31m^[[1m1 failed^[[0m, ^[[32m8 passed^[[0m^[[31m in 38.35s^[[0m^[[31m =========================^[[0m INFO : Command's result: FAILURE INFO : Command's error: Command '['python3', '-m', 'pytest', '-vra']' returned non-zero exit status 1. python3-module-uv-0.6.16-alt1 Running `rustc --crate-name uv --edition=2021 crates/uv/src/bin/uv.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C opt-level=3 -C lto=fat '--warn=clippy::pedantic' '--allow=clippy::used_underscore_binding' --warn=unsafe_code --warn=unreachable_pub '--allow=clippy::too_many_lines' '--allow=clippy::too_many_arguments' '--allow=clippy::similar_names' '--warn=clippy::rest_pat_in_fully_bound_structs' '--warn=clippy::rc_mutex' '--warn=clippy::rc_buffer' '--warn=clippy::print_stdout' '--warn=clippy::print_stderr' '--allow=clippy::must_use_candidate' '--allow=clippy::module_name_repetitions' '--allow=clippy::missing_panics_doc' '--allow=clippy::missing_errors_doc' '--allow=clippy::match_same_arms' '--allow=clippy::map_unwrap_or' '--allow=clippy::large_stack_arrays' '--allow=clippy::implicit_hasher' '--allow=clippy::if_not_else' '--warn=clippy::get_unwrap' '--warn=clippy::exit' '--warn=clippy::empty_structs_with_brackets' '--warn=clippy::empty_drop' '--warn=clippy::dbg_macro' '--allow=clippy::collapsible_if' '--allow=clippy::collapsible_else_if' '--allow=clippy::char_lit_as_u8' --cfg 'feature="crates-io"' --cfg 'feature="default"' --cfg 'feature="git"' --cfg 'feature="performance"' --cfg 'feature="performance-memory-allocator"' --cfg 'feature="pypi"' --cfg 'feature="python"' --cfg 'feature="python-managed"' --cfg 'feature="slow-tests"' --cfg 'feature="test-ecosystem"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("axoupdater", "crates-io", "default", "git", "performance", "performance-memory-allocator", "pypi", "python", "python-managed", "python-patch", "self-update", "slow-tests", "test-ecosystem", "tracing-durations-export"))' -C metadata=0e616a23ba4a6944 -C extra-filename=-7562798b36e8b039 --out-dir /usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps -C strip=symbols -L dependency=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps --extern anstream=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libanstream-74e5143cca662811.rlib --extern anyhow=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libanyhow-c06973d918ab9642.rlib --extern clap=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libclap-c80788c4c1fb3fa7.rlib --extern console=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libconsole-438e5bc428bbb27f.rlib --extern ctrlc=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libctrlc-eda6930234bef254.rlib --extern dotenvy=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libdotenvy-48ea420679154c3f.rlib --extern flate2=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libflate2-09d5753467045a3f.rlib --extern fs_err=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libfs_err-6e9e194db9810693.rlib --extern futures=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libfutures-e1df96999c88520e.rlib --extern http=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libhttp-5ed0f8e3f9f20aa6.rlib --extern indicatif=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libindicatif-46ea79e263256edb.rlib --extern indoc=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libindoc-7c9871ab59fd0d09.so --extern itertools=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libitertools-733094f20c9379b1.rlib --extern jiff=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libjiff-13fc8fdfb7757f0e.rlib --extern miette=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libmiette-4c68da7219b302bc.rlib --extern nix=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libnix-b5e1a909690aa887.rlib --extern owo_colors=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libowo_colors-4f9b0bcf97028f58.rlib --extern petgraph=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libpetgraph-3df4244cee40ca8d.rlib --extern regex=/usr/src/RPM/BUILD/python3-module-uv-0.6.16/target/release/deps/libregex-1d hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded radiotray-ng-0.2.8-alt2 -- Detecting CXX compile features - done Package libidn2 was not found in the pkg-config search path. Perhaps you should add the directory containing `libidn2.pc' to the PKG_CONFIG_PATH environment variable Package 'libidn2', required by 'libcurl', not found Package libidn2 was not found in the pkg-config search path. Perhaps you should add the directory containing `libidn2.pc' to the PKG_CONFIG_PATH environment variable Package 'libidn2', required by 'libcurl', not found Package libidn2 was not found in the pkg-config search path. Perhaps you should add the directory containing `libidn2.pc' to the PKG_CONFIG_PATH environment variable Package 'libidn2', required by 'libcurl', not found Package libidn2 was not found in the pkg-config search path. Perhaps you should add the directory containing `libidn2.pc' to the PKG_CONFIG_PATH environment variable Package 'libidn2', required by 'libcurl', not found -- Found CURL: /usr/lib64/libcurl.so (found version "8.13.0") rxclient-1.0.1-alt1 checking for wxWidgets version >= 2.8.0 (--debug=no --unicode=yes --static=no)... no configure: error: Could not find wxWidgets library veracrypt-1.26.20-alt1 Precompiling SystemPrecompiled.h SystemPrecompiled.h:13:10: fatal error: wx/wx.h: No such file or directory 13 | #include <wx/wx.h> zed-0.184.10-alt1 Compiling zlog_settings v0.1.0 (/usr/src/RPM/BUILD/zed-0.184.10/crates/zlog_settings) hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded 17 error logs REMOVED from the list clementine-1.4.1.38-alt1.g1fc7fe0e1 fatresize-1.0.3-alt13 gnuplot-1:6.0.2-alt2 java-1.8.0-openjdk-0:1.8.0.452.b09-alt1 libtiff-4.7.0-alt1 liburing-2.9-alt1 lilo-24.2-alt3 perl-Math-MatrixReal-2.13-alt1_10 perl-Net-SIP-0.838-alt1 python3-module-cheroot-10.0.1-alt3 python3-module-easyprocess-1.1-alt2 python3-module-jsonschema-spec-0.2.4-alt1 qemu-9.2.3-alt1 redis-7.2.7-alt1 sysfsutils-2.1.1-alt2 tmux-3.5a-alt1 wxGTK3.0-3.0.5.1-alt5.20240531 Total 319 error logs.
reply other threads:[~2025-05-20 6:19 UTC|newest] Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=aCwe6UaukYSj0EW3@beehive.mskdc.altlinux.org \ --to=hiver@altlinux.org \ --cc=devel@lists.altlinux.org \ --cc=sisyphus-cybertalk@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Sisyphus cybertalk This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \ sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com public-inbox-index sisyphus-cybertalk Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk AGPL code for this site: git clone https://public-inbox.org/public-inbox.git