[cyber] I: p9-20191208 x86_64 beehive_status: +7 -11 (105)

[cyber] I: p9-20191208 x86_64 beehive_status: +7 -11 (105)

[ALT beekeeper]

	7 NEW error logs

SNNS-4.3-alt1.1.1.1
	ranlib	libfunc.a
	END OF COMMANDS THAT MAY FAIL
	make[1]: Leaving directory '/usr/src/RPM/BUILD/SNNSv4.3/kernel/sources'
	make[1]: Entering directory '/usr/src/RPM/BUILD/SNNSv4.3/xgui/sources'
	x86_64-alt-linux-gcc  libxgui1.a libxgui2.a lib3d.a \
	-lXaw3d -lXmu -lXt -lXext -lSM -lICE  -lX11  \
	../../kernel/sources/libkernel.a ../../kernel/sources/libfunc.a -lm -lfl  -o xgui
	/usr/bin/ld.default: libxgui1.a(ui_controlP.o): in function `ui_rem_performPrunInit':
	/usr/src/RPM/BUILD/SNNSv4.3/xgui/sources/ui_controlP.c:1191: warning: the use of
	`tempnam' is dangerous, better use `mkstemp'
	make[1]: Leaving directory '/usr/src/RPM/BUILD/SNNSv4.3/xgui/sources'

apache-commons-ognl-3.0.2-alt2_15.20120313svn1102435jpp8
	[ERROR]
	[ERROR] Please refer to
	/usr/src/RPM/BUILD/apache-commons-ognl-3.0.2/target/surefire-reports for the individual
	test results.
	[ERROR] Please refer to dump files (if any exist) [date]-jvmRun[N].dump, [date].dumpstream
	and [date]-jvmRun[N].dumpstream.
	[ERROR] -> [Help 1]
	[ERROR]
	[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
	[ERROR] Re-run Maven using the -X switch to enable full debug logging.
	[ERROR]
	[ERROR] For more information about the errors and possible solutions, please read the
	following articles:
	[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException

cilk-5.4.6-alt11
	perl -I. ./bfnnconv.pl ./cilk-faq.bfnn
	no ./cilk-faq.xrefdb (No such file or directory) at ./bfnnconv.pl line 43.
	S0	    \rS1		 \rQ1.1		\rQ1.2	       \rQ1.3	      \rQ1.4	     \rQ1.5
	\rQ1.6	       \rQ1.7	      \rQ1.8	     \rS2	  \rQ2.1		 \rQ2.2
	\rQ2.3	       \rQ2.4	      \rS3	   \rQ3.1	  \rQ3.2		 \rQ3.3
	\rQ3.4	       \runknown question `compile' at ./bfnnconv.pl line 221, <> line 263.
	--
	libtool: install: /bin/install -p .libs/libcilk.p.so.0.0.0
	/usr/src/tmp/cilk-buildroot/usr/lib64/libcilk.p.so.0.0.0
	/bin/install: cannot stat '.libs/libcilk.p.so.0.0.0': No such file or directory
	make[2]: *** [Makefile:565: install-libLTLIBRARIES] Error 1

perl-HTTP-Proxy-0.304-alt2
	# socket is non blocking, switching to blocking mode
	#   Failed test 'Read some data from the socket'
	#   at t/23connect.t line 79.
	#   Failed test 'CONNECTed to the TCP server and got the banner'
	#   at t/23connect.t line 80.
	--
	t/23connect.t		(Wstat: 0 Tests: 4 Failed: 2)
	Failed tests:  2-3
	Files=37, Tests=465, 12 wallclock secs ( 0.12 usr  0.02 sys +  4.83 cusr  0.56 csys =
	5.53 CPU)
	Result: FAIL
	Failed 1/37 test programs. 2/465 subtests failed.
	make: *** [Makefile:792: test_dynamic] Error 255

perl-Server-Starter-0.34-alt1
	received TERM, sending TERM to all workers:90001
	hasher-priv: master: idle time limit (3600 seconds) exceeded

python-module-pexpect-4.6-alt3
	tests/test_replwrap.py::REPLWrapTestCase::test_long_running_multiline PASSED [ 66%]
	tests/test_replwrap.py::REPLWrapTestCase::test_multiline FAILED		 [ 66%]
	tests/test_replwrap.py::REPLWrapTestCase::test_no_change_prompt PASSED	 [ 67%]

python-module-scikits.fitting-1:0.6-alt2
	Utils: Test squash and unsquash. ... ok
	FAIL: NonLinearLeastSquaresFit: Compare to LinearLeastSquaresFit on a linear problem
	and check use of Jacobian.
	Traceback (most recent call last):
	--
	raise AssertionError(msg)
	AssertionError:
	Arrays are not almost equal to 6 decimals
	--
	Ran 31 tests in 1.347s
	FAILED (failures=1)

	11 error logs REMOVED from the list
cross-gcc-8.2.1-alt1_1.1
gear-2.2.0-alt1
kde5-libkgapi-19.08.2-alt2
libopenh264-2.0.0-alt1
meschach-1.2-alt1.b.3
perl-IO-Event-0.813-alt2
python-module-pebble-4.3.7-alt1.git20180228
python3-3.7.4-alt2
quilt-0.66-alt1
racket-7.3-alt1
sgc-0.2.1-alt3

Total 105 error logs.