* [Hardware] Выбор матплаты @ 2005-10-12 5:21 Vladimir Karpinsky 2005-10-12 9:59 ` [Hardware] " Anton Farygin 2005-10-12 15:21 ` [Hardware] " Igor V.Marenkov 0 siblings, 2 replies; 12+ messages in thread From: Vladimir Karpinsky @ 2005-10-12 5:21 UTC (permalink / raw) To: hardware Здравствуйте! Встал вопрос о покупке нового компьютера, планирую AMD64 на 939 сокете. Вопрос про матплату: что предпочтительнее для установки АЛМ2.4-АЛС3.0 из чипсетов: nForce4 или K8T800? Как-то раньше нвидиавские чипсеты считались быстрее, но закрытые драйвера и т.п. делали этот чипсет "менее дружественным" к Linux, чем VIA. Что-нибудь изменилось в этом мире? -- С уважением, Vladimir mailto:vkarpinsky@mail.ru ^ permalink raw reply [flat|nested] 12+ messages in thread
* [Hardware] Re: Выбор матплаты 2005-10-12 5:21 [Hardware] Выбор матплаты Vladimir Karpinsky @ 2005-10-12 9:59 ` Anton Farygin 2005-10-22 1:00 ` Alexey Tourbin 2005-10-12 15:21 ` [Hardware] " Igor V.Marenkov 1 sibling, 1 reply; 12+ messages in thread From: Anton Farygin @ 2005-10-12 9:59 UTC (permalink / raw) To: hardware On Wed, 12 Oct 2005 09:21:16 +0400, Vladimir Karpinsky wrote: > Здравствуйте! > > Встал вопрос о покупке нового > компьютера, планирую AMD64 на 939 сокете. > Вопрос про матплату: что > предпочтительнее для установки > АЛМ2.4-АЛС3.0 из чипсетов: nForce4 или K8T800? > Как-то раньше нвидиавские чипсеты > считались быстрее, но закрытые драйвера > и т.п. делали этот чипсет "менее > дружественным" к Linux, чем VIA. Что-нибудь > изменилось в этом мире? Не изменилось. VIA рулит как всегда, а с nForce вроде всё должно работать, но лучше быть поаккуратнее. Rgds, Rider ^ permalink raw reply [flat|nested] 12+ messages in thread
* [Hardware] Re: Выбор матплаты 2005-10-12 9:59 ` [Hardware] " Anton Farygin @ 2005-10-22 1:00 ` Alexey Tourbin 2005-10-22 8:43 ` Michael Shigorin 0 siblings, 1 reply; 12+ messages in thread From: Alexey Tourbin @ 2005-10-22 1:00 UTC (permalink / raw) To: hardware [-- Attachment #1: Type: text/plain, Size: 483 bytes --] On Wed, Oct 12, 2005 at 01:59:19PM +0400, Anton Farygin wrote: > Не изменилось. VIA рулит как всегда, а с > nForce вроде всё должно работать, но лучше быть поаккуратнее. Так что, VIA лучше чем nForce4, а nForce4 лучше чем ATI? Но для VIA нужна отдельная видюха, а в nForce4 вроде своя видюха неплохая, правильно я понимаю? Щас ещё читал что-то про nForce4 SLI, но там написано что он для геймеров и сильно греется, и стоит дороже. То есть вроде не надо мне этого SLI. [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Hardware] Re: Выбор матплаты 2005-10-22 1:00 ` Alexey Tourbin @ 2005-10-22 8:43 ` Michael Shigorin 2005-10-22 16:54 ` Maxim Tyurin 0 siblings, 1 reply; 12+ messages in thread From: Michael Shigorin @ 2005-10-22 8:43 UTC (permalink / raw) To: hardware On Sat, Oct 22, 2005 at 05:00:39AM +0400, Alexey Tourbin wrote: > > Не изменилось. VIA рулит как всегда, а с nForce вроде всё > > должно работать, но лучше быть поаккуратнее. > Так что, VIA лучше чем nForce4 Деревяннее, в смысле нюансов с ними меньше. Хотя та же NF2 с одинаковым мотором процентов на 10--20 шустрей KT600 на сборке была, помнится (дома была NF2, в офисе KT600; тест нечестный, поскольку дома и памяти больше, и диск пошустрее, но всё-таки оно было скорее CPU-bound). Вообще спроси железячника, у которого заказываешь, если ещё не заказал. Помнится, mithraen@ из московских контор хвалил Flash, которые предупреждали сразу, что про что думают, и давали возможность то ли потестить, то ли обменять. Мои здесь тоже так делают и это правильно. > а nForce4 лучше чем ATI? 100% > Но для VIA нужна отдельная видюха, а в nForce4 вроде своя > видюха неплохая, правильно я понимаю? Та, что в NF4 IGP, _жрёт память_. Как кусочек, так и полосу пропускания. Бишь проще добавить $5 или сколько там разницы между встроенной и дополнительной и при необходимости спокойно поменять эту самую дополнительную. Точно говорю, сам сперва купился на NF2 IGP. Можешь поискать, письмо в hardware@ где-то позапрошлым новым годом было. > То есть вроде не надо мне этого SLI. Угу. -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Hardware] Re: Выбор матплаты 2005-10-22 8:43 ` Michael Shigorin @ 2005-10-22 16:54 ` Maxim Tyurin 0 siblings, 0 replies; 12+ messages in thread From: Maxim Tyurin @ 2005-10-22 16:54 UTC (permalink / raw) To: hardware Michael Shigorin writes: > Деревяннее, в смысле нюансов с ними меньше. Хотя та же > NF2 с одинаковым мотором процентов на 10--20 шустрей KT600 > на сборке была, помнится (дома была NF2, в офисе KT600; > тест нечестный, поскольку дома и памяти больше, и диск > пошустрее, но всё-таки оно было скорее CPU-bound). Это было давно и уже не так. Контролер памяти у NF2 быстрее чем у VIA. Но теперь контролер в процессоре. -- With Best Regards, Maxim Tyurin aka Bungarus JID: MrKooll@jabber.pibhe.com ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Hardware] Выбор матплаты 2005-10-12 5:21 [Hardware] Выбор матплаты Vladimir Karpinsky 2005-10-12 9:59 ` [Hardware] " Anton Farygin @ 2005-10-12 15:21 ` Igor V.Marenkov 2005-10-13 5:38 ` Genix 1 sibling, 1 reply; 12+ messages in thread From: Igor V.Marenkov @ 2005-10-12 15:21 UTC (permalink / raw) To: hardware, Vladimir Karpinsky Vladimir Karpinsky пишет: >Здравствуйте! > >Встал вопрос о покупке нового компьютера, планирую AMD64 на 939 >сокете. Вопрос про матплату: что предпочтительнее для установки >АЛМ2.4-АЛС3.0 из чипсетов: nForce4 или K8T800? Как-то раньше >нвидиавские чипсеты считались быстрее, но закрытые драйвера и >т.п. делали этот чипсет "менее дружественным" к Linux, чем VIA. >Что-нибудь изменилось в этом мире? > > Производительность на 939-м сокете от чипсета не зависит(спасибо встроенному контроллеру памяти), но на инвидии разгон лучше и коммуникационные возможности лучше(если говорить про ультра версию: 4 SATA II vs 2 SATA I(причём плохо совместимая с SATA II винтами*), 10 USB vs 8, gigabit ethernet vs 0.1 gigabit ethernet и ещё парочка offtop специфичных функций). *Такие винты надо принудительно переключать в SATA I режим, но не у всех производителей это предусмотренно. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Hardware] Выбор матплаты 2005-10-12 15:21 ` [Hardware] " Igor V.Marenkov @ 2005-10-13 5:38 ` Genix 2005-10-13 6:59 ` Andrei Bulava 2005-10-13 13:35 ` Re[2]: " Vladimir Karpinsky 0 siblings, 2 replies; 12+ messages in thread From: Genix @ 2005-10-13 5:38 UTC (permalink / raw) To: hardware Igor V.Marenkov wrote: > gigabit ethernet vs 0.1 gigabit ethernet для гигабитного контроллера есть опенсорсный драйвер? -- У каждого в башке свои тараканы... ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Hardware] Выбор матплаты 2005-10-13 5:38 ` Genix @ 2005-10-13 6:59 ` Andrei Bulava 2005-10-13 7:23 ` Genix 2005-10-13 13:35 ` Re[2]: " Vladimir Karpinsky 1 sibling, 1 reply; 12+ messages in thread From: Andrei Bulava @ 2005-10-13 6:59 UTC (permalink / raw) To: hardware Genix wrote: > Igor V.Marenkov wrote: > >> gigabit ethernet vs 0.1 gigabit ethernet > > > для гигабитного контроллера есть опенсорсный драйвер? forcedeth? (понятно, что не идущий в составе ALM 2.4) <cite source="http://www.hailfinger.org/carldani/linux/patches/forcedeth/"> Currently I am adding gigabit ethernet support to forcedeth. UPDATE: NVidia has contributed gigabit support to forcedeth, so I'll work on integrating their patch and fixing remaining bugs in it. If you want to try it, download forcedeth_gigabit_try19.txt and apply it against the latest 2.6 kernel. </cite> -- // AB1002-UANIC ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Hardware] Выбор матплаты 2005-10-13 6:59 ` Andrei Bulava @ 2005-10-13 7:23 ` Genix 0 siblings, 0 replies; 12+ messages in thread From: Genix @ 2005-10-13 7:23 UTC (permalink / raw) To: hardware Andrei Bulava wrote: > forcedeth? (понятно, что не идущий в составе ALM 2.4) > > <cite source="http://www.hailfinger.org/carldani/linux/patches/forcedeth/"> > Currently I am adding gigabit ethernet support to forcedeth. > > UPDATE: > NVidia has contributed gigabit support to forcedeth, so I'll work > on integrating their patch and fixing remaining bugs in it. If you want > to try it, download forcedeth_gigabit_try19.txt and apply it against > the latest 2.6 kernel. > </cite> вполне может быть. знакомый жаловался что только 10Mb удалось заставить работать, правда это и давно было. -- У каждого в башке свои тараканы... ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re[2]: [Hardware] Выбор матплаты 2005-10-13 5:38 ` Genix 2005-10-13 6:59 ` Andrei Bulava @ 2005-10-13 13:35 ` Vladimir Karpinsky 2005-10-13 14:19 ` Andrei Bulava 1 sibling, 1 reply; 12+ messages in thread From: Vladimir Karpinsky @ 2005-10-13 13:35 UTC (permalink / raw) To: Genix Здравствуйте! Вы писали 13 октября 2005 г., 9:38:32: > Igor V.Marenkov wrote: >> gigabit ethernet vs 0.1 gigabit ethernet > для гигабитного контроллера есть опенсорсный драйвер? Да, вопрос хороший, у меня сразу появился аналогичный: Asus комплектует платы на VIA гигабитной сетевой картой от Марвел (Marvell 88E8001 Gigabit Ethernet Controller). Подскажите, пожалуйста, как с драйверами к нему -- С уважением, Vladimir mailto:vkarpinsky@mail.ru ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Hardware] Выбор матплаты 2005-10-13 13:35 ` Re[2]: " Vladimir Karpinsky @ 2005-10-13 14:19 ` Andrei Bulava 2005-10-13 18:49 ` Re[2]: " Vladimir Karpinsky 0 siblings, 1 reply; 12+ messages in thread From: Andrei Bulava @ 2005-10-13 14:19 UTC (permalink / raw) To: hardware Vladimir Karpinsky wrote: > Asus комплектует платы на VIA гигабитной сетевой картой от Марвел > (Marvell 88E8001 Gigabit Ethernet Controller). Подскажите, > пожалуйста, как с драйверами к нему sk98lin P.S. Вообще-то, ваш вопрос "гуглится" абсолютно без проблем. -- // AB1002-UANIC ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re[2]: [Hardware] Выбор матплаты 2005-10-13 14:19 ` Andrei Bulava @ 2005-10-13 18:49 ` Vladimir Karpinsky 0 siblings, 0 replies; 12+ messages in thread From: Vladimir Karpinsky @ 2005-10-13 18:49 UTC (permalink / raw) To: Andrei Bulava Здравствуйте, Andrei! Вы писали 13 октября 2005 г., 18:19:58: > Vladimir Karpinsky wrote: >> Asus комплектует платы на VIA гигабитной сетевой картой от Марвел >> (Marvell 88E8001 Gigabit Ethernet Controller). Подскажите, >> пожалуйста, как с драйверами к нему > sk98lin Спасибо! > P.S. Вообще-то, ваш вопрос "гуглится" абсолютно без проблем. Тред в hardware на эту тему датирован июлем, а меня и перспективы АЛС3.0 тоже интересуют, могли, ведь, и сломать... -- С уважением, Vladimir mailto:vkarpinsky@mail.ru ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2005-10-22 16:54 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2005-10-12 5:21 [Hardware] Выбор матплаты Vladimir Karpinsky 2005-10-12 9:59 ` [Hardware] " Anton Farygin 2005-10-22 1:00 ` Alexey Tourbin 2005-10-22 8:43 ` Michael Shigorin 2005-10-22 16:54 ` Maxim Tyurin 2005-10-12 15:21 ` [Hardware] " Igor V.Marenkov 2005-10-13 5:38 ` Genix 2005-10-13 6:59 ` Andrei Bulava 2005-10-13 7:23 ` Genix 2005-10-13 13:35 ` Re[2]: " Vladimir Karpinsky 2005-10-13 14:19 ` Andrei Bulava 2005-10-13 18:49 ` Re[2]: " Vladimir Karpinsky
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git