* [Hardware] fujitsu siemens Primergy TX300 S4 raid monitoring
@ 2008-12-11 13:54 Vladimir V. Kamarzin
2008-12-11 15:01 ` Konstantin A. Lepikhov
2008-12-13 14:39 ` Michael Shigorin
0 siblings, 2 replies; 6+ messages in thread
From: Vladimir V. Kamarzin @ 2008-12-11 13:54 UTC (permalink / raw)
To: hardware
Hi
Имеется сервер Primergy TX300 S4, в котором есть SAS-контроллер
08:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 10f9
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at f9180000 (64-bit, non-prefetchable) [size=256K]
I/O ports at 3000 [size=256]
Memory at f9140000 (64-bit, non-prefetchable) [size=256K]
[virtual] Expansion ROM at c2000000 [disabled] [size=128K]
Capabilities: [b0] Express Endpoint IRQ 0
Capabilities: [c4] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Capabilities: [d4] MSI-X: Enable- Mask- TabSize=4
Capabilities: [e0] Power Management version 2
Capabilities: [ec] Vital Product Data
Capabilities: [100] Power Budgeting
Средствами контроллера создан RAID 10.
Собственно вопрос: чем мониторить состояние массива? Например, какая-нибудь
простая утилита, которую можно запускать по cron-у, в виде демона или из
мониторилки (zabbix).
Смотрел MegaCli, но там вроде нет такого.
--
vvk
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Hardware] fujitsu siemens Primergy TX300 S4 raid monitoring
2008-12-11 13:54 [Hardware] fujitsu siemens Primergy TX300 S4 raid monitoring Vladimir V. Kamarzin
@ 2008-12-11 15:01 ` Konstantin A. Lepikhov
2008-12-16 12:58 ` Vladimir V. Kamarzin
2008-12-13 14:39 ` Michael Shigorin
1 sibling, 1 reply; 6+ messages in thread
From: Konstantin A. Lepikhov @ 2008-12-11 15:01 UTC (permalink / raw)
To: hardware
Hi Vladimir!
Thursday 11, at 06:54:48 PM you wrote:
> Hi
>
> Имеется сервер Primergy TX300 S4, в котором есть SAS-контроллер
>
> 08:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
> Subsystem: Fujitsu Siemens Computer GmbH Unknown device 10f9
> Flags: bus master, fast devsel, latency 0, IRQ 169
> Memory at f9180000 (64-bit, non-prefetchable) [size=256K]
> I/O ports at 3000 [size=256]
> Memory at f9140000 (64-bit, non-prefetchable) [size=256K]
> [virtual] Expansion ROM at c2000000 [disabled] [size=128K]
> Capabilities: [b0] Express Endpoint IRQ 0
> Capabilities: [c4] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
> Capabilities: [d4] MSI-X: Enable- Mask- TabSize=4
> Capabilities: [e0] Power Management version 2
> Capabilities: [ec] Vital Product Data
> Capabilities: [100] Power Budgeting
>
> Средствами контроллера создан RAID 10.
>
> Собственно вопрос: чем мониторить состояние массива? Например, какая-нибудь
> простая утилита, которую можно запускать по cron-у, в виде демона или из
> мониторилки (zabbix).
>
> Смотрел MegaCli, но там вроде нет такого.
есть еще http://megactl.sourceforge.net, правда умеет ли она мониторить
такие sas'ы не знаю, обычные MegaRAID'ы вполне нормально ею видятся.
--
WBR et al.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Hardware] fujitsu siemens Primergy TX300 S4 raid monitoring
2008-12-11 13:54 [Hardware] fujitsu siemens Primergy TX300 S4 raid monitoring Vladimir V. Kamarzin
2008-12-11 15:01 ` Konstantin A. Lepikhov
@ 2008-12-13 14:39 ` Michael Shigorin
2008-12-15 7:53 ` Vladimir V. Kamarzin
1 sibling, 1 reply; 6+ messages in thread
From: Michael Shigorin @ 2008-12-13 14:39 UTC (permalink / raw)
To: hardware
On Thu, Dec 11, 2008 at 06:54:48PM +0500, Vladimir V. Kamarzin wrote:
> Собственно вопрос: чем мониторить состояние массива?
Посмотри mpt-status, поверх которого ещё был состряпан
mpt-status-monitoring (работает на LSI SAS1068).
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-12-16 15:13 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-12-11 13:54 [Hardware] fujitsu siemens Primergy TX300 S4 raid monitoring Vladimir V. Kamarzin
2008-12-11 15:01 ` Konstantin A. Lepikhov
2008-12-16 12:58 ` Vladimir V. Kamarzin
2008-12-16 15:13 ` Konstantin A. Lepikhov
2008-12-13 14:39 ` Michael Shigorin
2008-12-15 7:53 ` Vladimir V. Kamarzin
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git