From: "Alexey R. Prokopov" <across4mail@gmail.com>
To: hardware@lists.altlinux.org
Subject: [Hardware] Проблема с сетевой картой ?!
Date: Sat, 28 Aug 2010 20:39:27 +0900
Message-ID: <i5ashn$c38$1@dough.gmane.org> (raw)
На днях появилась такая проблема (при прокачивании больших объемов инфы
по самбе)
PS
Коннект естественно пропадает, перезапуск сети не помогает. Только ребут.
Вот лог.
2 сетевушки на сеть Intel модули e1000 и одна в инет Dlink модуль sky2
Aug 27 21:13:14 cepbep kernel: [756506.174368] sky2 0000:01:00.0: error
interrupt status=0xc0000000
Aug 27 21:13:14 cepbep kernel: [756506.174373] sky2 0000:01:00.0: PCI
hardware error (0x2010)
Aug 27 21:13:21 cepbep kernel: [756512.964014] ------------[ cut here
]------------
Aug 27 21:13:21 cepbep kernel: [756512.964022] WARNING: at
net/sched/sch_generic.c:261 dev_watchdog+0x237/0x250()
Aug 27 21:13:21 cepbep kernel: [756512.964024] Hardware name: S3210SH
Aug 27 21:13:21 cepbep kernel: [756512.964026] NETDEV WATCHDOG: eth0
(sky2): transmit queue 0 timed out
Aug 27 21:13:21 cepbep kernel: [756512.964028] Modules linked in:
ppp_deflate zlib_deflate bsd_comp af_packet ppp_async crc_ccitt
ppp_generic slhc tun ipt_REDIRECT bridge stp ipt_LOG xt_state
xt_multiport xt_limit ipt_MASQUERADE iptable_nat nf_nat
nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 xt_TCPMSS xt_tcpudp
iptable_mangle iptable_filter ip_tables x_tables reiserfs dm_mod lnbp21
tda826x tda10086 budget budget_core saa7146 ttpci_eeprom i2c_i801
dvb_core i3200_edac edac_core i2c_core ehci_hcd rtc_cmos sg uhci_hcd
rtc_core sr_mod usbcore e1000 e1000e pcspkr floppy psmouse nls_base
cdrom serio_raw rtc_lib sky2 evdev processor button thermal ext3 jbd
mbcache ahci libata sd_mod crc_t10dif scsi_mod
Aug 27 21:13:21 cepbep kernel: [756512.964079] Pid: 0, comm: swapper Not
tainted 2.6.32-std-pae-alt16 #1
Aug 27 21:13:21 cepbep kernel: [756512.964081] Call Trace:
Aug 27 21:13:21 cepbep kernel: [756512.964084] [<c129ee27>] ?
dev_watchdog+0x237/0x250
Aug 27 21:13:21 cepbep kernel: [756512.964087] [<c129ee27>] ?
dev_watchdog+0x237/0x250
Aug 27 21:13:21 cepbep kernel: [756512.964091] [<c1044d0c>]
warn_slowpath_common+0x6c/0xc0
Aug 27 21:13:21 cepbep kernel: [756512.964093] [<c129ee27>] ?
dev_watchdog+0x237/0x250
Aug 27 21:13:21 cepbep kernel: [756512.964096] [<c1044da6>]
warn_slowpath_fmt+0x26/0x30
Aug 27 21:13:21 cepbep kernel: [756512.964098] [<c129ee27>]
dev_watchdog+0x237/0x250
Aug 27 21:13:21 cepbep kernel: [756512.964102] [<c105c28f>] ?
insert_work+0x7f/0x90
Aug 27 21:13:21 cepbep kernel: [756512.964105] [<c105c801>] ?
__queue_work+0x31/0x40
Aug 27 21:13:21 cepbep kernel: [756512.964107] [<c1054093>]
run_timer_softirq+0x133/0x280
Aug 27 21:13:21 cepbep kernel: [756512.964111] [<c106e903>] ?
tick_dev_program_event+0x33/0xc0
Aug 27 21:13:21 cepbep kernel: [756512.964113] [<c129ebf0>] ?
dev_watchdog+0x0/0x250
Aug 27 21:13:21 cepbep kernel: [756512.964116] [<c104b712>]
__do_softirq+0xc2/0x190
Aug 27 21:13:21 cepbep kernel: [756512.964118] [<c1069cf9>] ?
ktime_get+0x69/0x100
Aug 27 21:13:21 cepbep kernel: [756512.964121] [<c104b81d>]
do_softirq+0x3d/0x40
Aug 27 21:13:21 cepbep kernel: [756512.964123] [<c104b975>]
irq_exit+0x65/0x90
Aug 27 21:13:21 cepbep kernel: [756512.964126] [<c10190f7>]
smp_apic_timer_interrupt+0x57/0x90
Aug 27 21:13:21 cepbep kernel: [756512.964129] [<c1003a9a>]
apic_timer_interrupt+0x2a/0x30
Aug 27 21:13:21 cepbep kernel: [756512.964132] [<c100a4de>] ?
mwait_idle+0x6e/0xa0
Aug 27 21:13:21 cepbep kernel: [756512.964134] [<c1002062>]
cpu_idle+0x52/0x90
Aug 27 21:13:21 cepbep kernel: [756512.964137] [<c1319fd4>]
start_secondary+0x168/0x1d4
Aug 27 21:13:21 cepbep kernel: [756512.964139] ---[ end trace
e87be64e7a76ba6a ]---
Aug 27 21:13:21 cepbep kernel: [756512.964141] sky2 eth0: tx timeout
Aug 27 21:13:21 cepbep kernel: [756512.964256] sky2 eth0: disabling
interface
Aug 27 21:13:21 cepbep kernel: [756512.966283] sky2 eth0: enabling interface
Aug 27 21:13:21 cepbep kernel: [756512.984332] lan: port 1(eth0)
entering disabled state
Aug 27 21:13:24 cepbep kernel: [756516.063802] sky2 eth0: Link is up at
1000 Mbps, full duplex, flow control both
Aug 27 21:13:24 cepbep kernel: [756516.063944] lan: port 1(eth0)
entering listening state
Aug 27 21:13:34 cepbep kernel: [756525.964012] sky2 eth0: tx timeout
Aug 27 21:13:34 cepbep kernel: [756525.964025] sky2 eth0: disabling
interface
Aug 27 21:13:34 cepbep kernel: [756525.966108] sky2 eth0: enabling interface
Aug 27 21:13:34 cepbep kernel: [756525.997634] lan: port 1(eth0)
entering disabled state
Aug 27 21:13:37 cepbep kernel: [756529.087995] sky2 eth0: Link is up at
1000 Mbps, full duplex, flow control both
Aug 27 21:13:37 cepbep kernel: [756529.088133] lan: port 1(eth0)
entering listening state
next reply other threads:[~2010-08-28 11:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-28 11:39 Alexey R. Prokopov [this message]
2010-08-28 11:56 ` Andriy Dobrovol`s`kii
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='i5ashn$c38$1@dough.gmane.org' \
--to=across4mail@gmail.com \
--cc=hardware@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git