From: ALT beekeeper <hiver@altlinux.org> To: sisyphus-cybertalk@lists.altlinux.org Subject: [cyber] I: p9-20200126 x86_64 beehive_status: +9 -11 (107) Date: Sun, 26 Jan 2020 06:44:48 +0000 Message-ID: <20200126064448.GA21697@gyle.altlinux.org> (raw) [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #1: Type: text/plain; charset=unknown-8bit, Size: 5628 bytes --] 9 NEW error logs Perlbal-1.80-alt1 Result: FAIL Failed 1/25 test programs. 0/526 subtests failed. make: *** [Makefile:852: test_dynamic] Error 255 apache-commons-ognl-3.0.2-alt2_15.20120313svn1102435jpp8 [ERROR] [ERROR] Please refer to /usr/src/RPM/BUILD/apache-commons-ognl-3.0.2/target/surefire-reports for the individual test results. [ERROR] Please refer to dump files (if any exist) [date]-jvmRun[N].dump, [date].dumpstream and [date]-jvmRun[N].dumpstream. [ERROR] -> [Help 1] [ERROR] [ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch. [ERROR] Re-run Maven using the -X switch to enable full debug logging. [ERROR] [ERROR] For more information about the errors and possible solutions, please read the following articles: [ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException cilk-5.4.6-alt11 perl -I. ./bfnnconv.pl ./cilk-faq.bfnn no ./cilk-faq.xrefdb (No such file or directory) at ./bfnnconv.pl line 43. S0 \rS1 \rQ1.1 \rQ1.2 \rQ1.3 \rQ1.4 \rQ1.5 \rQ1.6 \rQ1.7 \rQ1.8 \rS2 \rQ2.1 \rQ2.2 \rQ2.3 \rQ2.4 \rS3 \rQ3.1 \rQ3.2 \rQ3.3 \rQ3.4 \runknown question `compile' at ./bfnnconv.pl line 221, <> line 263. -- libtool: install: /bin/install -p .libs/libcilk.g.so.0.0.0 /usr/src/tmp/cilk-buildroot/usr/lib64/libcilk.g.so.0.0.0 /bin/install: cannot stat '.libs/libcilk.g.so.0.0.0': No such file or directory make[2]: *** [Makefile:565: install-libLTLIBRARIES] Error 1 compiz-0.9.14.0-alt1 make[1]: Entering directory '/usr/src/RPM/BUILD/compiz-0.9.14.0/x86_64-alt-linux' [ 11%] Built target compiz_string make[1]: Leaving directory '/usr/src/RPM/BUILD/compiz-0.9.14.0/x86_64-alt-linux' make[2]: Entering directory '/usr/src/RPM/BUILD/compiz-0.9.14.0/x86_64-alt-linux' [ 0%] Generating ../../po/compiz.pot make[2]: Leaving directory '/usr/src/RPM/BUILD/compiz-0.9.14.0/x86_64-alt-linux' make[1]: Entering directory '/usr/src/RPM/BUILD/compiz-0.9.14.0/x86_64-alt-linux' [ 11%] Built target nls make[1]: Leaving directory '/usr/src/RPM/BUILD/compiz-0.9.14.0/x86_64-alt-linux' make: *** [Makefile:163: all] Error 2 lockfile-progs-0.1.17-alt1 ! test -e check/file.lock bin/lockfile-create --lock-name check/file.lock bin/lockfile-touch --oneshot --lock-name check/file.lock bin/lockfile-check --lock-name check/file.lock bin/lockfile-remove --lock-name check/file.lock ! test -e check/file.lock bin/lockfile-create --use-pid --lock-name check/file.lock *** buffer overflow detected ***: bin/lockfile-create terminated make: *** [Makefile:43: check] Aborted make: Leaving directory '/usr/src/RPM/BUILD/lockfile-progs-0.1.17' meschach-1.2-alt1.b.3 Verifying ELF objects in /usr/src/tmp/meschach-buildroot (arch=normal,fhs=normal,lfs=relaxed,lint=relaxed,rpath=normal,stack=normal,textrel=normal,unresolved=normal) verify-elf: ERROR: ./usr/lib64/libmeschach.so.0: undefined symbol: bd_free verify-elf: ERROR: ./usr/lib64/libmeschach.so.0: undefined symbol: Usolve verify-elf: ERROR: ./usr/lib64/libmeschach.so.0: undefined symbol: trieig verify-elf: ERROR: ./usr/lib64/libmeschach.so.0: undefined symbol: square verify-elf: ERROR: ./usr/lib64/libmeschach.so.0: undefined symbol: rot_vec verify-elf: ERROR: ./usr/lib64/libmeschach.so.0: undefined symbol: givens verify-elf: ERROR: ./usr/lib64/libmeschach.so.0: undefined symbol: _v_norm2 neko-2.2.0-alt4.gitb68336c make[1]: Entering directory '/usr/src/RPM/BUILD/neko-2.2.0' [ 97%] Built target nekotools make[1]: Leaving directory '/usr/src/RPM/BUILD/neko-2.2.0' make[2]: Entering directory '/usr/src/RPM/BUILD/neko-2.2.0' [ 80%] Generating bin/nekoml.std make[2]: Leaving directory '/usr/src/RPM/BUILD/neko-2.2.0' make[1]: Entering directory '/usr/src/RPM/BUILD/neko-2.2.0' [ 98%] Built target nekoml.std make[1]: Leaving directory '/usr/src/RPM/BUILD/neko-2.2.0' make: *** [Makefile:163: all] Error 2 perl-CHI-0.60-alt1 # 40 is not between 59 and 99 # Failed test 'Memory:l1_cache size = 40' # at /usr/src/RPM/BUILD/CHI-0.60/blib/lib/CHI/t/Driver.pm line 1555. -- # 2 is not between 3 and 5 # Failed test 'Memory:l1_cache keys = 2' # at /usr/src/RPM/BUILD/CHI-0.60/blib/lib/CHI/t/Driver.pm line 1557. -- t/Driver-Memory.t (Wstat: 512 Tests: 875 Failed: 2) Failed tests: 864-865 Non-zero exit status: 2 -- Result: FAIL Failed 1/26 test programs. 2/1787 subtests failed. make: *** [Makefile:828: test_dynamic] Error 255 python-module-eventlet-0.24.1-alt1 tests.zmq_test.test_recv_timeout ... ok FAIL: test_name (tests.patcher_test.GreenThreadWrapper) Traceback (most recent call last): -- self.assertEqual(len(lines), 10, "\n".join(lines)) AssertionError: FAIL - timed out Ran 681 tests in 121.072s FAILED (SKIP=99, failures=1) ERROR: InvocationError for command /usr/src/RPM/BUILD/python-module-eventlet-0.24.1/.tox/py27/bin/nosetests --verbose --with-coverage --cover-erase --cover-package=eventlet tests/ (exited with code 1) ERROR: invocation failed (exit code 1) ✖ FAIL py27 in 2 minutes, 12.974 seconds ___________________________________ summary ____________________________________ ERROR: py27: parallel child exit code 1 py37-selects: commands succeeded 11 error logs REMOVED from the list kernel-image-std-debug-1:4.19.49-alt1 libgdk-pixbuf-2.38.2-alt1 perl-HTTP-Proxy-0.304-alt2 perl-Parallel-Prefork-0.18-alt1_7 python-module-etcd-0.4.5-alt3.S1 python-module-lxml-4.3.3-alt1.1 python-module-scikits.fitting-1:0.6-alt2 python-module-sh-1.12.14-alt4 quilt-0.66-alt1 rng-tools-6.7-alt2 sgc-0.2.1-alt3 Total 107 error logs.
reply other threads:[~2020-01-26 6:44 UTC|newest] Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200126064448.GA21697@gyle.altlinux.org \ --to=hiver@altlinux.org \ --cc=devel@lists.altlinux.org \ --cc=sisyphus-cybertalk@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Sisyphus cybertalk This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \ sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com public-inbox-index sisyphus-cybertalk Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk AGPL code for this site: git clone https://public-inbox.org/public-inbox.git