From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Injected-Via-Gmane: http://gmane.org/ To: hardware@lists.altlinux.org From: Andrei Lomov Date: Thu, 29 Nov 2007 14:28:02 +0600 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 8Bit X-Complaints-To: usenet@ger.gmane.org X-Gmane-NNTP-Posting-Host: nat6.academ.org User-Agent: KNode/0.10.4 Sender: news Subject: [Hardware] hdparm -t ... 2.09 MB/sec !? X-BeenThere: hardware@lists.altlinux.org X-Mailman-Version: 2.1.9 Precedence: list Reply-To: hardware@lists.altlinux.org List-Id: ALT Linux hardware support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 29 Nov 2007 08:33:53 -0000 Archived-At: List-Archive: List-Post: Что-то моему уму непостижимое :( Заменили m/b на машине (вроде как апгрейд), и скорость винта упала в сорок раз. m/b AK75-EC : Винт Seagate 250 Gb стоит на первом контроллере мастером, слэйва нет. Биос видит его нормально. # /sbin/hdparm -t /dev/hda /dev/hda: Timing buffered disk reads: 8 MB in 3.84 seconds = 2.09 MB/sec # /sbin/hdparm -i /dev/hda /dev/hda: Model=ST3250823A, FwRev=3.03, SerialNo=5ND0RV7P Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16 CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: device does not report version: /var/log/dmesg: Linux version 2.6.12-std26-up-alt6 (builder@salto.malta.altlinux.ru) (gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Thu Oct 27 10:34:10 MSD 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable) BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS) BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 383MB LOWMEM available. On node 0 totalpages: 98288 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 94192 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f6dc0 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff3040 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Allocating PCI resources starting at 18000000 (gap: 18000000:e7ff0000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=ALT_Linux_3.0 ro root=306 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01302000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1713.484 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 386016k/393152k available (1496k kernel code, 6584k reserved, 738k data, 184k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3391.48 BogoMIPS (lpj=1695744) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000 CPU: CLK_CTL MSR was 6003d223. Reprogramming to 2003d223 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon XP (Tbre stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: Looking for DSDT in initrd... not found! ACPI: setting ELCR to 0200 (from 0e88) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 399k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report audit: initializing netlink socket (disabled) audit(1196348864.558:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing vesafb: framebuffer at 0xd8000000, mapped to 0xd8880000, using 4096k, total 4096k vesafb: mode is 1280x1024x16, linelength=2560, pages=0 vesafb: protected mode interface info at c000:0336 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3). Console: switching to colour frame buffer device 160x61 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 controller doesn't have KBD irq; using default 0x1 PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 ACPI wakeup devices: SLPB PCI0 USB0 USB1 MODM UAR1 ECP1 ACPI: (supports S0 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (romfs filesystem) readonly. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: ST3250823A, ATA DISK drive Probing IDE interface ide1... hdc: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive hdd: CD-W540E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 > kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 184k freed Executing init=/sbin/init Real Time Clock Driver v1.12 EXT3 FS on hda6, internal journal device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1 NTFS driver 2.1.22 [Flags: R/W MODULE]. NTFS-fs warning (device hda1): parse_options(): Option iocharset is deprecated. Please use option nls= in the future. NTFS volume version 3.1. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. loop: loaded (max 64 devices) EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root spurious 8259A interrupt: IRQ7. -- Всего доброго, А.Л.