From: Leonid Krivoshein <klark.devel@gmail.com> To: make-initrd@lists.altlinux.org Subject: Re: [make-initrd] [PATCH v6 21/22] bootchain-core: adds ability to bring the daemon to the foreground Date: Sat, 6 Nov 2021 17:57:44 +0300 Message-ID: <a39d3d7a-1f20-b393-7d40-604696d7edd4@gmail.com> (raw) In-Reply-To: <20211106132213.2qojchid4yqymcvb@example.org> 06.11.2021 16:22, Alexey Gladkov пишет: > On Tue, Oct 26, 2021 at 11:29:43PM +0300, Leonid Krivoshein wrote: >> 26.10.2021 22:16, Alexey Gladkov пишет: >>> On Sun, Oct 24, 2021 at 08:23:23PM +0300, Leonid Krivoshein wrote: >>>> Also introduces configuration parameter BC_FGVT_ACTIVATE and new pseudo-step >>>> "fg". This is only works together with the "bootchain-interactive" feature >>>> included to initramfs. Jointly features "bootchain-core" and "bootchain- >>>> interactive" they lay the foundation for building simple text installers >>>> in the stage1. >>> Напомни пожалуйста, а что мешает демону из бэкграунда писать на указанный >>> терминал и читать с него ? >>> >>> Типа вот так: >>> >>> exec </dev/tty2 >/dev/tty2 2>&1 >> Там ровно этот код и отрабатывает. Суть усложнения концепции заключалась в >> другом: хотелось получить выделенный интерактивный терминал с диалогами, >> отличный от tty1, и активировать его, при необходимости, по таймауту или >> сразу. Чтобы быстрый процесс загрузки не мелькал перед глазами, если в этом >> нет необходимости. И чтобы вывод демонов make-initrd не смешивался на tty1 с >> диалогами. > Так я же и написал tty2. Вопрос был о том, зачем демону перезапускаться ? > Он же может перенаправить свой ввод-вывод на любой терминал. Перенаправить-то он может свой ввод/вывод, но на переднем плане (на tty2) продолжает работать одна часть (перезапущенная), в то время как другая часть следит за истечением таймаута, чтобы переключиться на этот терминал (tty2). Есть условия, при которых мы должны переключаться на tty2 сразу, но данное разделение и перезапуск через openvt позволяют реализовать концепцию отложенного переключения на tty2. Иначе мы должны были бы переключиться туда немедленно и наблюдать все быстро проскакивающие диалоги, например, в течение первых 3-6 секунд загрузки altboot. Данное концептуальное усложнение позволило избавиться от мелькания диалогов на ранней стадии загрузки, когда никакого ввода от пользователя не требуется, и вся загрузка укладывается в отведённые 8 секунд таймаута. >> Переход в интерактивный режим был разделён на две части: IM_exec() и >> IM_activate() подобно тому, как приложения запускаются в NIX-системах через >> fork() и exec(). Исходно запущенный демон запускает вспомогательный терминал >> для отладки и есть код, который ждёт его завершения. Изначально демон был >> вообще разделён на две части, перезапускалась только вторая часть. Причина >> -- в использовании openvt ... так как другие варианты не подходили. >> >> Алексей Шепляков предложил тут хорошую идею: использовать для тех же целей >> screen или tmux. Собственно задача: восстановить после себя консоль. Вариант >> идеальный, но у меня пока не вышло из-за проблем с настройкой utf8 в stage1, >> там одно другое цепляет, есть конфликты с plymouth и kbd, который сейчас, >> кажется, совсем нерабочий. > Кто совсем нерабочий ? make-initrd с фичей kbd у меня не собирается, фейлится. Вообще не проблема руками настроить консоль и utf8. Но проблемы начинаются, когда это начинают делать сразу несколько фич, когда с ресурсами типа tty2 или console начинают работать несколько разных фич, типа plymouth, kbd, rdshell. Надо с этим чего-то придумать на верхнем уровне make-initrd. Некий общий аналог console-sh-functions, через API которого можно будет избежать гонок и конфликтов при инициализации консолей. > >> Так что переключение на другие консоли через >> openvt -- пока единственная рабочая, но не лучшая реализация, надо обсудить, >> как это улучшить, не меняя API. >> >> >>>> See README.md for more details. >>>> >>>> Signed-off-by: Leonid Krivoshein <klark.devel@gmail.com> >>>> --- >>>> features/bootchain-core/README.md | 16 +++++++ >>>> .../data/bin/bootchain-sh-functions | 2 + >>>> features/bootchain-core/data/sbin/chaind | 45 ++++++++++++++++--- >>>> 3 files changed, 58 insertions(+), 5 deletions(-) >>>> >>>> diff --git a/features/bootchain-core/README.md b/features/bootchain-core/README.md >>>> index ab89181..943b4b0 100644 >>>> --- a/features/bootchain-core/README.md >>>> +++ b/features/bootchain-core/README.md >>>> @@ -50,11 +50,18 @@ us to optimize fill in `initramfs` only which we are need. >>>> - Modularity: loading methods are initially separated from the common >>>> code and daemon. >>>> +- Provides the ability to bring the daemon to the foreground at any time. This >>>> + restarts the `chaind` process on a specific terminal, although initially the >>>> + daemon is started in the background. >>>> - Some steps (actions) are built directly into the code of the main loop >>>> of the `chaind` daemon, external scripts are not called to execute them. >>>> Such pseudo-steps allow you to control, basically, the internal state of the >>>> daemon and should not be taken into account in the boot chain, as if they are >>>> hidden. >>>> +- Optionally, the daemon can work in conjunction with the `bootchain-interactive` >>>> + feature, can move to the foreground and continue working on a specific terminal, >>>> + by default, tty2. Jointly features `bootchain-core` and `bootchain-interactive` >>>> + they lay the foundation for building simple text installers in stage1. >>>> - The `chaind` daemon allows you to overload the chain with a new set of steps, >>>> thanks to this, you can change the logic of work "on the fly", support loops >>>> and conditional jumps, in text dialogs it is an opportunity to go back. >>>> @@ -147,6 +154,11 @@ parameters: >>>> should be output in the background. By default, the value is 3, respectively, >>>> the log is output to tty3. An empty value allows you to disable log output >>>> to any terminal. >>>> +- `BC_FGVT_ACTIVATE` - delay in seconds before activating the interactive >>>> + terminal, by default tty2 is activated after 2 seconds in debug mode >>>> + or after 8 seconds in normal mode. An empty value instructs to activate >>>> + the interactive terminal immediately. This configuration option only works >>>> + together with the `bootchain-interactive` features included in initramfs. >>>> - `BC_LOGFILE` - the full path to the log file or the name of a special device, >>>> to which debugging messages will be output. In NATIVE mode, the default value >>>> is `/var/log/chaind.log`, in COMPATIBILITY mode with `pipeline` the default >>>> @@ -165,6 +177,10 @@ embedded in the code of the main loop of the `boot chain-loop` daemon, do >>>> not need additional parameters and should not be taken into account when >>>> addressing, as if they are hidden. >>>> +- `fg` - provides the transfer of the daemon to interactive mode when building >>>> + initramfs with `bootchain-interactive` features. The `bootchain-core` itself >>>> + is not interactivity required, but some other steps may need it, such as >>>> + `altboot`. >>>> - `noop` - does not perform any actions and is designed to pull off the results >>>> on the <OUT> of the previous step from the <IN> of the next step, which can >>>> be useful, for example, when we don`t want the results of the `waitdev` step >>>> diff --git a/features/bootchain-core/data/bin/bootchain-sh-functions b/features/bootchain-core/data/bin/bootchain-sh-functions >>>> index 3a9ec6b..743a8f9 100644 >>>> --- a/features/bootchain-core/data/bin/bootchain-sh-functions >>>> +++ b/features/bootchain-core/data/bin/bootchain-sh-functions >>>> @@ -25,6 +25,8 @@ else >>>> pipeline_mode= >>>> fi >>>> +[ -n "$BC_DEBUG" ] && BC_FGVT_ACTIVATE=1 || >>>> + BC_FGVT_ACTIVATE="${BC_FGVT_ACTIVATE:-7}" >>>> BC_NEXTCHAIN=/.initrd/bootchain/bootchain.next >>>> BC_PASSED=/.initrd/bootchain/passed >>>> handlerdir=/lib/bootchain >>>> diff --git a/features/bootchain-core/data/sbin/chaind b/features/bootchain-core/data/sbin/chaind >>>> index e8ce94a..68a1aae 100755 >>>> --- a/features/bootchain-core/data/sbin/chaind >>>> +++ b/features/bootchain-core/data/sbin/chaind >>>> @@ -2,11 +2,12 @@ >>>> . bootchain-sh-functions >>>> -bcretry=1 >>>> +bcretry="${bcretry:-1}" >>>> pidfile="/var/run/$PROG.pid" >>>> -chainsteps="$BOOTCHAIN" >>>> -stepnum=0 >>>> -prevdir= >>>> +chainsteps="${chainsteps-}" >>>> +stepnum="${stepnum:-0}" >>>> +prevdir="${prevdir-}" >>>> +BC_IM_supported= >>>> exit_handler() >>>> @@ -25,6 +26,8 @@ debug() >>>> } >>>> +# Only when daemon started first time >>>> +if [ "x${1-}" != "x--foreground" ]; then >>> "x" тут признак чего ? не надо этого. >> Признак Debian-way! :-) Ну, я боялся, что в этом месте "--" может быть не >> так истолковано. >> >> >>>> [ ! -f "$pidfile" ] || >>>> fatal "already running" >>>> set_cleanup_handler exit_handler >>>> @@ -57,12 +60,44 @@ debug() >>>> mountpoint -q -- "$mntdir" || >>>> run mount -t tmpfs tmpfs "$mntdir" ||: >>>> + chainsteps="$BOOTCHAIN" >>>> +fi >>>> + >>>> +# Check that interactive mode supports >>>> +if has_feature bootchain-interactive; then >>>> + . interactive-sh-functions >>>> + >>>> + [ "x${1-}" != "x--foreground" ] || >>>> + IM_activate "$BC_FGVT_ACTIVATE" "$BC_LOGFILE" >>>> + BC_IM_supported=1 >>>> +fi >>>> + >>>> rc=0 >>>> while [ -n "$chainsteps" ]; do >>>> name="${chainsteps%%,*}" >>>> exe="$handlerdir/$name" >>>> - if [ "$name" = noop ]; then >>>> + if [ "$name" = fg ]; then >>>> + [ -n "$BC_IM_supported" ] || >>>> + fatal "bootchain-interactive feature required" >>>> + assign "callnum" "\${callnum_$name:-0}" >>>> + chainsteps="${chainsteps#$name}" >>>> + chainsteps="${chainsteps#,}" >>>> + >>>> + if IM_is_active; then >>>> + message "[$callnum] Step '$name' has ignored" >>>> + else >>>> + message "[$callnum] Switching to foreground" >>>> + >>>> + callnum=$((1 + $callnum)) >>>> + assign "callnum_$name" "\$callnum" >>>> + >>>> + export stepnum chainsteps callnum_fg prevdir bcretry >>>> + >>>> + IM_exec "$0" --foreground >>>> + fi >>>> + >>>> + elif [ "$name" = noop ]; then >>>> chainsteps="${chainsteps#$name}" >>>> chainsteps="${chainsteps#,}" >>>> prevdir= >>>> -- >>>> 2.24.1 >>>> >>>> _______________________________________________ >>>> Make-initrd mailing list >>>> Make-initrd@lists.altlinux.org >>>> https://lists.altlinux.org/mailman/listinfo/make-initrd >>>> >> -- >> Best regards, >> Leonid Krivoshein. >> >> _______________________________________________ >> Make-initrd mailing list >> Make-initrd@lists.altlinux.org >> https://lists.altlinux.org/mailman/listinfo/make-initrd -- Best regards, Leonid Krivoshein.
next prev parent reply other threads:[~2021-11-06 14:57 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-10-26 19:16 ` Alexey Gladkov 2021-10-26 20:29 ` Leonid Krivoshein 2021-11-06 13:22 ` Alexey Gladkov 2021-11-06 14:57 ` Leonid Krivoshein [this message] 2021-11-06 15:05 ` Антон Мидюков 2021-11-06 15:25 ` Alexey Gladkov 2021-11-06 15:26 ` Антон Мидюков 2021-11-06 15:33 ` Alexey Gladkov 2021-11-06 15:47 ` Leonid Krivoshein 2021-11-06 15:54 ` Антон Мидюков 2021-11-06 16:19 ` Leonid Krivoshein 2021-11-06 15:57 ` Alexey Gladkov 2021-11-06 16:06 ` Антон Мидюков 2021-11-06 16:25 ` Leonid Krivoshein 2021-11-06 17:30 ` Leonid Krivoshein 2021-11-06 18:16 ` Leonid Krivoshein 2021-11-06 17:32 ` Alexey Gladkov 2021-11-06 15:22 ` Alexey Gladkov 2021-11-06 16:52 ` Leonid Krivoshein 2021-11-06 17:41 ` Alexey Gladkov 2021-11-06 18:03 ` Leonid Krivoshein 2021-11-06 18:29 ` Alexey Gladkov 2021-11-06 19:32 ` Leonid Krivoshein 2021-11-06 19:54 ` Leonid Krivoshein 2021-11-08 13:09 ` Alexey Gladkov 2021-11-08 16:08 ` Leonid Krivoshein 2021-11-09 12:17 ` Alexey Gladkov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=a39d3d7a-1f20-b393-7d40-604696d7edd4@gmail.com \ --to=klark.devel@gmail.com \ --cc=make-initrd@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Make-initrd development discussion This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/make-initrd/0 make-initrd/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 make-initrd make-initrd/ http://lore.altlinux.org/make-initrd \ make-initrd@lists.altlinux.org make-initrd@lists.altlinux.ru make-initrd@lists.altlinux.com public-inbox-index make-initrd Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.make-initrd AGPL code for this site: git clone https://public-inbox.org/public-inbox.git