Linux version 2.4.26-std-up-alt6 (builder@mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt6)) #1 Tue Aug 3 21:45:23 MSD 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000effc000 (usable) BIOS-e820: 000000000effc000 - 000000000efff000 (ACPI data) BIOS-e820: 000000000efff000 - 000000000f000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 239MB LOWMEM available. On node 0 totalpages: 61436 zone(0): 4096 pages. zone(1): 57340 pages. zone(2): 0 pages. DMI 2.3 present. 40 structures occupying 1200 bytes. DMI table at 0x000F2F40. BIOS Vendor: Award Software, Inc. BIOS Version: ASUS TUSI-M ACPI BIOS Revision 1015 BIOS Release: 04/10/2002 System Vendor: System Manufacturer Product Name: System Name Version: System Version Serial Number: SYS-1234567890 Board Vendor: ASUSTeK Computer INC. Board Name: TUSI-M Board Version: REV 1.xx ACPI: RSDP (v000 ASUS ) @ 0x000f6c90 ACPI: RSDT (v001 ASUS TUSI-M 0x30303031 MSFT 0x31313031) @ 0x0effc000 ACPI: FADT (v001 ASUS TUSI-M 0x30303031 MSFT 0x31313031) @ 0x0effc080 ACPI: BOOT (v001 ASUS TUSI-M 0x30303031 MSFT 0x31313031) @ 0x0effc040 ACPI: DSDT (v001 ASUS TUSI-M 0x00001000 MSFT 0x0100000b) @ 0x00000000 Kernel command line: auto BOOT_IMAGE=linux-up ro root=305 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1002.285 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1998.84 BogoMIPS Memory: 240112k/245744k available (1235k kernel code, 5244k reserved, 508k data, 136k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel(R) Celeron(TM) CPU 1000MHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1002.2970 MHz. ..... host bus clock speed is 100.2296 MHz. cpu: 0, clocks: 1002296, slice: 501148 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 PCI: PCI BIOS revision 2.10 entry at 0xf0eb0, last bus=1 PCI: Using configuration type 1 Looking for DSDT in initrd ... not found! ACPI: IRQ9 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: Using ACPI for IRQ routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd kinoded started VFS: Disk quotas vdquot_6.5.1 vesafb: framebuffer at 0xf0000000, mapped to 0xcf806000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at cb9d:0008 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (1024x768, 68332 bytes, v2). Console: switching to colour frame buffer device 106x34 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 00:00.1 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS630 ATA 100 (1st gen) controller ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: ST380021A, ATA DISK drive hdb: ST340810A, ATA DISK drive blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff) blk: queue c0303b1c, I/O limit 4095Mb (mask 0xffffffff) hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive hdd: _NEC CD-RW NR-7900A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100) hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > hdb: hdb1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 166k freed VFS: Mounted root (romfs filesystem) readonly. Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 136k freed Executing init=/sbin/init Adding Swap: 248968k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal Real Time Clock Driver v1.10f Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 189M agpgart: Detected SiS 630 chipset agpgart: AGP aperture is 64M @ 0xe8000000 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. subfs: subfs-2.4 version 0.9. NTFS driver 2.1.6b [Flags: R/O MODULE]. NTFS volume version 3.1. NTFS volume version 3.1. [drm] Initialized sis 1.1.0 20030826 on minor 0: SiS 630 slmdm: version 2.7.10 Feb 4 2003 15:18:20 (Smart Link Ltd.). slmdm: country set is 0xb5 (USA). Smart Link AMRMO modem. Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 0 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 1 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 2 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 3 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 4 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 5 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 6 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 7 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 8 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 9 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 10 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 11 changed to on SCSI subsystem driver Revision: 1.00 hdc: attached ide-cdrom driver. hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 hdd: attached ide-cdrom driver. hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)