From: ALT beekeeper <hiver@altlinux.org>
To: sisyphus-cybertalk@lists.altlinux.org
Subject: [cyber] I: Sisyphus-20190603 i586 beehive_status: +16 -10 (72)
Date: Mon, 3 Jun 2019 13:04:12 +0000
Message-ID: <20190603130412.GA8552@gyle.altlinux.org> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=unknown-8bit, Size: 11572 bytes --]
16 NEW error logs
atlas-3.9.35-alt1.qa1
BEGIN STAGE 2-2-1: BUILDIN
hasher-priv: master: idle time limit (3600 seconds) exceeded
derby-0:10.13.1.1-alt1_4jpp8
[javac] at
com.sun.tools.javac.parser.JavacParser.blockStatements(JavacParser.java:2337)
BUILD FAILED
/usr/src/RPM/BUILD/derby-10.13.1.1/db-derby-10.13.1.1-src/build.xml:525: The following
error occurred while executing this line:
exec-maven-plugin-1.6.0-alt1_6jpp8
[ERROR]
[ERROR] Please refer to /usr/src/RPM/BUILD/exec-maven-plugin-1.6.0/target/surefire-reports
for the individual test results.
[ERROR] Please refer to dump files (if any exist) [date]-jvmRun[N].dump, [date].dumpstream
and [date]-jvmRun[N].dumpstream.
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the
following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException
freshplayerplugin-0.3.10-alt1
10/10 Test #10: test_thread_specifier ............Child aborted***Exception: 0.06 sec
90% tests passed, 1 tests failed out of 10
Total Test time (real) = 0.59 sec
The following tests FAILED:
10 - test_thread_specifier (Child aborted)
gnutls30-3.6.8-alt1
# SKIP: 16
# XFAIL: 0
# FAIL: 0
# XPASS: 0
# ERROR: 0
make[3]: Leaving directory '/usr/src/RPM/BUILD/gnutls-3.6.8/fuzz'
--
# SKIP: 0
# XFAIL: 0
# FAIL: 0
# XPASS: 0
# ERROR: 0
make[4]: Leaving directory '/usr/src/RPM/BUILD/gnutls-3.6.8/guile'
gromacs-4.0.7-alt8
In file included from /usr/include/stdio.h:862,
from ../../../include/sysstuff.h:51,
from ../../../src/tools/make_ndx.c:41:
/usr/include/bits/stdio2.h:33:10: note: '__builtin___sprintf_chk' output between 2 and
8192 bytes into a destination of size 4096
return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
__bos (__s), __fmt, __va_arg_pack ());
make[3]: Leaving directory '/usr/src/RPM/BUILD/gromacs-4.0.7/single/src/tools'
make[2]: *** [Makefile:387: all-recursive] Error 1
make[1]: *** [Makefile:326: all] Error 2
make: *** [Makefile:415: all-recursive] Error 1
jed-2:0.99.19-alt2.qa2.1
/usr/bin/ld.default: lock.o: file not recognized: file truncated
collect2: error: ld returned 1 exit status
make[1]: *** [Makefile:157: /usr/src/RPM/BUILD/jed-0.99-19/src/objs/jed] Error 1
libdict-0.3.0-alt1.git20140826
Assembler messages:
Fatal error: can't create bin/tree_common.o: No such file or directory
src/tree_common.c: In function 'tree_search_node':
perl-HTML-Widget-1.11-alt3
Compilation failed in require at t/element_span.t line 6.
BEGIN failed--compilation aborted at t/element_span.t line 6.
# Looks like your test exited with 2 before it could output anything.
--
Compilation failed in require at t/element_textarea.t line 6.
BEGIN failed--compilation aborted at t/element_textarea.t line 6.
# Looks like your test exited with 2 before it could output anything.
--
Compilation failed in require at t/element_textfield.t line 6.
BEGIN failed--compilation aborted at t/element_textfield.t line 6.
# Looks like your test exited with 2 before it could output anything.
--
Compilation failed in require at t/filter_trimedges.t line 6.
BEGIN failed--compilation aborted at t/filter_trimedges.t line 6.
# Looks like your test exited with 2 before it could output anything.
--
Compilation failed in require at t/get_constraint.t line 6.
BEGIN failed--compilation aborted at t/get_constraint.t line 6.
# Looks like your test exited with 2 before it could output anything.
--
Compilation failed in require at t/get_element.t line 6.
BEGIN failed--compilation aborted at t/get_element.t line 6.
# Looks like your test exited with 2 before it could output anything.
--
Compilation failed in require at t/get_filter.t line 6.
BEGIN failed--compilation aborted at t/get_filter.t line 6.
# Looks like your test exited with 2 before it could output anything.
--
Compilation failed in require at t/retain_default.t line 6.
BEGIN failed--compilation aborted at t/retain_default.t line 6.
# Looks like your test exited with 2 before it could output anything.
--
t/01use.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
--
Result: FAIL
Failed 34/90 test programs. 1/386 subtests failed.
make: *** [Makefile:833: test_dynamic] Error 255
python-module-coverage-4.5.3-alt1
[102084] /usr/src/RPM/BUILD/python-module-coverage-4.5.3$
/usr/src/RPM/BUILD/python-module-coverage-4.5.3/.tox/py37/bin/python -m pip freeze
>.tox/py37/log/py37-3.log
py37 installed: ERROR: Error [Errno
2] No such file or directory: 'git': 'git' while executing command git
rev-parse,alabaster==0.7.6,apipkg==1.5,appdirs==1.4.3,argcomplete==1.9.4,asn1crypto==0.24.0,atomicwrites==1.3.0,attrs==19.1.0,Automat==0.6.0,Babel==2.6.0,certifi==2016.9.26,cffi==1.12.3,chardet==3.0.4,click==6.7,constantly==15.1.0,#
Editable install with no version control (coverage==4.5.3),-e
/usr/src/RPM/BUILD/python-module-coverage-4.5.3,cryptography==2.6.1,cssselect==0.9.1,decorator==4.3.0,dnspython==1.15.0,docutils==0.14,eventlet==0.24.1,execnet==1.6.0,facebook-scribe==2.0,filelock==3.0.10,flaky==3.5.3,future==0.16.0,Genshi==0.7,gevent==1.4.0,greenlet==0.4.15,h2==3.0.1,hpack==3.0.0,html5lib==0.999999999,hyperframe==5.1.0,hyperlink==17.3.0,idna==2.8,imagesize==1.1.0,incremental==17.5.0,iniconfig==1.0.0,Jinja2==2.10,linecache2==1.0.0,lxml==4.3.3,MarkupSafe==0.23,mock==2.0.0,monotonic==1.5,more-itertools==7.0.0,ndg-httpsclient==0.4.2,nose==1.3.7,numpy==1.15.4,pbr==5.2.0,pluggy==0.11.0,priority==1.3.0,psycopg2==2.8.2,py==1.8.0,pyasn1==0.4.5,pycares==2.3.0,PyContracts==1.8.12,pycparser==2.19,pycrypto==2.7a1,Pygments==2.2.0,PyHamcrest==2.0.0a1,pymongo==3.8.0,pyOpenSSL==18.0.0,pyparsing==2.2.0,pyserial==3.4,pytest==3.10.1,pytest-forked==1.0.2,pytest-xdist==1.27.0,python-ntlm==1.1.0,pytz==2016.10,requests==2.21.0,servicemanager==0.0.16,six==1.12.0,snowballstemmer==1.2.0,Sphinx==1.6.5.dev20190531,sphinxcontrib-websupport==1.0.1.dev20190422,SQLAlchemy==1.2.15,thrift==0.9.2,toml==0.10.0,tornado==5.1.1,tox==3.12.1,traceback2==1.4.0,Twisted==18.9.0,unittest-mixins==1.6,unittest2==1.1.0,urllib3==1.24.3,virtualenv==16.6.0,webencodings==0.5.1,Whoosh==2.7.4,zope.interface==4.6.0
py37 run-test-pre: PYTHONHASHSEED='1195974772'
--
1 failed, 776 passed, 20 skipped in 241.13 seconds
ERROR: InvocationError for command
/usr/src/RPM/BUILD/python-module-coverage-4.5.3/.tox/py37/bin/python igor.py
test_with_tracer c (exited with code 1)
___________________________________ summary ____________________________________
ERROR: py37: commands failed
python-module-flake8-3.7.7-alt1
No data to combine
ERROR: InvocationError for command
/usr/src/RPM/BUILD/python-module-flake8-3.7.7/.tox/py37/bin/coverage combine (exited
with code 1)
ERROR: invocation failed (exit code 1)
✖ FAIL py37 in 19.728 seconds
--
py27: commands succeeded
ERROR: py37: parallel child exit code 1
python-module-joblib-0.13.2-alt1
✔ OK py37 in 3 minutes, 2.314 seconds
ERROR: InvocationError for command
/usr/src/RPM/BUILD/python-module-joblib-0.13.2/.tox/py27/bin/python -m pytest -vra
(exited with code -15)
ERROR: invocation failed (exit code 1)
✖ FAIL py27 in 5 minutes, 13.883 seconds
___________________________________ summary ____________________________________
ERROR: py27: parallel child exit code 1
py37: commands succeeded
python-module-manhole-1.6.0-alt1
raise AssertionError(path + ' exists !')
AssertionError: /tmp/manhole-20060 exists !
DIED.
In atexit handler.
--
=============== 1 failed, 40 passed, 4 skipped in 281.56 seconds ===============
ERROR: InvocationError for command
/usr/src/RPM/BUILD/python-module-manhole-1.6.0/.tox/py37-normal-normal-nocov/bin/pytest
-vv --assert=plain (exited with code 1)
ERROR: invocation failed (exit code 1)
✖ FAIL py37-normal-normal-nocov in 4 minutes, 57.4 seconds
--
seconds, check_strings
E AssertionError: Waited 30.00secs but ['SUCCESS'] did not appear in output in the
given order !
----------------------------- Captured stdout call -----------------------------
--
raise AssertionError(path + ' exists !')
AssertionError: /tmp/manhole-18718 exists !
DIED.
In atexit handler.
--
=============== 1 failed, 40 passed, 4 skipped in 280.15 seconds ===============
ERROR: InvocationError for command
/usr/src/RPM/BUILD/python-module-manhole-1.6.0/.tox/py27-normal-normal-nocov/bin/pytest
-vv --assert=plain (exited with code 1)
ERROR: invocation failed (exit code 1)
✖ FAIL py27-normal-normal-nocov in 4 minutes, 57.638 seconds
___________________________________ summary ____________________________________
ERROR: py27-normal-normal-nocov: parallel child exit code 1
ERROR: py37-normal-normal-nocov: parallel child exit code 1
python-module-pebble-4.3.7-alt1.git20180228
collecting ... collected 41 items
test/test_process_pool_forkserver.py::TestProcessPool::test_process_pool_broken_initializer
FAILED [ 2%]
test/test_process_pool_forkserver.py::TestProcessPool::test_process_pool_callback PASSED
[ 4%]
--
> pool.schedule(function)
E AssertionError: RuntimeError not raised
test/test_process_pool_forkserver.py:212: AssertionError
----------------------------- Captured stderr call -----------------------------
ERROR:root:BOOM!
Traceback (most recent call last):
--
Exception: BOOM!
ERROR:root:BOOM!
Traceback (most recent call last):
--
Exception: BOOM!
ERROR:root:BOOM!
Traceback (most recent call last):
--
Exception: BOOM!
ERROR:root:BOOM!
Traceback (most recent call last):
--
Exception: BOOM!
ERROR:root:BOOM!
Traceback (most recent call last):
--
Exception: BOOM!
ERROR:root:BOOM!
Traceback (most recent call last):
--
Exception: BOOM!
ERROR:root:BOOM!
Traceback (most recent call last):
--
Exception: BOOM!
ERROR:root:BOOM!
Traceback (most recent call last):
python-module-tlslite-ng-0.7.5-alt1
File
"/usr/src/RPM/BUILD/python-module-tlslite-ng-0.7.5/tlslite/integration/httptlsconnection.py",
line 117, in connect
httplib.HTTPConnection.connect(self)
File "/usr/lib/python2.7/httplib.py", line 821, in connect
self.timeout, self.source_address)
File "/usr/lib/python2.7/socket.py", line 575, in create_connection
raise err
socket.error: [Errno 111] Connection refused
error: Bad exit status from /usr/src/tmp/rpm-tmp.75360 (%check)
RPM build errors:
Unparseable macro: %.py}
sgc-0.2.1-alt3
+ xvfb-run sh makedocs
_XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created.
The XKEYBOARD keymap compiler (xkbcomp) reports:
--
pygame.display.init()
error: Couldn't open X11 display
The full traceback has been saved in /usr/src/tmp/sphinx-err-UoQTru.log, if you want
to report the issue to the developers.
10 error logs REMOVED from the list
gettext-0.19.8.1-alt6
glibc-6:2.27-alt8
gprolog-1.4.4-alt2
libabigail-1.2-alt1
perl-HTTP-Proxy-0.304-alt2
python-module-pytest-benchmark-3.2.2-alt1
python-module-sigtools-0.1-alt2.b2.git20150217.1.1
python-module-svg.charts-3.0-alt2.1.1
python-module-zc.async-1.5.4-alt3.1.1
python-module-zc.monitor-0.3.1-alt2.1.1
Total 72 error logs.
reply other threads:[~2019-06-03 13:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190603130412.GA8552@gyle.altlinux.org \
--to=hiver@altlinux.org \
--cc=devel@lists.altlinux.org \
--cc=sisyphus-cybertalk@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Sisyphus cybertalk
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \
sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com
public-inbox-index sisyphus-cybertalk
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git