From: ALT beekeeper <hiver@altlinux.org> To: sisyphus-cybertalk@lists.altlinux.org Subject: [cyber] I: Sisyphus-20170213 x86_64 beehive_status: +18 -14 (947) Date: Mon, 13 Feb 2017 11:08:34 +0000 Message-ID: <20170213110834.GA4713@gyle.altlinux.org> (raw) 18 NEW error logs apache-commons-lang-0:2.6-alt5_18jpp8 testNextLong2(org.apache.commons.lang.math.RandomUtilsTest) Time elapsed: 0.007 sec <<< FAILURE! junit.framework.AssertionFailedError: mid point chi-square test -- will fail about 1 in 1000 times at junit.framework.Assert.fail(Assert.java:57) -- Results : Failed tests: org.apache.commons.lang.math.RandomUtilsTest#testNextLong2 mid point chi-squa... drbd-utils-8.9.0-alt3 # /usr/src/tmp/drbd-utils-buildroot/usr/sbin/drbd-overview: deparse failed. isPerl=0.0576183233425785. find-requires: ERROR: /usr/lib/rpm/perl.req failed error: /bin/sh failed error: Failed to find Requires RPM build errors: kdebindings-3.5.13.2-alt4 /usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope assert(tmpXSoff >= 0);\ -- DCOP.c:560:17: note: in expansion of macro 'XSRETURN_UNDEF' /usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope assert(tmpXSoff >= 0);\ -- DCOP.c: In function 'void XS_DCOP_detach(PerlInterpreter*, CV*)': /usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope assert(tmpXSoff >= 0);\ -- DCOP.c:585:17: note: in expansion of macro 'XSRETURN_UNDEF' /usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope assert(tmpXSoff >= 0);\ -- DCOP.c: In function 'void XS_DCOP_isAttached(PerlInterpreter*, CV*)': /usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope assert(tmpXSoff >= 0);\ -- DCOP.c:610:17: note: in expansion of macro 'XSRETURN_UNDEF' /usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope assert(tmpXSoff >= 0);\ -- DCOP.c: In function 'void XS_DCOP_appId(PerlInterpreter*, CV*)': /usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope assert(tmpXSoff >= 0);\ -- DCOP.c:704:17: note: in expansion of macro 'XSRETURN_UNDEF' /usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope assert(tmpXSoff >= 0);\ -- DCOP.c: In function 'void XS_DCOP_send(PerlInterpreter*, CV*)': /usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope assert(tmpXSoff >= 0);\ -- DCOP.c:740:17: note: in expansion of macro 'XSRETURN_UNDEF' /usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope assert(tmpXSoff >= 0);\ kf5-kwrited-5.8.4-alt1.S1 + read d ls: cannot access /usr/src/tmp/kf5-kwrited-buildroot//usr/share/kf5/k*5: No such file or directory + '[' -d /usr/src/tmp/kf5-kwrited-buildroot//usr/share/kf5/lib64 ']' -- Processing files: kf5-kwrited-5.8.4-alt1.S1 error: File not found: /usr/src/tmp/kf5-kwrited-buildroot/usr/lib/kf5/bin/kwrited error: File not found: /usr/src/tmp/kf5-kwrited-buildroot/etc/kf5/xdg/autostart/kwrited-autostart.desktop Executing(%doc): /bin/sh -e /usr/src/tmp/rpm-tmp.38124 libgupnp-igd-0.2.4-alt1 ../../test-driver: line 107: 25266 Segmentation fault "$@" > $log_file 2>&1 FAIL: gupnp-simple-igd make[5]: Entering directory `/usr/src/RPM/BUILD/gupnp-igd-0.2.4/tests/gtest' -- # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 See tests/gtest/test-suite.log librados2-perl-1.0.3-alt1 <13>Feb 13 02:08:12 rpmi: pve-cluster-4.0.48-alt7 1481276723 installed error reading information on service pve-cluster: No such file or directory <13>Feb 13 02:08:12 rpmi: python-modules-hotshot-2.7.11-alt3 1460726088 installed -- + make DESTDIR=/usr/src/tmp/librados2-perl-buildroot install make: dpkg-architecture: Command not found make: Entering directory `/usr/src/RPM/BUILD/librados2-perl-1.0.3' cat: .git/refs/heads/master: No such file or directory make: Entering directory `/usr/src/RPM/BUILD/librados2-perl-1.0.3' -- Can't locate PVE.pm in @INC (you may need to install the PVE module) (@INC contains: /usr/lib/rpm /usr/src/tmp/librados2-perl-buildroot/usr/lib64/perl5 /usr/src/tmp/librados2-perl-buildroot/usr/share/perl5 /usr/src/tmp/librados2-perl-buildroot/usr/lib64/perl5 /usr/src/tmp/librados2-perl-buildroot/usr/share/perl5 /usr/lib64/perl5 /usr/share/perl5 /usr/lib64/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl /usr/local/lib64/perl/5.24 /usr/local/share/perl/5.24 /usr/lib64/perl5 /usr/share/perl5 /usr/lib64/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .). BEGIN failed--compilation aborted. # /usr/src/tmp/librados2-perl-buildroot/usr/share/perl5/PVE/RADOS.pm: deparse failed. prefix=/usr/src/tmp/librados2-perl-buildroot/usr/share/perl5 find-requires: ERROR: /usr/lib/rpm/perl.req failed error: /bin/sh failed error: Failed to find Requires RPM build errors: mumble-1.2.8-alt2.1.1 g++ -c -include release/mumble -pipe -pipe -Wall -g -O2 -fpermissive -Wfatal-errors -fvisibility=hidden -Wshadow -Woverloaded-virtual -Wold-style-cast -Wconversion -Wsign-compare -Wextra -O2 -Wall -W -D_REENTRANT -DQT_WEBKIT -DPLUGIN_PATH=/usr/lib64/mumble -DDEFAULT_SOUNDSYSTEM=PulseAudio -DRESTRICT=__restrict__ -D_FORTIFY_SOURCE=2 -DMUMBLE_VERSION_STRING=1.2.8 -DMUMBLE -DNO_CRASH_REPORT -DUSE_OPUS -DUSE_ALSA -DUSE_PULSEAUDIO -DUSE_BONJOUR -DUSE_DBUS -DUSE_SPEECHD -DNO_UPDATE_CHECK -DUSING_BUNDLED_QT_TRANSLATIONS -D_REENTRANT -DQT_NO_DEBUG -DQT_SVG_LIB -DQT_SQL_LIB -DQT_XML_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt4/mkspecs/linux-g++ -I. -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtNetwork -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtSql -I/usr/include/qt4/QtSvg -I/usr/include/qt4 -I/usr/include/qt4/QtDBus -I../../src -I. -I../bonjour -I/usr/include/speex -I../../celt-0.7.0-src/libcelt -Irelease -I/usr/include/opus -I/usr/include/alsa -I/usr/include/avahi-compat-libdns_sd -I/usr/include/speech-dispatcher/speech-dispatcher -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I. -o release/TextToSpeech_unix.o TextToSpeech_unix.cpp TextToSpeech_unix.cpp:36:24: fatal error: libspeechd.h: No such file or directory #include <libspeechd.h> opm-wh_nagios-2.3-alt2 Compilation failed in require at /usr/src/tmp/opm-wh_nagios-buildroot/usr/share/opm-core/ui/lib/OPM/WhNagios.pm line 97. BEGIN failed--compilation aborted at /usr/src/tmp/opm-wh_nagios-buildroot/usr/share/opm-core/ui/lib/OPM/WhNagios.pm line 97. # perl(OPM/WhNagios/Nagios.pm) at line 97 (depth 3) not loaded at BEGIN SKIP -- Compilation failed in require at /usr/src/tmp/opm-wh_nagios-buildroot/usr/share/opm-core/ui/lib/OPM/WhNagios.pm line 97. BEGIN failed--compilation aborted at /usr/src/tmp/opm-wh_nagios-buildroot/usr/share/opm-core/ui/lib/OPM/WhNagios.pm line 97. # perl(OPM/WhNagios/Nagios.pm) at line 97 (depth 3) not loaded at BEGIN SKIP # /usr/src/tmp/opm-wh_nagios-buildroot/usr/share/opm-core/ui/lib/OPM/WhNagios.pm: deparse failed. prefix=/usr/src/tmp/opm-wh_nagios-buildroot/usr/share/opm-core/ui/lib find-requires: ERROR: /usr/lib/rpm/perl.req failed error: /bin/sh failed error: Failed to find Requires RPM build errors: perl-Debug-Client-0.29-alt2 t/07-initialize.t ..... ok # Failed test 'STDERR is empty' # at t/08-io.t line 61. # got: 'Can't figure out your console, using stdin: No such file or directory # expected: '' # Failed test 'STDERR has Two' # at t/08-io.t line 77. # got: 'Can't figure out your console, using stdin: No such file or directory # Two # expected: 'Two # Failed test 'STDERR has Two' # at t/08-io.t line 93. # got: 'Can't figure out your console, using stdin: No such file or directory # Two -- t/08-io.t (Wstat: 768 Tests: 12 Failed: 3) Failed tests: 6, 9, 12 Non-zero exit status: 3 -- Result: FAIL Failed 1/32 test programs. 3/181 subtests failed. make: *** [test_dynamic] Error 255 perl-Filter-Simple-0.91-alt1 Result: FAIL Failed 3/6 test programs. 0/11 subtests failed. make: *** [test_dynamic] Error 255 perl-Net-Ping-2.56-alt1 t/150_syn_inst.t ...... ok # Failed test 'Make sure it died for a good excuse' # at t/190_alarm.t line 51. -- t/190_alarm.t (Wstat: 256 Tests: 6 Failed: 1) Failed test: 6 Non-zero exit status: 1 -- Result: FAIL Failed 1/16 test programs. 1/67 subtests failed. make: *** [test_dynamic] Error 255 perl-PDF-API2-2.031-alt1 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'use PDF::API2::UniWrap;' # at t/00-all-usable.t line 30. # Tried to use 'PDF::API2::UniWrap'. # Error: Can't locate Unicode/UCD.pm in @INC (you may need to install the Unicode::UCD module) (@INC contains: /usr/src/RPM/BUILD/PDF-API2-2.031/blib/lib /usr/src/RPM/BUILD/PDF-API2-2.031/blib/arch /usr/local/lib64/perl/5.24 /usr/local/share/perl/5.24 /usr/lib64/perl5 /usr/share/perl5 /usr/lib64/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at /usr/src/RPM/BUILD/PDF-API2-2.031/blib/lib/PDF/API2/UniWrap.pm line 18. # BEGIN failed--compilation aborted at /usr/src/RPM/BUILD/PDF-API2-2.031/blib/lib/PDF/API2/UniWrap.pm line 18. # Compilation failed in require at t/00-all-usable.t line 30. # BEGIN failed--compilation aborted at t/00-all-usable.t line 30. # Failed test 'use PDF::API2::Resource::Font::SynFont;' # at t/00-all-usable.t line 30. # Tried to use 'PDF::API2::Resource::Font::SynFont'. # Error: Can't locate Unicode/UCD.pm in @INC (you may need to install the Unicode::UCD module) (@INC contains: /usr/src/RPM/BUILD/PDF-API2-2.031/blib/lib /usr/src/RPM/BUILD/PDF-API2-2.031/blib/arch /usr/local/lib64/perl/5.24 /usr/local/share/perl/5.24 /usr/lib64/perl5 /usr/share/perl5 /usr/lib64/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at /usr/src/RPM/BUILD/PDF-API2-2.031/blib/lib/PDF/API2/Resource/Font/SynFont.pm line 11. # BEGIN failed--compilation aborted at /usr/src/RPM/BUILD/PDF-API2-2.031/blib/lib/PDF/API2/Resource/Font/SynFont.pm line 11. # Compilation failed in require at t/00-all-usable.t line 30. # BEGIN failed--compilation aborted at t/00-all-usable.t line 30. # Looks like you failed 2 tests of 103. -- t/00-all-usable.t (Wstat: 512 Tests: 103 Failed: 2) Failed tests: 12, 44 Non-zero exit status: 2 -- Result: FAIL Failed 1/34 test programs. 2/505 subtests failed. make: *** [test_dynamic] Error 255 perl-Test-Block-0.13-alt1 t/bad_args.t ....... ok # Failed test 'too few tests' # at t/block.t line 22. # STDERR is: # # Failed test 'block 2 expected 2 test(s) and ran 1' # # at t/block.t line 20. -- # as expected # Failed test 'too many tests' # at t/block.t line 34. # STDERR is: # # Failed test 'block 3 expected 1 test(s) and ran 2' # # at t/block.t line 32. -- # as expected # Failed test 'named block' # at t/block.t line 65. # STDERR is: # # Failed test 'block 'foo' expected 2 test(s) and ran 1' # # at t/block.t line 63. -- t/import.t ......... ok # Failed test '$Test::Block::Plan' # at t/variable.t line 23. # STDERR is: # # Failed test 'block 'inner' expected 1 test(s) and ran 0' # # at /usr/share/perl5/Tie/Scalar.pm line 157. -- t/block.t (Wstat: 0 Tests: 6 Failed: 3) Failed tests: 2-3, 6 t/variable.t (Wstat: 0 Tests: 1 Failed: 1) Failed test: 1 Files=6, Tests=26, 1 wallclock secs ( 0.05 usr 0.01 sys + 0.32 cusr 0.04 csys = 0.42 CPU) pve-docs-4.4.1-alt1 <13>Feb 13 07:24:42 rpmi: dlm-4.0.5-alt1 1473898277 installed error reading information on service dlm: No such file or directory <13>Feb 13 07:24:42 rpmi: clvm-2.02.168-alt1 1481122714 installed -- <13>Feb 13 07:24:43 rpmi: pve-cluster-4.0.48-alt7 1481276723 installed error reading information on service pve-cluster: No such file or directory <13>Feb 13 07:24:43 rpmi: pve-access-control-4.0.19-alt7 1481276723 installed -- <13>Feb 13 07:24:43 rpmi: pve-firewall-2.0.33-alt4 1481539806 installed error reading information on service pve-firewall: No such file or directory error reading information on service pvefw-logger: No such file or directory <13>Feb 13 07:24:43 rpmi: pve-ha-manager-1.0.38-alt4 1481539806 installed -- <13>Feb 13 07:24:43 rpmi: pve-manager-4.4.1-alt4 1481539806 installed error reading information on service pvedaemon: No such file or directory error reading information on service pveproxy: No such file or directory error reading information on service pvestatd: No such file or directory error reading information on service spiceproxy: No such file or directory <13>Feb 13 07:24:43 rpmi: asciidoc-a2x-8.6.9-alt1 1386063340 installed -- + make cat: .git/refs/heads/master: No such file or directory make: dpkg-architecture: Command not found make: Entering directory `/usr/src/RPM/BUILD/pve-docs-4.4.1' pve-manager-4.4.1-alt4 + make make: dpkg-architecture: Command not found make: Entering directory `/usr/src/RPM/BUILD/pve/pve-manager' cat: .git/refs/heads/master: No such file or directory make: Entering directory `/usr/src/RPM/BUILD/pve/pve-manager' pve-storage-4.0.70-alt1 <13>Feb 13 03:52:40 rpmi: pve-cluster-4.0.48-alt7 1481276723 installed error reading information on service pve-cluster: No such file or directory <13>Feb 13 03:52:40 rpmi: pve-access-control-4.0.19-alt7 1481276723 installed -- + make DESTDIR=/usr/src/tmp/pve-storage-buildroot install cat: .git/refs/heads/master: No such file or directory make: Entering directory `/usr/src/RPM/BUILD/pve-storage' telepathy-rakia-0.8.0-alt1 raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on any:9829: [Errno 98] Address already in use. FAIL: voip/calltest.py (1) Testing voip/ringing-queued.py ... vargus-0.9.7-alt1 # /usr/src/tmp/vargus-buildroot/usr/bin/vargus: deparse failed. isPerl=0.040982019698473. find-requires: ERROR: /usr/lib/rpm/perl.req failed error: /bin/sh failed error: Failed to find Requires RPM build errors: 14 error logs REMOVED from the list Mayavi-4.4.0-alt1.git20150422 boswars-2.6.1-alt1.1.qa1 eiskaltdcpp-2.2.8-alt1.qa2 ff-clone-1.1-alt2 fillets-ng-1.0.1-alt1 geany-plugins-1.28-alt1 jvgs-0.5-alt2 love7-0.7.2-alt2 love8-0.8.0-alt2 perl-HTML-FormFu-MultiForm-1.00-alt1 powdertoy-1:91.5.330-alt1 premake-4.3-alt1 stone_soup-0.18.1-alt1 verlihub-plugins-lua51-1.8.1-alt1.qa1.1 Total 947 error logs.
reply other threads:[~2017-02-13 11:08 UTC|newest] Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170213110834.GA4713@gyle.altlinux.org \ --to=hiver@altlinux.org \ --cc=devel@lists.altlinux.org \ --cc=sisyphus-cybertalk@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Sisyphus cybertalk This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \ sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com public-inbox-index sisyphus-cybertalk Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk AGPL code for this site: git clone https://public-inbox.org/public-inbox.git