* [Hardware] струйный принтер. что брать?
@ 2007-10-16 6:37 Artem Zolochevskiy
2007-10-16 6:46 ` Genix
` (3 more replies)
0 siblings, 4 replies; 16+ messages in thread
From: Artem Zolochevskiy @ 2007-10-16 6:37 UTC (permalink / raw)
To: hardware
hi all
100 лет не общался со струйными принтерами. Что брать?
Потребности такие
- сканирование (т.е это должен быть агрегат 3 в одном)
- печать фоток (желательно и без PC, т.е. наличие кардридера)
- возможность подсоединить его к Системе Непрерывной Подачи Чернил (СНПЧ)
- само-собой использование в нашей ОС.
Что нагуглилось:
Как я понял в "струйном мире" + Linux смотреть можно на canon и epson
Как обстоят дела с canon я не знаю, а вот среди epson смотрел выбор между
CX и RX серией. СХ подкупает пигментными чернилами. Но я понятия не имею
насколько это хорошо/плохо. Судя по описанию -- хорошо.
Есть, вроде как, и поддержка этих серий:
http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do
Хотя я не понимаю, какая на данной странице разница между
* Image Scan! for Linux & Photo Image Print System
и
* Image Scan! for Linux & Photo Image Print System Lite
Да и вот это как-то непонятно:
--
2007/10/04
Stopped download service.
NEWS
Thank you for using the AVASYS download service for Linux drivers.
We stop download service for maintenance.
--
Итак, кто может что-то посоветовать? Что смотреть?
- epson CX...
- epxon RX...
- или вообще повернуться в сторону canon
Что реально работает из мультифункционалок?
--
Artem Zolochevskiy
Kaliningrad, Russia
JID: az@jabber.org
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 6:37 [Hardware] струйный принтер. что брать? Artem Zolochevskiy
@ 2007-10-16 6:46 ` Genix
2007-10-16 7:29 ` Artem Zolochevskiy
2007-10-16 6:55 ` ALT Linux User
` (2 subsequent siblings)
3 siblings, 1 reply; 16+ messages in thread
From: Genix @ 2007-10-16 6:46 UTC (permalink / raw)
To: hardware
Artem Zolochevskiy пишет:
> Итак, кто может что-то посоветовать? Что смотреть?
> - epson CX...
> - epxon RX...
R270, например, очень неудачный корпус для установки СНПЧ.
Если планируете его (СНПЧ) в дальнейшем использовать, смотрите сразу,
сколько вам придется делать разрезов, и готовы ли вы пойти на это (есть
и более удачные модели, где пилить не приходится ничего)
--
У каждого в башке свои тараканы...
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 6:46 ` Genix
@ 2007-10-16 7:29 ` Artem Zolochevskiy
0 siblings, 0 replies; 16+ messages in thread
From: Artem Zolochevskiy @ 2007-10-16 7:29 UTC (permalink / raw)
To: hardware
Genix wrote:
> Artem Zolochevskiy пишет:
>
>> Итак, кто может что-то посоветовать? Что смотреть?
>> - epson CX...
>> - epxon RX...
>
> R270, например, очень неудачный корпус для установки СНПЧ.
> Если планируете его (СНПЧ) в дальнейшем использовать, смотрите сразу,
> сколько вам придется делать разрезов, и готовы ли вы пойти на это (есть
> и более удачные модели, где пилить не приходится ничего)
>
>
Ну в случае 3in1 пилить я думаю всё равно придётся.
--
Artem Zolochevskiy
Kaliningrad, Russia
JID: az@jabber.org
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 6:37 [Hardware] струйный принтер. что брать? Artem Zolochevskiy
2007-10-16 6:46 ` Genix
@ 2007-10-16 6:55 ` ALT Linux User
2007-10-16 7:34 ` Artem Zolochevskiy
2007-10-16 12:23 ` Michael Shigorin
2007-10-16 12:22 ` Michael Shigorin
2007-10-19 8:43 ` Artem Zolochevskiy
3 siblings, 2 replies; 16+ messages in thread
From: ALT Linux User @ 2007-10-16 6:55 UTC (permalink / raw)
To: hardware
Artem Zolochevskiy пишет:
> Потребности такие
> - сканирование (т.е это должен быть агрегат 3 в одном)
А это обязательно? Может всё же 3 разных агрегата взять, но хорошо
поддерживаемых?
> - печать фоток (желательно и без PC, т.е. наличие кардридера)
Может HP? Или цветопередеча и остальные параметры фото критичны? Хотя,
если такие вещи СУПЕР критичны - от оффтопика Вам никуда не дется...
> - возможность подсоединить его к Системе Непрерывной Подачи Чернил (СНПЧ)
Насколько это критично? Размышляли, считали? Что за задача?
Может быть разумнее просто взять специальный комплект перезаправляемых
кэртриджей от RDM и банки с краской?
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 6:55 ` ALT Linux User
@ 2007-10-16 7:34 ` Artem Zolochevskiy
2007-10-16 8:37 ` ALT Linux User
2007-10-16 12:23 ` Michael Shigorin
1 sibling, 1 reply; 16+ messages in thread
From: Artem Zolochevskiy @ 2007-10-16 7:34 UTC (permalink / raw)
To: hardware
ALT Linux User wrote:
> Artem Zolochevskiy пишет:
>
>> Потребности такие
>> - сканирование (т.е это должен быть агрегат 3 в одном)
>
> А это обязательно? Может всё же 3 разных агрегата взять, но хорошо
> поддерживаемых?
>
Хотелось бы экономии места. Да и разве это противоречашие веши?
>> - печать фоток (желательно и без PC, т.е. наличие кардридера)
>
> Может HP? Или цветопередеча и остальные параметры фото критичны? Хотя,
> если такие вещи СУПЕР критичны - от оффтопика Вам никуда не дется...
Может и HP. Можете конкретную модель посоветовать?
>> - возможность подсоединить его к Системе Непрерывной Подачи Чернил (СНПЧ)
>
> Насколько это критично? Размышляли, считали? Что за задача?
> Может быть разумнее просто взять специальный комплект перезаправляемых
> кэртриджей от RDM и банки с краской?
А вот тут я не очень спец. Перезаправляемые картриджи могут оказаться
дешевле СНПЧ ?
--
Artem Zolochevskiy
Kaliningrad, Russia
JID: az@jabber.org
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 7:34 ` Artem Zolochevskiy
@ 2007-10-16 8:37 ` ALT Linux User
2007-10-16 9:04 ` Artem Zolochevskiy
0 siblings, 1 reply; 16+ messages in thread
From: ALT Linux User @ 2007-10-16 8:37 UTC (permalink / raw)
To: hardware
On 10/16/07, Artem Zolochevskiy <artem.zolochevskiy@gmail.com> wrote:
> Хотелось бы экономии места.
Если это не секрет, то хотелось бы озвучивания задачи, под которую всё
это предполагается. Вслепую тяжело рекомендовать что-либо.
> А вот тут я не очень спец. Перезаправляемые картриджи могут оказаться
> дешевле СНПЧ ?
Опять же - не совсем понятно... Вы хотите 3в1 и плюс ещё "водрузить"
СНПЧ на всё это...
СНПЧ, грубо говоря - это такие большие банки с краской, стоящие над
принтером и соединённые трубочками с кертриджами/печатной головкой.
Где здесь "экономия места", не говоря уже об элементарном удобстве
всей этой конструкции?
СНПЧ IMHO хорошо при действительно потоковом выводе с принтера - когда
распечатка идёт практически беспрерывно.Во всех остальных случаях его
ценность лично для меня - спорна.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 8:37 ` ALT Linux User
@ 2007-10-16 9:04 ` Artem Zolochevskiy
2007-10-16 9:16 ` ALT Linux User
2007-10-31 6:56 ` Pavel N. Solovyov
0 siblings, 2 replies; 16+ messages in thread
From: Artem Zolochevskiy @ 2007-10-16 9:04 UTC (permalink / raw)
To: hardware
ALT Linux User wrote:
> On 10/16/07, Artem Zolochevskiy <artem.zolochevskiy@gmail.com> wrote:
>
>> Хотелось бы экономии места.
>
> Если это не секрет, то хотелось бы озвучивания задачи, под которую всё
> это предполагается. Вслепую тяжело рекомендовать что-либо.
Да я, вроде, всё озвучил. Ничего не утаивал.
>> А вот тут я не очень спец. Перезаправляемые картриджи могут оказаться
>> дешевле СНПЧ ?
>
> Опять же - не совсем понятно... Вы хотите 3в1 и плюс ещё "водрузить"
> СНПЧ на всё это...
Да, именно так.
> СНПЧ, грубо говоря - это такие большие банки с краской, стоящие над
> принтером и соединённые трубочками с кертриджами/печатной головкой.
> Где здесь "экономия места", не говоря уже об элементарном удобстве
> всей этой конструкции?
Не _над_ а _рядом_. И занимают не так уж и много, как мне показалось, места.
В любом случае баночки займут меньшую площадь чем сканер. :-)
Не пойму, неужели принтер + сканер в одном корпусе чем-то отличаются от
таковых раздельных...
А то, что как раз сканер-ная часть поддерживаются, тут у меня больше
уверенности (судя по гуглению). Вопрос скорее в принтере.
> СНПЧ IMHO хорошо при действительно потоковом выводе с принтера - когда
> распечатка идёт практически беспрерывно.Во всех остальных случаях его
> ценность лично для меня - спорна.
Ну мне показалось, что можно прилично экономить.
И всё же. Если вы действительно сталкивались с работающими вариантами
струйников 3в1, то очень хотелось бы услышать название модели и
впечатления.
Сведём вопрос к минимуму :-)
Назовите стрйник 3in1, работающий под Linux. Причем как его сканерная часть
там и принтерная.
--
Artem Zolochevskiy
Kaliningrad, Russia
JID: az@jabber.org
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 9:04 ` Artem Zolochevskiy
@ 2007-10-16 9:16 ` ALT Linux User
2007-10-31 6:56 ` Pavel N. Solovyov
1 sibling, 0 replies; 16+ messages in thread
From: ALT Linux User @ 2007-10-16 9:16 UTC (permalink / raw)
To: hardware
On 10/16/07, Artem Zolochevskiy <artem.zolochevskiy@gmail.com> wrote:
> Сведём вопрос к минимуму :-)
> Назовите стрйник 3in1, работающий под Linux. Причем как его сканерная часть
> там и принтерная.
Не могу назвать, так как не работаю постоянно со сканером и
фотопринтером в линукс. Возможно linuxprinting.org может. Там есть
специальные таблицы, где по производителям легко посмотреть насколько
хорошо поддерживается та или иная модель.
К сожалению, свои опыты по сканированию/фотопечати в линукс не могу
назвать положительными.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 9:04 ` Artem Zolochevskiy
2007-10-16 9:16 ` ALT Linux User
@ 2007-10-31 6:56 ` Pavel N. Solovyov
1 sibling, 0 replies; 16+ messages in thread
From: Pavel N. Solovyov @ 2007-10-31 6:56 UTC (permalink / raw)
To: hardware
On Tue, 16 Oct 2007 12:04:07 +0300
Artem Zolochevskiy wrote:
> А то, что как раз сканер-ная часть поддерживаются, тут у меня больше
> уверенности (судя по гуглению). Вопрос скорее в принтере.
А вот тут может быть закавыка. Пример несколько из другой
оперы, про HP3380 (лазерный комбайн). Есть у него такая пакость, как
лампа сканера, которая практически не отключается и имеет ограниченный
ресурс. Так вот, когда лампа сканера начинает умирать, то перестаёт
работать и принтер, не имеющий с этой лампой вроде бы ничего общего;-(
Выбор комбайна от НР не очень хорошее решение (справедливо, в
первую очередь для испытанного в количестве 3-х штук HP3380). Лечение
сводится в первый раз к чистке лампы и оптики от пыли, а в дальнейшем
надо покупать весь оптический узел сканера, т.к. отдельно лампы мы не
нашли.
--
Успехов. Павел.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 6:55 ` ALT Linux User
2007-10-16 7:34 ` Artem Zolochevskiy
@ 2007-10-16 12:23 ` Michael Shigorin
2007-10-16 19:09 ` ALT Linux User
1 sibling, 1 reply; 16+ messages in thread
From: Michael Shigorin @ 2007-10-16 12:23 UTC (permalink / raw)
To: hardware
On Tue, Oct 16, 2007 at 10:55:25AM +0400, ALT Linux User wrote:
> Может HP? Или цветопередеча и остальные параметры фото
> критичны? Хотя, если такие вещи СУПЕР критичны - от оффтопика
> Вам никуда не дется...
Не скажите.
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
---- Oct 26--27, Kiev, Ukraine:
-- http://conference.osdn.org.ua
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 12:23 ` Michael Shigorin
@ 2007-10-16 19:09 ` ALT Linux User
2007-10-18 20:55 ` Michael Shigorin
0 siblings, 1 reply; 16+ messages in thread
From: ALT Linux User @ 2007-10-16 19:09 UTC (permalink / raw)
To: hardware, shigorin
On 10/16/07, Michael Shigorin <mike@osdn.org.ua> wrote:
> On Tue, Oct 16, 2007 at 10:55:25AM +0400, ALT Linux User wrote:
> > Может HP? Или цветопередеча и остальные параметры фото
> > критичны? Хотя, если такие вещи СУПЕР критичны - от оффтопика
> > Вам никуда не дется...
>
> Не скажите.
Ну... Maк можете взять...
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 19:09 ` ALT Linux User
@ 2007-10-18 20:55 ` Michael Shigorin
2007-10-19 4:27 ` ALT Linux User
0 siblings, 1 reply; 16+ messages in thread
From: Michael Shigorin @ 2007-10-18 20:55 UTC (permalink / raw)
To: hardware
On Tue, Oct 16, 2007 at 11:09:09PM +0400, ALT Linux User wrote:
> > > Может HP? Или цветопередеча и остальные параметры фото
> > > критичны? Хотя, если такие вещи СУПЕР критичны - от
> > > оффтопика Вам никуда не дется...
> > Не скажите.
> Ну... Maк можете взять...
Да я и линукс могу взять. Возни больше, но профили уже есть куда
засовывать -- не то что десять лет тому.
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
---- Oct 26--27, Kiev, Ukraine:
-- http://conference.osdn.org.ua
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-18 20:55 ` Michael Shigorin
@ 2007-10-19 4:27 ` ALT Linux User
2007-10-19 8:00 ` Michael Shigorin
0 siblings, 1 reply; 16+ messages in thread
From: ALT Linux User @ 2007-10-19 4:27 UTC (permalink / raw)
To: hardware, shigorin
On 10/19/07, Michael Shigorin <mike@osdn.org.ua> wrote:
> On Tue, Oct 16, 2007 at 11:09:09PM +0400, ALT Linux User wrote:
> > > > Может HP? Или цветопередеча и остальные параметры фото
> > > > критичны? Хотя, если такие вещи СУПЕР критичны - от
> > > > оффтопика Вам никуда не дется...
> > > Не скажите.
> > Ну... Maк можете взять...
>
> Да я и линукс могу взять. Возни больше, но профили уже есть куда
> засовывать -- не то что десять лет тому.
А можно поинтересоваться куда? В Scribus? Или есть какой-то CVS гимпа,
который умеет с профилями на печать выводить?
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-19 4:27 ` ALT Linux User
@ 2007-10-19 8:00 ` Michael Shigorin
0 siblings, 0 replies; 16+ messages in thread
From: Michael Shigorin @ 2007-10-19 8:00 UTC (permalink / raw)
To: hardware
On Fri, Oct 19, 2007 at 08:27:03AM +0400, ALT Linux User wrote:
> > > > > Может HP? Или цветопередеча и остальные параметры фото
> > > > > критичны? Хотя, если такие вещи СУПЕР критичны - от
> > > > > оффтопика Вам никуда не дется...
> > > > Не скажите.
> > > Ну... Maк можете взять...
> > Да я и линукс могу взять. Возни больше, но профили уже есть
> > куда засовывать -- не то что десять лет тому.
> А можно поинтересоваться куда? В Scribus? Или есть какой-то CVS
> гимпа, который умеет с профилями на печать выводить?
http://photo.net/bboard/q-and-a-fetch-msg?msg_id=00JvHj
http://en.wikipedia.org/wiki/Linux_color_management
Disclaimer: поинтересовываюсь, но не применял.
Знаю, что профили уже небесполезны.
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
---- Oct 26--27, Kiev, Ukraine:
-- http://conference.osdn.org.ua
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 6:37 [Hardware] струйный принтер. что брать? Artem Zolochevskiy
2007-10-16 6:46 ` Genix
2007-10-16 6:55 ` ALT Linux User
@ 2007-10-16 12:22 ` Michael Shigorin
2007-10-19 8:43 ` Artem Zolochevskiy
3 siblings, 0 replies; 16+ messages in thread
From: Michael Shigorin @ 2007-10-16 12:22 UTC (permalink / raw)
To: hardware
On Tue, Oct 16, 2007 at 09:37:21AM +0300, Artem Zolochevskiy wrote:
> 100 лет не общался со струйными принтерами. Что брать?
IMHO Epson/HP.
> - возможность подсоединить его к Системе Непрерывной Подачи Чернил (СНПЧ)
Эпсоны с такими и используем -- принтеры, не МФУ. Какие-то из их
МФУ полностью работали ещё года три-четыре тому, но модель не
помню, да она и не выпускается уже.
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
---- Oct 26--27, Kiev, Ukraine:
-- http://conference.osdn.org.ua
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Hardware] струйный принтер. что брать?
2007-10-16 6:37 [Hardware] струйный принтер. что брать? Artem Zolochevskiy
` (2 preceding siblings ...)
2007-10-16 12:22 ` Michael Shigorin
@ 2007-10-19 8:43 ` Artem Zolochevskiy
3 siblings, 0 replies; 16+ messages in thread
From: Artem Zolochevskiy @ 2007-10-19 8:43 UTC (permalink / raw)
To: hardware
Artem Zolochevskiy wrote:
> hi all
>
> 100 лет не общался со струйными принтерами. Что брать?
>
> Потребности такие
> - сканирование (т.е это должен быть агрегат 3 в одном)
> - печать фоток (желательно и без PC, т.е. наличие кардридера)
> - возможность подсоединить его к Системе Непрерывной Подачи Чернил (СНПЧ)
> - само-собой использование в нашей ОС.
>
>
> Что нагуглилось:
> Как я понял в "струйном мире" + Linux смотреть можно на canon и epson
> Как обстоят дела с canon я не знаю, а вот среди epson смотрел выбор между
> CX и RX серией. СХ подкупает пигментными чернилами. Но я понятия не имею
> насколько это хорошо/плохо. Судя по описанию -- хорошо.
> Есть, вроде как, и поддержка этих серий:
> http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do
> Хотя я не понимаю, какая на данной странице разница между
> * Image Scan! for Linux & Photo Image Print System
> и
> * Image Scan! for Linux & Photo Image Print System Lite
> Да и вот это как-то непонятно:
> --
> 2007/10/04
> Stopped download service.
> NEWS
>
> Thank you for using the AVASYS download service for Linux drivers.
>
> We stop download service for maintenance.
> --
>
> Итак, кто может что-то посоветовать? Что смотреть?
> - epson CX...
> - epxon RX...
> - или вообще повернуться в сторону canon
>
> Что реально работает из мультифункционалок?
>
Для архива
EPSON STYLUS PHOTO RX700
http://www.epson.ru/products/multifunctiondevice/default.asp?id={714B7177-2568-4062-ABB3-86214DF98517}
работает всё:
- принтер (gutenprint)
- сканер
- кардридер
Очень приличное качество фотопечати. Собственно агрегат таков, что и PC ему
не особо нужен. Сам практически всё умеет :-)
СНПЧ для него тоже есть.
--
Artem Zolochevskiy
Kaliningrad, Russia
JID: az@jabber.org
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2007-10-31 6:56 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-10-16 6:37 [Hardware] струйный принтер. что брать? Artem Zolochevskiy
2007-10-16 6:46 ` Genix
2007-10-16 7:29 ` Artem Zolochevskiy
2007-10-16 6:55 ` ALT Linux User
2007-10-16 7:34 ` Artem Zolochevskiy
2007-10-16 8:37 ` ALT Linux User
2007-10-16 9:04 ` Artem Zolochevskiy
2007-10-16 9:16 ` ALT Linux User
2007-10-31 6:56 ` Pavel N. Solovyov
2007-10-16 12:23 ` Michael Shigorin
2007-10-16 19:09 ` ALT Linux User
2007-10-18 20:55 ` Michael Shigorin
2007-10-19 4:27 ` ALT Linux User
2007-10-19 8:00 ` Michael Shigorin
2007-10-16 12:22 ` Michael Shigorin
2007-10-19 8:43 ` Artem Zolochevskiy
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git