* [Hardware] Palm Tungsten T на Master 2.4
@ 2005-06-03 11:29 Maxim Bodyansky
2005-06-03 14:20 ` Maxim Tyurin
0 siblings, 1 reply; 7+ messages in thread
From: Maxim Bodyansky @ 2005-06-03 11:29 UTC (permalink / raw)
To: ALT Linux Hardware
Доброго времени суток!
Удалось ли кому-нибудь из присутствующих завести
синхронизацию с сабжем?
Если да, то с помощью каких телодвижений?
--
WBR, Maximbo
JID: maximbo@jabber.ru
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] Palm Tungsten T на Master 2.4
2005-06-03 11:29 [Hardware] Palm Tungsten T на Master 2.4 Maxim Bodyansky
@ 2005-06-03 14:20 ` Maxim Tyurin
2005-06-03 15:43 ` Maxim Bodyansky
0 siblings, 1 reply; 7+ messages in thread
From: Maxim Tyurin @ 2005-06-03 14:20 UTC (permalink / raw)
To: ALT Linux Hardware
Maxim Bodyansky writes:
> Доброго времени суток!
>
> Удалось ли кому-нибудь из присутствующих завести
> синхронизацию с сабжем?
>
> Если да, то с помощью каких телодвижений?
А он от тунгуса Е чем-то отличается в плане синхронизации?
Если нет - то заводится вообще без проблем.
Как именно - в соответствующем HOWTO разжевано.
Что конкретно делал и что не получается?
--
With Best Regards, Maxim Tyurin aka Bungarus
JID: MrKooll@jabber.pibhe.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] Palm Tungsten T на Master 2.4
2005-06-03 14:20 ` Maxim Tyurin
@ 2005-06-03 15:43 ` Maxim Bodyansky
2005-06-03 17:02 ` Maxim Tyurin
0 siblings, 1 reply; 7+ messages in thread
From: Maxim Bodyansky @ 2005-06-03 15:43 UTC (permalink / raw)
To: hardware
On Fri, Jun 03, 2005 at 05:20:35PM +0300 Maxim Tyurin wrote:
> Maxim Bodyansky writes:
>
> > Доброго времени суток!
> >
> > Удалось ли кому-нибудь из присутствующих завести
> > синхронизацию с сабжем?
> >
> > Если да, то с помощью каких телодвижений?
>
> А он от тунгуса Е чем-то отличается в плане синхронизации?
> Если нет - то заводится вообще без проблем.
> Как именно - в соответствующем HOWTO разжевано.
>
> Что конкретно делал и что не получается?
1. Вставил в кредл.
2. На кредле нажал кнопку HotSync.
3. Уст-во появилось.
4. pilot-xfer -i $filename сказал:
Listening to port: /dev/usb/ttyUSB1
Please press the HotSync button now...
5. В логах на 12ой консоли:
--- begin logs ---
kernel: hub.c: new USB device 00:07.2-1, assigned
addres
s 3
kernel: usbserial.c: Handspring Visor / Treo /
Palm 4.0
/ CliИ 4.x converter detected
kernel: usbserial.c: Handspring Visor / Treo /
Palm 4.0
/ CliИ 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
kernel: usbserial.c: Handspring Visor / Treo /
Palm 4.0
/ CliИ 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs)
--- end logs ---
И всё. Синхронизация не идёт.
--
WBR, Maximbo
JID: maximbo@jabber.ru
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] Palm Tungsten T на Master 2.4
2005-06-03 15:43 ` Maxim Bodyansky
@ 2005-06-03 17:02 ` Maxim Tyurin
2005-06-03 17:36 ` Maxim Bodyansky
0 siblings, 1 reply; 7+ messages in thread
From: Maxim Tyurin @ 2005-06-03 17:02 UTC (permalink / raw)
To: hardware
Maxim Bodyansky writes:
>> Что конкретно делал и что не получается?
>
> 1. Вставил в кредл.
> 2. На кредле нажал кнопку HotSync.
> 3. Уст-во появилось.
> 4. pilot-xfer -i $filename сказал:
> Listening to port: /dev/usb/ttyUSB1
> Please press the HotSync button now...
А наоборот?
сначала запустить
pilot-xfer -p /dev/ttyUSB1
и потом нажать HotSync
--
With Best Regards, Maxim Tyurin aka Bungarus
JID: MrKooll@jabber.pibhe.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] Palm Tungsten T на Master 2.4
2005-06-03 17:02 ` Maxim Tyurin
@ 2005-06-03 17:36 ` Maxim Bodyansky
2005-06-03 17:58 ` Maxim Tyurin
0 siblings, 1 reply; 7+ messages in thread
From: Maxim Bodyansky @ 2005-06-03 17:36 UTC (permalink / raw)
To: hardware
On Птн, Июн 03, 2005 at 08:02:33 +0300 Maxim Tyurin wrote:
> Maxim Bodyansky writes:
>
> >> Что конкретно делал и что не получается?
> >
> > 1. Вставил в кредл.
> > 2. На кредле нажал кнопку HotSync.
> > 3. Уст-во появилось.
> > 4. pilot-xfer -i $filename сказал:
> > Listening to port: /dev/usb/ttyUSB1
> > Please press the HotSync button now...
>
> А наоборот?
> сначала запустить
> pilot-xfer -p /dev/ttyUSB1
> и потом нажать HotSync
А наоборот он сначала пишет:
Port not connected, sleeping for 2 seconds, 4 retries..
Потом, после нажатия HotSync:
Listening to port: /dev/usb/ttyUSB1
Please press the HotSync button now...
И снова здарова.
--
WBR, Maximbo
JID: maximbo@jabber.ru
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] Palm Tungsten T на Master 2.4
2005-06-03 17:36 ` Maxim Bodyansky
@ 2005-06-03 17:58 ` Maxim Tyurin
2005-06-03 18:09 ` Maxim Bodyansky
0 siblings, 1 reply; 7+ messages in thread
From: Maxim Tyurin @ 2005-06-03 17:58 UTC (permalink / raw)
To: hardware
Maxim Bodyansky writes:
> А наоборот он сначала пишет:
> Port not connected, sleeping for 2 seconds, 4 retries..
>
> Потом, после нажатия HotSync:
> Listening to port: /dev/usb/ttyUSB1
> Please press the HotSync button now...
>
> И снова здарова.
А поддержка пальм включена в конфиге?
/etc/sysconfig/usb
--
With Best Regards, Maxim Tyurin aka Bungarus
JID: MrKooll@jabber.pibhe.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] Palm Tungsten T на Master 2.4
2005-06-03 17:58 ` Maxim Tyurin
@ 2005-06-03 18:09 ` Maxim Bodyansky
0 siblings, 0 replies; 7+ messages in thread
From: Maxim Bodyansky @ 2005-06-03 18:09 UTC (permalink / raw)
To: hardware
On Птн, Июн 03, 2005 at 08:58:59 +0300 Maxim Tyurin wrote:
> Maxim Bodyansky writes:
>
> > А наоборот он сначала пишет:
> > Port not connected, sleeping for 2 seconds, 4 retries..
> >
> > Потом, после нажатия HotSync:
> > Listening to port: /dev/usb/ttyUSB1
> > Please press the HotSync button now...
> >
> > И снова здарова.
>
> А поддержка пальм включена в конфиге?
> /etc/sysconfig/usb
Только что ещё раз прошёлся по ссылкам из google.
Вот что нашёл:
http://www.ussg.iu.edu/hypermail/linux/kernel/0302.2/1809.html
Короче, надо было использовать /dev/ttyUSB0
Нда, согласен с автором: "I'm an idiot!". Всё равно спасибо
за помощь.
PS: клёвая штука -- Palm! ^_^
--
WBR, Maximbo
JID: maximbo@jabber.ru
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2005-06-03 18:09 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-06-03 11:29 [Hardware] Palm Tungsten T на Master 2.4 Maxim Bodyansky
2005-06-03 14:20 ` Maxim Tyurin
2005-06-03 15:43 ` Maxim Bodyansky
2005-06-03 17:02 ` Maxim Tyurin
2005-06-03 17:36 ` Maxim Bodyansky
2005-06-03 17:58 ` Maxim Tyurin
2005-06-03 18:09 ` Maxim Bodyansky
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git