* [cyber] I: Sisyphus-20220827 i586 beehive_status: +20 -13 (116)
@ 2022-08-27 7:34 ALT beekeeper
0 siblings, 0 replies; only message in thread
From: ALT beekeeper @ 2022-08-27 7:34 UTC (permalink / raw)
To: sisyphus-cybertalk
20 NEW error logs
automake_1.11-1.11.6-alt9
checking for upc... no
configure: error: no Unified Parallel C compiler was found
+ exit_status=77
--
+ exit 77
2 of 878 tests failed
(73 tests were not run)
clisp-1:2.49.92-alt2
Bye.
(echo *.erg | grep '*' >/dev/null) || (echo "Test failed:" ; ls -l *erg; echo "To see
which tests failed, type" ; echo " cat "`pwd`"/*.erg" ; exit 1)
Test failed:
-rw-r--r-- 1 builder builder 848 Aug 27 06:25 socket.erg
To see which tests failed, type
cat /usr/src/RPM/BUILD/clisp-2.49.92/src/tests/*.erg
ffmpeg-2:4.4.2-alt1
+ ./configure --prefix=/usr --libdir=/usr/lib --shlibdir=/usr/lib --mandir=/usr/share/man
--docdir=/usr/share/doc/ffmpeg-4.4.2 --disable-rpath --enable-gpl --enable-version3
--enable-pthreads --enable-shared --disable-static --enable-mmx --disable-nonfree
--enable-ffplay --enable-ffprobe --enable-avfilter --enable-avresample
--disable-avisynth --enable-bzlib --enable-chromaprint --enable-frei0r --enable-gnutls
--disable-ladspa --enable-libaom --disable-libaribb24 --enable-libass --enable-libbluray
--enable-libbs2b --enable-libcaca --enable-libcdio --disable-libcelt --enable-libcodec2
--enable-libdav1d --disable-libdavs2 --enable-libdc1394 --enable-libdrm --disable-libflite
--enable-libfontconfig --enable-libfreetype --enable-libfribidi --disable-libglslang
--enable-libgme --enable-libgsm --disable-libilbc --enable-libjack --disable-libklvanc
--disable-libkvazaar --disable-liblensfun --disable-libmfx --disable-libmodplug
--enable-libmp3lame --enable-librabbitmq --disable-libmysofa --enable-libopencore-amrnb
--enable-libopencore-amrwb --enable-libopenjpeg --disable-libopenmpt --enable-libopus
--enable-libpulse --enable-librsvg --disable-librtmp --enable-librubberband
--disable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
--disable-libtesseract --enable-libtheora --enable-libtwolame --enable-libudev
--enable-libv4l2 --enable-libvidstab --disable-libvmaf --enable-libvorbis --enable-libvpx
--enable-libwebp --enable-libx264 --enable-libx265 --disable-libxavs2 --enable-libxml2
--enable-libxvid --disable-libzimg --enable-libzmq --enable-libzvbi --enable-lv2
--disable-omx --enable-openal --disable-opencl --enable-opengl --disable-pocketsphinx
--enable-sdl2 --enable-vaapi --disable-vapoursynth --enable-vdpau --enable-vulkan
--enable-zlib --enable-cuvid --enable-hardcoded-tables --enable-runtime-cpudetect
--enable-debug --disable-stripping --enable-pic '--extra-cflags=-pipe -frecord-gcc-switches
-Wall -g -march=i586 -mtune=generic -DRUNTIME_CPUDETECT' --extra-version=alt1
ERROR: sdl2 requested but not found
If you think configure made a mistake, make sure you are using the latest
ffmpeg-plugin-browser-102-alt1
+ ./configure --prefix=/usr --libdir=/usr/lib --shlibdir=/usr/lib --mandir=/usr/share/man
--docdir=/usr/share/doc/ffmpeg-plugin-browser-102 --disable-rpath --enable-gpl
--enable-version3 --enable-pthreads --disable-shared --enable-static
--enable-mmx --disable-nonfree --disable-ffplay --disable-ffprobe --enable-avfilter
--disable-avisynth --enable-bzlib --enable-chromaprint --enable-frei0r --enable-gnutls
--disable-ladspa --enable-libaom --disable-libaribb24 --enable-libass --enable-libbluray
--enable-libbs2b --enable-libcaca --enable-libcdio --disable-libcelt --enable-libcodec2
--enable-libdav1d --disable-libdavs2 --enable-libdc1394 --enable-libdrm --disable-libflite
--enable-libfontconfig --enable-libfreetype --enable-libfribidi --disable-libglslang
--enable-libgme --enable-libgsm --disable-libilbc --enable-libjack --disable-libklvanc
--disable-libkvazaar --disable-liblensfun --disable-libmfx --disable-libmodplug
--enable-libmp3lame --enable-librabbitmq --disable-libmysofa --enable-libopencore-amrnb
--enable-libopencore-amrwb --enable-libopenjpeg --disable-libopenmpt --enable-libopus
--enable-libpulse --enable-librsvg --disable-librtmp --enable-librubberband
--disable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
--disable-libtesseract --enable-libtheora --enable-libtwolame --enable-libv4l2
--enable-libvidstab --disable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp
--enable-libx264 --enable-libx265 --disable-libxavs2 --enable-libxml2 --enable-libxvid
--disable-libzimg --enable-libzmq --enable-libzvbi --enable-lv2 --disable-omx
--enable-openal --disable-opencl --enable-opengl --disable-pocketsphinx --enable-sdl2
--enable-vaapi --disable-vapoursynth --enable-vdpau --enable-vulkan --enable-zlib
--enable-cuvid --enable-hardcoded-tables --enable-runtime-cpudetect --enable-debug
--disable-stripping --enable-pic '--extra-cflags=-pipe -frecord-gcc-switches -Wall -g
-march=i586 -mtune=generic -DRUNTIME_CPUDETECT' --extra-version=alt1
ERROR: sdl2 requested but not found
If you think configure made a mistake, make sure you are using the latest
guile22-2.2.7-alt1
FAIL: numbers.test: Number-theoretic division: floor/: mixed types: (130.0 10/7)
FAIL: numbers.test: Number-theoretic division: floor/: mixed types: (-130.0 -10/7)
FAIL: numbers.test: Number-theoretic division: ceiling/: mixed types: (130.0 -10/7)
FAIL: numbers.test: Number-theoretic division: ceiling/: mixed types: (-130.0 10/7)
FAIL: numbers.test: Number-theoretic division: truncate/: mixed types: (130.0 10/7)
FAIL: numbers.test: Number-theoretic division: truncate/: mixed types: (130.0 -10/7)
FAIL: numbers.test: Number-theoretic division: truncate/: mixed types: (-130.0 10/7)
FAIL: numbers.test: Number-theoretic division: truncate/: mixed types: (-130.0 -10/7)
Running optargs.test
--
errors: 0
FAIL: check-guile
1 of 1 test failed
kernel-image-std-def-2:5.15.62-alt1
BTFIDS vmlinux
FAILED: load BTF from vmlinux: Invalid argument
make: *** [Makefile:1213: vmlinux] Error 255
kernel-image-un-def-1:5.18.19-alt1
BTFIDS vmlinux
FAILED: load BTF from vmlinux: Invalid argument
make: *** [Makefile:1168: vmlinux] Error 255
kicad-1:6.0.6-alt1
-- Found cairo, version 1.16.0
Package libffi was not found in the pkg-config search path.
Perhaps you should add the directory containing `libffi.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libffi', required by 'gobject-2.0', not found
Package libffi was not found in the pkg-config search path.
Perhaps you should add the directory containing `libffi.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libffi', required by 'gobject-2.0', not found
Package libffi was not found in the pkg-config search path.
Perhaps you should add the directory containing `libffi.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libffi', required by 'gobject-2.0', not found
Package libffi was not found in the pkg-config search path.
Perhaps you should add the directory containing `libffi.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libffi', required by 'gobject-2.0', not found
-- Found Cairo: /usr/lib/libcairo.so (found suitable version "1.16.0", minimum required
is "1.12")
libffado-2.4.1-alt4
building 'version.h' from 'version.h.in'
g++ -o src/libavc/avc_definitions.os -c -pipe -frecord-gcc-switches -Wall -g -O2
-flto=auto -march=i586 -mtune=generic -ffast-math --std=gnu++11 -std=gnu++11 -mx32
-Wall -g -fPIC -fPIC -DDEBUG -DDEBUG_MESSAGES -DENABLE_BEBOB -DENABLE_FIREWORKS
-DENABLE_OXFORD -DENABLE_MOTU -DENABLE_DICE -DENABLE_RME -DENABLE_GENERICAVC -I. -Isrc
-I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -I/usr/include/libxml2
-I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include
src/libavc/avc_definitions.cpp
cc1plus: sorry, unimplemented: 64-bit mode not compiled in
gcc -o src/libieee1394/csr1212.os -c -pipe -frecord-gcc-switches -Wall -g -O2
-flto=auto -march=i586 -mtune=generic -ffast-math -Wall -g -fPIC -fPIC -DDEBUG
-DDEBUG_MESSAGES -DENABLE_BEBOB -DENABLE_FIREWORKS -DENABLE_OXFORD -DENABLE_MOTU
-DENABLE_DICE -DENABLE_RME -DENABLE_GENERICAVC -I. -Isrc -I/usr/include/libxml++-2.6
-I/usr/lib/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4
-I/usr/lib/glibmm-2.4/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
-I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include src/libieee1394/csr1212.c
gcc -o src/libstreaming/util/cip.os -c -pipe -frecord-gcc-switches -Wall -g -O2
-flto=auto -march=i586 -mtune=generic -ffast-math -Wall -g -fPIC -fPIC -DDEBUG
-DDEBUG_MESSAGES -DENABLE_BEBOB -DENABLE_FIREWORKS -DENABLE_OXFORD -DENABLE_MOTU
-DENABLE_DICE -DENABLE_RME -DENABLE_GENERICAVC -I. -Isrc -I/usr/include/libxml++-2.6
-I/usr/lib/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4
-I/usr/lib/glibmm-2.4/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
-I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include src/libstreaming/util/cip.c
g++ -o src/libutil/DelayLockedLoop.os -c -pipe -frecord-gcc-switches -Wall -g -O2
-flto=auto -march=i586 -mtune=generic -ffast-math --std=gnu++11 -std=gnu++11 -mx32
-Wall -g -fPIC -fPIC -DDEBUG -DDEBUG_MESSAGES -DENABLE_BEBOB -DENABLE_FIREWORKS
-DENABLE_OXFORD -DENABLE_MOTU -DENABLE_DICE -DENABLE_RME -DENABLE_GENERICAVC -I. -Isrc
-I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -I/usr/include/libxml2
-I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include
src/libutil/DelayLockedLoop.cpp
scons: *** [src/libavc/avc_definitions.os] Error 1
cc1plus: sorry, unimplemented: 64-bit mode not compiled in
scons: *** [src/libutil/DelayLockedLoop.os] Error 1
scons: building terminated because of errors.
libpki-0.8.9-alt6.git20180603
verify-elf: WARNING: ./usr/lib64/libpki.so.89.89.1: uses non-LFS functions: fcntl fopen
lseek open readdir
verify-elf: ERROR: ./usr/bin/pki-lirt: RPATH contains standard library path "/usr/lib64":
/usr/lib64
verify-elf: ERROR: ./usr/bin/pki-siginfo: RPATH contains standard library path
"/usr/lib64": /usr/lib64
verify-elf: ERROR: ./usr/bin/pki-derenc: RPATH contains standard library path "/usr/lib64":
/usr/lib64
verify-elf: WARNING: ./usr/bin/pki-derenc: uses non-LFS functions: fopen
verify-elf: ERROR: ./usr/bin/pki-crl: RPATH contains standard library path "/usr/lib64":
/usr/lib64
verify-elf: ERROR: ./usr/bin/pki-cert: RPATH contains standard library path "/usr/lib64":
/usr/lib64
verify-elf: ERROR: ./usr/bin/pki-request: RPATH contains standard library path
"/usr/lib64": /usr/lib64
verify-elf: ERROR: ./usr/bin/pki-query: RPATH contains standard library path "/usr/lib64":
/usr/lib64
verify-elf: ERROR: ./usr/bin/pki-xpair: RPATH contains standard library path "/usr/lib64":
/usr/lib64
verify-elf: ERROR: ./usr/bin/url-tool: RPATH contains standard library path "/usr/lib64":
/usr/lib64
verify-elf: ERROR: ./usr/bin/pki-tool: RPATH contains standard library path "/usr/lib64":
/usr/lib64
ogre-13.2.4-alt2
-- Building pugixml
Error: /usr/src/RPM/BUILD/ogre-13.2.4/i586-alt-linux/pugixml-1.10 is not a directory
-- Building freetype
Error: /usr/src/RPM/BUILD/ogre-13.2.4/i586-alt-linux/freetype-2.10.1/objs is not
a directory
-- Looking for FreeImage...
--
-- Checking for module 'freeimage'
-- No package 'freeimage' found
-- Found FreeImage: /usr/lib/libfreeimage.so
-- Found Freetype: /usr/lib/libfreetype.so (found version "2.12.1")
Package bzip2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `bzip2.pc'
to the PKG_CONFIG_PATH environment variable
Package 'bzip2', required by 'freetype2', not found
Package bzip2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `bzip2.pc'
to the PKG_CONFIG_PATH environment variable
Package 'bzip2', required by 'freetype2', not found
Package bzip2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `bzip2.pc'
to the PKG_CONFIG_PATH environment variable
Package 'bzip2', required by 'freetype2', not found
Package bzip2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `bzip2.pc'
openmsx-18-alt1
make: Leaving directory '/usr/src/RPM/BUILD/openmsx-18'
make: Entering directory '/usr/src/RPM/BUILD/openmsx-18'
mv derived/x86_64-linux-rpm/config/probed_defs.mk
derived/x86_64-linux-rpm/config/probed_defs.mk.failed
make: *** [build/main.mk:451: config] Error 1
make: Leaving directory '/usr/src/RPM/BUILD/openmsx-18'
make: *** Waiting for unfinished jobs....
make: Entering directory '/usr/src/RPM/BUILD/openmsx-18'
python3 build/version2code.py derived/x86_64-linux-rpm/config/Version.ii
Creating derived/x86_64-linux-rpm/config/Version.ii...
make: Leaving directory '/usr/src/RPM/BUILD/openmsx-18'
openni-1.5.7.10-alt2_23
+ pushd Platform/Linux/Redist/OpenNI-Bin-Dev-Linux-x86-v1.5.7.10
/usr/src/tmp/rpm-tmp.66035: line 126: pushd:
Platform/Linux/Redist/OpenNI-Bin-Dev-Linux-x86-v1.5.7.10: No such file or directory
openni-primesense-5.1.6.6-alt2_20
+ pushd Platform/Linux/Redist/Sensor-Bin-Linux-x86-v5.1.6.6
/usr/src/tmp/rpm-tmp.27397: line 126: pushd:
Platform/Linux/Redist/Sensor-Bin-Linux-x86-v5.1.6.6: No such file or directory
python3-3.10.6-alt1
1 test failed:
test_socket
21 tests skipped:
test_curses test_devpoll test_gdb test_ioctl test_kqueue
test_msilib test_nis test_ossaudiodev test_smtpnet
test_socketserver test_startfile test_tix test_tk test_ttk_guionly
test_urllib2net test_urllibnet test_winconsoleio test_winreg
test_winsound test_xmlrpc_net test_zipfile64
Total duration: 2 min 17 sec
Tests result: FAILURE
python3-module-joblib-1.1.0-alt1
> assert b"resource_tracker" not in err, err.decode()
E AssertionError:
/usr/src/RPM/BUILD/python3-module-joblib-1.1.0/joblib/externals/loky/backend/resource_tracker.py:303:
UserWarning: resource_tracker:
/usr/src/tmp/joblib_memmapping_folder_3634483_9fe7213044c748f7be22107c9fe99d51_87bc9b1b0b50415790ffc1820301075a/3634483-3932979176-ae3e7d5de13f4429829d7e8bf33bff9d.pkl:
FileNotFoundError(2, 'No such file or directory')
E warnings.warn(
--
E del registry[rtype][name]
E KeyError:
'/usr/src/tmp/joblib_memmapping_folder_3634483_9fe7213044c748f7be22107c9fe99d51_87bc9b1b0b50415790ffc1820301075a/3634483-3932979176-ae3e7d5de13f4429829d7e8bf33bff9d.pkl'
E Traceback (most recent call last):
--
E raise ShutdownExecutorError(
E joblib.externals.loky.process_executor.ShutdownExecutorError: cannot
schedule new futures after shutdown
E
E assert b'resource_tracker' not in
b'/usr/src/RPM/BUILD/python3-module-joblib-1.1.0/joblib/externals/loky/backend/resource_tracker.py:303:
UserWarning: resource_tracker:
/usr/src/tmp/joblib_memmapping_folder_3634483_9fe7213044c748f7be22107c9fe99d51_87bc9b1b0b50415790ffc1820301075a/3634483-3932979176-ae3e7d5de13f4429829d7e8bf33bff9d.pkl:
FileNotFoundError(2, \'No such file or directory\')\n
warnings.warn(\nTraceback (most recent call last):\n File
"/usr/src/RPM/BUILD/python3-module-joblib-1.1.0/joblib/externals/loky/backend/resource_tracker.py",
line 281, in main\n del registry[rtype][name]\nKeyError:
\'/usr/src/tmp/joblib_memmapping_folder_3634483_9fe7213044c748f7be22107c9fe99d51_87bc9b1b0b50415790ffc1820301075a/3634483-3932979176-ae3e7d5de13f4429829d7e8bf33bff9d.pkl\'\nTraceback
(most recent call last):\n File "<string>", line 48, in <module>\n File
"/usr/lib/python3.10/concurrent/futures/_base.py", line 451, in result\n return
self.__get_result()\n File "/usr/lib/python3.10/concurrent/futures/_base.py",
line 403, in __get_result\n raise self._exception\n File
"/usr/lib/python3.10/concurrent/futures/thread.py", line 58, in run\n result =
self.fn(*self.args, **self.kwargs)\n File "<string>", line 23, in parallel_get_filename\n
File "/usr/src/RPM/BUILD/python3-module-joblib-1.1.0/joblib/parallel.py",
line 1043, in __call__\n if self.dispatch_one_batch(iterator):\n File
"/usr/src/RPM/BUILD/python3-module-joblib-1.1.0/joblib/parallel.py",
line 861, in dispatch_one_batch\n self._dispatch(tasks)\n File
"/usr/src/RPM/BUILD/python3-module-joblib-1.1.0/joblib/parallel.py", line 779,
in _dispatch\n job = self._backend.apply_async(batch, callback=cb)\n File
"/usr/src/RPM/BUILD/python3-module-joblib-1.1.0/joblib/_parallel_backends.py", line
531, in apply_async\n future = self._workers.submit(SafeFunction(func))\n File
"/usr/src/RPM/BUILD/python3-module-joblib-1.1.0/joblib/externals/loky/reusable_executor.py",
line 177, in submit\n return super(_ReusablePoolExecutor, self).submit(\n File
"/usr/src/RPM/BUILD/python3-module-joblib-1.1.0/joblib/externals/loky/process_executor.py",
line 1117, in submit\n raise
ShutdownExecutorError(\njoblib.externals.loky.process_executor.ShutdownExecutorError:
cannot schedule new futures after shutdown\n'
joblib/test/test_memmapping.py:582: AssertionError
--
XPASS joblib/test/test_parallel.py::test_threadpool_limitation_in_child_context[-1-None]
Fails on ppc64le
FAILED
joblib/test/test_memmapping.py::test_multithreaded_parallel_termination_resource_tracker_silent
= 1 failed, 1178 passed, 25 skipped, 2 xfailed, 16 xpassed in 127.86s (0:02:07) =
--
[DEBUG:MainProcess:MainThread] running the remaining "atexit" finalizers
ERROR: InvocationError for command
/usr/src/RPM/BUILD/python3-module-joblib-1.1.0/.tox/py3/bin/pytest -vra (exited with
code 1)
py3 finish: run-test after 128.57 seconds
--
___________________________________ summary ____________________________________
ERROR: py3: commands failed
cleanup /usr/src/RPM/BUILD/python3-module-joblib-1.1.0/.tox/.tmp/package/1/joblib-1.1.0.zip
springlobby-0.271-alt1_6
-- Could NOT find LATEX (missing: LATEX_COMPILER)
-- Found xgettext: /usr/bin/xgettext
-- Found msgmerge: /usr/bin/msgmerge
-- Found Boost: /usr/lib/cmake/Boost-1.77.0/BoostConfig.cmake (found suitable version
"1.77.0", minimum required is "1.42.0") found components: thread system
-- found wx-config: /usr/bin/wx-config-3.0
CMake Error at src/CMakeLists.txt:73 (message):
couldn't find wx-widgets >= 3.0, found wxWidgets3-devel isn't installed for
architecture 'x86_64'
-- Configuring incomplete, errors occurred!
See also "/usr/src/RPM/BUILD/springlobby-0.271/i586-alt-linux/CMakeFiles/CMakeOutput.log".
verilator-4.224-alt1
221 | struct yy_buffer_state
V3PreLex_pregen.yy.cpp:489: note: a different type is defined in another translation unit
489 | struct yy_buffer_state
V3Lexer_pregen.yy.cpp:227: note: the first difference of corresponding definitions is
field 'yy_input_file'
227 | std::streambuf* yy_input_file;
V3PreLex_pregen.yy.cpp:492: note: a field of same name but different type is defined
in another translation unit
492 | FILE *yy_input_file;
V3Lexer_pregen.yy.cpp:221: note: type name 'std::basic_streambuf<char,
std::char_traits<char> >' should match type name '_IO_FILE'
221 | struct yy_buffer_state
make[2]: Leaving directory '/usr/src/RPM/BUILD/verilator-4.224/src/obj_dbg'
vhttpd-0.7.11-alt1
Running unix-from-socket-http... ok
Running unix-guile... FAILED: ;;; note: auto-compilation is enabled, set
GUILE_AUTO_COMPILE=0
;;; or pass the --no-auto-compile argument to disable.
virtualbox-6.1.36-alt1
Checking for pthread: found, OK.
./configure: line 237:
/usr/src/RPM/BUILD/VirtualBox-6.1.36_OSE/kBuild/bin/linux.amd64/kmk_sed: No such file
or directory
Checking for libxml2: ./configure: line 252:
/usr/src/RPM/BUILD/VirtualBox-6.1.36_OSE/kBuild/bin/linux.amd64/kmk_sed: No such file
or directory
xml2 not found at -lxml2 -lpthread or xml2 headers not found
13 error logs REMOVED from the list
LibreOffice-still-7.2.7.2-alt1
altlinux-freedesktop-menu-0.68-alt1
appstream-0.15.4-alt1
cinnamon-control-center-5.4.6-alt1
firefox-103.0.1-alt1
grub-2.06-alt7
jabbix-1.0.1-alt3.2
jss-5.1.0-alt1
libvamp-2.10.0-alt1
lightdm-1.30.0-alt22
node-canvas-2.8.0-alt1
node-sass-7.0.0-alt2
xpra-4.0.6-alt1.1
Total 116 error logs.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2022-08-27 7:34 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-08-27 7:34 [cyber] I: Sisyphus-20220827 i586 beehive_status: +20 -13 (116) ALT beekeeper
ALT Linux Sisyphus cybertalk
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \
sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com
public-inbox-index sisyphus-cybertalk
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git