From: ALT beekeeper <hiver@altlinux.org>
To: sisyphus-cybertalk@lists.altlinux.org
Subject: [cyber] I: Sisyphus-20250423 x86_64 beehive_status: +14 -12 (332)
Date: Wed, 23 Apr 2025 06:25:24 +0000
Message-ID: <aAiH1CQ9YTjqRw2R@beehive.mskdc.altlinux.org> (raw)
14 NEW error logs
auditd-plugin-clickhouse-lite-0.1.8-alt2
test/dbtest/plugin_test.py ..
hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded
azure-sdk-for-ruby-20200316-alt1.6
Setup::Loader.load_file.chdir > Errno::ENOTDIR: Not a directory @ rb_sysopen -
/usr/src/RPM/BUILD/azure-sdk-for-ruby-20200316/Rakefile/config/GEM_VERSIONS
Setup::Loader.load_file > LoadError: cannot load such file -- dotenv/tasks
[setup.rb][INFO]> Source list are the following:
--
[setup.rb][INFO]> V *azure_mgmt_recovery_services_site_recovery:0.17.2
[/usr/src/RPM/BUILD/azure-sdk-for-ruby-20200316/management/azure_mgmt_recovery_services_site_recovery/azure_mgmt_recovery_services_site_recovery.gemspec]
hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded
blender4.4-4.4.1-alt1
[4268/7133] : && /usr/bin/cmake -E rm -f
lib/libextern_mantaflow.a && /usr/bin/ar qc lib/libextern_mantaflow.a
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/commonkernels.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/conjugategrad.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/conjugategrad.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/edgecollapse.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/edgecollapse.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/fastmarch.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/fastmarch.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/fileio/iogrids.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/fileio/iomeshes.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/fileio/ioparticles.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/fileio/ioutil.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/fileio/iovdb.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/fileio/mantaio.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/fileio/mantaio.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/fluidsolver.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/fluidsolver.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/general.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/general.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/grid.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/grid.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/grid4d.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/grid4d.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/kernel.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/kernel.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/levelset.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/levelset.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/mesh.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/mesh.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/movingobs.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/movingobs.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/multigrid.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/multigrid.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/noisefield.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/noisefield.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/particle.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/particle.h.reg.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/plugin/advection.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/plugin/apic.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/plugin/extforces.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/plugin/fire.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/plugin/flip.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/plugin/fluidguiding.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/plugin/initplugins.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/plugin/kepsilon.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/plugin/meshplugins.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/plugin/pressure.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/plugin/ptsplugins.cpp.o
extern/mantaflow/CMakeFiles/extern_mantaflow.dir/preprocessed/plugin/secondaryparticles.cpp.o
extern/mantaflow/CMakeFiles/extern_mant
hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded
dropbear-2025.87-alt1
> sock.connect(sa)
E ConnectionRefusedError: [Errno 111] Connection refused
/usr/lib64/python3.12/socket.py:850: ConnectionRefusedError
--
[289] Apr 23 04:50:26 Pubkey auth succeeded for 'root' with ecdsa-sha2-nistp256 key
SHA256:I/o0tVq/xrK7O8JNYCh83Kzev1WFOVdw98tbinBrbNo from 127.0.0.1:56774
[290] Apr 23 04:50:26 lastlog_perform_login: Couldn't stat /var/log/lastlog: No such
file or directory
[290] Apr 23 04:50:26 lastlog_openseek: /var/log/lastlog is not a file or directory!
[289] Apr 23 04:50:26 Exit (root) from <127.0.0.1:56774>: Exited normally
[289] Apr 23 04:50:26 syslogin_perform_logout: logout(pts/1) returned an error: No such
file or directory
[293] Apr 23 04:50:26 Child connection from 127.0.0.1:56784
--
[298] Apr 23 04:50:26 Pubkey auth succeeded for 'root' with ecdsa-sha2-nistp256 key
SHA256:I/o0tVq/xrK7O8JNYCh83Kzev1WFOVdw98tbinBrbNo from 127.0.0.1:56794
[299] Apr 23 04:50:26 lastlog_perform_login: Couldn't stat /var/log/lastlog: No such
file or directory
[299] Apr 23 04:50:26 lastlog_openseek: /var/log/lastlog is not a file or directory!
[298] Apr 23 04:50:26 Exit (root) from <127.0.0.1:56794>: Exited normally
[298] Apr 23 04:50:26 syslogin_perform_logout: logout(pts/2) returned an error: No such
file or directory
[302] Apr 23 04:50:26 Child connection from 127.0.0.1:56798
--
[308] Apr 23 04:50:26 Pubkey auth succeeded for 'root' with ecdsa-sha2-nistp256 key
SHA256:I/o0tVq/xrK7O8JNYCh83Kzev1WFOVdw98tbinBrbNo from 127.0.0.1:56806
[309] Apr 23 04:50:26 lastlog_perform_login: Couldn't stat /var/log/lastlog: No such
file or directory
[309] Apr 23 04:50:26 lastlog_openseek: /var/log/lastlog is not a file or directory!
[308] Apr 23 04:50:26 Exit (root) from <127.0.0.1:56806>: Exited normally
[308] Apr 23 04:50:26 syslogin_perform_logout: logout(pts/3) returned an error: No such
file or directory
[312] Apr 23 04:50:26 Child connection from 127.0.0.1:56818
--
[317] Apr 23 04:50:26 Pubkey auth succeeded for 'root' with ecdsa-sha2-nistp256 key
SHA256:I/o0tVq/xrK7O8JNYCh83Kzev1WFOVdw98tbinBrbNo from 127.0.0.1:56826
[318] Apr 23 04:50:26 lastlog_perform_login: Couldn't stat /var/log/lastlog: No such
file or directory
[318] Apr 23 04:50:26 lastlog_openseek: /var/log/lastlog is not a file or directory!
[317] Apr 23 04:50:26 Exit (root) from <127.0.0.1:56826>: Exited normally
[317] Apr 23 04:50:26 syslogin_perform_logout: logout(pts/4) returned an error: No such
file or directory
[321] Apr 23 04:50:26 Child connection from 127.0.0.1:56842
--
[326] Apr 23 04:50:26 Pubkey auth succeeded for 'root' with ecdsa-sha2-nistp256 key
SHA256:I/o0tVq/xrK7O8JNYCh83Kzev1WFOVdw98tbinBrbNo from 127.0.0.1:56852
[327] Apr 23 04:50:26 lastlog_perform_login: Couldn't stat /var/log/lastlog: No such
file or directory
[327] Apr 23 04:50:26 lastlog_openseek: /var/log/lastlog is not a file or directory!
fprintd-1.94.5-alt1
Summary of Failures:
41/557 fprintd:daemon+fprintd+FPrintdVirtualDeviceClaimedTest /
FPrintdVirtualDeviceClaimedTest.test_busy_device_release_on_verify
TIMEOUT 30.11s exit status 1
345/557 fprintd:daemon+fprintd+FPrintdVirtualDeviceStorageIdentificationTests /
FPrintdVirtualDeviceStorageIdentificationTests.test_verify_error_not_supported
TIMEOUT 30.11s exit status 1
Ok: 555
Expected Fail: 0
Fail: 0
Unexpected Pass: 0
Skipped: 0
Timeout: 2
Full log written to
/usr/src/RPM/BUILD/fprintd-1.94.5/x86_64-alt-linux/meson-logs/testlog.txt
glog-0.7.1-alt1
26/26 Test #26: dcheck_off .......................***Not Run (Disabled) 0.00 sec
96% tests passed, 1 tests failed out of 23
Total Test time (real) = 13.52 sec
--
26 - dcheck_off (Disabled)
The following tests FAILED:
2 - logging (SIGPIPE)
gnuplot-1:6.0.2-alt2
make[1]: Leaving directory '/usr/src/RPM/BUILD/gnuplot-6.0.2/docs'
make[1]: Entering directory '/usr/src/RPM/BUILD/gnuplot-6.0.2/docs'
x86_64-alt-linux-gcc -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -lcerf -o
doc2tex doc2tex-doc2tex.o doc2tex-termdoc.o -lm -lopenspecfun -lcerf -lz -lpangocairo-1.0
-lpango-1.0 -lgobject-2.0 -lharfbuzz -lcairo -lglib-2.0
make[1]: Leaving directory '/usr/src/RPM/BUILD/gnuplot-6.0.2/docs'
make[1]: *** Deleting file 'gnuplot.tex'
make[1]: Entering directory '/usr/src/RPM/BUILD/gnuplot-6.0.2/docs'
./doc2tex -figures ./gnuplot.doc gnuplot.tex
make[1]: *** [Makefile:1099: gnuplot.tex] Segmentation fault
make[1]: Leaving directory '/usr/src/RPM/BUILD/gnuplot-6.0.2/docs'
make: *** [Makefile:1102: pdf] Error 2
java-1.8.0-openjdk-0:1.8.0.442.b06-alt1_1jpp8
RPM build errors:
Unparseable macro: % by %%)
Macro %z not found
ignored self-provides: java-1.8.0-openjdk = 0:1.8.0.442.b06-alt1_1jpp8
ignored self-provides: java-1.8.0-openjdk-headless = 0:1.8.0.442.b06-alt1_1jpp8
ignored self-provides: java-1.8.0-openjdk-devel = 0:1.8.0.442.b06
ignored self-provides: java-1.8.0-openjdk-demo = 0:1.8.0.442.b06-alt1_1jpp8
ignored self-provides: java-1.8.0-openjdk-src = 0:1.8.0.442.b06-alt1_1jpp8
ignored self-provides: java-1.8.0-openjdk-javadoc = 0:1.8.0.442.b06-alt1_1jpp8
Unparseable macro: %.*}"
libsecret-0.21.7-alt1
24/24 libsecret:libsecret / test-service OK 21.06s
Summary of Failures:
20/24 libsecret:libsecret / test-collection FAIL 8.74s (exit status
133 or signal 5 SIGTRAP)
Ok: 23
Expected Fail: 0
Fail: 1
Unexpected Pass: 0
Skipped: 0
Timeout: 0
Full log written to
/usr/src/RPM/BUILD/libsecret-0.21.7/x86_64-alt-linux/meson-logs/testlog.txt
python-2.7.18-alt11
self._sslobj.do_handshake()
SSLZeroReturnError: TLS/SSL connection has been closed (EOF) (_ssl.c:735)
Exception in thread Thread-75:
--
self._sslobj.do_handshake()
SSLZeroReturnError: TLS/SSL connection has been closed (EOF) (_ssl.c:735)
Exception in thread Thread-76:
--
self._sslobj.do_handshake()
SSLZeroReturnError: TLS/SSL connection has been closed (EOF) (_ssl.c:735)
Exception in thread Thread-77:
--
self._sslobj.do_handshake()
SSLZeroReturnError: TLS/SSL connection has been closed (EOF) (_ssl.c:735)
Exception in thread Thread-78:
--
self._sslobj.do_handshake()
SSLZeroReturnError: TLS/SSL connection has been closed (EOF) (_ssl.c:735)
Exception in thread Thread-79:
--
self._sslobj.do_handshake()
SSLZeroReturnError: TLS/SSL connection has been closed (EOF) (_ssl.c:735)
Exception in thread Thread-80:
--
self._sslobj.do_handshake()
SSLZeroReturnError: TLS/SSL connection has been closed (EOF) (_ssl.c:735)
Warning -- asyncore.socket_map was modified by test_ftplib
python3-module-sanic-24.12.0-alt1
=========================== short test summary info ============================
FAILED tests/test_tls.py::test_logger_vhosts - sanic.exceptions.ServerError: ...
FAILED tests/test_tls.py::test_ssl_in_multiprocess_mode - assert ('sanic.root...
= 2 failed, 1660 passed, 19 skipped, 14 deselected, 3 xfailed, 6 xpassed, 182 warnings
in 206.15s (0:03:26) =
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest', '-k', 'not
test_websocket_route_with_subprotocols and not test_keep_alive_client_timeout and not
test_multiprocessing']' returned non-zero exit status 1.
python3-module-zmq-26.4.0-alt1
_zmq.py:1123: in zmq.backend.cython._zmq.Socket.send
E zmq.error.ZMQError: Socket operation on non-socket
_zmq.py:1268: ZMQError
--
_zmq.py:1123: in zmq.backend.cython._zmq.Socket.send
E zmq.error.ZMQError: Socket operation on non-socket
_zmq.py:1268: ZMQError
--
_zmq.py:1123: in zmq.backend.cython._zmq.Socket.send
E zmq.error.ZMQError: Socket operation on non-socket
_zmq.py:1268: ZMQError
--
=========================== short test summary info ============================
FAILED tests/test_log.py::TestPubLog::test_blank_root_topic - TimeoutError: T...
FAILED tests/test_log.py::TestPubLog::test_custom_debug_formatter - zmq.error...
FAILED tests/test_log.py::TestPubLog::test_custom_global_formatter - zmq.erro...
FAILED tests/test_log.py::TestPubLog::test_custom_message_type - zmq.error.ZM...
FAILED tests/test_log.py::TestPubLog::test_init_iface - zmq.error.ZMQError: S...
FAILED tests/test_log.py::TestPubLog::test_init_socket - zmq.error.ZMQError: ...
FAILED tests/test_log.py::TestPubLog::test_root_topic - zmq.error.ZMQError: S...
FAILED tests/test_log.py::TestPubLog::test_set_info_formatter_via_property - ...
srt-1.5.4-alt2
[ PASSED ] 267 tests.
[ FAILED ] 1 test, listed below:
[ FAILED ] TestFEC.ConnectionFull2
1 FAILED TEST
YOU HAVE 6 DISABLED TESTS
vtk-9.4.2-alt1
/usr/bin/gmake -f Utilities/Doxygen/CMakeFiles/DoxygenDoc.dir/build.make
Utilities/Doxygen/CMakeFiles/DoxygenDoc.dir/build
hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded
12 error logs REMOVED from the list
autogen-5.18.16-alt1
cppcheck-2.16.2-alt1_1_1f61c2e8d
guile22-2.2.7-alt1
ldns-1.8.4-alt1
php8.4-pcntl-8.4.5-alt1
python3-module-execnet-2.1.1-alt1
python3-module-fastapi-0.115.12-alt1
python3-module-ffc-1:2019.1.0-alt2
python3-module-hypothesis-jsonschema-0.23.1-alt1
python3-module-pytest-httpbin-2.1.0-alt1
python3-module-sanic-24.6.0-alt2
telnet-3.0-alt10
Total 332 error logs.
reply other threads:[~2025-04-23 6:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aAiH1CQ9YTjqRw2R@beehive.mskdc.altlinux.org \
--to=hiver@altlinux.org \
--cc=devel@lists.altlinux.org \
--cc=sisyphus-cybertalk@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Sisyphus cybertalk
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \
sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com
public-inbox-index sisyphus-cybertalk
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git