* [Hardware] Laserjet 1000 + foo2js = Media tray empty!
@ 2004-12-24 10:17 Alexander Volkov
2004-12-24 10:30 ` Andriy Dobrovol's'kii
0 siblings, 1 reply; 2+ messages in thread
From: Alexander Volkov @ 2004-12-24 10:17 UTC (permalink / raw)
To: hardware
Здравствуйте.
ALM2.4 на VX чипсете, сабжевая связка. Прошивка грузится нормально при
включении принтера, а печатать не хочет:
Media tray empty!
Dec 24 12:29:00 zprint kernel: hub.c: new USB device 00:07.2-1, assigned
address
4
Dec 24 12:29:00 zprint kernel: printer.c: usblp0: USB Bidirectional
printer dev
4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0517
Dec 24 12:29:14 zprint /etc/hotplug/usb/hplj1000: loading HP LaserJet 1000
firmw
are /usr/share/foo2zjs/firmware/sihp1000.dl to /dev/usb/lp0 ...
Dec 24 12:29:18 zprint /etc/hotplug/usb/hplj1000: ... download successful.
на linuxprinting.org нашёл подобную тему в форуме - там проблема была в
dash - /bin/sh указывал на неё.
Есть у кого какие мысли?
--
Best regards,
Alexander
VAA43-RIPN
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Hardware] Laserjet 1000 + foo2js = Media tray empty!
2004-12-24 10:17 [Hardware] Laserjet 1000 + foo2js = Media tray empty! Alexander Volkov
@ 2004-12-24 10:30 ` Andriy Dobrovol's'kii
0 siblings, 0 replies; 2+ messages in thread
From: Andriy Dobrovol's'kii @ 2004-12-24 10:30 UTC (permalink / raw)
To: hardware
Alexander Volkov wrote:
> Здравствуйте.
> ALM2.4 на VX чипсете, сабжевая связка. Прошивка грузится нормально при
> включении принтера, а печатать не хочет:
> Media tray empty!
>
> Dec 24 12:29:00 zprint kernel: hub.c: new USB device 00:07.2-1,
> assigned address
> 4
> Dec 24 12:29:00 zprint kernel: printer.c: usblp0: USB Bidirectional
> printer dev
> 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0517
> Dec 24 12:29:14 zprint /etc/hotplug/usb/hplj1000: loading HP LaserJet
> 1000 firmw
> are /usr/share/foo2zjs/firmware/sihp1000.dl to /dev/usb/lp0 ...
> Dec 24 12:29:18 zprint /etc/hotplug/usb/hplj1000: ... download successful.
>
> на linuxprinting.org нашёл подобную тему в форуме - там проблема была в
> dash - /bin/sh указывал на неё.
> Есть у кого какие мысли?
Тоже столкнулся. Решения не знаю. Некогда было искать. Там просто
поменяли принтер на 1300. Как с ним, пока не знаю. Не подключал ещё.
--
Rgrds,
Andriy
*********************************************************************
email: dobr at iop dot kiev dot ua Kyiv, Ukraine
Phone: (380-44) 265-7824 Department of Gas Electronics
Fax: (380-44) 265-2329 Institute of Physics of NASU
*********************************************************************
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-12-24 10:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-12-24 10:17 [Hardware] Laserjet 1000 + foo2js = Media tray empty! Alexander Volkov
2004-12-24 10:30 ` Andriy Dobrovol's'kii
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git