From: ALT beekeeper <hiver@altlinux.org> To: sisyphus-cybertalk@lists.altlinux.org Subject: [cyber] I: Sisyphus-20230902 i586 beehive_status: +35 -33 (208) Date: Sat, 2 Sep 2023 08:31:33 +0000 Message-ID: <ZPLy5alxrWtpwu7D@beehive.mskdc.altlinux.org> (raw) 35 NEW error logs NetworkManager-1.44.0-alt1 PASS: src/core/tests/config/test-config 7 /config/warnings ERROR: src/core/tests/config/test-config - too few tests run (expected 14, got 7) ERROR: src/core/tests/config/test-config - exited with status 5 PASS: src/core/tests/test-core 1 /general/test_config_h -- # SKIP: 10 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 2 See ./test-suite.log aqualung-1.1-alt2 checking for jack_on_info_shutdown in -ljack... no configure: error: JACK support requires libjack arcclock-1.2.1-alt1 of sources.list E: Package GraphicsMagick-ImageMagick-compat has no installation candidate hsh-install: Failed to calculate package file list. auditd-plugin-clickhouse-lite-0.1.6-alt1 # AuditDataRaw: 600 (1) # 0a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d271 # < type=EXECVE msg=audit(1662154135.634:25523): a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ok 14 auditd-plugin-clickhouse slowcat 1ms ok 15 auditd-plugin-clickhouse slowcat 10ms ok 16 auditd-plugin-clickhouse syslog ok 17 auditd-plugin-clickhouse min-bench ok 18 auditd-plugin-clickhouse def-bench blockout2-2.5-alt2 + install -p -m 644 BlockOutII-16x16.png /usr/src/tmp/blockout2-buildroot/usr/share/icons/hicolor/16x16/apps/BlockOutII.png /bin/install: cannot stat 'BlockOutII-16x16.png': No such file or directory canl-java-2.8.2-alt1_1jpp11 2) got result: OK 3) got result: FAILED The following validation errors were found: error at position 0 in chain, problematic certificate subject: CN=User1,O=EMITest,C=EU (category: NAMESPACE): Namespace definition for the certificate issuer (CN=The root CA1,O=EMITest,C=EU) is not defined, and namespaces are configured to be required. 4) got result: OK 5) got result: FAILED The following validation errors were found: error at position 0 in chain, problematic certificate subject: CN=User1,O=EMITest,C=EU (category: NAMESPACE): Namespace definition for the certificate issuer (CN=The root CA1,O=EMITest,C=EU) is not defined, and namespaces are configured to be required. 6) got result: FAILED The following validation errors were found: error at position 0 in chain, problematic certificate subject: CN=User1,O=EMITest,C=EU (category: NAMESPACE): Namespace definition for the certificate issuer (CN=The root CA1,O=EMITest,C=EU) is not defined, and namespaces are configured to be required. -- 8) got result: OK 9) got result: FAILED The following validation errors were found: error at position 0 in chain, problematic certificate subject: CN=User1,O=EMITest,C=EU (category: NAMESPACE): Namespace definition for the certificate issuer (CN=The root CA1,O=EMITest,C=EU) is not defined, and namespaces are configured to be required. 10) got result: FAILED The following validation errors were found: error at position 0 in chain, problematic certificate subject: CN=User1,O=EMITest,C=EU (category: NAMESPACE): Namespace definition for the certificate issuer (CN=The root CA1,O=EMITest,C=EU) is not defined, and namespaces are configured to be required. -- 9) got result: OK 10) got result: FAILED The following validation errors were found: error at position 0 in chain, problematic certificate subject: CN=User1,O=EMITest,C=EU (category: NAMESPACE): Namespace definition for the certificate issuer (CN=The root CA1,O=EMITest,C=EU) is not defined, and namespaces are configured to be required. -- 5) got result: OK 6) got result: FAILED The following validation errors were found: error at position 0 in chain, problematic certificate subject: CN=User1,O=EMITest,C=EU (category: NAMESPACE): Namespace definition for the certificate issuer (CN=The root CA1,O=EMITest,C=EU) is not defined, and namespaces are configured to be required. -- 0) got result: OK 1) got result: FAILED The following validation errors were found: error at position 0 in chain, problematic certificate subject: CN=User1,O=EMITest,C=EU (category: NAMESPACE): The certificate subject CN=User1,O=EMITest,C=EU is not accepted by any rule of the the relevant namespace policies. Policies which matches the issuer are: /usr/src/RPM/BUILD/canl-java-canl-2.8.2/target/test-tmp/openssl-nsTest/77ab7b18.namespaces:1 2) got result: FAILED The following validation errors were found: error at position 0 in chain, problematic certificate subject: CN=User1,O=EMITest,C=EU (category: NAMESPACE): The certificate subject CN=User1,O=EMITest,C=EU is not accepted by any rule of the the relevant namespace policies. Policies which matches the issuer are: /usr/src/RPM/BUILD/canl-java-canl-2.8.2/target/test-tmp/openssl-nsTest/77ab7b18.namespaces:1 3) got result: FAILED The following validation errors were found: error at position 0 in chain, problematic certificate subject: CN=User1,O=EMITest,C=EU (category: NAMESPACE): The certificate subject CN=User1,O=EMITest,C=EU is not accepted by any rule of the the relevant namespace policies. Policies which matches the issuer are: /usr/src/RPM/BUILD/canl-java-canl-2.8.2/target/test-tmp/openssl-nsTest/77ab7b18.namespaces:1 coolreader3-3.2.59-alt1 rpm-build-licenses is already the newest version. E: Couldn't find package libtextstyle-devel hsh-install: Failed to calculate package file list. featherpad-1.4.1-alt1 of sources.list E: Package GraphicsMagick-ImageMagick-compat has no installation candidate hsh-install: Failed to calculate package file list. ffmpeg-2:4.4.4-alt1 ./libavcodec/x86/mathops.h: Assembler messages: ./libavcodec/x86/mathops.h:125: Error: operand type mismatch for `shr' make: *** [ffbuild/common.mak:67: libavformat/adtsenc.o] Error 1 ffmpeg-plugin-browser-114-alt1 libavcodec/x86/mathops.h: Assembler messages: libavcodec/x86/mathops.h:125: Error: operand type mismatch for `shr' make: *** [ffbuild/common.mak:81: libavcodec/aac_adtstoasc_bsf.o] Error 1 -- libavcodec/x86/mathops.h: Assembler messages: libavcodec/x86/mathops.h:125: Error: operand type mismatch for `shr' make: *** [ffbuild/common.mak:81: libavcodec/4xm.o] Error 1 -- libavcodec/x86/mathops.h: Assembler messages: libavcodec/x86/mathops.h:125: Error: operand type mismatch for `shr' make: *** [ffbuild/common.mak:81: libavcodec/aacdec.o] Error 1 geonkick-2.9.2-alt1 inlined from 'setPreviewSample' at /usr/src/RPM/BUILD/geonkick-2.9.2/src/SampleBrowser.cpp:208:85: /usr/src/RPM/BUILD/geonkick-2.9.2/dsp/src/geonkick.c:1790:53: warning: '__atomic_load_4' writing 4 bytes into a region of size 0 overflows the destination [-Wstringop-overflow=] 1790 | gkick_buffer_set_data((struct gkick_buffer*)output->updated_buffer, data, size); In member function 'setPreviewSample': lto1: note: destination object is likely at address zero gmake[2]: Leaving directory '/usr/src/RPM/BUILD/geonkick-2.9.2/i586-alt-linux' gmake[1]: Entering directory '/usr/src/RPM/BUILD/geonkick-2.9.2/i586-alt-linux' [100%] Built target geonkick_lv2 gmake[1]: Leaving directory '/usr/src/RPM/BUILD/geonkick-2.9.2/i586-alt-linux' gmake: *** [Makefile:136: all] Error 2 git-2.33.8-alt1 ok 13 - re-commit a removed filename which remains in CVS attic ok 14 - commit a file with leading spaces in the name ok 15 - use the same checkout for Git and CVS # passed all 15 test(s) 1..15 make[2]: Leaving directory '/usr/src/RPM/BUILD/git-2.33.8-alt1/t' make[2]: Target 'aggregate-results-and-cleanup' not remade because of errors. make[1]: *** [Makefile:44: test] Error 2 make[1]: Target 'all' not remade because of errors. make: *** [Makefile:2888: test] Error 2 gnustep-IMImage-2004-alt9 In file included from IMImageViewer.m:26: IMImageViewer.h:31:10: fatal error: wand/magick-wand.h: No such file or directory 31 | #include <wand/magick-wand.h> gnustep-gui-0.30.0-alt1 -o obj/libgnustep-gui.obj/GSImageMagickImageRep.m.o GSImageMagickImageRep.m:46:10: fatal error: magick/MagickCore.h: No such file or directory 46 | #include <magick/MagickCore.h> gpac-1:1.0.1-alt1 make[2]: Entering directory '/usr/src/RPM/BUILD/gpac-1.0.1/modules/jack' ld: cannot find -ljack: No such file or directory collect2: error: ld returned 1 exit status make[2]: *** [Makefile:28: gm_jack.so] Error 1 imagescan-3.65.0-alt5 doc-locate.cpp: In member function 'Magick::Geometry {anonymous}::locator::cropdoc() const': doc-locate.cpp:265:25: error: 'class Magick::Geometry' has no member named 'xNegative' 265 | if (clone.page ().xNegative ()) doc-locate.cpp:269:25: error: 'class Magick::Geometry' has no member named 'yNegative' 269 | if (clone.page ().yNegative ()) libgalago-0.5.2-alt1_20 gettext-tools is already the newest version. E: Couldn't find package libtextstyle-devel hsh-install: Failed to calculate package file list. librtaudio-5.2.0-alt1_1 checking for jack_client_open in -ljack... no configure: error: JACK support requires the jack library! librtmidi-4.0.0-alt1_1 checking for jack_client_open in -ljack... no configure: error: JACK support requires the jack library! librtmidi4-3.0.0-alt2_12 checking for jack_client_open in -ljack... no configure: error: JACK support requires the jack library! openvdb-9.0.0-alt2 ld: /usr/src/tmp/cc49lKSO.ltrans0.ltrans.o: access beyond end of merged section (664) collect2: error: ld returned 1 exit status gmake[2]: *** [openvdb/openvdb/CMakeFiles/openvdb_shared.dir/build.make:1320: openvdb/openvdb/libopenvdb.so.9.0.0] Error 1 pd-0.42.6-alt5_12 stdout.c: In function 'stdout_setup': stdout.c:47:48: warning: cast between incompatible function types from 'void * (*)(t_float)' {aka 'void * (*)(float)'} to 'void * (*)(void)' [-Wcast-function-type] 47 | stdout_class = class_new(gensym("stdout"), (t_newmethod)stdout_new, cc -shared -o stdout.pd_linux stdout.o -lc -lm rm -f stdout.o make[1]: Leaving directory '/usr/src/RPM/BUILD/pd-0.42-6/extra/stdout' make: Leaving directory '/usr/src/RPM/BUILD/pd-0.42-6/src' error: Bad exit status from /usr/src/tmp/rpm-tmp.29316 (%build) RPM build errors: Macro %cp not found perl-POE-Component-SSLify-1.012-alt1_17 t/simple_large.t .............. ok # Failed test 'SERVER: SSLify_Options 1886350: private key # at t/simple_parallel.t line 52. # Failed test 'SERVER: Server_SSLify Please do SSLify_Options() first ( or pass in a $ctx object ) at /usr/src/RPM/BUILD/POE-Component-SSLify-1.012/blib/lib/POE/Component/SSLify.pm line 247. # at t/simple_parallel.t line 55. -- t/simple_parallel.t (Wstat: 5632 Tests: 132 Failed: 2) Failed tests: 130-131 Non-zero exit status: 22 perl-Server-Starter-0.35-alt1.1 received TERM, sending TERM to all workers:2316647 hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded python3-module-django-picklefield-2.0.0-alt1 from django.utils.encoding import force_text ImportError: cannot import name 'force_text' from 'django.utils.encoding' (/usr/lib/python3/site-packages/django/utils/encoding.py) python3-module-oslo.rootwrap-7.0.1-alt1 {4} oslo_rootwrap.tests.test_functional_eventlet.RootwrapDaemonTest.test_graceful_death [1.854960s] ... ok {1} oslo_rootwrap.tests.test_functional_eventlet.RootwrapDaemonTest.test_daemon_cleanup_client [1.849765s] ... FAILED Captured traceback: -- raise self.failureException(msg) AssertionError: -9 == -9 : Server haven't stopped in one second Captured daemon_log: -- raise self.failureException(msg) AssertionError: -9 == -9 : Server haven't stopped in one second Captured daemon_log: qemu-checkinstall-2-alt1 1.34user 0.93system 0:01.88elapsed 120%CPU (0avgtext+0avgdata 151080maxresident)k 0inputs+0outputs (0major+9735minor)pagefaults 0swaps + toilet -f bigascii12 TCG + '[' -d /usr/lib/vm-run ']' + timeout 300 vm-run --tcg toilet -w222 'Native TCG OK' + time qemu-system-i386 -accel tcg -m 2047 -smp cores=4 -serial mon:stdio -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -kernel /boot/vmlinuz-6.4.13-un-def-alt1 -initrd /usr/src/tmp/initramfs-6.4.13-un-def-alt1.img -sandbox on,spawn=deny -bios bios.bin -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/usr/src/tmp/vm.FBSbatI1T7 no_timer_check' Command terminated by signal 11 4.84user 0.28system 0:04.73elapsed 108%CPU (0avgtext+0avgdata 152460maxresident)k 0inputs+0outputs (0major+17385minor)pagefaults 0swaps NOTICE: This is crash of qemu-system-i386, not of the Linux kernel! qtractor-0.9.31-alt1_1 -- Looking for aeffectx.h -- Looking for aeffectx.h - not found -- Looking for vestige.h -- Looking for vestige.h - found -- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.2") -- Checking for module 'jack>=0.100.0' -- Found jack, version 1.9.17 CMake Error at CMakeLists.txt:335 (message): *** JACK library not found. -- Configuring incomplete, errors occurred! rakarrack-0.6.2-alt6.git20140722 checking for main in -ljack... no configure: error: JACK library not found. rosegarden-21.06-alt1 /usr/bin/c++ -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic -Wall -Woverloaded-virtual -Wextra -Wformat-nonliteral -Wformat-security -Winit-self -Wswitch-enum -Wnon-virtual-dtor -Wno-long-long -ansi -Wundef -Wcast-align -Wchar-subscripts -W -Wpointer-arith -fno-check-new -fno-common -Werror=return-type -fvisibility=hidden -Wsuggest-override -O2 -DNDEBUG -rdynamic CMakeFiles/rosegarden.dir/rosegarden_autogen/mocs_compilation.cpp.o CMakeFiles/rosegarden.dir/gui/application/main.cpp.o -o ../rosegarden librosegardenprivate.a /usr/lib/libQt5PrintSupport.so.5.15.10 -lSM -lICE -lX11 -lXext /usr/lib/libQt5Widgets.so.5.15.10 /usr/lib/libQt5Gui.so.5.15.10 /usr/lib/libQt5Xml.so.5.15.10 /usr/lib/libQt5Network.so.5.15.10 /usr/lib/libQt5Core.so.5.15.10 -lz -ldl -llo -lpthread -llrdf -lfftw3f -lsamplerate -lsndfile -ljack -llirc_client -lasound ld: cannot find -ljack: No such file or directory collect2: error: ld returned 1 exit status gmake[2]: *** [src/CMakeFiles/rosegarden.dir/build.make:126: rosegarden] Error 1 rss_glx-0.9.1-alt9 checking for Wand >= 6.4... no configure: error: Package requirements (Wand >= 6.4) were not met: No package 'Wand' found Consider adjusting the PKG_CONFIG_PATH environment variable if you sbcl-2.3.7-alt1 ; compiling file "/usr/src/RPM/BUILD/sbcl-2.3.7/sbcl-2.3.7/src/compiler/bitops-derive-type.lisp" (written 03 AUG 2023 04:04:23 AM): ; caught ERROR: ; READ error during COMMON-LISP:COMPILE-FILE: -- ; compilation unit aborted ; caught 2 fatal ERROR conditions ; caught 1 ERROR condition 20.05user 1.84system 0:22.04elapsed 99%CPU (0avgtext+0avgdata 228848maxresident)k -- make: Entering directory '/usr/src/RPM/BUILD/sbcl-2.3.7/sbcl-2.3.7/src/runtime' GNUmakefile:41: genesis/Makefile.features: No such file or directory make: *** No rule to make target 'genesis/Makefile.features'. Stop. make: Leaving directory '/usr/src/RPM/BUILD/sbcl-2.3.7/sbcl-2.3.7/src/runtime' sonic-visualiser-4.5-alt1 [619/622] Linking target piper-vamp-simple-server FAILED: piper-vamp-simple-server c++ -o piper-vamp-simple-server piper-vamp-simple-server.p/meson-generated_.._piper.capnp.cpp.o piper-vamp-simple-server.p/piper-vamp-cpp_ext_json11_json11.cpp.o piper-vamp-simple-server.p/piper-vamp-cpp_vamp-server_simple-server.cpp.o piper-vamp-simple-server.p/vamp-plugin-sdk_src_vamp-hostsdk_PluginBufferingAdapter.cpp.o piper-vamp-simple-server.p/vamp-plugin-sdk_src_vamp-hostsdk_PluginChannelAdapter.cpp.o piper-vamp-simple-server.p/vamp-plugin-sdk_src_vamp-hostsdk_PluginHostAdapter.cpp.o piper-vamp-simple-server.p/vamp-plugin-sdk_src_vamp-hostsdk_PluginInputDomainAdapter.cpp.o piper-vamp-simple-server.p/vamp-plugin-sdk_src_vamp-hostsdk_PluginLoader.cpp.o piper-vamp-simple-server.p/vamp-plugin-sdk_src_vamp-hostsdk_PluginSummarisingAdapter.cpp.o piper-vamp-simple-server.p/vamp-plugin-sdk_src_vamp-hostsdk_PluginWrapper.cpp.o piper-vamp-simple-server.p/vamp-plugin-sdk_src_vamp-hostsdk_RealTime.cpp.o piper-vamp-simple-server.p/vamp-plugin-sdk_src_vamp-hostsdk_Files.cpp.o -Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic -Wl,--start-group -ldataquay -lrdf -lcapnp -lkj -lsord-0 -ldl -Wl,--end-group ld: /usr/lib/gcc/i586-alt-linux/13/../../../libsord-0.so: undefined reference to symbol 'serd_node_from_string' ld: /usr/lib/libserd-0.so.0: error adding symbols: DSO missing from command line collect2: error: ld returned 1 exit status [620/622] Linking target piper-convert stk-4.6.1-alt1 checking for jack_client_open in -ljack... no configure: error: JACK support requires the jack library! telepathy-glib-0.24.2-alt2 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 make[4]: Leaving directory '/usr/src/RPM/BUILD/telepathy-glib-0.24.2/tests' -- ../../build-aux/test-driver: line 112: 4044867 Aborted "$@" >> "$log_file" 2>&1 FAIL: test-cm PASS: test-cm-message -- # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 See tests/dbus/test-suite.log 33 error logs REMOVED from the list GraphicsMagick-1.3.40-alt1 atari++-1.85-alt1 cataclysm-dda-0.F.3-alt3 conky-1.19.2-alt1 crash-8.0.3-alt1 dialog-1.3.20171209-alt2 dino-0.4.3-alt1 docbook-to-man-2.0.0-alt1.qa2 eppic-4.0.0.13.gdc60e00-alt3 gettext-0.21-alt1 gwenhywfar-5.10.2-alt1 iptraf-ng-1.2.1-alt2 kf5-kwallet-5.108.0-alt1 libgranite7-7.3.0-alt1 mosh-1.4.0-alt1 mumps-5.3.5-alt3 ncdc-1.20-alt2 nsnake-3.0.1-alt1.gitd018237 ocfs2-tools-1.8.7-alt2 p7zip-17.04-alt2 perl-Plack-Middleware-Session-0.33-alt1 python3-module-autopep8-2.0.2-alt1 python3-module-avro-1.11.1-alt2 python3-module-contextlib2-21.6.0-alt1 python3-module-easyprocess-1.1-alt1 python3-module-graphql-core-3.2.3-alt1 python3-module-zmq-24.0.1-alt1.1.1 rogue-5.4.4-alt3 splitvt-1.6.6_6-alt1.qa1 sqlcipher-4.5.4-alt1 statserial-1:1.1-alt3 traefik-2.10.3-alt1 varmon-1.2.1-alt1.qa1 Total 208 error logs.
reply other threads:[~2023-09-02 8:31 UTC|newest] Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=ZPLy5alxrWtpwu7D@beehive.mskdc.altlinux.org \ --to=hiver@altlinux.org \ --cc=devel@lists.altlinux.org \ --cc=sisyphus-cybertalk@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Sisyphus cybertalk This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \ sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com public-inbox-index sisyphus-cybertalk Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk AGPL code for this site: git clone https://public-inbox.org/public-inbox.git