* [cyber] I: p10-20250518 x86_64 beehive_status: +10 -7 (77)
@ 2025-05-18 21:06 ALT beekeeper
0 siblings, 0 replies; only message in thread
From: ALT beekeeper @ 2025-05-18 21:06 UTC (permalink / raw)
To: sisyphus-cybertalk
10 NEW error logs
SNNS-4.3-alt1.1.1.1
ar rc lib3d.a net_analyzer.o d3_xUtils.o d3_global.o d3_anageo.o d3_shade.o d3_lists.o
d3_point.o d3_dither.o d3_zgraph.o d3_fonts.o d3_graph.o d3_draw.o d3_disp.o d3_move.o
d3_zValue.o d3_setup.o d3_units.o d3_links.o d3_model.o d3_project.o d3_light.o
d3_pannels.o d3_main.o bn_bignet.o bn_basics.o bn_art1.o bn_art2.o bn_artmap.o
bn_TD_bignet.o bn_kohonen.o bn_assoz.o o_graph.o bn_JordElm.o ui_class.o bn_bighop.o
ranlib lib3d.a
make[1]: Leaving directory '/usr/src/RPM/BUILD/SNNSv4.3/xgui/sources'
make[1]: Entering directory '/usr/src/RPM/BUILD/SNNSv4.3/xgui/sources'
x86_64-alt-linux-gcc libxgui1.a libxgui2.a lib3d.a \
-lXaw3d -lXmu -lXt -lXext -lSM -lICE -lX11 \
../../kernel/sources/libkernel.a ../../kernel/sources/libfunc.a -lm -lfl -o xgui
ld: libxgui1.a(ui_controlP.o): in function `ui_rem_performPrunInit':
/usr/src/RPM/BUILD/SNNSv4.3/xgui/sources/ui_controlP.c:1191: warning: the use of
`tempnam' is dangerous, better use `mkstemp'
make[1]: Leaving directory '/usr/src/RPM/BUILD/SNNSv4.3/xgui/sources'
glibc-6:2.32-alt5.p10.4
UNSUPPORTED: sunrpc/tst-svc_register
FAIL: time/tst-cpuclock1
Summary of test results:
--
+ rc=2
+ grep '^FAIL:' build-x86_64-linux/tests.sum
+ cut '-d ' -f2-
--
==> build-x86_64-linux/time/tst-cpuclock1.test-result <==
FAIL: time/tst-cpuclock1
original exit status 1
guile-ncurses-3.0-alt1
PASS: menu_equal.scm
FAIL: menu_gc_refcount.scm
PASS: menu_gc_refcount_2.scm
--
# SKIP: 31
# XFAIL: 0
# FAIL: 1
# XPASS: 0
# ERROR: 0
See test/test-suite.log
os-autoinst-4.6-alt14
test-doc-testapi-spellchecking
67% tests passed, 1 tests failed out of 3
Total Test time (real) = 115.72 sec
The following tests FAILED:
3 - test-perl-testsuite (Failed)
--
Use "--rerun-failed --output-on-failure" to re-run the failed cases verbosely.
FAILED: CMakeFiles/check-pkg-build
/usr/src/RPM/BUILD/os-autoinst-4.6/x86_64-alt-linux/CMakeFiles/check-pkg-build
cd /usr/src/RPM/BUILD/os-autoinst-4.6/x86_64-alt-linux && /usr/bin/ctest -V -E
test-local-.*
perl-Server-Starter-0.35-alt1.1
stop_server (pid:3228939) stopping now (pid:3229135)...
hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded
php8.1-memcache-8.2-alt8.1.32.alt1
Time taken : 14 seconds
FAILED TEST SUMMARY
memcache->flush() with time in future [tests/100c.phpt]
redis-6.2.17-alt1
killing stale instance 1526038
killing stale instance 1607084
killing stale instance 1685315
killing stale instance 2067286
killing stale instance 2067744
killing stale instance 2507293
killing stale instance 2568765
error: Bad exit status from /usr/src/tmp/rpm-tmp.90995 (%check)
RPM build errors:
File /usr/src/RPM/SOURCES/redis-6.2.17-alt1.patch is smaller than 8 bytes
slicer-4.11.20210226-alt3.1
find-requires: running scripts
(cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,qml,rpmlib,shebang,shell,static,symlinks,systemd-services,typelib)
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/qSlicerTemplateKeyModule.h:22:10:
fatal error: qSlicerLoadableModule.h: No such file or directory
22 | #include "qSlicerLoadableModule.h"
--
cpp.req:
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/qSlicerTemplateKeyModule.h:
cpp failed, trying c++ mode
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/qSlicerTemplateKeyModule.h:22:10:
fatal error: qSlicerLoadableModule.h: No such file or directory
22 | #include "qSlicerLoadableModule.h"
--
cpp.req: WARNING:
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/qSlicerTemplateKeyModule.h:
cpp failed
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/qSlicerTemplateKeyModuleWidget.h:22:10:
fatal error: qSlicerAbstractModuleWidget.h: No such file or directory
22 | #include "qSlicerAbstractModuleWidget.h"
--
cpp.req:
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/qSlicerTemplateKeyModuleWidget.h:
cpp failed, trying c++ mode
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/qSlicerTemplateKeyModuleWidget.h:22:10:
fatal error: qSlicerAbstractModuleWidget.h: No such file or directory
22 | #include "qSlicerAbstractModuleWidget.h"
--
cpp.req: WARNING:
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/qSlicerTemplateKeyModuleWidget.h:
cpp failed
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/Logic/vtkSlicerTemplateKeyLogic.h:28:10:
fatal error: vtkSlicerModuleLogic.h: No such file or directory
28 | #include "vtkSlicerModuleLogic.h"
--
cpp.req:
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/Logic/vtkSlicerTemplateKeyLogic.h:
cpp failed, trying c++ mode
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/Logic/vtkSlicerTemplateKeyLogic.h:28:10:
fatal error: vtkSlicerModuleLogic.h: No such file or directory
28 | #include "vtkSlicerModuleLogic.h"
--
cpp.req: WARNING:
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/Logic/vtkSlicerTemplateKeyLogic.h:
cpp failed
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/Widgets/qSlicerTemplateKeyFooBarWidget.h:25:10:
fatal error: QWidget: No such file or directory
25 | #include <QWidget>
--
cpp.req:
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/Widgets/qSlicerTemplateKeyFooBarWidget.h:
cpp failed, trying c++ mode
/usr/src/tmp/slicer-buildroot/usr/lib64/Slicer-4.11/share/Slicer-4.11/Wizard/Templates/Modules/Loadable/Widgets/qSlicerTemplateKeyFooBarWidget.h:25:10:
fatal error: QWidget: No such file or directory
25 | #include <QWidget>
--
lib.req: WARNING:
/usr/src/tmp/slicer-buildroot/usr/lib64/libqSlicerBaseQTCore.so.4.11.20210226: overlinked
libraries: /usr/lib64/libOpenGL.so.0
hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded
toppler-1.3-alt1
( cd _build && gimp -i -b "(let* ((image (car(gimp-xcf-load 1 \"../datafile/font.xcf\"
\"ttt\")))(layers (cadr(gimp-image-get-layers image))))(file-png-save-defaults 1 image
(aref layers 0) \"font_mask_rgb.png\" \"ttt\")(gimp-quit 1))" )
error: Cannot create folder '/usr/src/.config/gimp/2.10/brushes': File exists
make: *** [Makefile:131: _build/font.dat] Error 1
--
warnings.warn(str(e), _gtk.Warning)
gimp: GEGL-WARNING:
(../gegl/buffer/gegl-tile-handler-cache.c:1076):gegl_tile_cache_destroy: runtime check
failed: (g_queue_is_empty (&cache_queue))
To debug GeglBuffer leaks, set the environment variable GEGL_DEBUG to "buffer-alloc"
--
( cd _build && gimp -i -b "(let* ((image (car(gimp-xcf-load 1 \"../datafile/scroller.xcf\"
\"ttt\")))(layers (cadr(gimp-image-get-layers image))))(file-png-save-defaults 1 image
(aref layers 1) \"scr2_colors_rgb.png\" \"ttt\")(gimp-quit 1))" )
gimp: GEGL-WARNING:
(../gegl/buffer/gegl-tile-handler-cache.c:1076):gegl_tile_cache_destroy: runtime check
failed: (g_queue_is_empty (&cache_queue))
To debug GeglBuffer leaks, set the environment variable GEGL_DEBUG to "buffer-alloc"
--
( cd _build && gimp -i -b "(let* ((image (car(gimp-xcf-load 1 \"../datafile/scroller.xcf\"
\"ttt\")))(layers (cadr(gimp-image-get-layers image))))(file-png-save-defaults 1 image
(aref layers 2) \"scr3_colors_rgb.png\" \"ttt\")(gimp-quit 1))" )
gimp: GEGL-WARNING:
(../gegl/buffer/gegl-tile-handler-cache.c:1076):gegl_tile_cache_destroy: runtime check
failed: (g_queue_is_empty (&cache_queue))
To debug GeglBuffer leaks, set the environment variable GEGL_DEBUG to "buffer-alloc"
--
( cd _build && gimp -i -b "(let* ((image (car(gimp-xcf-load 1 \"../datafile/scroller.xcf\"
\"ttt\")))(layers (cadr(gimp-image-get-layers image))))(file-png-save-defaults 1 image
(aref layers 3) \"scr1_mask_rgb.png\" \"ttt\")(gimp-quit 1))" )
gimp: GEGL-WARNING:
(../gegl/buffer/gegl-tile-handler-cache.c:1076):gegl_tile_cache_destroy: runtime check
failed: (g_queue_is_empty (&cache_queue))
To debug GeglBuffer leaks, set the environment variable GEGL_DEBUG to "buffer-alloc"
--
( cd _build && gimp -i -b "(let* ((image (car(gimp-xcf-load 1 \"../datafile/scroller.xcf\"
\"ttt\")))(layers (cadr(gimp-image-get-layers image))))(file-png-save-defaults 1 image
(aref layers 4) \"scr2_mask_rgb.png\" \"ttt\")(gimp-quit 1))" )
gimp: GEGL-WARNING:
(../gegl/buffer/gegl-tile-handler-cache.c:1076):gegl_tile_cache_destroy: runtime check
failed: (g_queue_is_empty (&cache_queue))
To debug GeglBuffer leaks, set the environment variable GEGL_DEBUG to "buffer-alloc"
--
( cd _build && gimp -i -b "(let* ((image (car(gimp-xcf-load 1 \"../datafile/scroller.xcf\"
\"ttt\")))(layers (cadr(gimp-image-get-layers image))))(file-png-save-defaults 1 image
(aref layers 5) \"scr3_mask_rgb.png\" \"ttt\")(gimp-quit 1))" )
gimp: GEGL-WARNING:
(../gegl/buffer/gegl-tile-handler-cache.c:1076):gegl_tile_cache_destroy: runtime check
failed: (g_queue_is_empty (&cache_queue))
To debug GeglBuffer leaks, set the environment variable GEGL_DEBUG to "buffer-alloc"
yazi-0.4.2-alt2
Running
`/usr/src/RPM/BUILD/yazi-0.4.2/target/release/build/mlua-sys-2408890e0bfbe1ac/build-script-main`
error: rustc interrupted by SIGSEGV, printing backtrace
/usr/lib64/librustc_driver-fad0618485e29b38.so(+0x7d9876)[0x7f1e1f86f876]
--
note: backtrace dumped due to SIGSEGV! resuming signal
error: could not compile `exr` (lib)
Caused by:
7 error logs REMOVED from the list
automake_1.11-1.11.6-alt9
libaom-3.1.1-alt1
lightdm-1.30.0-alt24
php7-7.4.33-alt1
python3-module-simple_timer-0.2-alt2
vaultwarden-1.33.0-alt0.p10.1
zstd-1.5.5-alt2
Total 77 error logs.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2025-05-18 21:06 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-05-18 21:06 [cyber] I: p10-20250518 x86_64 beehive_status: +10 -7 (77) ALT beekeeper
ALT Linux Sisyphus cybertalk
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \
sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com
public-inbox-index sisyphus-cybertalk
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git